Crave CM5W01 Wireless Speaker User Manual

Crave LLC Wireless Speaker

User Manual

USER GUIDE
203Package Contents06 09Connectivity SpecificationsOverview04 07Audio Control10TroubleshootingPowering Phone Calls05 08 12SafetyTABLE OF CONTENTS
3Crave Curve Mini SpeakerMicro USBCharging CableUser GuidePACKAGE C NTENTS
4 VERVIEWPress and hold to turn the speaker on or o.Press and hold the + or - buonto increase or decrease volume.Tap (without holding) the + or -buon to switch between audio tracks.Charge the Crave Curve Mini speaker with the providedUSB cable and your USB charger (not included) beforerst me use.
5Press and hold the + or - buonto increase or decrease volume.Tap (without holding) the + or -buon to switch between audio tracks.Charge the Crave Curve Mini speaker with the providedUSB cable and your USB charger (not included) beforerst me use.Power the speaker on/o by holding the power buon.P WERING
6Connecon via the 3.5mm stereo cable (non Bluetooth opon) - Connect your device to the 3.5mm port using a stereo audio cable. - Play audio from any device ulizing the 3.5mm output port.CONNECT VITYConnecon via Bluetooth - Hold for several seconds to Power On. - Listen for Power On tone, followed by Bluetooth pairing signal. - Enable Bluetooth funcon on your device. - Speaker will remain in pairing mode unl located on the device list. - Select “CRAVE Curve Mini” speaker from the device list. Once paired, you will hear Bluetooth connected tone.
7Connecon via the 3.5mm stereo cable (non Bluetooth opon) - Connect your device to the 3.5mm port using a stereo audio cable. - Play audio from any device ulizing the 3.5mm output port.Connecon via Bluetooth - Hold for several seconds to Power On. - Listen for Power On tone, followed by Bluetooth pairing signal. - Enable Bluetooth funcon on your device. - Speaker will remain in pairing mode unl located on the device list. - Select “CRAVE Curve Mini” speaker from the device list. Once paired, you will hear Bluetooth connected tone.For best sound quality:Place the speaker baseon a hard surface.Face the speaker indirecon of user.Keep the devicewithin speaker range.AUDIO CONTR L010203
8PHONE ALLSUsing built-in speakerphone and microphoneAccept/end a phone call fromyour phone directly.USB Charge voltage:DC 5V, 0.5APower Output:5W
9Accept/end a phone call fromyour phone directly.SPECIFICATIONSBaery size:500 mAhBluetooth range:USB Charge voltage:DC 5V, 0.5APower Output:5WFrequency:90Hz – 20kHzSize:3.07x2.36x2.31 in66 .
10Speaker is disconnecng from phone/tablet1 | Move your device closer to the speaker.2 | Power cycle the speaker o/on and reconnect.3 | Remove any visible obstrucon between the speaker and your device.4 | Check for signal interference from other devices in proximity to the speaker.Sound Quality1 | Check if your phone/tablet/device is in close proximity to the speaker.2 | Remove any visible obstrucons between the speaker and your device.3 | Reduce volume on the device.TROUBLESH TING
11Speaker is disconnecng from phone/tablet1 | Move your device closer to the speaker.2 | Power cycle the speaker o/on and reconnect.3 | Remove any visible obstrucon between the speaker and your device.4 | Check for signal interference from other devices in proximity to the speaker.Sound Quality1 | Check if your phone/tablet/device is in close proximity to the speaker.2 | Remove any visible obstrucons between the speaker and your device.3 | Reduce volume on the device.Unable to pair the speaker with your phone/tablet1 | Check if Bluetooth funcon is enabled on your device.2 | Check the speaker for low baery (plug into power source).3 | Check if the speaker is possibly paired to another device.4 | One Bluetooth enabled device should be available for pairing at any given me, mulple enabled devices can cause the speaker to pair to another device without you knowing.Volume too low/volume too high1 | Turn volume up or down on the speaker or your device.2 | Check if the 3.5mm cable is well connected (non Bluetooth opon).TROUBLESH TING
12Fire Safety1 | Do not aempt to repair or take the speaker apart.2 | Do not leave the speaker in direct sunlight and/or extreme temperatures.3 | Do not charge the speaker in wet or damp areas.4 | Do not leave the speaker near an open re or hot surfaces.Read safety precauons carefully to ensure your personalsafety and to prevent property damageDrop/Fall1 | Do not leave unaended on any surface, vibraon of the speaker may cause movement.S FETYA
13Electrical Safety1 | Do not expose or use the speaker in rain, moisture, humidity or near water.2 | Do not disassemble, break open, crush, bend, puncture, shred, microwave, paint or insert foreign objects into the speaker.3 | Clean using a dry cloth only.Disposal1 | Never dispose of the speaker through burning.2 | Dispose of the speaker in accordance with local baery disposal regulaons.Read safety precauons carefully to ensure your personalsafety and to prevent property damageS FETYA
14FCC INFORMATIONFCC Radiaon Exposure Statement FCC ID: 2AN7XCM5W01This equipment complies with FCC RF radiaon exposure limits set forth for an uncontrolled environment.This device complies with Part 15 of the FCC Rules, operaonis subject to the following two condions: (1) This device maynot cause harmful interference, and (2) this device must acceptany interference received, including interference that maycause undesired operaon.Warning: Changes or modicaons to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
15This equipment complies with FCC RF radiaon exposure limits set forth for an uncontrolled environment.FCC INFORMATION( connued on the following page )These limits are designed to provide reasonable proteconagainst harmful interference in a residential installation.This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordancewith the instrucons, may cause harmful interference to radiocommunicaons.However, there is no guarantee that interference will notoccur in a parcular installaon. If this equipment does causeharmful interference to radio or television recepon, whichcan be determined by turning the equipment o and on, the user is encouraged to try to correct the interferenceby one ormore of the following measures:
16FCC INFORMATIONReorient or relocate the receiving antenna.• Increase the separaon between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.
18@crave.direct @cravedirectcravedirect.comQuesons or comments? Please contact us at support@cravedirect.comDesigned by Crave in USA.Made in China.

Navigation menu