Crate Barrel 760 Parker Spirits Cabinet
2014-07-05
: Crate-Barrel 760-Parker-Spirits-Cabinet 760-parker-spirits-cabinet crate-barrel pdf
Open the PDF directly: View PDF .
Page Count: 4
Download | ![]() |
Open PDF In Browser | View PDF |
PARKER SPIRITS CABINET HARDWARE 12 - large bolts 16 - spring washers 16 - flat washers 4 - large screws 6 - small screws 4 - small bolts Thank you for purchasing the Parker Spirits Cabinet. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED phillips head screwdriver allen wrench (included) We recommend the use of hand tools instead of power tools. COMPONENTS 4 - legs 1 - bottom back panel 2 - top panels Made in China - r05 1 - bottom frame 1 - left frame 1 - middle panel 1 - drawer assembly 1 - right frame 1 - top back panel 5 - vertical wine racks 1 - hinged panel 2 - horizontal wine racks Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com 2 - pulls Page 1 of 4 PARKER SPIRITS CABINET NOTE: Do not over tighten the bolts NOTE: During assembly, make sure grooves of left and right frames are facing each other as shown. 1 Attach 4 legs to bottom frame with 2 large bolts, 2 spring washers and 2 flat washers per leg. Secure, but do not over tighten, bolts with an allen wrench. 2 With the assistance of another adult, fit pre-assembled dowels of right frame into corresponding holes of bottom frame as shown. Secure right frame with 2 large bolts, 2 spring washers and 2 flat washers. Repeat step 2 for left frame. B A 3 A) Insert bottom back panel into corresponding grooves of left/right frames as shown. B) Place middle panel onto pre-assembled shelf pins as shown. Make sure shelf is securely supported by each shelf pin. Made in China - r05 4 Fit top back panel into corresponding grooves of assemblyas shown. Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com Page 2 of 4 PARKER SPIRITS CABINET A B 5 Place hinged panel onto pre-assembled shelf pins as shown, and secure with 4 large screws. 6 A) Open hinged panel as shown, and secure preassembled arm hinge with 2 small screws. B) Attached 1 pull to hinged panel with 2 small screws. NOTE: Make sure top panels are aligned. Adjust levelers as necessary. levelers 7 Attach 2 top panels to assembly with 2 small bolts, 2 spring washers and 2 flat washers per panel as shown. Do not fully tighten the bolts. Make sure top panels are orientated as shown. If the top panels are not aligned, make sure assembly is level and adjust levelers as necessary. At this point, secure but do not over tighten the bolts. Made in China - r05 8 Fit slots of 5 vertical wine racks into corresponding slots of 2 horizontal wine racks as shown. Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com Page 3 of 4 PARKER SPIRITS CABINET 9 Insert wine rack assembly into cabinet assembly as shown. 10 Attach 1 pull to drawer assembly with 2 small screws as shown. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. It is recommended to use coasters to protect against heat and water. 11 Fit drawer glides of drawer into corresponding glides of assembly. Make sure drawer assembly is securely supported by glides. Assembly is now complete. Made in China - r05 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com Page 4 of 4