Creative Labs MF8235 Creative X-Fi Sonic Carrier Subwoofer User Manual

Creative Labs Inc Creative X-Fi Sonic Carrier Subwoofer

UserManual.wiki >

Creative Labs >

MF8235 User Manual >

Contents

1. User Manual
2. Users Manual

User Manual

THE AUDIO OF TOMORROWCreative X-Fi Sonic Carrier (Model MF8235)For the latest information, visit: www.creative.com/support/soniccarrierUSER’S MANUAL

Package Contents- Main unit- Subwoofer - Insert Batteries to your Remote Control (AAA Battery X 2)Wall Mount Your Sonic Carrier Discover the core elements that make Sound BlasterX H5 Tournament Edition the gaming headset for professional gamers.Setting Up the Wireless Subwoofer ConnectionConnecting Electrical PowerConnect Your Sonic CarrierOverview- Main unit- Subwoofer - Remote ControlProduct Speciﬁcationpage 4page 6page 9page 8page 10page 14page 18Contents

Package ContentsMain Unit• Warranty/TechSupportbooklet• Safetyandregulatoryleaets• UserManualAccessories boxx8IR remote control AAABatteryx2forIRremote controlWall mount brackets + thumbscrewDriver décor rings x 8Power cable IRTransmitter HDMI Cable

4Insert Batteries to your Remote Control (AAA Battery X 2)1. Slide the battery cover in the direction of the arrow until it is completely removed.2. Insert 2 AAA batteries (1.5V) in the correct +/- polarity. 3. Slide the battery cover back into position.xxxxxxxx1. xxxxxxxxxxSetup App

5Setup RecommendationThe Sonic Carrier main unit is designed to be placed on top of a console or wall mounted. For optimum performance, please observe the setup recommendation below.1. In order to reproduce an immersive sound experience, the Sonic Carrier main unit radiates sound from the front, top and sides. Ensuring that these sound waves are not obstructed by objects placed in their path would yield the best sound experience. Do not place your Sonic Carrier within an enclosed ﬁxture (Cabinet, Shelving unit, etc.), and make sure nothing is obstructing the sides. The top ﬁring speakers needs to have a clear line of sight to the ceiling as well.2. Locate the Sonic Carrier at least 10cm away from the bottom of your TV, to avoid obstructing the top ﬁring speakers3. For the best listening experience, the listening position should be at least 3ft away from the Sonic Carrier 4. The subwoofer unit produces non-directional sound and thus could be placed at your convenience around the room. For optimum results, it would be best to locate the subwoofer equidistant to the main unit when measured from the listening position, and to keep the subwoofer within 3M of the main unit. 5. The subwoofer is equipped with a pair of ports that augments the sound output of the dual subwoofer drivers at the lowest frequencies. A distance of 10cm between the rear of the subwoofer enclosure and the adjacent wall has to be maintained in order to avoid turbulence or air chufﬁng noises. 6. Room acoustics has a major inﬂuence on sound quality. The ear is particularly troubled by standing waves and echoes which can be identiﬁed by moving around your room and loudly clapping your hands. Parallel surfaces such as opposite walls, ﬂoor and ceiling encourage and sustain these problems. However, rearranging curtains, thick carpets, rugs, furniture and bookcases can make a dramatic improvement as the sound waves are partially absorbed and diffused. As far as possible, the Sonic Carrier main unit should also be setup such as to maintain symmetry in the room, with equal distance from the main unit to the left and right wall. Care for your Sonic CarrierCabinetYour Sonic Carrier is ﬁnely crafted to last a lifetime from select metal alloys, engineering polymers; and should be treated as you would furniture with similar materials and ﬁnishes. Dust lightly with a soft lint-free cloth, avoiding abrasives and spirit based cleaners. If necessary, wipe carefully with a cloth slightly dampened with glass cleaner to remove stubborn soil and marks.GrillesThe acoustically transparent fabric midrange driver grilles help protect the driver uits, and could be left in place during listening with negligible acoustic effect. These could be taken off and cleaned using a lint brush. Should you choose to clean the grilles in place, be careful not to press in and deform the drivers under the grille. DriversAvoid touching the speaker diaphragms, particularly tweeters. The surface of the midrange driver could be dusted very carefully with a soft dry brush. General care informationAvoid damp, direct sunlight and temperature extremes. The ventilation and ports should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. No naked ﬂame sources, such as lighted candles, should be placed on the apparatusCare and Setup Information

6Preparation Materials* Screw and wall plugs are not supplied for mounting the unit. We recommended the Hilti (HUD-16 x 30) for the mounting. Wall Mounting The Main UnitAConcrete Wall Hollow&DrywallM5 Screw x8Lock Washer x8Plain Washer x8Screw Driver Hammer HandDrillCavityAnchorx8Lock Washer x8Plain Washer x8Screw Driver Hammer HandDrillCavityAnchorApplication25 cm89 CMTVWall mount bracketsWarning! Improper installation could lead to damage of the wall and to equipment, and might lead to injury. The following information does not constitute a complete set of wall mounting instruction, and are provided for use by qualiﬁed installers only.

7Concrete Wall Anchor PlugConcrete WallWall mount bracketsLock WasherPlain Washer CavityAnchorWall mount bracketsLock WasherPlain Washer Hollow&DrywallRecommended bolt mounting positionsBCDetermine the mounting position of the Sonic Carrier main unit, ensuring that the position is properly centered relative to the TV and leveled horizontally. Note the recommended bolt locations, mark out and drill accordingly. Please ensure that the wall is able to bear the weight of the sonic carrier with adequate safety margins before proceeding. Please also note the location of buried pipes, conduits or cabling within the wall before drilling.Place and center the sonic carrier main unit on the wall mount brackets and attach the thumbscrews.Wall Mounting The Main Unit

8Connect the power cords to the main unit and subwoofers, socket location are located at the back of the units and are marked below. Connect power cords to the mains socket.For more information about the power supply and power consumption, refere to the label attached to the product. (Main Unit : Bottom panel, Subwoofer : Rear panel)Main UnitSubwooferConnecting Electrical Power

91. Ensure the Main unit and Subwoofer are placed within 3 metre for the setup process.2. Ensure mains power is connected and switched on.3. Power on the Main unit by pressing the power ( ) button. The boot up process may take around a minute.4. Connect the link cable (bundled with the subwoofer) between the main unit and the subwoofer. On the Main unit, the cable should be plugged into the Sub-Out connector. On the Subwoofer, the other end of the cable should be plugged into the In connector.Setting Up the Wireless Subwoofer Connection5. Press and hold the “ ” button until the main display shows a “Waiting for subwoofer connection” message is shown. Upon successful setup, a message indicating “Subwoofer Connected” would be displayed.

10Connecting Sonic Carrier to your TV1. Connect the HDMI cable as shown in the illustration below2. When TV sound is present, it is output automatically. On Certain TV sets, it might be necessary to press and hold the “HDMI” button on the remote control to enable TV sound output from the Sonic Carrier.3. If you are placing the Sonic Carrier on a console, and it is blocking the IR remote control sensor of the TV, please in-stall the bundled IR transmitter as shown. The transmitter should face the IR remote control sensor of the TV set. Please note that the IR transmitter requires the Sonic Carrier to be powered On or on Standby mode to work. Do not discon-nect the Sonic Carrier from mains power.Connecting Your Sonic CarrierIR Transmitter for TV

11Connecting external devices The sonic carrier is equipped with a wide range of connectivity options. The following connection map illustrates the possibilities of connection, cable type needed, as well as the corresponding 1. HDMI Connection2. Optical Connection3. USB ConnectionFront and Rear USB ports could be used to connect to USB ﬂash drives or USB Hard disk drives.The USB port labeled “Power” does not support data transfer, but could be used to provide power (Maximum: 5V 2A) to devices such as TV sticks. ORConnecting Your Sonic CarrierWhen a Dolby encoded input signal is detected, it is automatically decoded and a status indication is displayed on the main display.

124 . Bluetooth ConnectionPress the “ ” button on the remote control, or the “ ” button on the main unit to switch to Bluetooth input.Hold the main unit’s “Bluetooth” button till the display indicates BT Pairing to pair with your Bluetooth device. Connecting Your Sonic CarrierX-Fi Sonic CarrierAA 3.5mm stereo input (Aux-In) is located on the front panel for easy access. 7. Analog Connections cBC6. SD Cards B1 SD and 3 Micro-SD card slots are located at the front of the main unit. Only the selected card would be readable by the Android video engine. SDMicroSDA pair of ¼” microphone inputs (Mic In 1, 2) is also located on the front panel, and supports most cardioid type dynamic microphones.A5. Microphone Connections

13Connecting to your WiFi networkVideo Tutorials1. Ensure the sonic carrier is turned on and connected to your TV2. Press “Home” to display the android video engine home screen3. Select (Gear icon) from the top right corner of the home screen using the cursor and OK keys of the remote control4. Select (Wi-Fi)5. select the desired Wi-Fi network to connect to, enter the password and click on “Connect”Hit the “Home” button on the remote control to access a series of video tutorials, with step-by-step instructions on how to best use the Sonic Carrier.Wi-Fi SetupWi-Fi audio and Video After the Wi-Fi network has been set up, select “WI-FI” to enjoy high quality audio over DLNA or to use Spotify Connect, or select “Home” to acccess the Android Video Engine. How to use Connect (...insert from the spotify connect marketing requirements)

14OverviewMain unit Top PanelButton ActionVolume Control - Volume DownPress-Hold to mute.Turn On/Off main powerPowerVolume Control + Volume UpPress and Hold to volume up quickly. X-Fi Turns on and off X-Fi SuperWide processingPrevious Previous track.Play/PauseA/DB/EC/FBluetoothWIFIHomeOutMicHDMISDUSBOPTL-InAuxLEDMic Control -Mic Control +NextToggles between play and pause.Custom buttons that can be assigned to web services. Short press to trigger A,Press and Hold to trigger D.Custom buttons that can be assigned to web services. Short press to trigger B,Press and Hold to trigger E.Custom buttons that can be assigned to web services. Short press to trigger C,Press and Hold to trigger F.Switch to Bluetooth modePress and Hold to go to Bluetooth PairingSwitch to Wiﬁ modeSwitch to Android OTT mode, and show home screen.Switch between available outputs like Speaker, Output or BT headphoneSwitch between available microphone adjustment mode, Mic Vol, Mic Key, Mic Reverb.Switch between available HDMI Inputs. LED 1-4 will be lighted to indicate input source.Switch between available SD Inputs. LED 1-4 will be lighted to indicate input source.Switch between available USB inputs.Switch between available Optical InputsSwitch to Line Input.Switch to Aux Input.Cycle LED patterns on Subwoofer. Press and Hold to enter subwoofer pairing mode.Decrease the vol, key or reverb for both the microphones, depending on the microphone adjustment mode. In volume mode, press and hold button to mute.Increase the vol, key or reverb for both the microphones, depending on the microphone adjustment mode.Next track.

15Front PanelConnector DescriptionMicrophone Input (1/4”)Auxilary Input (3.5mm 4-pole)SD Card SlotmicroSD Card SlotsUSB Host (external hard disk, ﬂash drive), Keyboard/mouse dongleUSB Power (5V 2A)HDMI 2.0a Input

16Rear PanelOverview HDMI 2.0a OutputsHDMI 2.0a InputsUSB Host (external HDD, ﬂash drive) , Keyboard/mouse dongleService Port. No user accessible features.Gigabit EthernetOptical InputsRCA InputRCA OutputSubwoofer OutIR TransmitterFuse Ratings T4AH 250V AC IN 100-240VConnector Description

17Button ActionTurn On/Off main powerCycles to the next LED preset on all the subwooferSwitch to Bluetooth InBass BoostSwitch between microphone adjustment modes - Mic Volume, Key and ReverbAdjusts levels for Mic Volume, Key or ReverbToggles On/Off mouse modeDisplay any info or menu for the Android Video EngineDisplay any info or menu for the Android Video EngineReserved for future useStop playbackCustom buttons reserved for future useToggle between shufﬂe and repeat playback modeNavigation and selection keys for the Android Video EngineNavigation and selection keys for the Android Video Engine/optionNavigation and selection keys for the Android Video EngineIncrease/decrease volumeMute/Unmute controlTurns on and off X-Fi SuperWide processingReserved for future useSwitch to WIFI audioSwitch to Aux InPress to switch to the last asscessed HDMI source, Press and hold to playback TV sound.Press to switch to the last asscessed SD card, or to cycle between available SD card.Press to switch to the last asscessed USB drive, or to cycle between available USB drives.Press to switch to the last asscessed Optical Input, or to cycle between available Optical Input.Select sound output from main unit, mute Line-Out and BT headphone outSelect sound output from Line-output, mutes main unit and Bt headphone outPrevious trackToggle between play and pauseNext trackSelect sound output from connected BT headphone, mutes main unit and Line-OutSwitch to Line InPowerLEDBTBass+MicKey/Reverb -/+MouseHomeInfoLikeStopQuickPlay A-FShufﬂeCursor & OKReturnExitVOL + /-MuteX-FiCH +/-WIFIAuxHDMISDUSBOPTSPKL-OutRewind/PreviousPlay / PauseForward / NextBt-HPL-In3412786510912345678910111213141516171819202122232425262728293031323311121516141317918 192021 212324262533272830293231Remote Control

18DIMENSIONS AND WEIGHTMAIN UNIT Product name : CREATIVE X-FI SONIC CARRIER Model Number : MF8235 Input rating : 100-240V 50/60Hz 120W Operating temperature range : 0°C to 45°C Dimensions (L x W x H) : 1521 x 151 x 96mm (59.9” x 5.9” x 3.8”) Weight : 16kg (35.3 lbs)ELECTRONICANDACOUSTICSPECIFICATIONS • Amplifertype:ClassD • Systempower:1000WRMS,2000Wpeak • Mainunit:400WRMS,800Wpeak • Subwoofer:600WRMS,1200WpeakANDROIDVIDEOPLAYBACKENGINE • Quad-core64-bithighperformanceARMCortexA-53withNEONprocessor2GHz • MaliT720GPUwithOPENGLES3.1support • 2GBRAM,16GBbuilt-inashstorage • Supports4K60fpsvideoplayback • SupportsH.265/HEVCCodecWI-FI AUDIO • SupportsDLNA,TidalandSpotifyConnectDRIVERSANDACOUSTICS • SonicCarrierMainUnitDrivers - Five 1” coated aluminum alloy tweeters, capable of 40kHz high frequency reproduction  - Eight2.75”aluminum-magnesiumalloymidbassdriverswithindividuallysealedenclosures - Two 2.25” aluminum-magnesium alloy full-range drivers for surround channel reproduction with individually sealed enclosuresWIRELESSANDWIREDCONNECTIVITY •Bluetooth version: 4.1Bluetooth - Bluetooth version: 4.1 - Operating Frequency: 2402-2480MHz - RF Output Power: <4dBm - Bluetooth version: 4.0+EDR - Operating Frequency: 2402-2480MHz - RF Output Power: <4dBm Wi-Fi 2.4GHz - 802.11b/g/n - Operating Frequency: 2412-2462MHz - RF Output Power: <20dBmWi-Fi 5GHz - 802.11a/n/ac - Operating Frequency: 5180-5825MHz - RF Output Power: <18dBm Wireless audio link - Operating Frequency: 2412 – 2464MHz - RF Output Power: <17dBm • OperatingFrequency:2402-2480MHz • Bluetoothcodec:aptX®, aptX Low Latency, AAC, SBC • Bluetoothprolesandfeatures:A2DPreceiverforaudioplaybackonSonicCarrier,A2DPtransmissionforaudioplaybackonBluetoothheadphones, AVRCP (Bluetooth remote control) • Bluetoothoperatingrange:Upto10M,measuedinopenspace • BluetoothRFOutputPower:<4dBm • Wi-Fi:802.11a/b/g/n/ac2.4GHz&5GHz • Speaker-Speakerwirelesslink:2.4Ghz.Supportsupto4wirelesssubwoofers • Speaker-Speakerwirelesslinkoperatingrange:Upto10M,measuredinopenspace. • Linelevelinput:Stereo2VrmsanalogRCAconnectors • Linelevelouput:Stereo2VrmsanalogRCAconnectors • Auxiliaryinput:Stereo1Vrmsanalog3.5mmconnector • Microphoneinputs:2x¼”microphoneconnectorsupportingmostdynamicmicrophones • USBhost:2xUSB2.0typeAconnectorforUSBashdrivesandHDDs • USBpower:USBtypeAconnectorforprovidingpowertoperipheraldevices(Rated5V2A) • SDcardslots:1xSDcardslot,3xMicroSDcardslots • HDMIinputs:4xHDMI2.0awithHDCP2.2 • HDMIoutput:1xHDMI2.0awithHDCP2.2andARC • Opticalinputs:2xToslinksupportingupto24Bit/96Khz • Ethernet:1xGigabitEthernet • Decodersupport:DolbyAtmos,DolbyTrueHD,DolbyDigitalPlus™,DTS:Xupgradeableviarmwareupdate • Powersupply:Auto-switching100-240V,50-60HzACuniversalinputWireless performance is dependent on your device’s Bluetooth or WiFi wireless technology. Refer to your device manufacturer’s manual. Creative will not be liable for any lost of data or leakages resulting from the use of these devices. Walls and structures may also affect range of device.Product Registration Registering your product ensures you receive the most appropriate service and product support available. You can register your product during installation or at http://www.creative.com/register. Please note that your warranty rights are not dependent on registration.Speciﬁcations

19WarrantyCreative X-Fi Sonic Carrier- Limited Hardware WarrantyCreative Labs Pte Ltd and its aliates (“Creative”) warrants that the retail purchased Creative-branded hardware product herein (“Product”) is free of material defects in materials and workmanship (“Defect(s)”) that result in Product failure during normal consumer usage for the Warranty Period, according to the following terms and conditions:1. This limited hardware warranty extends only to the original end-user purchaser and holder of this warranty (“You” or “Your”) and is not transferable or assignable to any subsequent purchaser. 2. You must provide proof of original purchase of the Product by a dated itemized receipt to be eligible for this limited warranty.3. The limited warranty is ONLY applicable in the country or territory where the Product was purchased from an authorized retailer/reseller and excludes any product that has not been purchased as new or is obtained as a result of the purchase of a non-Creative product.4. If a Defect arises and a valid claim is received during the Warranty Period (as provided below), Creative will at its sole option, service the Product at no charge using new or refurbished replacement parts at our sole discretion. Please note that: a. The limited warranty for the Product is for twenty-four (24) months (excluding all wear and tear), subject to certain exceptions as stated in the EU Directive 1999/44/ EC**) from the date of delivery (“Warranty Period”). The Warranty Period will be extended by each whole day that the Product is out of Your possession for repair under this warranty. b. Creative will cover the labor charges incurred by Creative in repairing or replacing the defective parts during the Warranty Period from the date of your purchase. c. You will not have to pay for any such replacement parts. d. Creative also warrants that the repaired or replaced parts will be free from defects in material and workmanship for the remainder of the Warranty Period. e. For the limited warranty of the Product’s Liquid Crystal Display, please refer to the Creative Support Web Page at www.creative.com/support.5. This warranty gives You speciﬁc legal rights. You may also have other rights, which vary from state to state and country to country. The terms of this warranty do not exclude such rights or limit them. Your statutory rights are unaected. Some states and countries do not allow (i) exclusions of, or limitations on, certain liabilities or warranties, including but not limited to how long a warranty lasts, the exclusion or limitation of incidental or consequential damages, or the exclusion of liability for injury (including death) caused by negligence, (ii) the inclusions of certain asymmetrical terms in warranties, or (iii) the expiration of all legal claims after a ﬁxed time, so certain of the above limitations, exclusions or asymmetrical terms may not apply to You depending on the relevant jurisdiction. If adjudged invalid, such term(s) would be severable without aecting the validity of the other terms.6. Creative does not warrant uninterrupted or error-free operation of the Product. Creative is not responsible for damage arising from failure to follow all or any instructions relating to the Product’s use. Creative is not under any obligation to support the Product for all operating environments, including but not limited to, interoperability with both current and future versions of software or hardware.7. For Products that are capable of storing data: Creative is not responsible or liable for any data stored on the Product that is lost, deleted or becomes otherwise inaccessible. All data may be deleted from the Product during servicing. You should remove or make a backup copy of any data stored on the Product before sending the Product to Creative.8. If a problem develops during the Warranty Period, please refer to www.creative.com/support or contact Your retailer/reseller. Please note that: (i) You must provide proof of original purchase of the Product by a dated itemized receipt; (ii) You shall bear the cost of shipping (or otherwise transporting) the Product to Creative. Creative will bear the cost of shipping (or otherwise transporting) the Product back to You after completing the warranty service; (iii) Before You send the Product to Creative, You must be issued a Return Merchandise Authorisation (“RMA”) number from www.creative.com/support. Clearly write the RMA number on the outside of the package containing the Product being sent to Creative. Creative will not accept a return that does not have a RMA number on the outer packaging; and (iv) You can only return the defective Product(s) not excluded under Section 9 below. Creative is not responsible for other products or accessories returned with the defective Product(s). Creative reserves the right to change the method by which Creative may provide warranty service to you, and your Product’s eligibility to receive a particular method of service. Service will be limited to the options available in the country where service is requested. Service options, parts availability and response times may vary according to country. For further details on Creative Warranty terms, Product returns and repair procedure, Creative customer support services and contact information, please refer to the support section of Creative’s web site at www.creative.com/support.9. The limited warranty does not apply to: a. Consumable parts, such as batteries or protective coatings that, due to their nature, tend to diminish over time, unless failure has occurred due to a defect in materials or workmanship; b. Damage caused by normal wear and tear, abnormal use or conditions, misuse, neglect, abuse, accident, improper handling or storage, defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, including without limitation, software changes, or modiﬁcation in any way by someone other than Creative or its authorised service centres, improper use of any electrical source, undue physical or electrical stress, operator error, non-compliance with instructions or other acts which are not the fault of Creative, including damage or loss during shipment or transit. c. Damage from external causes such as ﬂoods, storms, ﬁres, sand, dirt, earthquakes, an Act of God, exposure to sunlight, weather, moisture, heat, vibration or corrosive environments, electrical surges, battery leakage, theft, or damage caused by the connection to other products not recommended for interconnection. d. Damage or loss of data due to (i) interoperability with either or both current and future versions of operating systems or other current or future software and hardware, (ii) a computer virus, worm, spyware, Trojan horse or memory content corruption, or (iii) malfunction or defect of the Product. e. Counterfeit products/parts or any accompanying products/parts that are incompatible with the Product. f. Any Product that: (i) has had its serial number altered, defaced or removed; (ii) shows evidence of tampering; (iii) mismatched board serial numbers; or (iv) has non- conforming or non-Creative housing or casing. g. Any accessories including but not limited to disposable alkaline batteries, removable fuses, screen protectors, plugs and pouches. h. Any defect occurring after the expiration of the Warranty Period or where Creative was not advised in writing of an alleged defect or malfunction within seven (7) days after the expiration of the Warranty Period.10. Any Product determined by Creative to be warranty-expired, warranty-void or not in need of repair will be subject to a minimum non-refundable diagnostic and handling fee. In the event that You fail to make the payment, Creative may, at its sole discretion, dispose of the Product without notice and liability to You.11. Subject to any non-excludable limit under applicable law, the maximum liability under this limited warranty is the original price paid for the Product (excluding any shipping and additional charges). Creative and its aliated companies will not be liable for any other losses or damage unless liability is non-excludable under applicable law. The remedy stated is Your exclusive remedy for breach of warranty. Any action or lawsuit for breach of this limited warranty must be commenced within eighteen (18) months following the original purchase of the Product or within the limitation period under applicable law.12. INSOFAR AS PERMITTED BY LAW, THE PRODUCT AND THE SERVICED PRODUCT IS PROVIDED “AS IS”. TO THE EXTENT PERMITTED BY APPLICABLE LAW, CREATIVE AND ITS AFFILIATED COMPANIES HEREBY DISCLAIM THE APPLICABILITY OF ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE FOR THE PRODUCT AND/OR THE SERVICED PRODUCT. CREATIVE AND ITS AFFILIATED COMPANIES WILL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ANY LOST PROFITS, SAVINGS, DATA, OR LOSS OF USE, ANY THIRD PARTY CLAIMS, AND ANY INJURY TO PROPERTY OR BODILY INJURY (INCLUDING DEATH) TO ANY PERSON, ARISING FROM OR RELATING TO THE USE OF THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, TORT, OR STRICT LIABILITY, EVEN IF CREATIVE OR ANY OF ITS AFFILIATED COMPANIES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.13. For Australia only: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. (Creative Technology Ltd, 31 International Business Park, #03-01 Creative Resource, Singapore 609921. Telephone: +65 6895 4433 (standard international call charges apply.))14. This is the entire warranty and supersedes all prior and contemporaneous agreements or understandings, oral or written, relating to warranty coverage for the Product, and no representation, promise or condition not contained herein will modify these terms. 15. Update(s) of this Limited Hardware Warranty may be posted at www.creative.com/support. An Update will replace any earlier version upon posting on the web site. You are advised to check for Update(s).** A seller in the European Union (EU) may be entitled to refuse to repair or replace the goods if it is (i) impossible or (ii) disproportionate (eg. where the costs are unreasonably high for the seller) to do so, taking into account the value the goods would have had (if there were no lack of conformity), the signiﬁcance of the lack of conformity and where an alternative remedy would be completed without signiﬁcant inconvenience to the consumer. In such cases, the consumer may ask for an appropriate reduction of the price or have the contract rescinded. The consumer is not entitled to have the contract rescinded if the lack of conformity (or defect or fault) is minor. In which case, the seller is entitled to turn down a request for rescission of the contract in such a situation. For further details, please refer to Articles 3(3), 3(5) and 3(6) of the EU Directive 1999/44/EC.

Navigation menu