Creative Labs MF8170 Creative Sound Blaster ROAR SR20 User Manual 03MF817000000A Front3test 050214 ai

Creative Labs Inc Creative Sound Blaster ROAR SR20 03MF817000000A Front3test 050214 ai

MF8170_user manual (Front)

12LS12LS1. NFC Receptor2. Battery Indicator3. Record Indicator4. Power / Bluetooth® Status Indicator5. Multifunction Button - For Bluetooth pairing / connecting - Answering calls6. Volume Up / Down Button - Volume levels: 0 to 20 - Volume returns to default level 10 every time you switch off the speaker.7. Button - Increases overall loudness and spaciousness for maximum audio output8. Power ON / Standby Button9. MicrophoneRearTopPN: 03MF817000000 Rev A2 3 5 6 7 8110. DC Input11. Aux-In12. DC Out (USB 1.0A)13. Micro USB Connector14. MicroSD Slot15. Mic On / Mute Switch16. Record Button17. (Record) Play / Pause Button18. Shuffle / Repeat All Switch19. Previous Button20. Next Button21. (MP3 Playback) Play / Pause Button22. OFF / (1) Life-Saver Mode 1 / (2) Life-Saver Mode 2 Switch 23. Alarm Button24. (Alarm) Arm / Off Switch15 17 18 20242216 19 21 2311 12 13 141012LSOverviewNOTE:Power saving mode: The speaker automatically powers down when there is no Bluetooth connection, recording using microSD card, microSD card playback or audio input for more than 15 minutes.For optimized charging: Creative recommends using the bundled USB cable for optimized charging.TIP:Lithium-ion battery life may suffer when it is constantly fully depleted or overexerted at low voltage. It is a good practice to keep the battery well charged.Option 2: USBBattery status indicationsBattery at about 70%Battery lowBattery fullBattery extremely lowBattery chargingRunning LEDSlow BlinkOption 1: Power AdapterCharge the speaker with the supplied power adapter for at least 3 hours before use. Please ensure your speaker is powered off for optimized charging.*Battery performance may degrade over time depending on charge cycles.3 HoursThe Sound Blaster ROAR can also be charged using a USB cable. It may take longer to charge due to USB power limitation. Switch off your speaker when charging. PC/MacMainsCharge it111* Not included, USB adapter with DC 5V and up to 1A output rating can be used.Assembling the Power AdapterRemoving Adapter Plug HeadUS, Japan & Taiwan Europe- Supplied interchangeable plugs may vary according to region and country.One-touch NFC pairing 1. Press the Power ON / Standby button to power ON the speaker.2. Press and hold the Multifunction button until the white LED is blinking rapidly.3. Select SB ROAR SR20 from the list of discovered Bluetooth devices, and they’re paired!Turn on NFC on your NFC-enabled device and tap your device on the NFC logo to connect.To disconnect, tap your device on the Sound Blaster Roar again.LED Indication StatusGreen LED stays litWhite LED blinking rapidlyWhite LED stays litPowered ON but not connected to any Bluetooth devicesBluetooth Pairing Mode, waiting for device to connectConnected to a Bluetooth deviceConnect it22Manual Bluetooth pairing USB connection*OR ORNOTE:Be sure that your phone is NFC-enabled and find out where the NFC sensor is located on your phone. For more information, refer to the User Guide of your phone.TIP:With Multipoint, you can connect up to two smart devices wih your speaker simultaneously. Simply pause the playback on your current device and tap another device to connect!* The speaker automatically goes into MicroSD Card Reader Mode every time it is connected to a computer. To use it for audio playback, see “Playing audio from computer (USB audio)”.Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission of Creative Technology Ltd.Copyright © 2014 Creative Technology Ltd. All rights reserved. Creative, the Creative logo, Sound Blaster, the Sound Blaster logo, Sound Blaster Roar, SBX Pro Studio and the SBX Pro Studio logo are trademarks or registered trademarks of Creative Technology Ltd. in the United States and/or other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd is under license. Other trademarks and trade names are those of their respective owners. aptX is a trademark of CSR Plc. All specifications are subject to change without prior notice. Use of this product is subject to a limited hardware warranty. Actual contents may differ slightly from those pictured. The software included in this packaging may not be used separately from the hardware. Before using the software, you must agree to be bound by the terms and conditions of the end user license agreement.9Model No.: MF8170 Sound Blaster ROAR SR20 Quick Start12LSDiscover more ways to experience your Sound Blaster Roar! 4creative.comwww.soundblaster.com/guide/ExperienceRoar/

Navigation menu