Craftsman Folding Framer Instruction Manual

: Craftsman Craftsman-Folding-Framer-Instruction-Manual-661831 craftsman-folding-framer-instruction-manual-661831 craftsman pdf

Open the PDF directly: View PDF .
Page Count: 1

Download
Open PDF In Browser	View PDF

OTHER SIMPLE USES: 3

COMMON RAFTER LAYOUT: 2

ADJUSTING BACK TO SQUARE: 1

ADJUSTING BACK TO SQUARE: 2

Use the included tab to mark multiple
blocks quickly and consistently.

Use the Framing Wizard to mark the
rafter seat pitch and plumb height.

Open the Framing Wizard arm as far as
possible, place on a wide board and draw
a single line.

Flip the Framing Wizard in the opposite
direction, align the top of the arm to the
first line and draw a second line.

19

4

11

12

20

3

CK

OTHER SIMPLE USES: 4

COMMON RAFTER LAYOUT: 1

TABLE OF CONTENTS

Swanson’s Limited Warranty
2

Common Rafter Layout

3

Hip/Valley Rafter Layout

5

Using the Chart

9

Adjusting Back To Square

11

Adjusting Arm Tension

16

Other Simple Uses

17

DISCLAIMER: Swanson Tool Co., Inc. is not
responsible for any omissions that may occur in
the production of this reference book.

Swanson Tool
LIMITED WARRANTY:
Co., Inc. warrants its products to be free
from defects in material and workmanship
for 1 year from the date of original
purchase. Swanson's only liability under
this limited warranty shall be at our option
to repair or replace any product determined
by Swanson to be defective No damages
or other remedies available.

ã 2002 Swanson Tool Co., Inc.

23

HIP/VALLEY RAFTER LAYOUT: 4

12" On Center Layout

ADJUSTING BACK TO SQUARE: 5

1

Mark both sides of arm for the double
45-degree bevel cuts.

16" On Center Layout

Tighten or loosen the setscrew to adjust
the arm until it is centered between the
two lines drawn. The Framing Wizard is
now square.
15

Find angles and cut siding accurately so
the finished work will look great.

Swanson Tool Co., Inc.
211 Ontario Street
Frankfort, Illinois 60423
Phone: 815.469.9453
Fax: 815.469.4575
www.swansontoolco.com

Quickly find an existing pitch by using a
level.

Simply adjust arm edge until it aligns with
the desired common pitch on the scale.
The picture above is a 10 common pitch.

OTHER SIMPLE USES: 7

8

7
Next, align the center of the hole in the
arm over and the single short line as
shown.
HIP/VALLEY RAFTER LAYOUT: 3

16
The amount of tension applied to the arm
can be adjusted by simply turning the
lock nut, which holds the arm in place.
ADJUSTING THE ARM TENSION



---

Source Exif Data:

File Type                       : AI
File Type Extension             : ai
MIME Type                       : application/vnd.adobe.illustrator
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 1
Creator Version                 : 10
Container Version               : 9
For                             : lenono, 12
Create Date                     : 4/29/2005 9:05 AM
Bounding Box                    : 0 0 1016 1049
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:db308aab-a147-4d54-8197-6e5783db785d
Producer                        : Adobe PDF library 5.00
Keywords                        : 
Modify Date                     : 2007:05:16 14:11:26-05:00
Creator Tool                    : Adobe Illustrator 10.0
Metadata Date                   : 2007:05:16 14:11:26-05:00
Document ID                     : uuid:dc5a7126-afce-4221-82e4-87e8fb3c3972
Format                          : application/pdf
Description                     : 
Title                           : 
Creator                         : 
Author                          : 
Subject                         : 
Image Height                    : 1049
Image Width                     : 1016
Image Size                      : 1016x1049
Megapixels                      : 1.1

EXIF Metadata provided by EXIF.tools