Crate Barrel 445 Ellis Four Drawer Chest Assembly Instructions From And

: Crate-Barrel 445-Ellis-Four-Drawer-Chest 445-ellis-four-drawer-chest crate-barrel pdf

Open the PDF directly: View PDF .
Page Count: 3

HARDWARE

TOOLS REQUIRED

COMPONENTS

Customer Service 800.967.6696 | www.crateandbarrel.com

Made in Vietnam r04 Page 1 of 3

Thank you for purchasing the Ellis Four Drawer Chest.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ELLIS FOUR DRAWER CHEST

Missing hardware?

Please call 800.606.6387 for replacements.

26 - flat

washers

26 - bolts 32 - screws

1 - back panel

4 - drawer

right side panels

4 - drawer

left side panels

1 - left side

panel

1 - right side

panel

1 - top panel1 - front frame

4 - drawer

front panels

4 - drawer

bottom panels 4 - drawer

back panels

26 - spring

washers

Phillips head screwdriver

ELLIS FOUR DRAWER CHEST

Made in Vietnam r04 Page 2 of 3

1 With the assistance of another adult, carefully lay

back panel on padded surface. Fit left and right side

panel onto back panel by aligning pre-assembled

dowels with corresponding holes. Secure with 8

bolts, 8 spring washers, and 8 flat washers, using a

Phillips head screwdriver but do not over tighten.

2 Carefully fit front frame onto assembled unit by

aligning dowels with corresponding holes. As shown,

secure front frame with 8 bolts, 8 spring washers,

and 8 flat washers using a Phillips head

screwdriver.

3 Carefully place assembled unit upright. Fit top

panel onto assembled unit by aligning dowels with

corresponding holes. Secure top panel with 10

bolts, 10 spring washers, and 10 flat washers using

a Phillips head screwdriver.

4 Attach the drawer left side panel to the small

drawer front panel and drawer back panel with 4

screws. Secure with a Phillips head screwdriver.

Customer Service 800.967.6696 | www.crateandbarrel.com

NOTE: Do not over

tighten the bolts.

Make sure the wheels of the

drawer slides face out and

towards the back

4 Attach the small drawer side panel to the small drawer front

panel and small drawer back panel with 4 short wood screws.

Make sure the wheels

face towards

the front.

ELLIS FOUR DRAWER CHEST

Made in Vietnam r04 Page 3 of 3

5 Insert bottom drawer panel into grooves on

assembled drawer unit.

6 Attach back drawer panel onto assembled

drawer unit by aligning pre-assembled dowels with

corresponding holes. Secure back drawer panel with

4 screws with a Phillips head screwdriver.

7 Attach handle to front drawer panel with 3

handle screws. Secure with Phillips head

screwdriver, but do not over tighten. Repeat steps

4-7 for each drawer assembly.

8 Insert 4 drawer assemblies into the case, fitting

wheels of drawer glide into rail of case glides.

Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as the

wood is finished with a protective clear lacquer.

Customer Service 800.967.6696 | www.crateandbarrel.com

5 Slide drawer bottom panel into the groove at

the base of the assembly.

6 Attach the drawer right side panel to the assembly

with 4 screws. Secure with a Philllps head screwdriver.

Repeat steps 4-6 for each drawer assembly.