Crate Barrel 517 Havana Side Table Assembly Instructions From And

: Crate-Barrel 517-Havana-Side-Table 517-havana-side-table crate-barrel pdf

Open the PDF directly: View PDF .
Page Count: 3

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

1 Place tabletop assembly upside down on a padded

surface. Remove drawer by pivoting drawer stop into an

upright position as illustrated. Slide drawer out and set

aside.

Thank you for purchasing the Havana Side Table. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

COMPONENTS

2 - leg frames

(1 left, 1 right)

1 - table top

assembly

TOOLS REQUIRED

Phillips head screwdriver (included)

HAVANA SIDE TABLE

Page 1 of 3

Made in Indonesia - r03

Missing hardware? Please call 800.606.6387 for

replacements.

8 - flat head

screws

4 - round head

screws

2 - wood dowels

1 - shelf

Customer Service 800-967-6696 | http://www.crateandbarrel.com

5 Align wood dowels of leg frames with corresponding

holes in the table top and fit into position.

HAVANA SIDE TABLE

Page 2 of 3

Made in Indonesia - r03

2 Insert 1 wood dowel in the right and left leg frames

as shown.

4 Fit right leg frame into position and loosely attach

with 2 round head screws. Do not fully tighten the

screws.

3 Place shelf into position, aligning holes in metal corner

brackets with holes in left leg frame. Loosely attach 2

round head screws through brackets and into the legs.

Do not fully tighten screws.

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HAVANA SIDE TABLE

Page 3 of 3

Made in Indonesia - r03

6 A. Secure leg frames with 4 flat head screws per leg

frame. Fully tighten each bolt with a phillips head

screwdriver.

B. At this point fully tighten all 4 round head screws that

attach the shelf with a phillips head screwdriver.

8 Rotate drawer stop 180º to prevent drawer from being

removed. With the assistance of another adult place the

table upright. Assembly is now complete.

7 Slide drawer back into table top assembly, fitting slots

on drawer sides onto rails.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as the

wood is finished with a protective clear lacquer.

B

A