Crate Barrel 517 Havana Side Table Assembly Instructions From And

: Crate-Barrel 517-Havana-Side-Table 517-havana-side-table crate-barrel pdf

Open the PDF directly: View PDF .
Page Count: 3

Download
Open PDF In Browser	View PDF

HAVANA SIDE TABLE
HARDWARE

4 - round head
screws

8 - flat head
screws

2 - wood dowels

Missing hardware? Please call 800.606.6387 for
replacements.

Thank you for purchasing the Havana Side Table. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this
product.

TOOLS REQUIRED
Phillips head screwdriver (included)

COMPONENTS

1 - table top
assembly

1 - shelf

2 - leg frames
(1 left, 1 right)

1 Place tabletop assembly upside down on a padded
surface. Remove drawer by pivoting drawer stop into an
upright position as illustrated. Slide drawer out and set
aside.
Page 1 of 3

Made in Indonesia - r03

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HAVANA SIDE TABLE

2 Insert 1 wood dowel in the right and left leg frames
as shown.

4 Fit right leg frame into position and loosely attach
with 2 round head screws. Do not fully tighten the
screws.

3 Place shelf into position, aligning holes in metal corner
brackets with holes in left leg frame. Loosely attach 2
round head screws through brackets and into the legs.
Do not fully tighten screws.

5 Align wood dowels of leg frames with corresponding
holes in the table top and fit into position.

Page 2 of 3

Made in Indonesia - r03

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HAVANA SIDE TABLE
B

A
6 A. Secure leg frames with 4 flat head screws per leg
frame. Fully tighten each bolt with a phillips head
screwdriver.
B. At this point fully tighten all 4 round head screws that
attach the shelf with a phillips head screwdriver.

7 Slide drawer back into table top assembly, fitting slots
on drawer sides onto rails.

CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

8 Rotate drawer stop 180º to prevent drawer from being
removed. With the assistance of another adult place the
table upright. Assembly is now complete.
Page 3 of 3

Made in Indonesia - r03

Customer Service 800-967-6696 | http://www.crateandbarrel.com