Crave C20W01 Wireless Speaker User Manual

Crave LLC Wireless Speaker

User Manual

USER GUIDE
2TABLE OF CONTENTS03Package Contents06Overview09Powering04Connectivity07Audio Control10Phone Calls05Specifications08Troubleshooting12Safety
3Crave Curve SpeakerMicro USB Charging CableUser GuidePACKAGE C NTENTS
4 VERVIEWPress and hold to turn the speakeron or o. Press this buon to Play/Pauseaudio.Press and hold the + or - buon toincrease or decrease volume.Tap (without holding) the + or - buon to switch between audio tracks.
5Power the speaker on/o by holding the power buon.P WERINGCharge the Crave Curve speaker with the provided USBcable and your USB charger (not included) before rstme use.
6Connecon via the 3.5mm stereo cable (non Bluetooth opon) - Connect your device to the 3.5mm port using a stereo audio cable. - Play audio from any device ulizing the 3.5mm output port.CONNECT VITYConnecon via Bluetooth - Hold for several seconds to Power On. - Listen for Power On tone, followed by Bluetooth pairing signal. - Enable Bluetooth funcon on your device. - Speaker will remain in pairing mode unl located on the device list. - Select “CRAVE Curve” speaker from the device list. Once paired, you will hear Bluetooth connected tone.
7Connecon via the 3.5mm stereo cable (non Bluetooth opon) - Connect your device to the 3.5mm port using a stereo audio cable. - Play audio from any device ulizing the 3.5mm output port.Connecon via Bluetooth - Hold for several seconds to Power On. - Listen for Power On tone, followed by Bluetooth pairing signal. - Enable Bluetooth funcon on your device. - Speaker will remain in pairing mode unl located on the device list. - Select “CRAVE Curve” speaker from the device list. Once paired, you will hear Bluetooth connected tone.For best sound quality:Place the speaker base on a hard surface.Face the speaker in direcon of user.Keep the device within speaker range.AUDIO CONTR L010203
8Using built-in speakerphone and microphoneAccept/end a phone call by pressing the Play/Pause buon or from your phone directly.PHONE ALLS
9SPECIFICATIONSBaery size:2000 mAhBluetooth Range:66 .(20m)USB Charge Voltage:DC 5V, 1.5ASpeaker Power:10W x2Frequency:90Hz – 20kHzSize:7.87x2.36x2.36 in
10Speaker is disconnecng from phone/tablet1 | Move your device closer to the speaker.2 | Power cycle the speaker o/on and reconnect.3 | Remove any visible obstrucon between the speaker and your device.4 | Check for signal interference from other devices in proximity to the speaker.Sound Quality1 | Check if your phone/tablet/device is in close proximity to the speaker.2 | Remove any visible obstrucons between the speaker and your device.3 | Reduce volume on the device.TROUBLESH TING
11Speaker is disconnecng from phone/tablet1 | Move your device closer to the speaker.2 | Power cycle the speaker o/on and reconnect.3 | Remove any visible obstrucon between the speaker and your device.4 | Check for signal interference from other devices in proximity to the speaker.Sound Quality1 | Check if your phone/tablet/device is in close proximity to the speaker.2 | Remove any visible obstrucons between the speaker and your device.3 | Reduce volume on the device.Unable to pair the speaker with your phone/tablet1 | Check if Bluetooth funcon is enabled on your device.2 | Check the speaker for low baery (plug into power source).3 | Check if the speaker is possibly paired to another device.4 | One Bluetooth enabled device should be available for pairing at any given me, mulple enabled devices can cause the speaker to pair to another device without you knowing.TROUBLESH TINGVolume too low/volume too high1 | Turn volume up or down on the speaker or your device.2 | Check if the 3.5mm cable is well connected (non Bluetooth opon).
12Fire Safety1 | Do not aempt to repair or take the speaker apart.2 | Do not leave the speaker in direct sunlight and/or extreme temperatures.3 | Do not charge the speaker in wet or damp areas.4 | Do not leave the speaker near an open re or hot surfaces.Read safety precauons carefully to ensure your personalsafety and to prevent property damageDrop/Fall1 | Do not leave unaended on any surface, vibraon of the speaker may cause movement.S FETYA
13Read safety precauons carefully to ensure your personalsafety and to prevent property damageDrop/Fall1 | Do not leave unaended on any surface, vibraon of the speaker may cause movement.Electrical Safety1 | Do not expose or use the speaker in rain, moisture, humidity or near water.2 | Do not disassemble, break open, crush, bend, puncture, shred, microwave, paint or insert foreign objects into the speaker.3 | Clean using a dry cloth only.Disposal1 | Never dispose of the speaker through burning.2 | Dispose of the speaker in accordance with local baery disposal regulaons.S FETYA
14FCC INFORMATIONFCC Radiaon Exposure StatementThis equipment complies with FCC RF radiaon exposure limits set forth for an uncontrolled environment.This device complies with Part 15 of the FCC Rules,operaon is subject to the following two condions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operaon.Warning: Changes or modicaons to this unit not expresslyapproved by the party responsible for compliance could voidthe user’s authority to operate the equipment.NOTE: This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to Part 15of the FCC Rules.FCC ID: 2AN7XC20W01
15FCC INFORMATION( connued on the following page )These limits are designed to provide reasonable proteconagainst harmful interference in a residential installation.This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instrucons, may cause harmfulinterference to radio communicaons.However, there is no guarantee that interference willnot occur in a parcular installaon. If this equipment doescause harmful interference to radio or television recepon,which can be determined by turning the equipment o andon, the user is encouraged to try to correct the interferenceby one or more of the following measures:
16FCC INFORMATIONReorient or relocate the receiving antenna.• Increase the separaon between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.
18@crave.direct @cravedirectcravedirect.comQuesons or comments? Please contact us at support@cravedirect.comDesigned by Crave in USA. Made in China.

Navigation menu