Craftsman 315 113913 Operators Manual
CRAFTSMAN Worklight Manual L0812447 CRAFTSMAN Worklight Owner's Manual, CRAFTSMAN Worklight installation guides
315113913 6c9036a7-bb8c-4091-ba59-8b201f19b384 Craftsman Work Light 315.113913 User Guide |
2015-01-05
: Craftsman Craftsman-315-113913-Operators-Manual-161314 craftsman-315-113913-operators-manual-161314 craftsman pdf
Open the PDF directly: View PDF .
Page Count: 8
Download | |
Open PDF In Browser | View PDF |
PERATOR'S MAN AL ® 19.2 VOLT WORKUGHT Model No. 315.113913 BATTERIES AND CHARGERS SOLD SEPARATELY ,_ WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA cOus Visit the Craftsman web page: www.sears.com/craftsman 983000-712 9-3-08 (REV:05) Save this manual for future reference [] Warranty .......................................................................................................................................................................... 2 [] Introduction ..................................................................................................................................................................... 2 [] General Safety Rules .................................................................................................................................................... 3-4 [] Symbols ........................................................................................................................................................................... 5 [] Operation ......................................................................................................................................................................... 6 [] Maintenance .................................................................................................................................................................... 7 [] Parts Ordering/Service ..................................................................................................................................... ONE-YEAR FULL WARRANTY ON CRAFTSMAN Back Page TOOL If this Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN iT TO ANY SEARS STORE OR OTHER CRAFTSMAN OUTLET iN THE UNITED STATES FOR FREE REPLACEMENT. If this Craftsman tool is used for commercial purchase. or rental purposes, this warranty applies for only 90 days from the date of This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., Hoffman Estates, IL 60179 This worklight has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate. PORTANT SAFETY I ST A A A WARNING. wREAD AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. WARNING. wWhen using electric appliances, basic precautions should always be followed, including the following: WARNING: The lens gets very hot during use. To reduce the risk of burns, do not touch a hot lens. [] Read all the instructions before using the appliance. [] To reduce the risk of injury, close supervision is necessary when an appliance is used near children. [] Do not use outdoors. [] To reduce the risk of electrical shock, do not put flashlight or charger in water or other liquid. Do not place or store appliance where it can fall or be pulled into atub or sink. [] Use only the charger to recharge. supplied by the manufacturer [] Use only recommended battery pack. Any attempt to use another battery pack will cause damage to your worklight and could possibly explode, cause a fire, or personal injury. MODEL BATTERY PACK (M-ion) CHARGER 315.113710 (130156001) (Multi-Chemistry) 315.259260 (140351001) 315.113740 (130285003) (130285006) 315.113913 BATTERY PACK (Ni-Cd} 130279003, 130279005 (Item No._11375) . 315.259260 (140351001) 1425301 _11041) 315.115730 (140301003) 140107001 [] Remove battery pack from worklight before replacing bulb or performing any routine maintenance or cleaning. Replace bulb with same type rated 19.2 V, 0.6 Amp. [] Do not disassemble the worklight. [] Do not place worklight or battery pack near fire or heat. They may explode. Also, do not dispose of a worn out battery pack by incinerating. Do not incinerate the battery, even if it is severely damaged or completely worn out. The battery may explode in fire. [] Do not operate worklight or charger near flammable liquids or in gaseous or explosive atmospheres. Internal sparks may ignite fumes. [] Do not store your worklight in a damp or wet location. Do not store in locations where the temperature is less than 50°F or more than 100°R Do not store in outside sheds or in vehicles. [] Do not permit children to use worklight unsupervised. It is not a toy. The temperature of the bulb will become hot after being on for only a short period of time. This hot temperature can cause burn injury if touched and can create sufficient heat to melt some fabrics. [] If wrapped or in contact with fabrics, the worklight lens can produce sufficient heat to melt some fabrics. To avoid serious personal injury, never allow the worklight lens to come in contact with anything. [] Keep light dry, clean, and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any strong solvent to clean the worklight. [] Don't expose worklight to rain. Water entering a power tool will increase the risk of electric shock or malfunction. [] Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the worklight in unexpected situations. Do not use on a ladder or unstable support. WORKLIGHT [] This product USE AND CARE is for household use only. [] Store worklight out of the reach of children and other untrained persons. Worklights are dangerous in the hands of untrained users. [] Let worklight cool for several minutes before changing the bulb. after use [] Do not use or permit use of worklight in bed or sleeping bags. This worklight lens can melt fabric and a burn injury could result. SAFETY [] RULES FOR BATTERY WORKLIGHTS Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water, then neutralize with lemon juice or vinegar. If liquid gets in your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. [] Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately. [] Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately. Failure to heed this warning can result in serious personal injury. [] If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service center to avoid risk. [] Save these instructions. Refer to them frequently and use them to instruct others who may use this power tool. If you loan someone this power tool, loan them these instructions also. Someof the followingsymbolsmaybe usedonthis worklight.Pleasestudythemandlearntheirmeaning.Proper interpretation ofthesesymbolswillallowyouto operatetheworklightbetterandsafer. NAME SYMBOL DESIGNATION/EXPLANATION V Volts Voltage A Current Amperes min "x., Minutes Time Alternating Current Type of current Direct Current Type or a characteristic no No Load Speed Rotational speed, at no load [] Class II Construction Double-insulated .../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute @ Wet Conditions Alert Do not expose to rain or use in damp locations. Read The Operator's Manual To reduce the risk of injury, user must read and understand operator's manual before using this product. A Safety Alert Precautions that involve your safety. ® Hot Surfaces To reduce the risk of injury or damage, avoid contact with any hot surface. ===-_ of current construction The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL ,A ,A A SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. CAUTION (Without Safety Alert Symbol) Indicates a situation that may result in property damage. WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the Operator's Manual. If you do not understand the warnings and instructions in the Operator's Manual, do not use this product. Call Customer Service for assistance. SAVE THESE I STRUCTIO _tL WARNING: The safe use of this product requires an understanding of the information on the tool and in this operator's manual. Before use of this product, familiarize yourself with all operating features and safety rules. ROTATE HEADTOTHE DESIRED POSITION MULTI-POSiTION HEAD SWITCH TRIGGER CAUTION: When placing the battery pack in the tool, be sure raised rib on battery pack aligns with the groove in the tool and that the latches snap into place properly. Improper assembly of the battery pack can cause damage to internal components. Fig. 2 BATTERY PACK LATCHES DEPRESSBUTTON PULLLENSCOVER FORWARDTO REMOVE DEPRESSLATCHESTO RELEASEBATTERYPACK ALIGN RAISEDRiBS WiTH GROOVEINSIDEWORKLIGRTBASE; SLIDETOGETHERUNTILLATCHESCLICK. Fig. 1 BATTERY PROTECTION FEATURES DieHardo 19.2 V lithium-ion battery packs are designed with features that protect the lithium-ion cells and maximize battery life. If the tool stops during use, release the trigger to reset and resume operation. If the tool still does not work, the battery needs to be recharged. Fig. 3 BUTTON BULBREPLACEMENT BULB STORAGE AREA SPRING Replace the bulb with the same type rated 19.2 V, 0.6 Amp. Always ask for replacement bulb number 7811502. SLOT SLOT TABS BULB LENSCOVER PULLCOOLEDBULBFROMSPRING; PUSHNEW BULBINTO SPRING. TO REPLACELENSCOVER,ALIGNTABSINSIDE LENS COVERWiTH SLOTSON HOUSING;SNAPiNTO PLACE. Fig. 4 BATTERIES BATTERY This product will accept DieHard_ 19.2 V lithium-ion battery packs and Craftsman 19.2 V nickel-cadmium battery packs. FOR RECYCLING [] Store battery packs in a "discharged" condition. REMOVAL AND PREPARATION To preserve natural resources, please recycle or dispose of batteries properly. The batteries for this product have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn. To obtain the longest possible battery life, we suggest the following: For lithium-ion batteries: [] Remove the battery pack from the charger once it is fully charged and ready for use. For battery pack storage longer than 30 days: [] Store the battery pack where the temperature is below 80°F and away from moisture. [] Store battery packs in a 30%-50% charged condition. [] Every six months of storage, charge the pack as normal. For nickel-cadmium batteries: [] Remove the battery pack from the charger once it is fully charged and ready for use. For battery pack storage longer than 30 days: [] Store the battery pack where the temperature is below 80°R PACK This product uses nickel-cadmium and lithium-ion batteries. Local, state or federal laws may prohibit disposal of batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options. A WARNING: Upon removal, cover the battery pack's terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Lithium-ion and nickelcadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury. Your Home For expert troubleshooting ÷a and home solutions advice g÷ www.managemyhome.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME ® (1-800-469-4663) Call anytime, day or night (U.S.A. and Canada) www.sears.com www.sears.ca Our Home For repair of carry-in items like vacuums, lawn equipment, and electronics, call anytime for the location of your nearest Sears Parts & Repair Service 1-800-488-1222 (U.S.A.) 1-800-469-4663 www.sears.com To purchase a protection 1-800-827-6655 agreement on a product serviced by Sears: 1-800-361-6665 Para pedir servicio de reparaci6n a domicilio, y para ordenar piezas: Au Canada Trademark / TM Trademark / SMService (Canada) pour service en frangais: 1-800-LE-FOYER ® Mc (1-800-533-6937) www.sears.ca (1-888-784-6427) ® Registered (Canada) www.sears.ca (U.S.A.) 1-888-SU-HOGAR Center Mark of Sears ® Marca Registrada / TM Marca de Fabrica / SM Marca de Servicio MC Marque de commerce / MD Marque d6posee de Sears Brands, Brands, de Sears LLC LLC Brands, LLC © Sears Brands, LLC
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 8 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 4, 0, 0, 13 Create Date : Fri Jan 02 04:13:27 2009 Author : Title : Subject :EXIF Metadata provided by EXIF.tools