Culligan Hd 202 Users Manual Hi Flo 55 Filters

HD-242 Hi-Flo55

: Culligan Culligan-Hd-202-Users-Manual-533599 culligan-hd-202-users-manual-533599 culligan pdf

Open the PDF directly: View PDF .
Page Count: 19

Download
Open PDF In Browser	View PDF

More

Culligan®
Heavy Duty
Commercial
Filters
apartments
assisted living facilities
cafeterias
casinos
corporate campuses
educational facilities
food service
government
grocery
health clubs
hotel/ hospitality
institutions
laundry
manufacturing facilities
theme parks
travel centers
vehicle wash

Culligan’s Hi-Flo® 55e Commercial Filters
Standard Features
• 24 Volt Culligan’s MVP™ Controller – Field
programmable with a back-lit LCD display and
UL listed 120v/24v transformer.
• Single, Duplex, Triplex, or Quad Configurations
• Regeneration initiation by choice of time clock,
meter or differential pressure switch.
• Carbon Filters – For reduction of organics (flow
rates up to 39gpm), or chlorine (flow rates up to
77gpm).

Trust The Water Experts®

• Depth Filters – Flow rates up to 193gpm.
• Top-Mounted Control Valve – Keeps plumbing
connections simple and adaptable. Full flow
porting with rounded orifices and wide-open
cartridges promote good flow characteristics and
low pressure fluctuations.
• Corrosion resistant tanks – Made of low carbon
steel with epoxy interior lining and finish coat
painted exterior.

Culligan’s Hi-Flo® 55e Commercial Filters
• Light Industry Processes—Reduces particulate matter.
• Pretreatment—For softeners, RO’s and DI systems.
• Vehicle Wash—Turbidity reduction.

Applications and Benefits
• Food and Beverage–Superior taste and increased
cost savings.
• Drinking Water–Reduces turbidity and chlorine;
improves taste and clarity.
• Boilers—Turbidity reduction, minimize sludge
blowdown.

Options

Warranty
Culligan’s Hi-Flo 55e water filters are
backed by a limited 1-year warranty
against defects in material,
workmanship and corrosion. In
addition, tanks carry a limited 5-year
warranty.*

• Patented Progressive FlowCulligan’s MVP™ controller can
monitor flow demands, bringing
additional tanks on-line or off-line
as flows increase or decrease.
• Differential Pressure Switch
• A.S.M.E. Code Tanks
• Sample cocks and pressure gauges
• Separate source regeneration kits
• Skid mounting
• Flow meter

Pressure:

30–100 psig
207–690 kPa
120 VAC/24 VAC
50/60 Hz
40–120°F
4–49°C

Power:
Temperature:

* See printed warranty for details.
Culligan will provide a copy of the
warranty upon request.

Water Quality
High**
Flow Rate
Pressure
(GPM)
Loss (PSI)

Utility***
Flow Rate
Pressure
(GPM)
Loss (PSI)

Backwash
Flow Rate
(GPM)

Valve
Size
(inches)

Depth Filters

Superior*
Flow Rate
Pressure
(GPM)
Loss (PSI)

HD-202
HD-242
HD-302
HD-362
HD-423

22
32
50
71
97

2
2
4
5
3

33
48
74
107
145

3
5
7
11
6

44
63
99
142
193

5
7
12
19
9

30
45
70
100
135

2
2
2
2
3

Carbon Filters

Model

System Specifications

HR-202
HR-242
HR-302
HR-362
HR-422

191
131
201
291
391

01
11
21
21
31

14
19
30
42
58

1
1
1
4
5

182
262
402
572
772

22
22
32
62
82

20
30
45
70
100

2
2
2
2
2

*

Superior – Best quality water with lowest pressure loss. Recommended for influent suspended solid loads up to and greater than 300 ppm.
High – Very good quality water with increased pressure loss. Recommended for influent suspended solid loads less than 300 ppm.
Utility – Satisfactory quality water with greatest pressure loss. Shorter on line time between backwashing. Recommended for influent suspended solid
loads less than 150 ppm.
1
For Sediment and organic removal use the flow rates from the superior water quality column.
2
For chlorine removal only, use the flow rates from the utility water quality column.
**

***

All pressure drop figures are based on new filter media and a water temperature of 60°F.
Depth filters are capable of 10 micron effluent water quality, whereas all other filter types are capable of 40 micron effluent water quality.

“Hey Culligan Man!”®
www.culligan.com™
1-800-CULLIGAN
©2003 Culligan International Co.
Printed in USA (12/03)
MOORE PART NO. 47601

ISO 9001
Certification

Products manufactured and marketed by Culligan International Company (Culligan) and its affiliates are protected by patents issued or pending in the United States and other
countries. Culligan reserves the right to change the specifications referred to in this literature at any time, without prior notice.
, Brunermatic, Hey Culligan Man,
Culligan Man, Culligan Commercial @ Work, www.culligan.com and Culligan Service Network are trademarks of Culligan International Company or its affiliates.

HI-FLO®
DEPTH FILTERS
FOR SEDIMENT REDUCTION
SPECIFICATIONS AND OPERATING DATA
Hi-Flo 55
MODEL NUMBER

Hi-Flo 50

HD-202 HD-242 HD-302 HD-362 HD-423 HD-483 HD-544 HD-604 HD-726 HD-846

Peak
Service Flow @
Pressure Drop

gpm

30

45

75

100

150

190

240

300

440

600

@ psi

@3

@4

@7

@ 10

@6

@ 10

@8

@ 10

@ 10

@ 10

L/min

114

170

284

379

568

719

908

1,140

1,670 2,270

@ 21

@ 28

@ 42

@ 69

@ 41

@ 69

@ 55

@ 69

@ 69

@ 69

15

20

35

50

70

90

110

140

200

270

@ psi

@1

@1

@2

@3

@2

@3

@3

@2

@2

@2

L/min

57

76

132

189

265

340

420

530

750

1,020

@ 14

@ 21

@ 14

@ 20

@ 20

@ 14

@ 14

@ 14

400

540

@ kPa
Normal
Service Flow @
Pressure Drop

gpm

@ kPa
Backwash Flow

@ 6.9 @ 6.9

gpm

30

45

70

100

135

188

210

270

L/min

114

170

265

379

511

712

795

1,020

in

20

24

30

36

42

48

54

60

mm

510

610

760

910

1,070

1,220

1,370

1,520

in

48

48

48

54

54

60

60

60

1,220

1,220

1,220

1,370

1,370

1,520

1,520

1,520

1,510 2,040

Tank Size
Diameter

Sideshell

mm

72

84

1,830 2,130
60

60

1,520 1,520

Pipe Size
Inlet/Outlet

in

2

2

2

2

3

3

4

4

6

6

Media Volume

ft3

5

8

12

17

23

32

40

49

70

97

0.142

0.227

0.340

0.481

0.651

0.906

1.13

1.39

1.98

2.75

lb

870

1,150

1,750

2,530

3,550

7,000

8,800 10,800 18,500 25,000

kg

390

520

790

1,150

1,610

3,175

4,000

3

m
Ship Weight, Approx.

4,900

8,390 11,340

NOTES:
1 Service flow rates are based on 7 gpm/ft2 (26 L/m2/min) for Normal and 15 gpm/ft2 (57 L/m2/min) for Peak Flow rates. Actual service rate can vary from
2 to 20 gpm/ft2 (8 - 76 L/m2/min) depending upon the application and the raw water.
2 Backwash flow rates are based on 12-14 gpm/ft2 (45-53 L/m2/min) using 50° F (10° C) water. A different backwash rate may be required depending upon
water temperature or the type of carbon used.
3 Operational, maintenance and replacement requirements are essential for this product to perform as advertised. Service is available through independently
operated Culligan dealerships.

Commercial Systems
©2000 Culligan
1-800-CULLIGAN
www.culligan.com
Printed in USA Rev. 4/00
DCO 992587
SL-0070
Moore Part No. 46924

HI-FLO®
CULLAR® AUTOMATIC FILTERS FOR
DECHLORINATION AND ORGANIC ADSORPTION
SPECIFICATIONS AND OPERATING DATA
Hi-Flo 55

Hi-Flo 50

HR-422 HR-4825 HR-543 HR-603 HR-724 HR-844
HR-202 HR-242 HR-302 HR-362 HR-423

MODEL NUMBER
Dechlorination
Service Flow @
Pressure Drop

gpm

20

30

50

70

100

125

160

200

280

380

@ psi

@2

@2

@4

@8

@ 13

@ 16

@ 18

@ 13

@ 12

@ 16

L/min

76

114

189

265

379

473

606

757

1,060

1,440

@ 14

@ 14

@ 28

@ 55

@ 90

@ 90

@ 83

@ 110

10

15

25

35

50

65

80

100

140

200

@ psi

@1

@1

@2

@3

@4

@4

@6

@4

@5

@6

L/min

38

57

95

132

189

246

303

379

530

757

@ 14

@ 21

@ 28

@ 28

@ 41

@ 28

@ 34

@ 41

@ kPa

@ 110 @ 124

Organics Adsorption
Service Flow @
Pressure Drop

gpm

@ kPa
Backwash Flow

@ 6.9 @ 6.9

gpm

20

30

45

70

100

136

160

210

270

400

L/min

76

114

170

265

379

515

606

795

1,020

1,510

in

20

24

30

36

42

48

54

60

72

84

mm

510

610

760

910

1,070

1,220

1,370

1,520

1,830

2,130

in

48

48

48

54

54

60

60

60

60

60

1,220

1,220

1,220

1,370

1,370

1,520

1,520

1,520

1,520

1,520

Tank Size
Diameter

Sideshell

mm
Pipe Size
Inlet/Outlet

in

2

2

2

2

2

2.5

3

3

4

4

Media Volume

ft3

6

8

12

18

24

32

40

48

70

96

0.170

0.227

0.340

0.510

0.680

0.910

1.13

1.36

1.98

2.72

lb

530

670

1,000

1,420

2,000

5,200

6,500

8,000 12,500 17,000

kg

240

300

450

640

910

2,400

2,900

3,600

3

m
Ship Weight, Approx.

5,700

7,700

NOTES:
1 Service flow rates are based on 5 gpm/ft2 (19 L/m2/min) for Organic Adsorption and 10 gpm/ft2 (38 L/m2/min) for Dechlorination. Actual flow rate may vary
depending upon the application and the raw water.
2 Backwash flow rates are based on 10 gpm/ft2 (38 L/m2/min) using 50° F (10° C) water. A different backwash rate may be required depending upon
water temperature or the type of carbon used.
3 Operational, maintenance and replacement requirements are essential for this product to perform as advertised. Service is available through independently
operated Culligan dealerships.

Commercial Systems
©2000 Culligan
1-800-CULLIGAN
www.culligan.com
Printed in USA Rev. 4/00
DCO 992587
SL-0071
Moore Part No. 46925

HI-FLO®
CULLSORB® AUTOMATIC FILTERS FOR
IRON AND MANGANESE REDUCTION
SPECIFICATIONS AND OPERATING DATA
Hi-Flo 55

HG-202 HG-242 HG-302 HG-362 HG-423 HG-4825 HG-5425 HG-6025 HG-723 HG-844

MODEL NUMBER
Service Flow @
Pressure Drop

gpm

10

15

25

35

50

65

80

100

140

190

@ psi

@3

@3

@4

@4

@4

@4

@6

@4

@5

@6

L/min

38

57

97

132

190

250

300

380

530

720

@ 21

@ 21

@ 28

@ 28

@ 20

@ 28

@ 41

@ 28

@ 34

@ 41

gpm

30

45

70

100

135

160

210

240

350

480

L/min

110

170

270

380

510

610

800

910

1,330

1,820

in

20

24

30

36

42

48

54

60

72

84

mm

510

610

760

910

1,070

1,220

1,370

1,520

1,830

2,130

in

48

48

48

54

54

60

60

60

60

60

1,220

1,220

1,220

1,370

1,370

1,520

1,520

1,520

1,520

1,520

@ kPa
Backwash Flow

Hi-Flo 50

Tank Size
Diameter

Sideshell

mm
Pipe Size
Inlet/Outlet

in

2

2

2

2

3

2.5

2.5

2.5

3

4

Media Volume

ft3

5

8

12

19

25

34

43

53

76

104

0.156

0.212

0.340

0.538

0.708

0.962

1.22

1.50

2.15

2.94

lb

850

1,150

1,790

2,680

3,720

7,200

9,100 11,600 17,500 27,000

kg

385

522

812

1,220

1,690

3,300

4,100

3

m
Ship Weight, Approx.

5,300

7,900 12,000

NOTES:
1 Service flow rates are based on 5 gpm/ft2 (19 L/m2/min). Actual flow rate may vary depending upon the application and the raw water.
2 Backwash flow rates are based on 12-14 gpm/ft2 (45-53 L/m2/min) using 50° F (10° C) water. A different backwash rate may be required depending upon
water temperature or other water conditions.
3 Operational, maintenance and replacement requirements are essential for this product to perform as advertised. Service is available through independently
operated Culligan dealerships.

Commercial Systems
©2000 Culligan
1-800-CULLIGAN
www.culligan.com
Printed in USA Rev. 4/00
DCO 992587
SL-0071
Moore Part No. 46925

More

Softeners

Introducing the Culligan® MVP Electronic Controller

• Hi-Flo ® 2E
• CSM
• Hi-Flo ® 55E
• Hi-Flo ® 50

Filters
• Hi-Flo ® 2E
• Hi-Flo ® 42
• CSM
• Hi-Flo ® 55E
• Hi-Flo ® 50

Trust The Water Experts®

M
V
P

Multifunctional
Sequences the regeneration process of water
softeners or filtration systems
Time, Volume, Aqua-Sensor®*or external device
Can be used as a simple timer or more
complex system integrator

Versatile
Patented Progressive Flow** feature permits
smaller systems to provide greater flow rates
and treatment capacities
Will adapt to many types of water softeners,
filters or dealkalizers
As many as 6 controls may be linked together,
allowing for simple, future expansion
Operates on 24 VAC

Programmable
Time based regeneration schedule can be
interval of days or hours or specific day of
week
Programmable trip point allows multiple
units to be brought online or offline as flow
demand increases or decreases
Two auxilliary outputs and one input can be
programmed to be active or deactive at any
point of the regeneration process.

Culligan® MVP Designed With The Ease
of 24-volt Operation.
Time of Day
Displays time in 12 hour
(AM/PM) or 24 hour formats.

corporate campuses
educational facilities

Screen Blanking
Allows the screen to go
blank once programming
is complete (After 5
minutes of no keypad
activity).

EEPROM
Saves programmed and
statistical functions.

Power Source
Electrical power required
for the control is 24-volt
50/60 Hz AC current. A
plug-in transformer
(120v/24v) is provided.

food service
grocery
hotel/hospitality

One-Touch Program Update
Update multiple controls
through the touch of a button
on the primary control.

laundry
vehicle wash

Program Beeper
Emits an audible beep
when key pads are
depressed to help identify
valid (short beep) or
invalid (3 short beeps)
key pad touches. Can be
enabled or disabled as
desired.

Lock/Unlock
Allows the control to be easily
locked out from inadvertent
program changes or abuse.

Multi-Unit Communication Input/Output (RS485)
The communication input/output feature routinely
recognizes when another controller within a
multiple controller system is in a regeneration
sequence, prohibiting the chance of multiple units
regenerating simultaneously.

Additional MVP Features
• Battery Backup - The optional battery backup
will maintain the time of day for a minimum of 4
weeks using a 3.6V 1/2AA-lithium type battery as
supplied by Culligan.

• Auxillary Input - capable of accepting a remote
signal from a dry contact device such as an
operator push-button for the purpose of
initiating the regeneration sequence.

• Regeneration Start Delay - A user determined
number of hours (up to 9) can be input for the
purpose of increasing time between multiple
regeneration initiations.

• Segmented Brine Draw/Rinse Cycle - Brine
Reclaim Capability - allows the user to configure
the system for brine reclaim with a minimum of
additional valves and/or other types of hardware.

®

“Hey Culligan Man!”
* Aqua-Sensor: Patent # US 5,699,272
** Progressive Flow: Patent # US 5,060,167 , # US 5,351,199

www.culligan.com
1-800-CULLIGAN
©2003 Culligan International Co.
Printed in USA (5/03)
MOORE PART NO. 46968

MVP
Controller

ISO 9001
Certification

Check for compliance with state and local laws and regulations. Do not use with water
that is microbiologically unsafe or of unknown quality without adequate disinfection
before or after the system. Systems certified for cyst reduction may be used on disinfected
waters that may contain filterable cysts.

, Aqua-Sensor, www.culligan.com and Hey Culligan Man are trademarks of Culligan International Company.

More

TM

THE

XLF FLOW SENSOR PACKAGE
For use with IQS Electronic Water Treatment Equipment Controller

REGENERATION CONTROLS
Product Description

XLF Flow Sensor

Iron Saddle

The XLF flow sensor package is an input device for the IQS type controller used to measure
treated water flow. Flow data then provides one or all of the following functions:
•repeatedly measure and deliver a specified volume of treated water.
•digital instantaneous flow rate.
•digital instantaneous total treated water usage.
Packages are available for use in treated water pipe sizes from 1 inch through 6 inch. A wide
variety of installation fittings are available to assure compatibility with many commonly used
plumbing materials:
•Threaded galvanized
•Copper sweat
•PVC; CPVC
•Iron
•Steel
The XLF flow sensor package is comprised of:
•One (1) paddlewheel insertion type flow sensor element sized for the specified
pipe diameter
•One (1) installation fitting for the specified pipe type and size.

How It Works

Copper/Bronze Tees

Iron Tee

The solid state paddlewheel flow sensor
works on a simple, but precise, electromechanical principle. A magnetic rotor
positioned in the flow stream spins past a
solid state switch which in turn pulses a
low voltage DC current proportional to the
rate of flow. The rotor design ensures an
accurate, repeatable output throughout the
sensor's entire operating range with
negligible head loss and no cavitation.

Features & Benefits
PVC Tee

Bronze
Brazolet

•Flow range; 0.3 ft/s to 20 ft/s
•Low cost.
•Low pressure loss.
•Ease of installation and service.
•Excellent resistance to corrosion and wear
•High accuracy and repeatability.
•Compatible with most types of piping materials – PVC, copper, brass, galvanized iron and
steel.
•Wide range of temperature pressure and flow characteristics.
•Low voltage operation.
•Tested to NIST standards (National Institute of Standards and Techonology).

FLOW SENSOR APPLICATION DATA
To select the flow sensor package that best fits your requirements,
consider these application parameters:
1. Determine Installation Fitting Type – fittings are available for a
variety of piping materials.

Installation Fitting
Pipe Size – (Inches)

2. Determine Installation Fitting Size – identify the HIGHEST
anticipated flow rate which would occur regularly thru EACH tank
of a single/multiple tank network. Match this value against those in
the MINIMUM and MAXIMUM FLOW column of the Flow Rate
Range Table to find the corresponding installation Fitting Pipe Size.
3. Verify Temperature/Pressure Operating Range – the maximum
operating pressure for the XLF series flow sensor is dependent on
the measured fluid temperature and type of installation fitting. Refer
to the Temperature/Pressure Graph for operating range. Refer to
OPTIONS paragraph for applications requiring a higher
temperature/pressure rating.

For Temperature/Pressure Conditions beyond
Operating Range of XLF Sensors see OPTIONS

Pressure (PSIG)

Operating Range
Flow Sensors
And Installation Fittings

up
in.10

50

0

500F

1000F

We
ldo-l
ets
2.5
to
8
Iron Saddles 2 to 8 in.

les
add
nS
Iro
nd
sa
-let
ld-o
We
tal
Me

100

in.
/M
eta
l

in.

Br
on
ze

1500F

2000F

Cv
Factor

■

Flow Rate Range – (GPM)
Minimum ▲
Maximum

1 **
11/4 **
11/2 **

39.0
56.0
84.0

0.7
1.2
1.7

44.0
80.0
110.0

2 **
21/2 ***
3 ***

157.0
273.0
483.0

2.8
4.5
6.9

187.0
298.0
460.0

4 ***
5 ***
6 ***

977.0
1750.0
2846.0

11.9
18.7
27.0

793.0
1247.0
1800.0

8 ***
10 ***

5773.0
10,660.0

47.0
74.0

3118.0
4915.0

(

200
Me
tal
Te
es
0.5
to
2

▲

▲ Choose the Installation Fitting Pipe Size principally on the MINIMUM flow rate that would
occur REGULARLY in the treated water stream of each water treatment tank.
DO NOT OVERSIZE THE INSTALLATION FITTING!
■ C = flow rate (GPM) @ 1.0 psi head loss; 60°F water temperature.
V
includes worst case requirement of 50 pipe diameters before and 5 pipe diameters
following the flow sensor location assuring minimum flow turbulence.

Temperature/Pressure Relationship Table

150

** Threaded Tee Sch 40 Galv. Pipe
*** Cast Iron Saddle Sch 40 Pipe

Flow Rate Range Table

Flow Sensor Selection

2500F

Operating Temperature

*Number of pipe
Specifications
diameters required
Pressure Loss @ maximum rated flow: Less
adjacent to flow
than 3.5 psig. See formula †
sensor location
• includes head loss of required straight length
dependent on source
of pipe both before and after flow sensor
of upstream turbulence:
location.(maximum requirement –55 diameters)
Electrical Output:
C Factor:■
See Flow Range
*Requires DC Current
V
Table
from IQS/3;+5VDC
@ 10 ma.
Flow Rate Range:
0.3 thru 20 feet per
second fluid velocity
Environmental:
Ambient temperature
Output Linearity:
± 1% of maximum
Relative Humidity:
range
Accuracy:

± 1% of maximum
range

Repeatability:

± 0.5% of full
range

Wetted Materials:

Polypropylene, Viton,
Titanium, PVDF

† PRESSURE LOSS FORMULA (S.G.=1.0)
Flow (GPM)
( Actual
) = Pressure
Loss @ Actual Flow
C Factor ■
(PSI)
(GPM)
V

Options
Installation Fitting Service Plug:
Allows resumption of flow after depressurization and removal of flow
sensor element.
Wet Tap Assembly:
Provides a safe and fast method of removing a flow sensor element
without shutting off flow and pressure.
(Maximum Pressure – 100 psig @ 680F; Maximum Temperature – 140°F
@ 25 psig)

)

*Maximum
Temperature:

185°F @ 25 psig

*Maximum
Pressure:

180 psig @ 680F

Installation Requirements:
*Maximum wire length 200 ft. –contact
between sensor and factory for greater
IQS/3 Controller
distance requirements

15 minimum/
55 maximum

Open Collector,
transistor, sinking

-40F to 1220F
0% to 100%
Non-condensing

Dimensions:

X:
1/2" thru 4" = 3.50"
5" thru 8" = 5.00"
10" up
= 7.75"

*Refer to table for temperature/pressure/
installation fitting relationships.

High Temperature/Pressure Applications:
Contact factory for pressures up to 1,500 psig and temperatures up to
300°F for stainless steel flow sensors.

TM

Commercial Systems
©2000 Culligan International Co.
1-800-CULLIGAN
www.culligan.com
DCO 992196
Printed in USA 01/00
SL-0064
Moore Part No. 49004

Limited
WARRANTY
Culligan® Hi-Flo® 2 and 2e Series, Hi-Flo® 52 series, Hi-Flo® 42 Series, Hi-Flo® 55e Series,
CSM Series and Hi-Flo® 50 Series
You have just purchased one of the finest water conditioners made. As an expression of our confidence in Culligan
International Company products, this product is warranted to the original end-user, when installed in accordance with
Culligan specifications, against defects in material and workmanship from the date of original installation, as follows:
For a period of ONE YEAR

The entire conditioner.

For a period of TWO YEARS

The control valve internal parts. The brine valve and its component
parts. The salt storage container internal components.

For a period of FIVE YEARS

The
The
The
The

For a period of TWELVE YEARS

The conditioner tank, if it contains a plastic liner.

control valve body, excluding internal parts.
fiberglass wound container(s), if so equipped*.
salt storage container(s), if so equipped.
epoxy-lined steel conditioner tank(s), if so equipped.

* The tank must be protected by a vacuum breaker device as described in the unit's operating manual. Damage to the tank
caused by vacuum is not covered by this warranty. The unit must be used in operating conditions that conform to Culligan's
recommended design guidelines. This warranty will not apply if the unit has been modified, repaired or altered by someone not
authorized by Culligan.
If a part described above is found defective within the specified period, you should notify your independently operated Culligan
dealer and arrange a time during normal business hours for the dealer to inspect the water conditioner on your premises. Any
part found defective within the terms of this warranty will be repaired or replaced by the dealer. You pay only freight from our
factory and local dealer charges.
We are not responsible for damage caused by accident, fire, flood, freezing, Act of God, misuse, misapplication, neglect, oxidizing
agents (such as chlorine, ozone, chloramines and other related components), alteration, installation or operation contrary to our
printed instructions, or by the use of accessories or components which do not meet Culligan specifications, is not covered by this
warranty. Refer to the specifications section in the Installation and Operating manual for application parameters.
Our product performance specifications are furnished with each water conditioning unit. TO THE EXTENT PERMITTED BY
LAW, CULLIGAN DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE; TO THE EXTENT REQUIRED BY LAW, ANY SUCH
IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE ONE-YEAR PERIOD SPECIFIED ABOVE FOR THE ENTIRE
CONDITIONER. As a manufacturer, we do not know the characteristics of your water supply or the purpose for which you are
purchasing this product. The quality of water supplies may vary seasonally or over a period of time, and your water usage rate
may vary as well. Water characteristics can also differ considerably if this product is moved to a new location. For these reasons, we assume no liability for the determination of the proper equipment necessary to meet your requirements, and we do
not authorize others to assume such obligations for us. Further, we assume no liability and extend no warranties, express or
implied, for the use of this product with a nonpotable water source or a water source which does not meet the conditions for
use described in the installation and operation manual(s) that accompany the equipment. OUR OBLIGATIONS UNDER THIS
WARRANTY ARE LIMITED TO THE REPAIR OR REPLACEMENT OF THE FAILED PARTS OF THE WATER CONDITIONER,
AND WE ASSUME NO LIABILITY WHATSOEVER FOR DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL,
GENERAL, OR OTHER DAMAGES.
Some states do not allow the exclusion of implied warranties or limitations on how long an implied warranty lasts, so the above
limitation may not apply to you. Similarly, some states do not allow the exclusion of incidental or consequential damages, so
the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state. Consult your telephone directory for your local independently operated Culligan
dealer, or write Culligan International Company for warranty and service information.

CULLIGAN INTERNATIONAL COMPANY
One Culligan Parkway
Northbrook, Illinois 60062
PN 01016557

Printed in U.S.A.

Hi-Flo 55e
CAD File: Hi-Flo 55e Depth Single.dwg

Hi-Flo 55e
CAD File: Hi-Flo 55e Depth Duplex.dwg

Hi-Flo 55e
CAD File: Hi-Flo 55e Depth Triplex.dwg

Hi-Flo 55e
CAD File: Hi-Flo 55e Depth Quad.dwg

Hi-Flo 55e
CAD File: Hi-Flo 55e Carbon Single.dwg

Hi-Flo 55e
CAD File: Hi-Flo 55e Carbon Duplex.dwg

Hi-Flo 55e
CAD File: Hi-Flo 55e Carbon Triplex.dwg

Hi-Flo 55e
CAD File: Hi-Flo 55e Carbon Quad.dwg

Hi-Flo 55e - Use for Cullsorb Only

CAD File: Filt_HF55.dwg



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Modify Date                     : 2004:02:23 14:49:12-06:00
Create Date                     : 2000:08:07 15:47:07-05:00
Subject                         : Spring 2004
Page Count                      : 19
Has XFA                         : No
Page Mode                       : UseOutlines
Page Layout                     : SinglePage
Mod Date                        : 2004:02:23 14:49:12-06:00
Creation Date                   : 2000:08:07 15:47:07-05:00
Author                          : KSR
Producer                        : Acrobat PDFWriter 3.02 for Windows
Metadata Date                   : 2004:02:23 14:49:12-06:00
Title                           : Hi-Flo 55 Filters
Description                     : Spring 2004
Creator                         : KSR

EXIF Metadata provided by EXIF.tools