Crate Barrel 756 Parallel Desk Assembly Instructions From And

: Crate-Barrel 756-Parallel-Desk 756-parallel-desk crate-barrel pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

PARALLEL DESK
HARDWARE

8 - allen head screws

6 - wood screws

6 - washers

8 - tube caps

Missing hardware? Please call 800.606.6387 for
replacements.

TOOLS REQUIRED
Thank you for purchasing the Parallel Desk. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this
product.

Allen wrench (included)
Phillips head screwdriver
Hammer

COMPONENTS

x2

1 - table top

B
Tabs flush
to floor

2 - crossbars

A
2 - leg frames

1 A. Insert 1 tube cap into the top of each leg.
B. Position 1 leg frame as shown and fit brackets into open
tube ends of the 2 crossbars. Make sure tabs of crossbars
are positioned as shown, flush with the floor.
C. Align holes in brackets with holes in cross bars and loosely
attach with 2 allen head screws. Do not fully tighten screws.
Page 1 of 2

Made in China - r05

Customer Service 800-967-6696 | http://www.crateandbarrel.com

PARALLEL DESK
B

x2

A
2 A. Insert 1 tube cap into the top of each leg in the
remaining leg frame.
B. Attach leg frame using same method as in Step 1.
Secure each crossbar with 2 allen head screws. Do not
fully tighten screws.

3 Position frame assembly onto table top, aligning holes in
tabs with pre-drilled holes in table top. Using a phillips
head screwdriver, secure each tab with 1 wood screw and
1 washer.

x8

5 At this point, fully tighten all 8 allen head screws with
the allen wrench.
Assembly is now complete.
4 Insert 1 tube cap into the open end of each leg. If
necessary, gently tap each tube cap into position with a
hammer.

CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Page 2 of 2

Made in China - r05

Customer Service 800-967-6696 | http://www.crateandbarrel.com