Cyber Blue BTOES BToes 2.1 EDR Micro Dongle User Manual

Cyber Blue (HK) Limited BToes 2.1 EDR Micro Dongle Users Manual

User Manual

BLUETOOTH DONGLE Specification: Bluetooth Standard Bluetooth 2.1＋EDR Solution CSR ：BC0401PC08 Host Interface USB 1.1 Compliance USB 2.0 Compatibility Frequency band 2.4G ISM band Spectrum FHSS Modulation GFSK，π/4 DQPSK，8DPSK Antenna PCB antenna Sensitivity -80dBm typical RF Specification power Class2, 4dBm Topology Piconet / Scatter net Link mode ACL, SCO, Data Rate 3M bps Operating Distance 10 meters LED Indication Power on, Standby, OS Windows 2000/XP/Vista/ 7 Software Ivt,tosshiba Power Supply 5V USB power Support Profile Serial Port / Object Push File Transfer LAN Access Personal Area Network Audio Geteway / Heatset HID / Keyboard, Mouse HCRP(Printer Cable Replacement) PIM Synchronization Profile, Advanced Audio Distribution Profile(A2DP), Audio Video Remote Control Profile(AVRCP) Current Consumption 20mA Active Model Dimension (PCBA) 11.8(L) mm * 11.5mm (W) Dimension (Product) 13(L) *14.5 (W) *6mm(H) Certification Electrical Characteristics: Electrical Characteristics Min Typ Max Unit TX mode current 40 mA RX mode current 15 mA Standby mode current 1.8 mA RF/Frequency Range 2.402 2.480 GHZ
RF/ Transmitter power -3 0 4 dBm RF/Initial carrier -75 75 KHZ RF/Single slot sensitivity BER 80 dbm Transmission speed of 10 meters 100 KB/S Operating Temperature -10 60 ℃ Storage Temperature -25 80 ℃ Operating humidity 75 % Storage humidity 85 % FCC Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Tested to comply with FCC standard. FOR HOME OR OFFICE USE. Warning : This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. & This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.

Navigation menu