Crane Payment Innovations MEICARD3B Easichoice 4 in 1 +Credit Card Bezel User Manual

MEI Easichoice 4 in 1 +Credit Card Bezel

User Manual

CASHFLOW EasiChoice 4 in 1+Installation GuideCASHFLOW EasiChoice 4 in 1+Installation GuideGeneral Information 4 in 1 + 3 Button BezelThe 4 in 1 + bezel kit has been designed to add a cashless RFIDpayment system with Loyalty Card support to a vending machine that usesan MEI bill validator. The 4 in 1 + is also available in a standalone versionwithout the validator.The 4 in 1+ bezel replaces the bezel on the validatorTo remove the validator from the vending machine:1. Remove the four 11/32 nuts located on the back of the validator.2. Remove the 4 screws that hold the old bezel on the validator.Install the 4 in 1+ bezel on the validator and place the validator backinto the vending machine. Tighten the 4 nuts against the validatormounting plate.3. Plug the 4 in 1+ cable into the Advance 5000 socket.Be careful not to pinch or damage the bezel cablewhen installing the 4 in 1+ bezel.A5K 4 in 1 +See the Advance 5000 manual for installation instructions.Contact MEI Technical Support @ 1-800-345-8172 with any questions.Notes:FCC ID: QP8MEICARD3BCAUTION: changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.This device complies with part 15 of the FCC rules. Operation is subject to the following twoconditions: (a) This device may not cause harmful interference, and (b) this device must acceptany interference received, including interference that may cause undesired operation.MEI 3222 Phoenixville Pike, Suite 200, Malvern, Pa. 19355©2013 MEI Inc. www.meigroup.comGeneral Information 4 in 1+ 3 Button BezelThe 4 in 1+ bezel kit has been designed to add a cashless RFIDpayment system with Loyalty Card support to a vending machine thatuses an MEI bill validator. The 4 in 1 + is also available in a standaloneversion without the validator.The 4 in 1+ bezel replaces the bezel on the validator.To remove the validator from the vending machine:1. Remove the four 11/32 nuts located on the back of the validator.2. Remove the 4 screws that hold the old bezel on the validator.Install the 4 in 1+ bezel on the validator and place the validator backinto the vending machine. Tighten the 4 nuts against the validatormounting plate.3. Plug the 4 in 1+ cable into the Advance 5000 socket.Be careful not to pinch or damage the bezel cablewhen installing the 4 in 1+ bezel.A5K 4 in 1+See the Advance 5000 manual for installation instructions.Contact MEI Technical Support @ 1-800-345-8172 with any questions.Notes:FCC ID: QP8MEICARD3BCAUTION: changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.This device complies with part 15 of the FCC rules. Operation is subject to the following twoconditions: (a) This device may not cause harmful interference, and (b) this device must acceptany interference received, including interference that may cause undesired operation.MEI 3222 Phoenixville Pike, Suite 200, Malvern, Pa. 19355©2013 MEI Inc. www.meigroup.com

Navigation menu