Creative Labs PMT-ZZ0030 Creative HanZpad User Manual 03ZZ003000001A Back outline 040512
Creative Labs Inc Creative HanZpad 03ZZ003000001A Back outline 040512
User Manual
www.android.com
TM
Regulatory Information
The following sections contain notices for various countries:
CAUTION: This product is intended for use with FCC/CE certied computer equipment.
Please check the equipment operating/installation manual and/or with the equipment
manufacturer to verify/conrm if your equipment is suitable prior to the installation or
use of the product.
Federal Communication Commission (FCC)
Interference Statement
FCC Part 15: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of
the FCC Rules, this device must be installed with computer equipment certied to
comply with Class B limits. All cables used to connect to the computer and peripherals
must be shielded and grounded. Operation with non-certied computers or non-
shielded cables may result in interference to radio or television reception.
MODIFICATION: Any changes or modications not expressly approved by the grantee
of this device could void the user's authority to operate the device.
Technical Specications
Device Operating Temperature range: 0°C to 45°C
Power Adapter Operating Temperature range: 0°C to 40°C
Wireless Operating Frequency: 2400 -2483.5 MHz
These specications apply to the hanZpad operating from the supplied 5V DC 2A
switching power supply.
China RoHS - Table of Disclosure
Singapore
Complies with
IDA Standards
DB00148
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without RF restriction.
WARNING: To prevent fire or shock hazard,
do not expose this appliance to rain or
moisture.
Safety Information
Refer to the following information to use your product safely, and to reduce the chance
of electric shock, short-circuiting, damage, re, hearing impairment or other hazards.
Improper handling may void the warranty for your product. For more information, read
the warranty available with your product.
• Do not dismantle or attempt to repair your product.
Refer all servicing to authorized repair agents.
• Do not expose your product to temperatures outside the range of 0°C to 45°C
(32°F to 113°F).
• Do not pierce, crush or set re to your product.
• Keep your product away from strong magnetic objects.
• Do not subject your product to excessive force or impact.
• Do not expose your product to water or moisture.
• If your product is moisture-resistant, take care not to immerse your product in water
or expose it to rain.
Please read the following before using the Creative products:
• Use a mains plug that is appropriate for your country or region.
• To be completely disconnected from the power input, the mains plug has to be
disconnected / detached from the mains.
• Disconnect the mains plug when the device is expected to be unused for several days.
• Place the product near a socket outlet, which is easily accessible.
Earphones
• When a conductive apparatus such as earphones, is used in close proximity with a
CRT television or CRT monitor, the latter may emit an electrostatic discharge. This
electrostatic discharge can be felt as a static shock. While this static shock is usually
harmless, it is good practice to avoid close contact with CRT devices when using
earphones.
• Do not listen to audio on your earbuds or headphones at high volume for prolonged
periods of time as hearing loss may result.
For users in the United States, go to www.hei.org for more information.
• Do not listen to your audio device at high volume when driving, cycling or crossing
the road, especially in heavy trac, or in any other trac condition where such use
will hinder safe travel on the roads. We recommend that consumers be extremely
cautious when using this device on the road.
Embedded Battery
• Do not attempt to remove the embedded battery. The product must be disposed of
according to local environment regulations.
• Do not expose to excessive heat such as sunshine, re or the like.
CAUTION: Risk of explosion if battery is replaced by incorrect types.
Wireless Device
• The short wave radio frequency signals of a wireless device may impair the operation
of other electronic and medical devices.
• Switch o the device where is prohibited. Do not use the device in medical facilities,
aircraft, refueling points, close to automatic doors, automatic re alarms or other
automatically controlled devices.
• Keep the device at least 20 cm from pacemakers and other medical devices. Radio
waves may impair the operation of pacemakers and other medical devices.
Avoid Hearing Damage
Permanent hearing loss may occur if the player is used at high volume. Set the volume
to a safe level. You can adapt over time to a higher volume of sound that may sound
normal but can be damaging your hearing. If you experience ringing in your ears or
mued speech, stop listening and have your hearing checked. The louder the volume,
the less time is required before your hearing could be aected.
Hearing experts suggest that to protect your hearing:
• Limit the amount of time you use the player at high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking near you.
Assembling the Power Adapter
License and Copyright
The Creative Logo, HanZpad, , Zii, the Zii logo, ZiiSound, and X-Fi are trademarks or
registered trademarks of Creative Technology Ltd in Singapore, China and/or other countries.
The Bluetooth® word mark and logo are owned by Bluetooth SIG, Inc. Android is a trademark
of Google Inc. All other trademarks are the property of their respective owners and are hereby
recognised as such. Specications are subject to change without notice.
Actual contents and colour of the product may dier slightly from those pictured.
Copyright © 2012 Creative Technology Ltd. All rights reserved.
Version 1.00.00
May 2012
DECLARATION OF CONFORMITY
According to the FCC96 208 and ET95-19
Manufacturer/Importer’s Name: Creative Labs, Inc.
Manufacturer/Importer’s Address
: 1901 McCarthy Boulevard
53059 .AC ,satipliM 0066-824)804( :leT
declares under its sole responsibility that the product
Trade Name
: CREATIVE
Model Numbers
: PMT-ZZ0030
has been tested according to the FCC / CISPR22 requirement for Class
B devices and found compliant with the following standards:
EMI/EMC: ANSI C63.4, FCC Part 15 Subpart B& C
Complies with Canadian ICES-003 Class B & RSS-210 standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
Interference that may cause undesirable operation.
Ce matériel est conforme à la section 15 des régles FCC.
Son Fonctionnement est soumis aux deux conditions suivantes :
(1) Le matériel ne peut étre source D’interférences et
(2) Doit accepter toutes les interférences reques, Y compris celles
pouvant provoquer un fonctionnement indésirable.
Supplementary Information:
Compliance Manager
Creative Labs, Inc.
May 31, 2012