Crestron Electronics CWD1016 Transceiver Module User Manual Operations Guide DOC 5811A

Download:
Mirror Download [FCC.gov]
Document ID	923725
Application ID	9jlRFeiLJHjwJxZ4XZeTYQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.51kB (281352 bits)
Date Submitted	2008-04-04 00:00:00
Date Available	2008-04-04 00:00:00
Creation Date	2008-02-28 17:30:18
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2008-03-13 15:31:25
Document Title	Operations Guide - DOC. 5811A
Document Creator	Acrobat PDFMaker 5.0 for Word
Document Author:	crestron

Crestron CWD1016
Two-Way RF Transceiver Module
Hardware Guide
This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2008 Crestron Electronics, Inc.
Crestron CWD1016
Two-Way RF Transceiver Module
Contents
Two-Way RF Transceiver Module:
CWD1016 .......................................2
Introduction ............................................................................................................................... 2
Functions and Features ................................................................................................ 2
Specifications .............................................................................................................. 3
Physical Description.................................................................................................... 3
Industry Compliance ................................................................................................... 5
Setup .......................................................................................................................................... 6
Hardware Hookup ....................................................................................................... 6
Antenna ....................................................................................................................... 6
Mounting ..................................................................................................................... 6
End Product Labeling .................................................................................................. 6
Documentation ............................................................................................................ 6
Hardware Guide - DOC.
Contents • i
Two-Way RF Transceiver Module:
CWD1016
Introduction
Functions and Features
The CWD1016 (hereafter referred to as “module”) is a two-way radio frequency
(RF) module that utilizes the 2.4 GHz frequency band to communicate with other
devices.
The module operates according to the IEEE 802.15.4 specification and can be
configured to minimize the possibility of interference with other devices.
The module receives RF signals from one or more Crestron INET devices and can
transmit these signals over the air or over a cable run for further processing
(depending on the application).
Functional Summary
•
Two-way RF transceiver
− 2.4 GHz frequency band, IEEE 802.15.4 specification
− Range from 3 feet to 150 ft.
− Range is effectively increased with the use of additional INET devices
or repeaters
− Operates on one of sixteen available channels to establish optimal
signal quality
The transceiver produces a 100 milliwatt signal that can travel up to approximately
150 feet indoors. The range is dependent on the construction of the building,
obstructions, and RF interference from other devices. Adding more modules will
increase the range of transmission. The location of the module and the orientation of
its antenna are also important factors in determining RF performance.
Crestron Electronics, Inc.
15 Volvo Drive Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Hardware Guide - DOC. 6351
02.28
INTERNAL USE ONLY
Specifications subject to
change without notice.
Crestron CWD1016
Two-Way RF Transceiver Module
Specifications
The table below is a summary of specifications for the CWD1016.
Specifications of the CWD1016
SPECIFICATION
DETAILS
Power Requirements
Sleep
Receive
Transmit
Operating Frequency
Typical
<5uA
Typical 28mA
Typical 150mA
Max 11uA
Max 35mA
Max 165mA
2400 MHz to 2483.5 MHz (802.15.4 compliant)
Operating Ranges¹
Minimum Distance
3 ft
Maximum Distance Indoors
(without repeater device)
150 ft
Available Channels
16 (numbered 11 through 26 per 802.15.4)
RF Output Power
100 mW
Serial Communications
TTL Level, 38400 Baud, 8 data bits, 1 stop
bit, no parity, software flow control
Antenna
Board mounted chip
Dimensions
Width: 1.88 in (0.477 cm)
Height: 0.82 in (0.208 cm)
Depth: 0.100 in (0.254 cm)
1.
The location of the module and the orientation of the antenna are important factors in the RF
performance. The range is dependent on its placement and the building in which it is used. The
construction of the building, obstructions, and RF interference from other devices are factors
determining the effective range of the unit. To prevent unit-to-unit RF interference, multiple
modules operating at the same frequencies should not be installed within 3-5 feet of each other.
Physical Description
The module, shown below, consists of various components attached to a printed
circuit board. A chip antenna port is located at the right edge of the circuit board,
while a 38-pin interface is located on the edges of the circuit board.
Physical View of CWD1016
Hardware Guide - DOC.
Contents • 3
CWD1016 Detail Views
Power/I-O
An edge connector provides power to the module as well as serial communications between the module and
wired devices. Refer to the following table for pin assignments of the module interface connector.
/I-O Pinout Signals
Pin #
Signal
+5v
Pin #
Signal
Reserved
Pin #
Signal
Pin #
Signal
24
RESET
32
MISO
25
Reserved
33
GND
34
GND
35
PA2
GPIO
GND
10
Reserved
GPIO
Reserved
11
GND
ADC1
26
PWMA
Reserved
12-16
Reserved
27
PWMB
Reserved
Reserved
ADC2
Reserved
ADC3
17-20
GND
28
GND
36
GND
UART RX
29
Reserved
62
GND
63
+5v
GPIO
Reserved
21
GPIO
Reserved
PA1
22
UART TX
30
SCLK
23
Reserved
PA0
31
MOSI
GPIO
Reserved
GPIO
Crestron Electronics, Inc.
15 Volvo Drive Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Hardware Guide - DOC. 6351
02.28
INTERNAL USE ONLY
Specifications subject to
change without notice.
Crestron CWD1016
Two-Way RF Transceiver Module
Antenna
The board mounted chip antenna port is located at edge of the circuit board.
Industry Compliance
Labeling Requirements
If the FCC ID on the CWD1016 is not visible when the module is installed inside
another device, then the outside of the device into which the module is installed must
also display a label referring to the enclosed module. This exterior label can use
wording such as the following: “Contains Transmitter Module FCC ID:
EROCWD1016” or “Contains FCC ID: EROCWD1016.” Any similar wording that
expresses the same meaning may be used.
Compliance Statement (Part 15.19 )
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference
that may cause undesired operation.
Warning (Part 15.21 )
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
RF Exposure (OET Bulletin 65 )
To comply with FCC RF exposure requirements for mobile transmitting devices, this
transmitter should only be used or installed at locations where there is at least 20 cm
separation distance between the antenna and all persons. This device must not be colocated or operating in conjunction with any other antenna or transmitter within the
host device it is installed into.
Industry Canada Statement
Section 7.1.5 of RSS-GEN
Operation is subject to the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including interference that may cause
undesired operation of the device.
OEM Integration :
OEM Responsibility to the FCC Rules and Regulations
The CWD1016 Module has been certified per FCC Part 15 rules for integration into
products without further testing or certification.
To fulfill the FCC certification requirements the OEM of the CWD1016 Module
must ensure that the information provided on the CWD1016 label is placed on the
outside of the final product.
The CWD1016 Module is labeled with its own FCC ID Number. If the FCC ID is
not visible when the module is installed inside another device, then the outside of the
device into which the module is installed must also display a label referring to the
enclosed module.
This exterior label can use wording such as the following:
Hardware Guide - DOC.
Contents • 5
“Contains Transmitter Module FCC ID: EROCWD1016”
or
“Contains FCC ID: EROCWD1016”
The OEM of the CWD1016 Module must only use the approved antenna, which has
been certified with this module.
The OEM of the CWD1016 Module must test their final product configuration to
comply with Unintentional Radiator Limits before declaring FCC compliance per
Part 15 of the FCC rules.
IMPORTANT NOTE: In the event that these conditions cannot be met (for
example co-location with another transmitter), then the FCC authorization is no
longer considered valid and the FCC ID cannot be used on the final product. In these
circumstances, the OEM integrator will be responsible for reevaluating the end
product (including the transmitter) and obtaining a separate FCC authorization.
Setup
Hardware Hookup
Refer to the /I-O Pinout Signals table which shows the connections made to the
module.
NOTE: To prevent unit-to-unit RF interference, multiple modules operating at the
same frequencies should not be installed within three to five feet of each other.
Antenna
The module is provided with an internal antenna.
Mounting
The module has an edge connector for surface mounting to a printed circuit board
(PCB).
End Product Labeling
The final end product must be labeled in a visible area with the following: “Contains
FCC ID: EROCWD1016 .
Documentation
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the users manual of the end
product which integrate this module.
The users manual for OEM integrators must include the following information in a
prominent location
Crestron Electronics, Inc.
15 Volvo Drive Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Hardware Guide - DOC. 6351
02.28
INTERNAL USE ONLY
Specifications subject to
change without notice.
Crestron CWD1016
Two-Way RF Transceiver Module
“IMPORTANT NOTE: To comply with FCC RF exposure
compliance requirements, only the antenna provide with this
transmitter may be installed and this device must not be colocated or operating in conjunction with any other antenna or
transmitter.”
Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
FCC Interference Statement (Part 15.105 (b))
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help
Hardware Guide - DOC.
Contents • 7
This page intentionally left blank
Crestron Electronics, Inc.
15 Volvo Drive Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Hardware Guide - DOC. 6351
02.28
INTERNAL USE ONLY
Specifications subject to
change without notice.
Crestron CWD1016
Hardware Guide - DOC.
Two-Way RF Transceiver Module
Contents • 9

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Page Mode                       : UseNone
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Create Date                     : 2008:02:28 17:30:18-05:00
Modify Date                     : 2008:03:13 15:31:25-05:00
Metadata Date                   : 2008:03:13 15:31:25-05:00
Creator Tool                    : Acrobat PDFMaker 5.0 for Word
Format                          : application/pdf
Creator                         : crestron
Title                           : Operations Guide - DOC. 5811A
Document ID                     : uuid:0df07948-d0d4-4ac2-a801-ec535fe860ef
Instance ID                     : uuid:bb845ec3-a8c9-4dad-91b2-767be997a0d2
Page Count                      : 11
Author                          : crestron

EXIF Metadata provided by EXIF.tools