Crate Barrel 760 Parker Spirits Cabinet

: Crate-Barrel 760-Parker-Spirits-Cabinet 760-parker-spirits-cabinet crate-barrel pdf

Open the PDF directly: View PDF .
Page Count: 4

PARKER SPIRITS CABINET

Made in China - r05 Page 1 of 4

Thank you for purchasing the Parker Spirits Cabinet.

This page

lists all the contents included in the box.

Please take the time

to identify the hardware as well as

the individual components

to this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this

product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for replacements.

HARDWARE

COMPONENTS

1 - right

frame

4 - legs

1 - drawer assembly

1 - bottom frame

phillips head screwdriver

12 - large

bolts

We recommend the use of hand tools instead of power tools.

4 - small

bolts

16 - spring

washers

4 - large

screws

16 - flat

washers

allen wrench (included)

2 - top panels 2 - horizontal

wine racks

2 - pulls

1 - left

frame

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

6 - small

screws

1 - hinged

panel

1 - bottom

back panel

1 - middle panel 1 - top

back panel

5 - vertical

wine racks

PARKER SPIRITS CABINET

Made in China - r05 Page 2 of 4Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

2 With the assistance of another adult, fit pre-assembled

dowels of right frame into corresponding holes of bottom

frame as shown. Secure right frame with 2 large bolts,

2 spring washers and 2 flat washers.

Repeat step 2 for left frame.

A

1 Attach 4 legs to bottom frame with 2 large bolts, 2

spring washers and 2 flat washers per leg. Secure, but

do not over tighten, bolts with an allen wrench.

3 A) Insert bottom back panel into corresponding

grooves of left/right frames as shown.

B) Place middle panel onto pre-assembled shelf pins

as shown. Make sure shelf is securely supported by

each shelf pin.

NOTE: During assembly,

make sure grooves of left

and right frames are facing

each other as shown.

B

4 Fit top back panel into corresponding grooves of

assemblyas shown.

NOTE: Do not over

tighten the bolts

PARKER SPIRITS CABINET

Made in China - r05 Page 3 of 4Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

7 Attach 2 top panels to assembly with 2 small bolts,

2 spring washers and 2 flat washers per panel as shown.

Do not fully tighten the bolts. Make sure top panels are

orientated as shown. If the top panels are not aligned,

make sure assembly is level and adjust levelers as

necessary. At this point, secure but do not over tighten

the bolts.

5 Place hinged panel onto pre-assembled shelf pins

as shown, and secure with 4 large screws.

8 Fit slots of 5 vertical wine racks into corresponding

slots of 2 horizontal wine racks as shown.

6 A) Open hinged panel as shown, and secure pre-

assembled arm hinge with 2 small screws.

B) Attached 1 pull to hinged panel with 2 small screws.

A

B

NOTE: Make sure

top panels are

aligned. Adjust

levelers as

necessary.

levelers

PARKER SPIRITS CABINET

Made in China - r05 Page 4 of 4Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

11 Fit drawer glides of drawer into corresponding glides

of assembly. Make sure drawer assembly is securely

supported by glides.

Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not

use abrasive cleaners. Do not use furniture wax or

polish as the wood is finished with a protective clear

lacquer. It is recommended to use coasters to protect

against heat and water.

9 Insert wine rack assembly into cabinet assembly

as shown.

10 Attach 1 pull to drawer assembly with 2 small screws

as shown.