Cyber Acoustics P560 5.1 Speaker System User Manual P560 Manual N

Download:
Mirror Download [FCC.gov]
Document ID	2602252
Application ID	iDBa468n8/mBGlId3rWa+g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	317.24kB (3965515 bits)
Date Submitted	2015-05-01 00:00:00
Date Available	2015-05-01 00:00:00
Creation Date	2015-03-17 17:27:47
Producing Software	Adobe PDF library 9.90
Document Lastmod	2015-03-17 17:27:47
Document Title	P560 Manual N
Document Creator	Adobe Illustrator CS5.1

560
Owner’s Guide
5.1 Speaker System
1
2
3
4
Thank you for purchasing Rockford Fosgate P560 5.1 Powered Speaker System.
We hope it exceeds your expectations in sound quality. The P560 is designed to deliver superior
sound with 5.1 theater quality sound for your movies, games, and music. We offer various methods
of connectivity including Bluetooth, Optical, RCA, AUX, and the latest in gaming sound cards. So
whatever audio player you have (i.e. mobile phone, gaming console, tablet, computer, TV, etc.),
the P560 will be your go to system.
Your system includes:
10
1 5 satellite speakers
2 Subwoofer
560
Owner’s Guide
T-
5.1 Speaker System
3 Control console
4 IR remote
5 12" aux cable
6 5 sets of connection wire (7.6m / 25ft x 2 ; 4.6m / 15ft x 3)
7 3 x 3.5mm cables
8 RCA cable
9 2 x AAA Batteries
10 Owner’s guide with connection diagram
CAUTION
• Do not plug the power supply in until all connections are made.
• Keep speakers away from sources of extreme heat such as stereo amplifiers, space heaters,
stoves, heat vents, etc.
• Do not wipe any part of the system with cleaning solvents such as furniture wax, bleach,
benzene, acetone, or ammonia.
Dolby® Digital
Dolby Digital is the universal standard for 5.1
digital sound. Onboard 5.1 digital decoding
enables detailed surround sound—from the roar
of the crowd to the footsteps right behind you—
in your Dolby Digital soundtracks.
Speaker Preparation
For speaker preparation, we suggest you arrange your system similar to the diagram shown below.
FL
Subwoofer
FR
RL
RR
• Front Satellite Speakers — Place the two front satellite speakers on opposite sides of your
TV or computer monitor. Locate them equal distance from each other and adjust the angle so
the speakers are facing you.
• Rear Satellite Speakers — Place the two rear satellite speakers behind you (with similar distance
apart as the front speakers). Then adjust the angle to face you.
• Center Satellite Speaker — Place the center satellite speaker above or below your TV or
computer monitor (Caution: do not put center satellite directly on top of TV or computer monitor).
• Subwoofer – You can put the subwoofer anywhere in your room. To get the strongest bass, put
your subwoofer near a wall, corner, or underneath a desk. Make sure that nothing is closer than
20cm to the driver or port tube because it will affect the sound. It is important to allow for
enough ventilation around the subwoofer, we recommend 20cm .
• Control Console – Place the console where it is easy to reach and make sure the IR receiver
window is not blocked.
Speaker Connection
CONSOLE
LINE IN
OPTICAL IN
FL / FR
RL / RR
C / SW
FL
FR
RL
RR
AC Power
Subwoofer back panel
1.
2.
3.
4.
5.
6.
Control Console connection port
Red/White (RCA)
Optical in (Digital input)
PC Sound card connections
Satellite output connection ports
AC power cord
Front
Back
BLUETOOTH
INPUT
AUX IN
PC IN
LINE IN
OPTICAL
FL
EFFECT
FR
RL
RR
SUB
10
11
12
DECODE
BASS
3D
2.1
BASS
13
14
POWER
MUTE
Control Console
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Input selection: Use this button to switch between your audio source. (Optical, Line in, PC
in, AUX in, Bluetooth)
Effect: Use this button to switch between 2.1 output or 5.1 output.
Bass: Press this button to adjust bass channel; when the BASS LED is on, you can adjust
bass volume by rotating the knob.
Power: Master power on/off
Mute: Mute the entire system
Volume / level adjustment knob: Adjust master volume
IR remote sensor
Input selection indicator
Speaker output indicator
Decode indicator: LED will be on when Dolby Digital signal is detected.
Sound effect indicator: Either 2.1 output mode or 5.1 output mode.
Bass indicator: When LED is on you can adjust bass level.
Headphone output jack
AUX input jack
IR Remote Control
AAA Battery
1.
2.
3.
4.
5.
6.
Input selection: Use this button to switch between your audio source.
(Optical, Line in, PC in, AUX in, Bluetooth)
Effect: Use this button to switch between 2.1 output or 5.1 output.
Play: During Bluetooth connection, press this button to play or pause. Press and hold for 5
seconds to enter Bluetooth pairing mode.
Master volume: Up/Down
Mute the entire system
Master Power: On/Off
Power On
•
•
AAA Battery
Plug the subwoofer power cable into an electrical outlet.
Press Power on the Control Console to power on the speaker system.
Caution: Make sure all connections are made first.
Audio Input Selection
Bluetooth Input Connection
•
•
•
•
•
Press the “INPUT” button to switch the input until the “BLUETOOTH” LED lights up.
First time pairing; the P560 will automatically go into pairing mode.
Go to your Bluetooth device and select the device named “P560”.
If the system is turned off, it will automatically search for the latest connected device when
turned back on. If the device cannot be found, it will enter into pairing mode.
If you want to pair another new device, you can press and hold the “PLAY” button for 5 seconds
on the IR remote control to trigger the system into pairing mode.
PC Sound Card Input Connection
•
•
There are three 3.5mm input jacks for true 5.1 PC Sound card on the rear panel of the
subwoofer. Please check your sound card manual for the proper connections.
Press the “INPUT” button to switch the input until the “PC IN” LED lights up.
Line In Input Connection
•
•
Making connection with your speaker to any AV system, game console, etc. using the
RCA input on the rear panel of subwoofer.
Press the “INPUT” button to switch the input until the “LINE IN” LED lights up.
Optical Input Connection
•
•
Use an optical cable to connect your device to the optical port on the rear panel of the
subwoofer. (Optical cable is not included)
Press the “INPUT” button to switch the input until the “OPTICAL” LED lights up.
AUX IN Input Connection
•
•
You can connect any laptop, tablet, smartphone, MP3 player, etc. by using a 3.5mm AUX
cable and plugging it into the AUX jack on the rear side of the control console.
Press the “INPUT” button to switch the input until the “AUX IN” LED lights up.
Adjust Volume
Rotate the volume knob to adjust the entire system’s volume. The LED bar will turn into a volume
status bar when you start to rotate the knob. It will resume the display status after adjustments are
made.
Adjust Bass Volume
Press “BASS” button and the “BASS” LED will turn on. The LED bar will turn into bass level status
bar. Adjust the bass volume by rotating the knob. It will resume the display status after adjustments
are made.
10
TROUBLE SHOOTING
SYMPTOM
SOLUTION
Power button is not turned on. Press the power button back and forth
and check for the blue LED indicator light to come on.
Speaker System Will
Not Power
Verify the AC power cord is plugged into the wall outlet.
Check if the wall outlet or power strip you are using is actually getting
power, i.e. not a switched outlet.
Verify the speaker is getting power. Check the steps above.
Speaker Does Not Produce
Sound
Verify that all cables are plugged into the correct jacks or that the
Bluetooth is paired correctly.
Turn the speaker volume down by 25% or 50%.
Sound Is Distorted
Adjust the bass volume control to test for maximum and minimum
output. You may also need to move the subwoofer either closer or
farther away from a wall or corner to affect the sound performance.
Adjust the sound source’s master volume control by balancing the
volume until it’s centered.
BLUETOOTH TROUBLE SHOOTING
Can’t connect for the first time
1. Turn off the speaker system by pressing the POWER button.
2. Check your Bluetooth source device and make sure you have found the section that allows you to see nearby Bluetooth
products. If you see the P560 on the list, but cannot connect, you may need to search again. To start fresh with your
Bluetooth device, select “Forget this device”, and remove the P560 from the list. You may need to turn off the Bluetooth
function on your device to fully clear your list.
3. Turn on the speaker system again by pressing the POWER button and select Bluetooth as input by pressing the INPUT
button until BLUETOOTH LED is on; the LED will be blinking rapidly showing that the speaker system is in pairing mode.
4. Return to your source device, and re-enable the Bluetooth function. Look for the P560 speakers to show back up on the.list.
5. Select the device on the list and the BLUETOOTH LED will become solid if it is connected successfully.
Can’t connect when returning
1. If the P560 does not automatically connect back with your Bluetooth-enabled device, you may need to physically go into
your device’s Bluetooth settings and select “P560” to reconnect.
2. If the above step does not work, see steps 1-5 in the “Can’t connect for the first time” section above.
Audio is choppy, has erratic static, or keeps disconnecting
1. Be sure to check the room environment. Today’s Bluetooth technology has a designed limit of approximately 30 feet, line of
sight. This generally means your best results will be limiting your source device and speakers to the same room. Extremely
large rooms, or rooms with a lot of wireless electronics, routers, etc, may affect the quality of sound, connection, or
connection consistency.
2. Check for obstructions, walls, or other objects that might impede the Bluetooth signal.
3. Try returning to the source device to a closer proximity with your speakers.
Still can’t connect
1. Be sure to check your room environment. Today’s Bluetooth technology has a designed limit of approximately 30 feet, line
of sight. This generally means your best result will be limiting your source device and speakers to the same room. Extremely
large rooms, or rooms with lost of wireless electronics, wi-fi routers, radio transmitters, etc, may affect your ability to pair.
2. Check to see if any other devices are already connected to the P560. The speakers can only pair with one device at a time.
If you need to unpair, choose “Forget this device” from your source. Then follow Bluetooth Input Connections on page #11.
3. Check the battery life on your source device and charge if necessary. Most devices operate best when charged above 20%
minimum battery level.
ADDITIONAL SUPPORT
The latest updated video tutorials, FAQ, and product feature specifications are available online 24/7 at
http://cyberacoustics.com/P560 or Technical support is available at 360-883-0333, M-F 8am to 5pm PST.
11
Performance Specifications
A: Watts: 530W RMS
Satellites – 75W watts/ch x 5 @ 8 ohm – 10% THD
Subwoofer – 155Watts @ 4 ohm – 10% THD
B: Speakers size:
Satellites – 4.3” (W) x 3.7” (D) x 7.0” (H)
Center Satellites – 6.5” (W) x 3.7” (D) x 4.0” (H)
Subwoofer – 11” (W) x 13” (D) x 11.5” (H)
C: Drivers size:
3” dynamic satellite drivers
8” poly-carbon high excursion sub
D: Frequency response: 28Hz – 20KHz
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body
Wall Mounting
You can mount your satellite speakers with the appropriate hardware (not included).
• Do not mount the speakers on thin plywood or on a wall with a soft surface material. The speakers may fall, possibly
damaging the speakers or causing personal injury.
• Do not affix the speakers to a wall using nails, adhesives, or unstable hardware. Long-term use and vibration may cause
the speakers to fall.
• To avoid accidents resulting from tripping over loose speaker cables, affix the cables to the wall and floor.
• Mount the speakers in a wall location that will be less likely to result in injury to an individual’s head or property damage.
Warranty
For warranty information and registration, please go to www.cyberacoustics.com/rockford
12

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Format                          : application/pdf
Title                           : P560 Manual N
Metadata Date                   : 2015:03:17 17:27:47+08:00
Modify Date                     : 2015:03:17 17:27:47+08:00
Create Date                     : 2015:03:17 17:27:47+08:00
Creator Tool                    : Adobe Illustrator CS5.1
Thumbnail Width                 : 192
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 17744 bytes, use -b option to extract)
Instance ID                     : uuid:ee8c99c6-b6bf-6449-9282-6f6bcf1de57c
Document ID                     : xmp.did:14C01DED25206811808386AAE19466E0
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:d6a66b8e-b6fa-264a-898b-fb0cbd040be5
Derived From Document ID        : xmp.did:F87F1174072068118083EA1D66C2C97C
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:F77F1174072068118083A860ED048400, xmp.iid:FA7F1174072068118083A217D1F88493, xmp.iid:FB7F1174072068118083A217D1F88493, xmp.iid:FA7F11740720681197A5EFF0F58DA288, xmp.iid:FB7F11740720681197A5EFF0F58DA288, xmp.iid:FC7F11740720681197A5EFF0F58DA288, xmp.iid:FD7F11740720681197A5EFF0F58DA288, xmp.iid:C51413C34420681197A5EFF0F58DA288, xmp.iid:C61413C34420681197A5EFF0F58DA288, xmp.iid:C71413C34420681197A5EFF0F58DA288, xmp.iid:C81413C34420681197A5EFF0F58DA288, xmp.iid:FC7F1174072068118C14F170FF080909, xmp.iid:FD7F1174072068118C14F170FF080909, xmp.iid:FA7F1174072068118083E849F63421A1, xmp.iid:FB7F1174072068118083E849F63421A1, xmp.iid:F77F1174072068118083E6FD95C0959F, xmp.iid:F97F1174072068118083E6FD95C0959F, xmp.iid:FA7F1174072068118083E6FD95C0959F, xmp.iid:F87F1174072068118083EA1D66C2C97C, xmp.iid:14C01DED25206811808386AAE19466E0
History When                    : 2015:01:19 11:25:09+08:00, 2015:01:26 14:22:39+08:00, 2015:01:26 15:08:20+08:00, 2015:01:27 12:34:22+08:00, 2015:01:27 12:38:32+08:00, 2015:01:27 12:51:48+08:00, 2015:01:27 13:12:10+08:00, 2015:01:27 18:06:52+08:00, 2015:01:27 18:07:19+08:00, 2015:01:27 18:08:32+08:00, 2015:01:27 18:08:47+08:00, 2015:01:28 12:12:46+08:00, 2015:01:28 12:24:50+08:00, 2015:01:29 10:17:51+08:00, 2015:01:29 10:19:33+08:00, 2015:02:03 11:31:31+08:00, 2015:02:03 11:37:22+08:00, 2015:02:03 11:46:41+08:00, 2015:02:06 11:20:50+08:00, 2015:03:17 17:27:34+08:00
History Software Agent          : Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1
History Changed                 : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : T560-Jan27-02.jpg
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 142.998507
Max Page Size H                 : 189.999083
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, HelveticaNeue-Light, HelveticaNeueLTPro-Bd, HelveticaNeueLTStd-Roman, HelveticaNeueLTStd-Md, HelveticaNeueLTStd-Bd, MyriadPro-Regular, MyriadPro-Bold, AdobeMingStd-Light
Font Family                     : Arial, Arial, Helvetica Neue, Helvetica Neue LT Pro, Helvetica Neue LT Std, Helvetica Neue LT Std, Helvetica Neue LT Std, Myriad Pro, Myriad Pro, Adobe 明體 Std
Font Face                       : Regular, Bold, Light, 75 Bold, 55 Roman, 65 Medium, 75 Bold, Regular, Bold, L
Font Type                       : Open Type, Open Type, TrueType, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 5.01.2x, Version 5.01.2x, 10.0d36e1, Version 1.500;PS 001.005;hotconv 1.0.38, Version 1.047;PS 001.103;Core 1.0.38;makeotf.lib1.6.5960, OTF 1.029;PS 001.002;Core 1.0.33;makeotf.lib1.4.1585, OTF 1.029;PS 001.102;Core 1.0.33;makeotf.lib1.4.1585, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, Version 5.003;PS 5;hotconv 1.0.49;makeotf.lib2.0.14802
Font Composite                  : False, False, False, False, False, False, False, False, False, False
Font File Name                  : Arial.ttf, Arial Bold.ttf, HelveticaNeue.dfont, HelveticaNeueLTPro-Bd.otf, HelveticaNeueLTStd-Roman.otf, HelveticaNeueLTStd-Md.otf, HelveticaNeueLTStd-Bd.otf, MyriadPro-Regular.otf, MyriadPro-Bold.otf, AdobeMingStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : Brights
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000004
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 9.90
Page Count                      : 13
Creator                         : Adobe Illustrator CS5.1

EXIF Metadata provided by EXIF.tools