Crate Barrel 570 Kingston Sliding Door Coffee Table Assembly Instructions From And

: Crate-Barrel 570-Kingston-Sliding-Door-Coffee-Table 570-kingston-sliding-door-coffee-table crate-barrel pdf

Open the PDF directly: View PDF .
Page Count: 2

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r04 Page 1 of 2

Thank you for purchasing the Kingston Sliding Door

Coffee Table. This page lists all the contents included

in the box. Please take time to identify the hardware as

well as the individual components of this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect them

from damage.

Note: 2 people are required to safely assemble this product.

KINGSTON SLIDING DOOR COFFEE TABLE

Missing hardware? Please call 800.606.6387

for replacements.

12 - bolts

2 - side panels

(1 left, 1 right)

1 - top panel

2 - doors

(1 left, 1 right)

1 - back panel

1 - bottom panel

12 - spring

washers

12 - flat

washers

6 - cams 6 - cam

screws

Phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

KINGSTON SLIDING DOOR COFFEE TABLE

Made in China - r04 Page 2 of 2

1 Insert 2 cam screws into back panel as shown.

Secure, but do not over tighten with a phillips head

screwdriver. Insert 2 cams into bottom panel as shown.

Make sure arrow on each cam points towards nearest

edge with holes. Fit cam screws and dowels of back

panel into corresponding holes of bottom panel. With a

screwdriver, turn each cam clockwise until it securely

engages each cam screw.

2 A) Insert 4 cams into bottom panel as shown. Insert 2 cam

screws into each left and right side panel as shown.

B) Fit left and right side panel onto back and bottom panel

assembly by fitting cam screws and dowels into corresponding

holes as shown. With a screwdriver, turn each cam clockwise until

it securely engages each cam screw. Secure side panels with 4

bolts, 4 spring washers, and 4 flat washers as shown, using a

screwdriver.

Make sure arrow on each

cam points towards nearest

edge with holes.

3 With the assistance of another adult, carefully

attach top panel onto assembled unit as shown with 8

bolts, 8 spring washers and 8 flat washers.

4 With the assistance of another adult, carefully place unit

upright. Insert bottom edge of right door into bottom back

groove of unit as shown. Press and hold down both levers

(located at the back of door) to insert top edge of door into

top back groove of unit. Release levers to secure door.

Repeat for left door using the front groove of unit.

Assembly is now complete.

A

B

right

side door

left

side door

A

B

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as the

wood is finished with a protective clear lacquer.

Customer Service 800.967.6696 | www.crateandbarrel.com