Crate Barrel 478 Form Chair Form_Chair

: Crate-Barrel 478-Form-Chair 478-form-chair crate-barrel pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

FORM CHAIR
HARDWARE

8 - bolts

4 - screws

8 - spring
washers

8 - flat
2 - brackets
washers

Missing hardware? Please call
800.606.6387 for replacements.

Thank you for purchasing the Form Chair. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.

TOOLS REQUIRED

allen wrench
(included)

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

COMPONENTS
right side
rail

1 - seat

1 - front leg
frame

back frame
left side
rail

1 - back frame

2 - side rails
(1 left, 1 right)

Made in Thailand - r02

1 Place back frame onto a clean, padded surface. Fit
pre-assembled dowels of left and right side rails into
corresponding holes of back frame. Secure left and
right side rails to back frame with 2 flat washers, 2
spring washers and 2 bolts per rail as shown, using an
allen wrench. Do not over tighten the bolts.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Page 1 of 2

FORM CHAIR
NOTE: Do not over
tighten the screws

front leg
frame

bracket

seat

2 Fit pre-assembled dowels of left and right side rails
into corresponding holes of front leg frame. Secure
front leg frame to left and right side rails with 2 flat
washers, 2 spring washers and 2 bolts per side as
shown.

NOTE: Make sure to attach
brackets at pre-drilled holes
are on left and right side rails.

3 Attach seat to assembled unit with 2 brackets. Secure
each bracket with 2 screws as shown, using a phillips
head screwdriver. Make sure to attach bracket where
pre-drilled holes are on left and right side rails. Do not over
tighten the screws. Position assembled unit upright.
Assembly is now complete.

CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Periodically
tighten bolts as necessary.

Made in Thailand - r02

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Page 2 of 2