Crate Barrel 445 Ellis Four Drawer Chest Assembly Instructions From And

: Crate-Barrel 445-Ellis-Four-Drawer-Chest 445-ellis-four-drawer-chest crate-barrel pdf

Open the PDF directly: View PDF .
Page Count: 3

Download
Open PDF In Browser	View PDF

ELLIS FOUR DRAWER CHEST
HARDWARE

26 - bolts

32 - screws

26 - flat
washers

26 - spring
washers

Missing hardware?
Please call 800.606.6387 for replacements.
Thank you for purchasing the Ellis Four Drawer Chest.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

TOOLS REQUIRED
Phillips head screwdriver

Note: 2 people are required to safely assemble this product.

COMPONENTS

1 - front frame

1 - back panel

1 - left side
panel

1 - right side
panel

1 - top panel

4 - drawer
left side panels

4 - drawer
front panels

Made in Vietnam r04

4 - drawer
bottom panels

4 - drawer
back panels

Customer Service 800.967.6696 | www.crateandbarrel.com

4 - drawer
right side panels

Page 1 of 3

ELLIS FOUR DRAWER CHEST
Make sure the wheels
face towards
the front.

NOTE: Do not over
tighten the bolts.

1 With the assistance of another adult, carefully lay
back panel on padded surface. Fit left and right side
panel onto back panel by aligning pre-assembled
dowels with corresponding holes. Secure with 8
bolts, 8 spring washers, and 8 flat washers, using a
Phillips head screwdriver but do not over tighten.

2 Carefully fit front frame onto assembled unit by
aligning dowels with corresponding holes. As shown,
secure front frame with 8 bolts, 8 spring washers,
and 8 flat washers using a Phillips head
screwdriver.

Make sure the wheels of the
drawer slides face out and
towards the back

3 Carefully place assembled unit upright. Fit top
panel onto assembled unit by aligning dowels with
corresponding holes. Secure top panel with 10
bolts, 10 spring washers, and 10 flat washers using
a Phillips head screwdriver.
Made in Vietnam r04

4 Attach the drawer left side panel to the small
drawer front panel and drawer back panel with 4
screws. Secure with a Phillips head screwdriver.

Customer Service 800.967.6696 | www.crateandbarrel.com

Page 2 of 3

ELLIS FOUR DRAWER CHEST

5 Slide drawer bottom panel into the groove at
the base of the assembly.

6 Attach the drawer right side panel to the assembly
with 4 screws. Secure with a Philllps head screwdriver.
Repeat steps 4-6 for each drawer assembly.

CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

8 Insert 4 drawer assemblies into the case, fitting
wheels of drawer glide into rail of case glides.
Assembly is now complete.
Made in Vietnam r04

Customer Service 800.967.6696 | www.crateandbarrel.com

Page 3 of 3