Crate Barrel 478 Form Chair Form_Chair

: Crate-Barrel 478-Form-Chair 478-form-chair crate-barrel pdf

Open the PDF directly: View PDF .
Page Count: 2

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Thailand - r02 Page 1 of 2

1 Place back frame onto a clean, padded surface. Fit

pre-assembled dowels of left and right side rails into

corresponding holes of back frame. Secure left and

right side rails to back frame with 2 flat washers, 2

spring washers and 2 bolts per rail as shown, using an

allen wrench. Do not over tighten the bolts.

Thank you for purchasing the Form Chair. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

FORM CHAIR

8 - bolts 4 - screws

1 - front leg

frame

1 - seat

2 - side rails

(1 left, 1 right)

1 - back frame

back frame

left side

rail

8 - spring

washers

8 - flat

washers

2 - brackets

right side

rail

Missing hardware? Please call

800.606.6387 for replacements.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

(We recommend the use of hand tools instead of power tools)

allen wrench

(included)

phillips head screwdriver

Made in Thailand - r02 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

FORM CHAIR

Page 2 of 2

3 Attach seat to assembled unit with 2 brackets. Secure

each bracket with 2 screws as shown, using a phillips

head screwdriver. Make sure to attach bracket where

pre-drilled holes are on left and right side rails. Do not over

tighten the screws. Position assembled unit upright.

Assembly is now complete.

NOTE: Do not over

tighten the screws

NOTE: Make sure to attach

brackets at pre-drilled holes

are on left and right side rails.

2 Fit pre-assembled dowels of left and right side rails

into corresponding holes of front leg frame. Secure

front leg frame to left and right side rails with 2 flat

washers, 2 spring washers and 2 bolts per side as

shown.

front leg

frame

seat

bracket

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.

Do not use abrasive cleaners. Periodically

tighten bolts as necessary.