Cub Cadet 19A70001000 Operators Manual
19A70001000 to the manual 0705fab3-cc5b-4cc2-8d10-83f475511076
2015-01-05
: Cub-Cadet Cub-Cadet-19A70001000-Operators-Manual-163707 cub-cadet-19a70001000-operators-manual-163707 cub-cadet pdf
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
To The Owner • Carton Contents • Assembly • Parts Lists • Warranty OPERATOR’S MANUAL Twin Rear Bagger Kit For i1000 Series Lawn Tractors with a 42” Timed Deck Model 19A70001000 IMPORTANT READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION PRINTED IN U.S.A. CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 FORM NO. 769-03805A 4/10/2008 This Operator’s Manual is an important part of your new grass collector. It will help you assemble, prepare and maintain the unit for best performance. Please read and understand what it says. Finding and Recording Model Number BEFORE YOU START ASSEMBLING YOUR NEW EQUIPMENT, please locate the model plate and copy the information from it in this Operator’s Manual for future reference. The information on the model plate is very important if you need help from our Customer Support Department or your authorized dealer. You can locate it by looking on the front, left portion of the plastic grass catcher cover as seen below: Model Number Serial Number CUB CADET LLC P. O. BOX 361131 www.cubcadet.com CLEVELAND, OH 44136 DEALER LOCATOR PHONE NUMBER: 877-282-8684 *Locate the model plate on your bagger and copy the information from it in the space provided above for future reference. Customer Support Please do NOT return the unit to the retailer from which it was purchased, without first contacting Customer Support. If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this unit, you can seek help from the experts. Choose from the options below: • Visit www.cubcadet.com for many useful suggestions. Click on the Customer Service link and you will get several options to help in answering your questions. Click on the appropriate button and help is immediately available. • Phone our Customer Dealer Referral Line, to find a dealer nearest you, at 1(877) 282-8684. To The Owner NOTE: References to LEFT and RIGHT indicate the left and right sides of the tractor when facing forward in the operator’s position. Reference to the FRONT indicates the grille end; to the REAR, the rear end of the tractor. The Model 19A70001000 Twin Bag Grass Collector is a grass collection system specifically designed for use on Cub Cadet I-1000 Series lawn tractors equipped with a 42-inch timed mowing deck. Carefully read all sections and study the illustrations to ensure proper installation and usage of this attachment. Read and observe all WARNING and CAUTION statements. They are included to provide for the protection of the equipment installer and user, and to ensure the prolonged service life of the equipment. 2 NOTES Use this page to make notes and write down important information. 3 2 Carton Contents CONTENTS OF CARTON Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents are listed below and shown in Figure 2-1. One Chute Tube Two Mounting Brackets One Discharge Chute Assembly One Cross-Support Bracket Two Grass Bag Assemblies Two Bracket Supports One Support Tube One Catcher Support One Grass Catcher Cover Assembly Chute Tube Discharge Chute Assembly If you are missing any parts, call the Customer Dealer Referral Line at 1-877-282-8684, or visit www.cubcadet.com to find the nearest Cub Cadet service dealer in your area. Support Tube Grass Bag Cover Assembly Bracket Support Grass Bag Assemblies Catcher Support Mounting Bracket Cross Support Bracket Figure 2-1 4 CONTENTS OF HARDWARE PACK This grass collector kit is shipped with a hardware pack enclosed. Please check your hardware pack against the illustration below. Group A Assembling and Attaching Mounting Bracket 2 Carton Contents Clevis Pin (1) Hex Bolt 5/16-18 x .750 (6) Hairpin Clip (1) Flange Lock Nut 5/16-18 (6) Hex Bolt 1/4-20 x .620 (8) Flange Lock Nut 1/4-20 (8) Figure 2-2 5 If you are missing any parts, call the Customer Dealer Referral Line at 1-877-282-8684, or visit www.cubcadet.com to find the nearest Cub Cadet service dealer in your area. 3 Assembling and Attaching Mounting Bracket Assembling and Attaching The Bracket Assembly (Hardware Group A) IMPORTANT: Before assembly, place the tractor on a firm, level surface, disengage the PTO, stop the tractor engine and set the parking brake. 1. Assemble the mounting bracket assembly as shown in Figure 3-1. NOTE: The mounting bracket assembly may have been preassembled at the factory, if this is the case, skip Step 1 and proceed to Step 2. 2. For convenience, pivot the seat forward and leave it in that position until the grass collector is fully mounted and assembled. 3. Position the bracket assembly to the outside of the hitch plate. See Figure 3-2. Figure 3-2 4. Push the hooked ends of the bracket assembly in (A) and under the shoulder bolts (B) and swing in the bottom down over the hitch plate aligning with the hole on the hitch plate (C). See Figure 3-3. 5. Insert the clevis pin through the aligned holes in both the bracket assembly and the hitch plate and secure with the hairpin clip. Refer to Figure 3-4. IMPORTANT: Before assembly, place the tractor on a firm, level surface, disengage the PTO, stop the tractor engine and set the parking brake. A NOTE: There are two holes in the clevis pin. Be sure to insert the hairpin clip in the upper hole to properly secure the bracket assembly to the hitch plate. C B Figure 3-3 NOTE: There are two holes in the clevis pin. Be sure to insert the hairpin clip in the upper hole to properly secure the bracket assembly to the hitch plate. Upper Hole Figure 3-1 Figure 3-4 6 Attaching Grass Bags & Grass Bag Cover 1. Place the support tube in position on the rear of unit by sliding the support tube down through the holes in the left side of the bracket assembly. Use the inside hole on the bracket assembly. Refer to Figure 4-1. 2. Attach the grass bags by hooking them onto the grass bag bracket using the slots in the grass bag and the tabs on the grass bag bracket as shown in Figure 4-2. 3. Remove the clevis pins, belleville washers, and hairpin clips, from the hinge brackets on the grass bag cover. 4 Attaching Grass Bags & Grass Bag Cover 4. Place the grass bag cover on top of the grass bags and align the holes on the hinges of the grass bag cover with the corresponding holes on the support tube assembly. See Figure 4-3. Figure 4-1 5. Insert the clevis pin through the hinge on the support tube assembly and then through the grass bag cover. See Figure 4-4. 6. Secure with belleville washer and hairpin clip with the crown side of the washer going against the hairpin clip. See inset images in Figure 4-4. 7. Repeat with the second set of hardware through the second hinge of the grass bag and the tube assembly from the opposite direction. NOTE: Insert the clevis pins from the outside in as shown in the inset images of Figure 4-4. It is very important to maintain this order and direction while installing these hardware pieces. After installation, make sure that the grass bag cover pivots on the support tube and opens. Figure 4-2 Figure 4-4 Figure 4-3 7 NOTE: Insert the clevis pins from the outside in as shown in the inset images of Figure 4-4. NOTE: It is very important to maintain this order and direction while installing these hardware pieces. After installation, make sure that the grass bag cover pivots on the support tube and opens. 5 Attaching Discharge Chute & Bagger Usage Attaching Discharge Chute A 1. Lower the deck to its lowest position. 2. Raise the chute deflector on the deck (A) and hold it while you position the discharge chute over the chute opening. See Fig. 5-1. B 3. Insert the pin (B) on the discharge chute into the hole on the deck as indicated by the arrow in Fig. 5-1. 4. Push down on the discharge chute so that it covers the opening of the deck completely. C 5. Lock the discharge chute in position by stretching the retainer strap over the front deck wheel bracket and hooking onto the bottom of the bracket as seen in the inset (D) in Fig. 5-1. D 6. Insert the curved end of chute tube into the hole in the grass bag cover. See Fig. 5-2. Figure 5-1 7. Place the lower end of the chute tube over the discharge chute so that the tabs on the discharge chute fits into the pockets on the chute tube. See Fig. 5-3. 8. Secure by hooking the two retainer straps of the discharge chute to the pins on the chute tube. See Fig. 5-3. Bagger Usage NOTE: When both grass bags are full, place the tractor on a firm, level surface, disengage the PTO, turn the tractor engine off and set the parking brake. 1. Flip Seat up. 2. Lift up grass bag cover. Do not remove the chute tube assembly from the tractor. 3. Remove the grass bags by lifting these up and moving the bags away from the support tube assembly. 4. Empty the grass clippings at a proper disposal sight, use the handle at the bottom of each grass bag. Holding the bag firmly, empty the contents Figure 5-2 5. Replace grass bags, close lid, flip down seat, restart your tractor and resume cutting your grass. Pocket Tab Figure 5-3 8 6 NOTES Use this page to take notes and write down important information. 9 4 18 11 12 2 16 14 19 17 12 14 8 21 17 20 13 1 7 30 14 9 32 20 14 20 7 28 29 26 17 27 13 31 24 14 25 13 10 23 22 9 6 3 15 10 PART NUMBER 8 DESCRIPTION 1 16587D Bracket Support 2 16592 Support Tube Assembly 3 764-0221 Catcher Bag 4 664-04017 Grass catcher Cover Assembly 5 683-04348 Mounting Bracket - RH 6 683-04350 Mounting Bracket - LH 7 710-0597 Screw 1/4-20 x 1” 8 710-0751 Hex Screw 1/4-20 x0.620 9 710-3008 Hex Screw 5/16-18 x 0.75” 10 711-0309A Clevis Pin 711-04069 Grass catcher Pin 711-1421 Clevis Pin 13 712-04063 Flange Lock Nut, 5/16-18 14 712-04064 Flange Lock Nut, 1/4-20 15 714-0117 Hairpin Clip 16 714-0145 Click Pin 17 723-04008A Chute Strap - 6” 18 731-0899E Catcher Tube 19 736-0331 Bell Washer 20 736-3092 Flat Washer 21 783-0601 Catcher Support Bracket 22 783-0765 Cross Support Bracket 23 864-0221 Grass Bag Assy. 24 16591A Bag Hanger Bracket 25 710-0473 Machine Screw, #10-24 x .5 26 710-0604A Self-Tapping Screw 5/16-18 27 712-0272 Hex Sems Nut, #10-24 28 749-0701A Grass Bag Frame 29 711-05008 Belt Pin Guard, 1/4 x 1.43 30 731-06099 Chute Elbow, 42” Timing Deck 31 732-04510 Spring Hook 32 738-0754 Shoulder Screw, .437 x .54 11 GE CT FA 11 12 Illustrated Parts List NUINE T S REF NO. O R Y PA R To order replacement parts, call the Customer Dealer Referral Line at 1-877-282-8684, or visit www.cubcadet.com to find the nearest Cub Cadet service dealer in your area. CUB CADET LLC MANUFACTURER’S LIMITED WARRANTY FOR SEPARATELY SOLD ATTACHMENTS AND ACCESSORIES IMPORTANT: To obtain warranty coverage owner may be required to present an original proof of purchase and applicable maintenance records to the servicing dealer. Please see the operator’s manual for information on required maintenance and service intervals. a. Routine maintenance items such as lubricants, filters, blade sharpening, tune-ups, brake adjustments, clutch adjustments, deck adjustments, and normal deterioration of the exterior finish due to use or exposure. The limited warranty set forth below is given by Cub Cadet LLC with respect to new merchandise purchased or leased and used in the United States and/or its territories and possessions, and by MTD Products Limited with respect to new merchandise purchased or leased and used in Canada and/or its territories and possessions (either entity respectively, “Cub Cadet”). b. Service completed by someone other than an authorized service dealer. Cub Cadet warrants this product (excluding its Normal Wear Parts, as described below) against defects in material and workmanship for a period of three (2) years commencing on the date of original retail purchase or lease and will, at its option, repair or replace, free of charge, any part found to be defective in materials or workmanship. d. Replacement parts and\or accessories that are not genuine Cub Cadet parts. Normal Wear Parts are warranted to be free from defects in material and workmanship for a period of thirty (30) days from the date of original purchase or lease. Normal wear parts include, but are not limited to items such as: belts, blades, blade adapters, grass bags, rider deck wheels, seats, and tires. This limited warranty shall only apply if this product has been operated and maintained in accordance with the Operator’s Manual furnished with the product, and has not been subject to misuse, abuse, neglect, accident, improper maintenance, alteration, vandalism, theft, fire, water, or damage because of other peril or natural disaster. Damage resulting from the installation or use of any part, accessory or attachment not approved by Cub Cadet for use with the product(s) covered by this manual will void your warranty as to any resulting damage. In addition, Cub Cadet may deny warranty coverage if the hour meter, or any part thereof, is altered, modified, disconnected or otherwise tampered with. HOW TO OBTAIN SERVICE: Warranty service is available, WITH PROOF OF PURCHASE AND APPLICABLE MAINTENANCE RECORDS, through your local authorized service dealer. To locate the dealer in your area: In the U.S.A.: Check your Yellow Pages, or contact Cub Cadet LLC at P.O. Box 361131, Cleveland, Ohio 44136-0019, call 1-877-282- 8684 or log on to our website at www.cubcadet.com. In Canada: Contact MTD Products Limited, Kitchener, ON N2G 4J1, call 1-800-6681238 or log on to our website at www.mtdcanada.com. Without limiting the foregoing, this limited warranty does not provide coverage in the following cases: c. Cub Cadet does not extend any warranty for products sold or exported outside of the United States and/or Canada, and their respective possessions and territories, except those sold through Cub Cadet’s authorized channels of export distribution. e. Transportation charges and service calls. f. Commercial or Institutional Use. There are no implied warranties, including without limitation any implied warranty of merchantability or fitness for a particular purpose. No warranties shall apply after the applicable period of express written warranty above. No other express warranties beyond those mentioned above, given by any person or entity, including a dealer or retailer, with respect to any product, shall bind Cub Cadet. The exclusive remedy is repair or replacement of the product as set forth above. The terms of this warranty provide the sole and exclusive remedy arising from the sale and/or lease of the products covered hereby. Cub Cadet shall not be liable for any incidental or consequential loss or damage including, without limitation, expenses incurred for substitute or replacement lawn care services or for rental expenses to temporarily replace a warranted product. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. In no event shall recovery of any kind be greater than the amount of the purchase price of the product sold. Alteration of safety features of the product shall void this warranty. You assume the risk and liability for loss, damage, or injury to you and your property and/or to others and their property arising out of the misuse or inability to use the product. This limited warranty shall not extend to anyone other than the original purchaser or to the person for whom it was purchased as a gift. HOW LOCAL LAWS RELATE TO THIS WARRANTY: This limited warranty gives you specific legal rights, and you may also have other rights that vary in different jurisdictions. Cub Cadet LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019, Phone: 1-877-282-8684 MTD Products Limited, Kitchener, ON N2G 4J1, Phone: 1-800-668-1238 GDOC-100177 REV. A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c320 44.284297, Sun Apr 15 2007 17:19:00 Create Date : 2008:02:15 11:04:14-05:00 Metadata Date : 2008:04:10 09:22:43-04:00 Modify Date : 2008:04:10 09:22:43-04:00 Creator Tool : Adobe InDesign CS3 (5.0.2) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 11799 bytes, use -b option to extract) Instance ID : uuid:dbc2e773-cdbf-4154-8ffa-81c8f0f78e39 Document ID : adobe:docid:indd:e133c3a1-819a-11dc-b494-d0c65513a3e9 Rendition Class : proof:pdf Derived From Instance ID : c3e7ac0c-db9b-11db-aa36-c18fe08edf97 Derived From Document ID : adobe:docid:indd:8866ad63-52d9-11db-945b-8c0a884b04c6 Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 12 Creator : Adobe InDesign CS3 (5.0.2)EXIF Metadata provided by EXIF.tools