Crate Barrel 570 Kingston Sliding Door Coffee Table Assembly Instructions From And

: Crate-Barrel 570-Kingston-Sliding-Door-Coffee-Table 570-kingston-sliding-door-coffee-table crate-barrel pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

KINGSTON SLIDING DOOR COFFEE TABLE
HARDWARE

Thank you for purchasing the Kingston Sliding Door
Coffee Table. This page lists all the contents included
in the box. Please take time to identify the hardware as
well as the individual components of this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.

12 - bolts

12 - spring
washers

6 - cams

6 - cam
screws

12 - flat
washers

Missing hardware? Please call 800.606.6387
for replacements.

TOOLS REQUIRED
Phillips head screwdriver

Note: 2 people are required to safely assemble this product.

COMPONENTS

1 - top panel

2 - side panels
(1 left, 1 right)
1 - back panel

1 - bottom panel
2 - doors
(1 left, 1 right)
Made in China - r04

Customer Service 800.967.6696 | www.crateandbarrel.com

Page 1 of 2

KINGSTON SLIDING DOOR COFFEE TABLE
B

A
B

A

Make sure arrow on each
cam points towards nearest
edge with holes.

1 Insert 2 cam screws into back panel as shown.
Secure, but do not over tighten with a phillips head
screwdriver. Insert 2 cams into bottom panel as shown.
Make sure arrow on each cam points towards nearest
edge with holes. Fit cam screws and dowels of back
panel into corresponding holes of bottom panel. With a
screwdriver, turn each cam clockwise until it securely
engages each cam screw.

2 A) Insert 4 cams into bottom panel as shown. Insert 2 cam
screws into each left and right side panel as shown.
B) Fit left and right side panel onto back and bottom panel
assembly by fitting cam screws and dowels into corresponding
holes as shown. With a screwdriver, turn each cam clockwise until
it securely engages each cam screw. Secure side panels with 4
bolts, 4 spring washers, and 4 flat washers as shown, using a
screwdriver.

right
side door

left
side door

4 With the assistance of another adult, carefully place unit
upright. Insert bottom edge of right door into bottom back
groove of unit as shown. Press and hold down both levers
(located at the back of door) to insert top edge of door into
top back groove of unit. Release levers to secure door.
Repeat for left door using the front groove of unit.
Assembly is now complete.
3 With the assistance of another adult, carefully
attach top panel onto assembled unit as shown with 8
bolts, 8 spring washers and 8 flat washers.
Made in China - r04

CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

Customer Service 800.967.6696 | www.crateandbarrel.com

Page 2 of 2