Creative Game Accessories RBS RUGGED BLUETOOTH SPEAKER User Manual PACKAGE CONTENTS

Download:
Mirror Download [FCC.gov]
Document ID	2376820
Application ID	BrR5wfEnMEsZ6HEDS+21dw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.43kB (80433 bits)
Date Submitted	2014-09-03 00:00:00
Date Available	2014-09-03 00:00:00
Creation Date	2014-08-25 11:39:11
Producing Software	Adobe Acrobat Pro 9.1.2
Document Lastmod	2014-08-25 11:39:11
Document Title	PACKAGE CONTENTS
Document Creator	Adobe Acrobat Pro 9.1.2
Document Author:	微软用户

PACKAGE CONTENTS
 Rugged speaker system
 AC adapter
 User’s Guide
CHARGING THE SPEAKER
Charge speaker with the included AC adapter. Plug the adapter into any wall socket or power
strips. The adapter’s dc end can plug into the “DC IN” port on the side of the speaker to charge
the speaker. When charging, a red led will illuminate, it will turn off when the speaker is fully
charged. This adapter is made specifically for this speaker, please do not use for other acessories
or products.
PLAYING MUSIC VIA BLUETOOTH MODE
1. Make sure the speaker is fully charged.
2. Turn the speaker on by the switch on the side of the speaker. A blue led will illuminate and
begin to flash.
3. Follow the instructions for pairing that came with your Bluetooth enabled device. You may
have to go into your settings and turn Bluetooth ON. Make sure your device is discoverable
or in search mode.
4. Your device should discover “PBT6005” or ”SBT605”. Select this profile. Once
connected, the blue led will blink slowly.
5. You are now connected and play your audio content wirelessly
6. You may chose to play the next song, replay the same song, pause or play music by the
buttons located on the side of the speaker
PLAYING MUSIC VIA AUX IN MODE
1. Make sure the speaker is charged
2. Turn the speaker on by switching the power button at the side to on. A blue LED will appear
when on.
3. Connect one end of a 3.5 mm audio cable to the “AUX IN” port on the side of the unit.
Connect the other end to the 3.5mm headphone jack of your audio device.
Note: Connecting the audio cable will override Bluetooth mode. speaker will automatically
switch to auxillary when the audio cable is connected.
4. Make sure the volume of your audio device and the volume of speaker are both set to
medium/low.
VOLUME CONTROL & CONTROL BUTTON
Adjust the volume by the switches on the side of the speaker
The side panel also includes the buttons for play, pause, next song & last song. Press the button
according to activate the functions.
CHARGING PRODUCT
To charge any product, please use the USB port on the side of the speaker . The rugged speaker
will charge any smart phone or pad product that uses up to 1 a output. Speaker contains 4000
mah rechargeable Li-Ion batterie. In average speaker will fully charge any smart phone product
1 time.
Charging a product while the music is playing will drain the battery in a much faster rate.
TROUBLE SHOOTING
Problem: Bluetooth not connecting.
Solution: Please consult the User Guide of your Bluetooth enabled audio device for
instructions. Make sure that both of your audio device and power rock speaker are
discoverable and charged. Try rebooting the speaker by turning it off then back on.
Make sure someone else is not already connected to the speaker.
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generate, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:




Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
The equipment must not be co-located or operating in conjunction with any other
antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : 微软用户
Create Date                     : 2014:08:25 11:39:11+08:00
Modify Date                     : 2014:08:25 11:39:11+08:00
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2014:08:25 11:39:11+08:00
Creator Tool                    : Adobe Acrobat Pro 9.1.2
Format                          : application/pdf
Title                           : PACKAGE CONTENTS
Creator                         : 微软用户
Document ID                     : uuid:6f272f1b-2803-40f3-a455-b6361896e134
Instance ID                     : uuid:6203f7b9-7710-4afa-a6a3-a47e8ca98b8b
Producer                        : Adobe Acrobat Pro 9.1.2
Page Count                      : 3

EXIF Metadata provided by EXIF.tools