CyberBank CB-2460 PDA User Manual Majesty contents

Download:
Mirror Download [FCC.gov]
Document ID	283200
Application ID	OFC4ZEumSudo3SjKXSiHQA==
Document Description	users manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	154.12kB (1926542 bits)
Date Submitted	2002-11-12 00:00:00
Date Available	2002-11-11 00:00:00
Creation Date	2002-11-11 14:23:38
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2002-11-11 14:23:53
Document Title	Microsoft Word - Majesty_contents.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	swkim

3. If you want to add this page to a new folder other than Favorite, tap New Folder.
4. Tap New Folder and enter a new name for a new folder. Then tap OK.
3)
Managing your Favorites folder
Tap Manage Favorites on the Favorites menu.
You can add, rename, move and delete folder.
4)
Web Page Offline
By tapping Work Offline on the File menu, you can see the last Web page you connected
to while you were online. This Web page does not show you the updated Web sites since
the last connection.
If you select Work Offline, Internet Explorer will always start in the offline mode. To
run Internet Explorer in an online state, tap Work Offline on the File menu once
more.
Internet Explorer & Inbox
Page 5-3
II. Inbox
You can send and receive mail messages as follows:
ActiveSync folder that helps you to synchronize data between your desktop and
device.
Mail service account that you can make for directly connecting to ISP’s network.
You can download mail messages using this mail service account through LAN
card that you have to purchase optionally.
(1) Mail message Synchronization through ActiveSync
1)
Microsoft ActiveSync Settings for Inbox
Tap Inbox ( ) icon.
First, put your device on cradle and synchronize mail message through Microsoft
ActiveSync. At this time, select Inbox in establishing a partnership.
Page 5-4
Chapter 5
Select Inbox and tap the Settings button.
Tap OK and synchronize mail messages between desktop and the ActiveSync folder of
your device.
: Mail message with no attachments,
2)
: Mail message with attachments.
Open mail message in Inbox
Double-tap mail message you want to open.
If you want to reply to, reply all, forward and delete this mail message, tap the reply to
), reply all (
Internet Explorer & Inbox
), forward (
) and delete (
) icon.
Page 5-5
3)
Make a new mail message
If you want to make a new mail message, tap New from the Compose menu or tap the
New Message (
) icon.
Enter Recipient, Cc, Title and content.
Recipients
Enter the recipient’ s mail address directly or tap the Contacts (
) icon to
select the mail address from the list.(for more information, see the Add mail
address to Contacts.)
If recipients is more than 2 persons, semicolon(;) will be put between mail
address.
If you want to attach files, select the File menu, point to Attachments and Add
Attachments or tap the Add Attachments ( ) button. The attachments will be shown on
the bottom of screen.
Tap the Send (
) button to send your mail message.
If you want to leave the copy of the mail message you have sent before, select the
Service menu, Options, the Compose tab and select the Save copy to Outbox.
4)
Add mail address to Contacts
Open the mail message of the Inbox folder and select the Add mail address to
Contacts from the Compose menu.
Page 5-6
Chapter 5
Select the Add to mail address to e-mail client of the Tools menu of the Contacts
program.
Select a contact you want or select the Select All button to select all contacts and tap OK.
5)
Make a new folder, rename and delete folder
1. Select the folder under which you want to make a new folder on the explorer pane
located on the left side.
2. Select the File menu, Folder and New Folder, and enter a name of a folder and tap
OK.
3. If you want to rename it, select a folder and point to Folder of the File menu and
select Rename. Then enter a new name.
You can not rename the Inbox, Sent, Outbox, Deleted folder provided from the
ActiveSync folder.
4. Select the folder you want to delete, point to Folder of the File menu and select.
You can not delete the Inbox, Sent, Outbox, Deleted folder provided from the
ActiveSync folder.
6)
Move mail messages
Allow you to move mail messages in a folder to another folder.
1. Select a mail message to move. (When you select more than one message, tap shift
first and select another message.)
2. Select Move to of the File menu.
Internet Explorer & Inbox
Page 5-7
3. Select the folder you want to move mail messages and tap OK.
(2) Making a new Local Account
Select the Inbox icon on your device.
For more detailed information on POP3/IMAP4 server name, SMTP Host name,
user name and password, ask your ISP or network administrator.
Some mail services restrict sending/receiving mail messages through a network
outside according to company security policies, or do not support POP3 for some
Web-based mail messages. First, ask your ISP or network administrator.
Select Options of the Service menu and tap Add button.
Select IMAP4 or POP3 and tap OK. (For more detailed information, ask your ISP or
network administrator. Let us take a POP3 example here.)
Example: *****.cb.co.kr
SMTP Host name
Example: Steve
Remember your password
and select this option.
Fill out each corresponding item and tap Next.
Select options you need and tap Next.
Page 5-8
Chapter 5
When completed, tap Finish.
Tap OK to finish all settings.
Insert the wireless or wired LAN card (you have to purchase it optionally.) into CF card slot and see
the corresponding icon on the taskbar. (Wired LAN card:
Tap the connect (
, wireless LAN card:
) icon to download the Inbox folder of the Local Folder from mail
server.
You can add new folders under only the Inbox, Sent and Outbox of the Local
Folder you have created.
1)
Open mail message
1. Tap the Connect (
) button or Send/Receive (
) button to make a connection to
mail server.
2. Mail messages will be downloaded to the Inbox folder of your Local Folder from mail
server.
The Sent, Outbox and Deleted folder of your Local Folder will not be downloaded
from mail server.
Internet Explorer & Inbox
Page 5-9
3. When finished, tap the Connect (
) button again to disconnect.
4. Double-tap the mail message or select Open of the File menu.
For more detailed information on the Local Folder, see mail message
synchronization of the ActiveSync folder in the first half of this chapter.
Page 5-10
Chapter 5
CHAPTER 6
Microsoft Programs
I.
Media Player
Use Microsoft Windows Media Player to listen to digital audio and video files, such as
songs or movie clips. Media Player supports sound file recorded in Windows Media and
MP3 formats.
To turn off the display so that you can save power(the LCD-Off mode), press
and hold down(2 or 3 seconds) the power button while listening to music on your
device. Press the power button again to turn on the display. The Recording and
Alarm Status LED will flash.
1. Play button
2. Stop button
3. Previous track
4. Next track
5. Mute button
6. Volume slider
7. Progress slider
①
③
②
⑦
⑤
④
⑥
To start Windows Media Player
1.
Copy Windows Media files you want to the My Documents folder using Microsoft
ActiveSync. (Also you can use CF or SD card.)
2.
Microsoft Programs
Select Open of the File menu.
Page 6-1
3.
Select the Browse button to find files you want.
Upper folder
Simple
Detail
New folder
4.
Select the file you want and tap OK.
5.
Tap OK again.
Make a Playlist
Page 6-2
1.
Select Playlists of the File menu.
2.
Select Organize Playlists of the Local Content menu.
3.
Tap the New button to make a new playlist and tap OK.
Chapter 6
4.
Select the files you want and tap OK.
Properties
Play
Add
Delete
Move up/down
To make the Favorites
When you want the current music added to the Favorites, point to Favorites of the File
menu and select Add to Favorites.
Added music files
If you want to organize Favorites easily, point to Favorites of the File menu and select
Organize Favorites.
Add button
Select the Add button to add new music to Favorites.
Microsoft Programs
Page 6-3
Select the music you want and tap OK.
Set up Options
Select Options of the View menu.
The same with selecting Repeat of the
Playback menu.
Page 6-4
Chapter 6
II. MSN Messenger
MSN Messenger is an instant messaging program that lets you see who is online, send
and receive instant messages and have instant message conversations with groups of
contacts.
Insert the wireless or wired LAN card (you have to purchase it optionally.) into CF card slot and check
the corresponding icon on the taskbar. (Wired LAN card:
select the MSN Messenger (
, wireless LAN card:
) After that,
) icon.
Also you need an account from your ISP. In addition, you must have a Microsoft Passport
account or a Microsoft Exchange e-mail account. You must have a Passport to use MSN
Messenger Service. If you have a Hotmail® or MSN account, you already have a Passport.
Once you have obtained either a Microsoft Passport or a Microsoft Exchange account,
you are ready to set up your account.
Sign up for a Microsoft Passport account at http://www.passport.com. Get a free
Microsoft Hotmail e-mail address at http://www.hotmail.com.
(1) To set up an account and sign in
1.
Select the MSN Messenger icon. When you use this program for the first time.
Select the next button.
Select the next button.
Microsoft Programs
Page 6-5
If you don’t have any
www.passport.com currently, select
the Register Passport account.
Select the next button.
Enter the address of
www.passport.com
or www.hotmail.com.
Enter password.
Select the next button.
Select the Finish button.
2.
When you finish setting up an account, it automatically signs in.
Select the OK button.
Page 6-6
Chapter 6
3. Tap OK to have the next screen displayed.
This is a messenger name
used in your desktop.
These are the users that are on line currently.
4.
If you want to change the existing messenger nickname used on your desktop, select
Nickname (Online) displayed on your screen. Select Personal settings from a popup menu or select Options of the Tools menu.
Enter the messenger nickname.
(2) To use MSN Messenger
1.
When you want to communicate with someone online on your Messenger screen,
double-tap the nickname you want to communicate with or select the nickname from
Send Instant Messenger.
Select the Chat button to
have the right side of screen
displayed.
Enter the instant message
and tap the Send button.
Microsoft Programs
Enter the voice chat message.
Page 6-7
2.
Enter the instant message and tap the Send button. Then your party will see your
message.
(3) Change your status
Select Status of the File menu.
(Online/Busy/Be right back/Away/On the phone/Out to lunch/Appear Offline)
The list of your status appears on your device and your party’s device.
This is the screen displayed on my device when my party selects the On
the Phone status of the File menu.
(4) Set up Options
Select Options of the Tools menu.
Enter the messenger nickname.
Tap this button to block your
parties that are used to
communicate with you.
Page 6-8
Chapter 6
It is recommended that you
select .NET passport account.
Microsoft Programs
Page 6-9
III. Remote Desktop Connection
Using Remote Desktop Connection, first log in the Windows Terminal Server and you can
use all programs that are installed on your server. (Windows 2000 version or later should
be installed on your server.) For example, you can use the Window Word program instead
of Microsoft WordPad.
Insert the wireless or wired LAN card (you have to purchase it optionally.) into CF card slot and check
the corresponding icon on the taskbar. (Wired LAN card:
select the Remote Desktop Connection (
, wireless LAN card:
) After that,
) icon.
Enter
user’s
server
name or IP address.
Enter user’s server name or IP address. To set up preference, select the
options button.
Enter user
password.
name
and
Select the Connect button to automatically connect to server.
Enter user password.
Page 6-10
Chapter 6
Enter password again and tap OK. Then it automatically connects to server.
To close your task in your server, tap the Start button and select Exit system.
It is recommended that
you select Log Off. If
you select System off,
your server will be
shut down.
Microsoft Programs
Page 6-11
IV. Terminal Emulator
Let’s take an example of connection to network terminal using wired modem. (For more
detailed information on settings, ask your ISP administrator.)
Insert the wired LAN card (you have to purchase it optionally.) into CF card slot and check the
corresponding icon on the taskbar. (Modem card icon:
) After that, connect outlet of your
phone to wired modem card.
Select the Start button > Point to Programs > Point to Communications > select Terminal,
and double-tap the Make a new Session ( ) icon.
Select
card.
modem
Select
emulation
you
depending
ISP.
the
type
want
on
For more detailed settings, select the Configure button.
Select
the
fastest
modem speed available.
Tap OK and it will try to connect automatically to your ISP network.
Page 6-12
Chapter 6
V. Word Viewer
Word Viewer allows you to view Microsoft Word file without any change of extension name.
When you copy Word files of desktop to your device through Microsoft ActiveSync, the
extension name of each Word file will be changed to another name you don’t want. This
Word Viewer supports the same extension (extension name: doc, rtf) name with your
desktop, so you don’t need automatically to change extension name.
This is how you change the setting of Microsoft ActiveSync.
Select the Options button.
Select Conversion Settings.
Deselect this option box not to
convert the file extension name
when copied between desktop
and your device. However,
select the Device to Desktop tab
or the Desktop to Device tab to
adjust the extension name to
another you want.
For more information on this conversion settings, see chapter 4 “Install
Microsoft ActiveSync & Establish a partnership”.
To start Word Viewer
1.
Copy Word files to the My Documents folder through Microsoft ActiveSync. (Also you
can use CF & SD memory card.)
2.
Open the Word Viewer program.
3.
Select Open of the File menu.
Microsoft Programs
Page 6-13
New folder
Upper folder
Page 6-14
Simple
Detail
4.
Select a file you want and tap OK.
5.
Select Zoom of the View menu to see more detailed file.
Chapter 6
VI. Excel Viewer
Excel Viewer allows you to view Microsoft Excel file without any change of extension name.
When you copy Excel files of desktop to your device through Microsoft ActiveSync, the
extension name of each Excel file will be changed to another name you don’t want. This
Excel Viewer supports the same extension (extension name: .xl*) name with your desktop,
so you don’t need automatically to change extension name.
This is how you change the setting of Microsoft ActiveSync.
Select the Options button.
Select Conversion Settings.
Deselect this option box not to
convert the file extension name
when copied between desktop
and your device. However,
select the Device to Desktop tab
or the Desktop to Device tab to
adjust the extension name to
another you want.
For more information on this conversion settings, see chapter 4 “Install
Microsoft ActiveSync & Establish a partnership”.
To start Excel Viewer
1.
Copy Excel files to the My Documents folder through Microsoft ActiveSync. (Also you
can use CF & SD memory card.)
2.
Microsoft Programs
Open the Excel Viewer program.
Page 6-15
3.
Select Open of the File menu.
New folder
Upper folder
4.
Simple
Detail
Select a file you want and tap OK.
Select a Sheet you want to open.
5.
Page 6-16
Select Zoom of the View menu to see more detailed file.
Chapter 6
6.
Select Split of the View menu to divide your Excel file.
7.
Select Remove Split of the View menu not to divide your Excel file.
Microsoft Programs
Page 6-17
VII.PowerPoint Viewer
PowerPoint Viewer allows you to view Microsoft PowerPoint file without any change of
extension name. When you copy PowerPoint files of desktop to your device through
Microsoft ActiveSync, the extension name of each PowerPoint file will be changed to
another name you don’t want. This PowerPoint Viewer supports the same extension
(extension name: PPT & PPS) name with your desktop, so you don’t need automatically
to change extension name.
This is how you change the setting of Microsoft ActiveSync.
Select the Options button.
Select Conversion Settings.
Deselect this option box not to
convert the file extension name
when copied between desktop
and your device. However,
select the Device to Desktop tab
or the Desktop to Device tab to
adjust the extension name to
another you want.
For more information on this conversion settings, see chapter 4 “Install
Microsoft ActiveSync & Establish a partnership”.
To start PowerPoint Viewer
1.
Copy PowerPoint files to the My Documents folder through Microsoft ActiveSync.
(Also you can use CF & SD memory card.)
2.
Page 6-18
Open the PowerPoint Viewer program.
Chapter 6
3.
Select Open of the File menu.
New Folder
Upper folder
Simple
Detail
Select a file you want to open.
4.
Select a file you want in the list.
Move up/down
the selected file
5.
Normal view
Slide sort view
Slide Show view
Select the Slide sort view icon.
Slide sort view
Microsoft Programs
Page 6-19
6.
Select the Slide Show (
) icon and tap Water Mark to have a pop-up menu
displayed.
Tap here to
move to the
previous or
next page.
Tap here to move
to a page you
want.
Water Mark
Tap Pointer to
have an arrow
displayed.
Tap here to change
pen color.
To set up the Slide Show preference
Select Set Up Show of the Slide Show menu.
To set up preferences
Select Preferences of the Slide Show menu.
Select
landscape
portrait.
Page 6-20
or
Chapter 6
VIII. Image Viewer
The Image Viewer application enables you to view image files stored on your device. You
can view images in BMP, 2BP, GIF and PNG formats.
To start Image Viewer
1.
Copy images to the My documents folder on your device using Microsoft ActiveSync
or SD and CF card.
2.
Open the Image Viewer program.
3.
Select Lock In of the File menu.
4.
Select the folder where images are stored and tap OK.
View full screen
Up/down icon
Set up Slide show
Slide Show
File Information
To set up Slide Show
Select the Set up Slide Show (
Microsoft Programs
) icon or select Set up show of the Slide Show menu.
Page 6-21
Up/down
buttons
When you clear the
option box of a file,
the file will not be
displayed during Slide
Show.
The interval during
automatic Advance
Rotate.
Zoom
To start Slide Show
1.
Select View Show of the Slide Show menu.
2.
View Show.
Manual: tap screen when you want to move to next page.
Automatic: automatically move to next page after the preset interval in the
Slide show preference.
Automatic (Repeat): automatically move to next page after the preset interval in
the Slide show preference and when it arrives at the last page, it goes back to
the first page.
3.
Water Mark
On the pop-up menu that is displayed through tapping Water Mark, you can select
Next or Previous page and close slide show.
Page 6-22
Chapter 6
Rotate and Zoom
Select a specific file you want to rotate and select the View full screen
) button or select View Full Screen of the View menu.
Water Mark
Select the Water Mark to display the pop-up menu that has Rotate, Zoom.
To save a file of the Slide Show Settings
To save the preference file of slide show (extension name: wss), Select Save Show
Settings As of the File menu.
Select the folder you
want to save the slide
show preference file
at.
Enter the name of the Extension name of the
slide show preference
Slide show preference.
Microsoft Programs
Page 6-23
IX. PDF Viewer
The PDF Viewer enables you to open the PDF files. The extension name should be PDF.
You cannot open the PDF file that includes Korean fonts.
To start the PDF Viewer
1.
Copy PDF files to the My documents folder on your device using Microsoft
ActiveSync or SD and CF card.
2.
Open the PDF Viewer program.
3.
Select Open of the File menu.
New folder
Upper folder
4.
Page 6-24
Simple
Detail
Select the PDF file you want and tap OK.
Chapter 6
CHAPTER 7
The 3rd party programs
Errors may occur when you use more than 1,500 items in Calendar, Tasks and
Contacts.
Majesty provides you with programs including Calendar, Tasks, Contacts and Inbox
for your convenience. You can synchronise data in Calendar, Tasks, Contacts and
Inbox with data of your desktop using Microsoft ActiveSync.
I.
Contacts
“Contacts” is a program that manages personal information, phone numbers, address, and more.
You can use data in Contacts to search Web pages, send mail messages. Contacts is the application
in which you store name and address information about people or businesses.
The 3rd party programs
Page 7-1
(1) Creating a New Contact
1.
Tap the New(
) button or tap New Contact on the File menu.
Select this to add this contact
information to mail address of Inbox
2.
Enter data in the relevant spaces.
3.
If necessary, you can enter data under the Category tabs.
4.
Tap OK to save, or if you wish to go on without saving, tap Cancel.
Select this to
classify contacts
by category.
When creating a contact other than the one you are currently working on, tap the
“ Save and Continue” button instead of tapping “ OK” .
(2) Editing a contact
1.
After selecting the contact you wish to edit, tap the Modify (
) button or tap
Edit Contact on the Edit menu, or double-click the selected contact.
2.
If necessary, you can enter data under each tab.
3.
For more information, see “Creating a New Contact”.
(3) Deleting a Contact 연락처 삭제하기
Page 7-2
1.
Select the contact you wish to delete on the contacts list.
2.
Tap the Delete(
) button or tap Delete on the Edit menu.
Chapter 7
(4) Displaying by Category
You can display and see contacts by the category you assigned to the contact.
1.
If you tap the All Category (
) button, the registered categories appear.
As the number of categories that can be displayed is limited, all categories may not
be displayed.
2.
Select the desired category, and only those contacts having that category will be
displayed on the contacts list.
3.
Select Category Filter of the All Category button to select more than 2 categories on
the Category Filter screen.
(5) Editing the category list
1.
Tap the All Category (
) button.
2.
Select .
3.
Enter a new category name and tap Add to enter the new category you wish in the
New Category box.
4.
Select from the category list the category to be deleted, tap Delete.
5.
However, tap Reset to return to the default setting of preset categories.
(6) Sending mail messages using contacts
1.
Select the contact to which you wish to send mail messages.
2.
Tap Send Mail on the Tools menu or tap the Mail (
) button to have mail message
screen opened.
The 3rd party programs
Page 7-3
(7) Using the Web browser of contacts
1.
Select the contact with the Web site you wish to visit.
2.
Tap Explore Web page on the Tools menu or tap the Web page ( ) button to have
the Web browser screen displayed.
(8) Adjusting Font Size
Select Font Size on the View menu or tap the Font Size (
) button and select the desired
font size.
(9) Set up the columns displayed on the screen
1.
Select Customize Columns of the Tools menu.
2.
Select items you want to display on the left pane and tap Add.
3.
If you want to change the order of columns, select items on the right pane and tap
the Up or Down button.
4.
If you want to delete any column, select item on the right pane and tap the Delete
button.
(10) Sending and Bring in Contacts & My Name Card
1.
Page 7-4
Select Export and Import on the File menu.
Chapter 7
2.
Select the file type to send and tap OK. (Let us take an example of Sending out a
Contact file.)
3.
Select an item you want and tap OK.
New Folder
Upper folder
4.
Simple
Detailed
Select a Contact file you want to send out and tap OK.
The 3rd party programs
Page 7-5
II.
Calendar
(1) All day Events
The All day Events screen divides the day into time slots and displays events by the time
slots. Tap “Day” on the View menu, or tap the All day Events (
) button.
(2) Weekly Events
The Weekly Events screen divides a week by days and displays events happening
throughout the week. Tap “Week” on the View menu, or tap the Weekly Events(
button
Page 7-6
Chapter 7
(3) Monthly Events
The Monthly Events screen divides the month by days and displays events happening
throughout the month. Tap “Month” on the View menu, or tap the Monthly Events (
button.
(4) Yearly Events
The yearly events screen divides the year by months and displays the dates with events in
Blue. Tap “Year” on the View menu, or tap the Yearly Events(
The 3rd party programs
) button.
Page 7-7
(5) Agenda
The Agenda screen lists the event of a particular day. Tap “Agenda” on the View menu,
or tap the Agenda(
) button.
(6) Making a New Appointment
Page 7-8
1.
Tap New Appointment on the File menu, or tap the New Appointment (
) button.
2.
Enter data in the Subject and Location box. (An appointment must have a subject.)
3.
Select the appointment date and time you want.
4.
If you need to set recurrences, tap Recurrence.
Chapter 7
5.
After finished, tap OK. Then, it will look a little different than when you first saw it, as
shown below.
Select this to keep your
appointment secret
Select this to set up
alarm
6.
When you need to select or edit a category, tap the Category tab and select
Categories you want.
Select here to edit
Category.
7.
Tap OK to save settings. If you wish to close without saving data, tap Cancel.
(7) Making a new all day event
Tap New All Day Event on the File menu. The Calendar dialog box appears. This display
is a little bit different from the New Appointment dialog box : the Allday Event box is
already checked.
For more information, see “Creating a New Appointment
(8) Editing an Appointment
Double-tap the appointment you wish to edit, or select the appointment you wish to edit
and tap Edit Item on the Edit menu. For more information, see “Creating a New
Appointment.
The 3rd party programs
Page 7-9
(9) Deleting an appointment
After selecting the appointment you wish to delete, tap Delete Item on the Edit menu.
(10) Finding Appointments and Tasks
Tap Find on the Tool menu, or tap the Find(
) button.
Enter the data needed to search for in the given box next to Find, and select the type from
Type if needed. Tap Search.
(11) Editing Customize Column
Select Customize Columns of the Tools menu on the Agenda screen.
The column list that
can be added on
the Agenda screen
The column list that
can be displayed
(12) Set up Options
Select Options of the Tools menu.
A start day of a week.
Tap here to listen to alarm sound.
Tap here to set up holidays.
Tap Holidays to set up holidays.
Page 7-10
Chapter 7
(13) Display by Category
You can display and see appointments by the category you assigned to the appointments.
1. If you tap the All Category (
) button, the registered categories appear.
As the number of categories that can be displayed is limited, all categories may not
be displayed.
2. Select the desired category, and only those appointments having that category will be
displayed on the appointments list.
3. Select Category Filter of the All Category button to select more than 2 categories on the
Category Filter screen.
The 3rd party programs
Page 7-11
III.
Tasks
(1) Creating a New Task
Tap New Task on the File menu or tap the New Task (
) button
Enter desired data in the Subject boxes. (A task must have a Subject.)
Check to see if the date and frequency of the task are correct; if they are not, select the
desired date and time by tapping the arrow on the right side of each item.
Then, it will look a little different than when you first saw it, as shown below.
Page 7-12
Chapter 7
If you need to set recurrences, tap Recurrence.
When you are finished, tap OK. Then, when you return to the Tasks dialog box, it will look
a little different than when you first saw it, as show below.
Tap the Category tab to select categories.
If you have more detailed information, tap the Memo tab.
You can enter up to 264 characters.
(2) Editing a task
Double-tap the task you wish to edit, or select the task you wish to edit and tap Edit Task
on the Edit menu. For more information, see “Creating a New Task”
(3) Deleting a task
After selecting the task you wish to delete, tap Delete Task on the Edit menu or tap the
Delete (
) button, and the selected item is deleted.
(4) Deleting completed tasks
To delete completed tasks, tap Delete Completed Task on the Edit menu and all
completed tasks are erased.
The 3rd party programs
Page 7-13
(5) Finding tasks
You can use this feature to find a specific task.
Tap Find on the Tools menu, or tap the Find (
) button.
(6) Editing Customize Column
Select Customize Column of the Tools menu.
The column list that is
displayed on the
Tasks screen
(7) Display by Category
You can display and see tasks by the category you assigned to the tasks.
1. If you tap the All Category (
) button, the registered categories appear.
As the number of categories that can be displayed is limited, all categories may not
be displayed.
2. Select the desired category, and only those tasks having that category will be displayed
on the tasks list.
3. Select Category Filter of the All Category button to select more than 2 categories on the
Category Filter screen.
Page 7-14
Chapter 7
IV.
Memo
The Memo program allows you to save contents that you have handwritten using the stylus
and also allows you to add text message, alarm and voice recording. The number of
memos that can be stored will vary depending on the memory. Each memo can contain
up to 4,000 characters.
(1) Creating a New Memo
Tap New on the File menu, or tap the New Memo ( ) button.
Add next page
Save
Open
New Memo
Text Mode
Recorder
Draw Mode
Set Alarm
Enter the contents you want using the stylus.
If you want to enter text message, select the Text Mode ( ) button.
If you want to add a new page, tap the Add next page ( ) button.
Tap Save on the File menu or tap the Save ( ) button to save the Memo (memo file’s
extension name is .cmo).
(2) Opening an existing Memo
Tap Open on the File menu or tap the Open ( ) button.
New Folder
Upper folder
Simple
Detailed
Select the folder that holds the file you wish to open and double-tap the file.
The 3rd party programs
Page 7-15
(3) Saving a Memo as JPG file
A Memo file, saved as CMO file, can be opened on other programs by saving it as
JPG file.
1.
Enter content you want.
2.
Select Save Current Page as JPG or Save All Pages as JPG on the File menu.
3.
Select the folder where you want to save your file and tap OK.
(4) Selecting Pen or Eraser and setting Preferences
Select Pen or Eraser on the Tools menu or select the Pen ( ) or Eraser ( ) button.
In order to set up Preferences for Pen or Eraser, select Pen weight, Pen Color or
Eraser Weight on the Tools menu.
(5) Using Text Mode
1. Select Text Mode on the Edit menu or tap the Text Mode ( ) button.
2. Enter content you want from the DioPen screen appearing automatically.
Text will be entered only in black.
Text is entered separately by page, which means that pages are not connected
between continuous pages.
Text appears above drawing content, if both modes co-exist.
(6) Setting up Alarm
1.
Select Alarm Setting on the Tools menu or tap the Alarm Setting (
2.
If you didn’t save this file before, you will see the Save dialog.
3.
If you tap Yes, you will see the Save As dialog box.
New Folder
Upper folder
Page 7-16
) button.
Simple
Detailed
Chapter 7
4.
Select the folder where you want to save your file and tap OK.
5.
Select an alarm time you want and tap the Setting button.
Once an alarm is set, the alarm sound rings even though the Memo program is
closed or your device is in the Sleep Mode.
(7) Voice Recording
1. Select Recorder on the Tools menu or tap the Recorder ( ) button.
Select recording
Delete
Process slider
Recording Stop
Play
2. Tap the Recording button to start recording.
The maximum of 9 recordings in one memo file can be added and are supposed
to be as simple as possible.
(8) Setting up Preference
Select Options on the Tools menu.
Tap here to listen to sound file
that is selected.
Select here to select another sound file.
Sampling Rate
Sensitivity Slider
The 3rd party programs
Page 7-17
V.
Calculator
Calculator includes three operating modes: Standard, Scientific and Convertible. In
Standard mode you can perform simple mathematical calculations. In Scientific mode you
can access scientific functions and perform sophisticated math calculations.
Standard Calculator: Select Standard on the calculator menu.
Keep on top
Enter data
Result
In order to keep the calculator displayed on top of all other programs, tap Top. To
cancel this function, tap Hide.
C : Clears all data (upper black box) you entered for calculation.
CE : Clears the result of calculation (lower black box).
Scientific Calculator: Select Scientific on the calculator menu.
Enter data
Result
This program supports up to 15-digit numbers.
Page 7-18
Chapter 7
Convertible Calculator: Select Convertible on the calculator menu.
Enter data
Result
1.
First, select the weight or measure you want to convert (Length, Weight, Volume, Size,
Temperature).
2.
Select the unit to convert and the unit to convert into. When you select a unit, it is
displayed in the windows above the lists and next to the From and To panes.
3.
Enter a number to convert and tap =.
The 3rd party programs
Page 7-19
VI.
Recorder
Recorder allows you to record simple sounds or to play back existing Wave files.
Open File
Save File
Recording Settings
Record
Play
Stop
Pause
(1) Recording
Tap the Record button on the bottom of the Record screen or press the Record button on
the right side of your device when the recorder program is open.
To stop recording, tap the Stop button on the bottom of the Recorder or press the record
button on the right side of your device.
(2) Saving recorded file as another name
1. Tap SAVE after you have completed recording.
2. Select a folder where you want to save this file and enter the file name in the file name
input box.
3. Tap OK. However, if you do not want to save, tap X (Exit).
Page 7-20
Chapter 7
(3) Opening files for playback
1. Tap the OPEN button.
2. Select the file you wish to play back, then tap OK.
(4) Recording Settings Screen
1.
Select the OPTION button.
Sensitivity Slider
2.
Select Sampling rates and bits you want, and you are allowed to adjust the desired recording
sensitivity.
3.
Tap OK.
Recording quality is directly associated with available recording time. High sampling
rates(KHz unit) and bits require much more memory.
The 3rd party programs
Page 7-21
Appendix B
Warranty
Important: This is your hardware product warranty statement. Read it carefully. Warranty
terms may be different in your country. If so, your authorized dealer or sales and service
office can give you details.
I.
One year limited warranty for hardware & 6 month for
Battery
Cyberbank warrants this hardware product against defects in material and workmanship
for a period of one year from receipt by the original end-user purchaser. If Cyberbank
receives notice of the above-defined defects during the warranty period, Cyberbank will
either, at its option, repair or replace products that prove to be defective. Should
Cyberbank be unable to repair or replace the product within a reasonable amount of time,
the customer's alternate exclusive remedy shall be a refund of the purchase price upon
return of the product.
II. Limitation of warranty
The above warranty shall not apply to defects resulting from:
misuse; unauthorized modification; opening for any reason; operation or storage outside
the environmental specifications for the product; in-transit damage; improper
maintenance; or defect resulting from use of non-Cyberbank software, accessories,
media, supplies, consumables, or such items not designed for use with the product.
Cyberbank makes no other express warranty, whether written or oral, with respect to this
product.
Any implied warranty of merchantability or fitness for a particular purpose is limited to the
one-year duration of this written warranty.
Some states, provinces, or countries do not allow limitations on how long an implied
warranty lasts, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary
from state to state, province to province, or country to country.
Warranty
Page B-1
III. Software Product License Agreement and Software
Product Limited Warranty
This Cyberbank product contains preinstalled software programs. Please read the
Cyberbank Software Product License Agreement before proceeding.
Important: Carefully read this License Agreement and the Limited Warranty statement
before operating the equipment. The rights to the software are licensed, not sold.
Cyberbank or its licensors continue to own all intellectual property rights to the software,
and you will be granted certain rights to use the software upon your acceptance of this
license. Rights in the software are offered only on the condition that you agree to all terms
and conditions of the License Agreement. Operating the equipment indicates your
acceptance of these terms and conditions. If you do not agree to the terms and
conditions of the License Agreement, return the complete package for a full refund now.
Software Product License Agreement
The Cyberbank Software Product License Agreement shall govern the use of all software
that is provided to you, the customer, as part of this Cyberbank product with the exception
of Microsoft Software. Microsoft Products are licensed to you under the Microsoft End
User License Agreement (EULA) contained in the Microsoft documentation. Any thirdparty software supplier's warranty terms that may be found online, or in any
documentation or other materials contained in the product packaging, shall govern the
use of that third-party software.
Use
You may only use the software on a single computer. You may not reverse, assemble, or
decompile the software.
Copies and adaptations
You may make copies or adaptations of the software (a) for archival purposes, or (b)
when copying or adaptation is an essential step in the use of the software with a computer
so long as the copies and adaptations are used in no other manner.
You have no other rights to copy unless you acquire an appropriate license to reproduce
which is available from Cyberbank for some software.
You agree that Cyberbank provides no warranty, free installation, or free training for any
Page B-2
Appendix B
copies or adaptations made by you.
All copies and adaptations of the software must bear the copyright notice(s) contained in
or on the original.
Ownership
You agree that you do not have any title to or ownership of the software, other than
ownership of the physical media. You acknowledge and agree that the software is
copyrighted and protected under the copyright laws.
You acknowledge and agree that the software or part thereof may have been developed
by a third-party software supplier named in the copyright notice(s) included with the
software, who shall be authorized to hold you responsible for any copyright infringement
or violation of this or their own License Agreement.
Transfer of rights in software
You may transfer rights to the software to a third party only as part of
the transfer of all your rights and only if you obtain the prior agreement
of the third party to be bound by the terms of this License Agreement. Upon
such a transfer, you agree that your rights to the software are terminated
and that you will either destroy all your copies and adaptations or deliver
them to the third party. Transfer to a U.S. government department or agency
or to a prime or lower tier contractor in connection with a U.S. government
contract shall be made only upon prior written agreement to terms required
by Cyberbank.
Termination
Cyberbank may terminate this software license for failure to comply with
any of these terms, provided Cyberbank has requested you to cure the
failure and you have failed to do so within thirty (30) days of such notice.
Updates and upgrades
You agree that the software does not include updates and upgrades that may
be available from Cyberbank under a separate support agreement.
Warranty
Page B-3

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2002:11:11 14:23:53-05:00
Create Date                     : 2002:11:11 14:23:38-05:00
Title                           : Microsoft Word - Majesty_contents.doc
Author                          : swkim
Creator                         : PScript5.dll Version 5.2
Producer                        : Acrobat Distiller 5.0 (Windows)
Page Count                      : 56

EXIF Metadata provided by EXIF.tools