Craftsman Snow Cab For Tractors Source 247 Owners Manual
2015-03-28
: Craftsman Craftsman-Snow-Cab-For-Tractors-Source-247-Owners-Manual-662085 craftsman-snow-cab-for-tractors-source-247-owners-manual-662085 craftsman pdf
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Operator's Manual ® Snow Cab Model No. 486.24277 CAUTION: Before using this product, read this manual and follow all Safety Rules and Operating Instructions. STOP DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-866-576-8388 • • • • • Safety Assembly Operation Maintenance Parts Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com/craftsman PRINTED IN U.S.A. FORM NO. 41366 (12/08/09) safety rules Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times, when using power equipment. • • • • This cab provides foul weather protection only. It does not provide protection against exhaust fumes, collision, rollover or other accidents. Read the snow cab and vehicle owner's manuals and know how to operate your vehicle before using the snow cab attachment. Be sure there is adequate ventilation when using the tractor and snow cab in confined areas. • • The snow cab will restrict your field of vision in some directions. Use extra caution when operating your tractor with the snow cab attached. Watch out for low tree limbs or other overhead obstructions that may not previously have interfered with operation of the tractor. The extra height of the snow cab may cause these objects to become obstacles. Check the area of operation thoroughly before using the tractor. Look for this symbol to point out important safety precautions. It means — Attention!! Become alert!! Your safety is involved. WARRANTY CRAFTSMAN ONE-YEAR FULL WARRANTY When assembled, operated and maintained according to the supplied instructions, if this product fails due to a defect in material or workmanship within one year from the date of purchase, return it to any Sears store or other Craftsman outlet in the United States for free replacement. This warranty is void if this product is ever used for commercial or rental purposes. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., D817WA, Hoffman Estates, IL 60179 carton contents 1. 2. 3. Base Assembly Weight Bracket Drawbar Bracket 4. 5. 6. U-Tube Upright Tubes (2) Rope 7. 8. 9. Support Rods (3) Top Tubes (2) Vinyl Canopy Parts Bag (see page 3) 6 4 7 8 5 1 9 2 3 2 HARDWARE PACKAGE SHOWN FULL SIZE E A B C D G H F NOT SHOWN FULL SIZE I REF. A B C D E F QTY. 1 2 4 8 2 4 DESCRIPTION Hex Bolt, 5/8" x 1-3/4" Carriage Bolt, 5/16 x 2" Hex Bolt, 1/4 x 1-1/2" Hex Bolt, 5/16" x 1" Flat Washer, 5/16" Nylock Nut, 1/4" J REF. G H I J K 3 QTY. 8 1 4 2 2 K DESCRIPTION Nylock Nut, 5/16" Nylock Nut, 5/8" Spiral Hook Footrest Clamp Plastic Knob ASSEMBLY LOCATE MODEL LABEL OF TRACTOR • STEP 1: (SEE FIGURE 1) Look under your tractor seat and locate the serial number as shown. Refer to the chart below and check that your tractor is compatible. • Assemble the drawbar bracket to the base assembly using four 5/16" x 1" hex bolts and 5/16" nylock nuts. See figure 3. Do not tighten yet. • Attach the weight bracket to the base assembly using four 5/16" x 1" hex bolts and 5/16" nylock nuts. Note: The weight bracket holds up to three suitcase type weights to improve traction. Purchase weights separately. ® MODEL SERIAL WEIGHT BRACKET 247. 000000 BASE ASSEMBLY 000000A000000 193653 COMPATIBLE MODEL NUMBERS 247.28906 247.28981 247.28980 247.28875 247.28672 DRAWBAR BRACKET 5/16" x 1" HEX BOLT 5/16" NYLOCK NUT FIGURE 1 STEP 2: (SEE FIGURE 2) • Hook the base assembly under the shoulder bolts on the sides the tractor frame using the front notches in the base assembly. Align the hole in the bottom of the base assembly with the hole in the tractor drawbar. Insert the 5/8" x 1-3/4" hex bolt and secure it with the 5/8" nylock nut. Note: The seat may need to be tilted forward on some tractors to ease assembly. TOOLS REQUIRED FOR ASSEMBLY (2) (2) (1) (2) 7/16" Wrenches 1/2" Wrenches 3/4" Wrench 15/16" Wrenches 5/8" x 1-3/4" HEX BOLT REMOVAL OF PARTS FROM TRACTOR • • Remove any rear mounted attachments which may be installed on your tractor Mark and save all removed parts. 5/8" NYLOCK NUT SHOULDER BOLT 4 FIGURE 2 STEP 3: (SEE FIGURE 3) • STEP 5: (SEE FIGURE 5) Assemble the upright tubes to the base assembly using two 5/16-18 x 2" carriage bolts (from outside) and two 5/16" flat washers and plastic knobs (from inside). PLASTIC KNOB • • 5/16" x 2" CARRIAGE BOLT Install a footrest clamp with preassembled bolt onto the front edge of each footrest, with the bolt underneath the footrest. Raise the tractor's hood. Place the snow cab canopy onto the tubing frame, draping the front flap down in front of the tractor's dash panel. Lower the hood, trapping the front flap under the hood. Secure the sides of the canopy by fastening the elastic hooks to the bottom edge of the footrest and fender. Levers or handles on snowthrowers and snow blades should be located outside of the cab. 5/16" FLAT WASHER FIGURE 3 RAISE HOOD STEP 4: (SEE FIGURE 4) • • • FRONT FLAP Assemble the top tubes to the upright tubes using two 1/4" x 1-1/2" hex bolts (from outside) and two 1/4" nylock nuts (inside). Do not tighten yet. Fit the front U-tube onto the top tubes. Fasten the tubes together using two 1/4" x 1-1/2" hex bolts (on outside) and two 1/4" nylock nuts (on inside). Tighten all loose bolts. Fit the three support rods into the holes in the top tubes, with the rods arching upward. Do not over bend the rods when installing. 1/4" x 1-1/2" HEX BOLT 1/4" NYLOCK NUT 1/4" x 1-1/2" HEX BOLT ELASTIC HOOKS FOOTREST CLAMP FIGURE 5 SUPPORT ROD 1/4" NYLOCK NUT FIGURE 4 5 STEP 6: (SEE FIGURE 6) • • OPERATION Assemble two spiral hooks into holes on top of u-tube at front of tubing frame. Insert ends of rope down through spiral hooks attached to u-tube and then insert ends through two grommets in front of canopy. Read this owner's manual and safety rules before operating your tractor with the Snow Cab. CAUTION: Watch out for low tree limbs and other overhead objects which may interfere with the snow cab. SPIRAL HOOKS CAUTION: This cab provides foul weather protection only. It does not provide protection against exhaust fumes, collision, rollover or other accidents. ROPE CAUTION: Never transport the tractor in an open truck or open trailer while the snow cab is attached. • GROMMETS • FIGURE 6 • STEP 7: (SEE FIGURE 7) • • • • Insert one end of rope through a third spiral hook and tie a knot in end of rope. Assemble spiral hook with rope attached through hole in footrest clamp. Insert other end of rope through remaining spiral hook. Tie a knot in end of rope so that when hooked to other footrest clamp the rope is tight and canopy frame is stable. • MAINTENANCE • • • ROPE SPIRAL HOOK Before each use make a thorough visual check of the snow cab for any bolts and nuts which may have loosened. Retighten any loose bolts and nuts. The vinyl portion of the canopy can be washed using water only, or a mild liquid soap and water. The plastic windows should only be washed using running water, or a mild liquid soap and water. Wash the windows with your bare hands only. A cloth, sponge or brush will scratch the clear plastic. IMPORTANT: Never clean the windows when the plastic is dry. The clear plastic will scratch. • FOOTREST CLAMP • FIGURE 7 Check the area of operation thoroughly before using the tractor with the snow cab. The added height of the snow cab and a reduced field of vision require extra caution during operation. Enter the snow cab on the left side at the rear. Unfasten the elastic hook at the bottom and the velcro fastener in the top in the rear corner. Operate outside controls on a snowthrower or snow blade through the access flaps in the sides of the canopy. Up to three suitcase type weights can be added to the weight bracket on the snow cab to increase traction of the rear tires. Remove the upper snow cab frame and canopy before you transport the tractor in an open truck or open trailer. 6 Clean the vinyl canopy thoroughly and allow to dry before storing. Refer to the Cleaning section. Store the snow cab in a clean, dry area away from direct sun light. REPAIR PARTS ILLUSTRATION 486.24277 Snow Cab 5 3 3 4 16 12 17 17 11 6 2 2 10 9 8 1 15 17 19 18 13 17 18 21 13 20 19 20 7 REF. NO. 1 2 3 4 5 6 7 8 9 10 11 PART NO. 64717 25014 25013 25012 25015 48895 25141 43720 44977 43081 43648 QTY. 1 2 2 1 3 1 1 2 2 2 4 DESCRIPTION Base Assembly Upright Tube Top Tube U-Tube Support Rod Vinyl Canopy Drawbar Bracket Plastic Knob Carriage Bolt, 5/16-18 x 2" Flat Washer, 5/16" Hex Bolt, 1/4-20 x 1-1/2" REF. PART QTY. NO. NO. 12 47189 4 13 46703 2 14 712-0261 1 15 25703 1 16 49017 1 17 49016 4 18 64802 2 19 47810 8 20 43063 8 21 47951 1 49829 1 7 14 DESCRIPTION Nylock Nut, 1/4-20 Hex Bolt, 5/16-18 x 3/4" Self Thd. Hex Nut, 5/8-11 Nylock Weight Bracket Rope Spiral Hook Footrest Clamp Nylock Nut 5/16-18 Hex Bolt, 5/16-18 x 1" Hex Bolt, 5/8-11 x 1-3/4" Owner's Manual Get it fixed, at your home or ours! Your Home For expert troubleshooting and home solutions advice: www.managemyhome.com For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME® (1-800-469-4663) Call anytime, day or night (U.S.A. and Canada) www.sears.com www.sears.ca Our Home For repair of carry-in items like vacuums, lawn equipment, and electronics, call anytime for the location of your nearest Sears Parts & Repair Service Center 1-800-488-1222 (U.S.A.) www.sears.com 1-800-469-4663 (Canada) www.sears.ca To purchase a protection agreement on a product serviced by Sears: 1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada) Para pedir servicio de reparación a domicilio, y para ordenar piezas: Au Canada pour service en français: 1-888-SU-HOGAR® 1-800-LE-FOYER MC (1-888-784-6427) ® Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC ® Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears Brands, LLC MC Marque de commerce / MD Marque déposée de Sears Brands, LLC (1-800-533-6937) www.sears.ca © Sears Brands, LLC
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2010:01:05 07:41:02-06:00 Metadata Date : 2010:01:05 11:24:38-06:00 Modify Date : 2010:01:05 11:24:38-06:00 Creator Tool : Adobe InDesign CS3 (5.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 8682 bytes, use -b option to extract) Document ID : adobe:docid:indd:b78cb3ed-08d2-11da-b3d5-e9715e47bafa Instance ID : uuid:c523c39a-1bd1-45cf-9790-48279d6ecf66 Rendition Class : proof:pdf Derived From Instance ID : b78cb3e8-08d2-11da-b3d5-e9715e47bafa Derived From Document ID : adobe:docid:indd:b78cb3e7-08d2-11da-b3d5-e9715e47bafa Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:601094ff-a40a-4c47-adcc-d79897664c15, uuid:5209d1bf-7ef0-4fc2-8ff1-a7b88f9c7948, uuid:085ddd60-a920-4332-85af-b5eb53e40702, uuid:01aaddb3-7538-418d-9251-c783a2e2eb1f, uuid:504949e7-1a6d-4641-b8c6-36df6f199779, uuid:5e1baec1-99b2-4075-ade9-7c58f75c5ed6, uuid:5e1baec1-99b2-4075-ade9-7c58f75c5ed6, uuid:698dc89d-afd2-45ee-b2f0-d645d8c131c1, uuid:0a23fc78-54b5-4b6a-b688-da72cb397443, uuid:dedc8b59-eb54-4712-ae42-f6c3d252a29e, uuid:0a98dee1-3e63-4be5-80d8-5413ce82e11f, uuid:905ed3c8-9c72-4221-858e-bc1153b35adf, uuid:fb8b0452-b3d1-40f4-95be-ceab6344beb4, uuid:a72a709c-9be5-44e7-99ae-5742cb4d0f95, uuid:5fa0ca55-02e5-47a1-857a-f97281adc34b, uuid:fdba6af2-265f-40f7-9662-69b4140df6eb, uuid:48e7383b-fe18-4cab-bf91-ab87700a4f6d, uuid:9166c8c2-6998-46dd-928c-c33a845a08ea, uuid:359665ef-d5eb-404c-9e98-f291a3a653fc, uuid:7dad40c8-3590-45c4-8280-1ee5508ad8cb, uuid:aecf8ae1-49d5-447f-8527-85145277eb25 Manifest Reference Document ID : uuid:0c428577-cde1-47e3-a667-0f510ff7dd5a, uuid:0528711AB6DEDE11B972C6703E33B0F3, uuid:0a0f8082-6f53-4582-aa90-f2b8a5309c88, uuid:5355c267-f419-4c3c-b70e-a4c16bf68c63, uuid:08f7c43c-5739-41e8-b894-f30cdcf4f69a, uuid:1ca9be96-d624-48a1-9146-ab0f8a586380, uuid:be4774b9-2841-4dc8-bf4e-d5bb3d5b196a, uuid:56F6A01688DFDE11B972C6703E33B0F3, uuid:962501ed-b552-43c4-8ec1-ac8fc6197c6f, uuid:5355c267-f419-4c3c-b70e-a4c16bf68c63, uuid:5355c267-f419-4c3c-b70e-a4c16bf68c63, uuid:5355c267-f419-4c3c-b70e-a4c16bf68c63, uuid:33bbafcd-9c9a-4bdd-9a58-6d3899b0ad3c, uuid:bdfc524a-2e73-4824-8e81-eafd7990f422 Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 8 Creator : Adobe InDesign CS3 (5.0.4)EXIF Metadata provided by EXIF.tools