Cyber Acoustics 901BT Wireless Speaker Pod User Manual CA 901BT manual Eng greg edit

Cyber Acoustics (HK) Ltd. Wireless Speaker Pod CA 901BT manual Eng greg edit

User manual

Download: Cyber Acoustics 901BT Wireless Speaker Pod User Manual CA 901BT manual Eng greg edit
Mirror Download [FCC.gov]Cyber Acoustics 901BT Wireless Speaker Pod User Manual CA 901BT manual Eng greg edit
Document ID2027101
Application IDPdh+B2QXrPUfi0Bv5hAe8A==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize132.97kB (1662130 bits)
Date Submitted2013-07-28 00:00:00
Date Available2013-07-28 00:00:00
Creation Date2013-07-16 17:18:50
Producing SoftwareAdobe PDF library 10.01
Document Lastmod2013-07-16 17:18:50
Document TitleCA-901BT_manual_Eng(greg-edit)
Document CreatorAdobe Illustrator CS6 (Macintosh)

CA-901BT_manual_Eng(greg-edit).pdf 1 13年7月16日 下午5:18
CA-901BT CM
WIRELESS SPEAKER POD
Congratulations
Your CA-901BT speaker contains Bluetooth® technology, allowing you to wirelessly play music from nearly
any Bluetooth enabled device. Now you can enter the room, select music to play on most smartphones,
tablets, or laptops, and control your listening enjoyment from the comfort of your lap. From your device, you
can easily control and change music tracks, playlists, adjust volume up or down, or even listen to podcasts,
or many other audio applications available on your device.
Box contents
Wireless speaker pod
Cables
Owner’s Guide with connection diagram
Caution
• Read Instructions Carefully – All safety and operating instructions should be read before this device is operated.
• Heat – Keep speakers out of extreme heat and away from sources producing extreme heat, such as, space heaters, radiators, stoves and other devices
emitting heat.
• Water and Moisture – Keep speakers out of the rain and humid conditions to avoid electric shock. Keep speakers away from water, such as, sinks, bathtubs,
swimming pools, washing machines, tubs of water, etc. in order to avoid electric shock. Keep water from dripping on the device, do notput objects
containing water, such as vases on top of the device, and do not put the device near standing water.
• Cleaning – Use a dry cloth for cleaning. Do not wipe any part of the system with cleaning solvents, such as, furniture wax, bleach, benzene, or ammonia.
Speaker connection
Please read the step by step instructions along with the diagrams provided.
Headset
CA-901BT
Not Connected
Connected
:03
3.5mm
(not included)
CM
AUX
MY
CY
CMY
Charging
• Turn off the sample.
• Plug in the included USB charging cable for charging (mini-USB plug to speaker and standard USB plug to USB power source).
• LED will be red while the speaker is charging.
(LED will be purple while the speaker is powered on and charging)
USB cable for charging
Pairing with the speakers the first time
Before you start, please fully charge up the CA-901BT speaker.
Ensure the Bluetooth capability of your source device is turned on and ready to discover new items. If needed, see your device’s instructions to add or setup a Bluetooth
device.
When you first turn on the CA-901BT speaker system, the Bluetooth functionality is not engaged. Below steps are the guidelines for you to connect with CA-901BT speaker.
To wirelessly connect with the Bluetooth function of your speakers:
1. Make sure the speaker is fully charged up. Switch on the device by pressing & holding the Power / Bluetooth button for 3 seconds, or until you hear an audible melody. The
device is now switched on with blue LED light up.
2. Press the Power / Bluetooth button for once to trigger “Bluetooth pairing” mode. You are hear another audible melody and LED will now blink in red and blue alternatively.
3. With your audio source (smartphone, tablet, iPod, etc.), find the Bluetooth device list and look for “CA-901BT.” Select it to pair/connect with the speakers.
4. When the device connects, you will hear a short audible beep, the LED will stop blinking and will turn to a solid “on” state.
5. Now you can go to your music applications; start play and enjoy your music.
Turning off your source device will automatically disconnect your speakers. If you plan on not using your speakers again for an hour or more, we recommend you turn off your
CA-901BT speakers to save battery until you are ready to listen again.
Pairing with the speakers after the first time
Once you’ve successfully paired your speakers, your device will automatically connect with it on successive returns to the room in which they are situated. You will be able to
immediately go the audio application of your choice, select your audio tracks, and begin enjoying almost at once.
Power off the speakers by pressing and holding the Power / Bluetooth button for approximately 3 seconds. It will also disconnect from your source device automatically. Turn
your speakers back on by pressing and holding the same button for 3 seconds (while your device is still Bluetooth enabled), will allow your device to reconnect within a
couple of seconds.
Disconnecting and pairing with a new device
Ensure the speaker is fully charged up. Switch on the device by pressing & holding the Power / Bluetooth button for 3 seconds, or until you hear an audible melody. The
device is now switched on with blue LED lit up.
Repeat step 2 – 5 as with the pairing with the speakers the first time.
Playing Audio via AUX in jack*
1.
2.
3.
4.
5.
Make sure the speaker is fully charged.
Power on the device by pressing and holding the Power / Bluetooth button for about 3 seconds.
Plug in a 3.5mm AUX cable into AUX jack.
Connect another end of the AUX cable with your secondary audio source.
Music will play from the speaker system when you start the playback on the secondary audio source
* AUX input is prioritized (overrides Bluetooth audio source) whenever a 3.5mm cable is plugged in.
CA-901BT_manual_Eng(greg-edit).pdf 2 13年7月16日 下午5:18
Trouble shooting
Symptom
solution
Speaker System Will Not Power On. Make sure the speaker is charged up.
Speaker Does Not Produce Sound. Verify the speaker is getting power. Check above steps.
Verify that all cables and devices are plugged into the correct jacks.
Sound Is Distorted.
Adjust the sound source’s master volume control by balancing the volume until it’s centered.
Trouble shooting Bluetooth connections
Can’t connect for the first time
1. Turn off the speaker completely by pressing and holding the Power / Bluetooth button for about 3 seconds and LED turns off.
2. Check your Bluetooth source device and be sure you have found the section that allows you to see nearby Bluetooth products. If you see the CA-901BT on the list, but
cannot connect, you may need to try and synch again. To start fresh, with your Bluetooth device, select “Forget this device,” to remove the CA-901BT from the list. You
may need to turn off the Bluetooth function on your device to fully clear your list.
3. Turn the speakers back on by pressing and holding the Power / Bluetooth button for about 3 seconds, and go into the “pairing mode” by repeating step 2 – 5 as with
pairing with the speakers the first time.
4. Return to your source device, and re-enable the Bluetooth function. Look for the CA-901BT speakers to show back up on the list.
5. Select these speakers on your screen, and listen for the audible beep to confirm pairing.
Can’t connect when returning
1. If, for some reason, the CA-901BT does not automatically connect back with your Bluetooth-enabled device, you may need to physically go into your device’s Bluetooth
settings and select “CA-901BT” to reconnect.
2. If the above step does not work, see steps 1-5 in the “Can’t connect for the first time” section above.
Audio is choppy, has erratic static, or keeps disconnecting
CM
MY
1. Be sure to check your room environment. Today’s Bluetooth technology has a designed limit of approximately 30 feet, line of sight. This generally means your best results
will be limit your source device and speakers to the same room. Extremely large rooms, or rooms with a lot of wireless electronics, routers, etc, may affect the quality of
sound, connection, or connection consistency.
2. Check for obstructions, walls or other objects that might impede the Bluetooth signal.
3. Try returning to the source device to a closer proximity with your speakers.
Still can’t connect
CY
CMY
1. Be sure to check your room environment. Today’s Bluetooth technology has a designed limit of approximately 30 feet, line of sight. This generally means your best results
will limit your source device and speakers to the same room. Extremely large rooms, or rooms with lots of wireless electronics, wi-fi routers, radio transmitters, etc, may
affect your ability to pair.
2. Check to see if any other devices are already connected to the CA-901BT. The speakers can only pair with one device at a time. If you need to unpair, choose “Forget this
device” from your source. Then follow the setup pairing options as detailed above.
3. Check the battery life of your source device and charge if necessary. Most devices operate best when charged above 20% minimum battery level.
4. Use a sharp pin to press the reset button on the bottom of the CA-901BT speaker. And repeat step 1 – 5 shown in the first time pairing instruction.
Incoming phone calls
When connecting to some Android smartphones (depends on OS version), incoming voice audio may go to this speaker. To ensure you can answer the call through your
phone only, uncheck the “Phone Audio” option of the device name under Bluetooth settings. Or you can switch to phone audio manually, when there is an incoming call.
Additional support
Online...
The latest updated video tutorials, FAQ, and product feature specifications are available online 24/7
In person...
Technical support is also available at 360-883-0333, M-F 8-5 West Coast time.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Format                          : application/pdf
Title                           : CA-901BT_manual_Eng(greg-edit)
Creator Tool                    : Adobe Illustrator CS6 (Macintosh)
Create Date                     : 2013:07:16 17:18:50+08:00
Modify Date                     : 2013:07:16 17:18:50+08:00
Metadata Date                   : 2013:07:16 17:18:50+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 152
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 11789 bytes, use -b option to extract)
Document ID                     : xmp.did:07801174072068118C14F259F70CED69
Instance ID                     : uuid:b9ce305f-69c9-3846-81e3-28239caf4b21
Rendition Class                 : proof:pdf
Original Document ID            : uuid:3E898C13A597E111BB44C9041CE09577
Derived From Instance ID        : xmp.iid:06801174072068118C14F259F70CED69
Derived From Document ID        : xmp.did:06801174072068118C14F259F70CED69
Derived From Original Document ID: uuid:3E898C13A597E111BB44C9041CE09577
Derived From Rendition Class    : default
History Action                  : saved, saved
History Instance ID             : xmp.iid:E3D482C5D2E3E2119C8C9C9294881676, xmp.iid:07801174072068118C14F259F70CED69
History When                    : 2013:07:03 19:21:57+08:00, 2013:07:16 17:18:42+08:00
History Software Agent          : Adobe Illustrator CS5.1, Adobe Illustrator CS6 (Macintosh)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : /Users/Eric/Dropbox/ca global/Manuals/CA-901BT/CA-901BT Camo_garyscale.psd
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : True
Max Page Size W                 : 8.267714
Max Page Size H                 : 11.692912
Max Page Size Unit              : Inches
Font Name                       : ArialMT, AvantGardeITCbyBT-Book, AvantGardeITCbyBT-Demi, AvantGardeITCbyBT-Medium, MyriadPro-Regular, MyriadPro-Semibold, MyriadPro-Bold, Swiss721BT-Medium
Font Family                     : Arial, AvantGarde Bk BT, AvantGarde Bk BT, AvantGarde Md BT, Myriad Pro, Myriad Pro, Myriad Pro, Swis721 Md BT
Font Face                       : Regular, Book, Demi, Medium, Regular, Semibold, Bold, Medium
Font Type                       : Open Type, TrueType, TrueType, TrueType, Open Type, Open Type, Open Type, TrueType
Font Version                    : Version 3.00, mfgpctt-v1.52 Tuesday, January 12, 1993 3:55:26 pm (EST), mfgpctt-v4.4 Dec 14 1998, mfgpctt-v1.53 Friday, January 29, 1993 11:41:07 am (EST), Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, mfgpctt-v1.52 Wednesday, January 27, 1993 10:18:23 am (EST)
Font Composite                  : False, False, False, False, False, False, False, False
Font File Name                  : arial_1.ttf, avgardn.ttf, AVGARDD.TTF, avgardm.ttf, MyriadPro-Regular.otf, MyriadPro-Semibold.otf, MyriadPro-Bold.otf, SWZ721M.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 預設色票群組
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: [Registration]
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Cyan    : 100.000000
Swatch Groups Colorants Magenta : 100.000000
Swatch Groups Colorants Yellow  : 100.000000
Swatch Groups Colorants Black   : 100.000000
Producer                        : Adobe PDF library 10.01
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 16.0
For                             : Eric,
Bounding Box                    : -1318 -64 628 1093
Container Version               : 9
Creator Version                 : 16
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ODL-901BT

Navigation menu