CyberTAN Technology BU064 Bluetooth V2.1+EDR User Manual BT manual

Download:
Mirror Download [FCC.gov]
Document ID	1478771
Application ID	wWmjN0d0v/1w8TSBAKh1qQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	103.11kB (1288932 bits)
Date Submitted	2011-06-07 00:00:00
Date Available	2011-07-31 00:00:00
Creation Date	2011-03-01 14:44:10
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2011-06-07 09:11:50
Document Title	Microsoft Word - BT_manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	97040

BU064-A-IN Module USB Manual
BU064-A-IN
Bluetooth v2.1+EDR USB Module
User Manual
Rev 0.1
BU064-A-IN Module USB Manual
Installation and Set up guide
After installing the Bluetooth module and driver to a computer, the user is able to send
content between computer and another Bluetooth device by using Bluetooth wireless
technology.
To connect your computer and phone using Bluetooth wireless technology
1. Turn on the Bluetooth function on computer and phone.
2. Double-click the Bluetooth icon on you computer.
3. Click “Add”
4. Select the box of “My device is set up and ready to be found” then click
“Next”.
5. Select the device you want to add and click “Next”.
6. Select “Choose a passkey for me” the click “Next”.
7. The wizard will off a passkey and please enter the passkey on your phone.
8. The wizard will pop up a window and inform you the Bluetooth connection
established. Click “Finish” to close the wizard.
BU064-A-IN Module USB Manual
BU064-A-IN Module USB Manual
BU064-A-IN Module USB Manual
To send a file using Bluetooth wireless connection.
1. Select the file you want to transfer.
2. Select where you want to send the file then click “Next”.
3. The wizard will inform you when file transfer completed. Click “Finish” to
close the wizard.
BU064-A-IN Module USB Manual
BU064-A-IN Module USB Manual
BU064-A-IN Module USB Manual
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Commission
Statementagainst harmful interference in a residential installation. This
Rules.Federal
TheseCommunication
limits are designed
to provide Interference
reasonable protection
This
equipment
has
been
tested
and
found
to
comply
with
limits for
a Class
digital device,
pursuant
to Part 15 ofwith
the the
equipment generates, uses and can radiate radio frequencythe
energy
and,
if not Binstalled
and used
in accordance
BU064-A-IN
Module
USB
Manual
FCC
Rules.
These
limits
are
designed
to
provide
reasonable
protection
against
harmful
interference
in
residential
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
This
equipment Ifgenerates,
uses does
and can
radiate
radio
frequency to
energy
if not installed
andwhich
used can
in be
occur installation.
in a particular
installation.
this equipment
cause
harmful
interference
radio and,
or television
reception,
accordance
with
the
instructions,
may
cause
harmful
interference
to
radio
communications.
However,
there
is
no
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
measures:
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:
- Reorient
or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Reorient or relocate the receiving antenna.
- Connect the equipment into an outlet on a circuit different from that
- Increase the separation between the equipment and receiver.
to which the receiver is connected.
- Connect the equipment into an outlet on a circuit different from that
- Consult the dealer or an experienced radio/TV technician for help.
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user'sFCC
authority
to operate
this equipment.
Caution:
Any changes
or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following
conditions:
(1)with
This
device
not cause
interference,
and
Thistwo
device
complies
Part
15 ofmay
the FCC
Rules.harmful
Operation
is subject to
the(2)
this device
must
accept
any interference
received,
including
interference
that mayand (2)
following
two
conditions:
(1) This device
may not
cause harmful
interference,
causethis
undesired
operation.
device must
accept any interference received, including interference that may
cause undesired operation.
IMPORTANT NOTE:
FCC Radiation
Exposure
IMPORTANT
NOTE: Statement:
This equipment
complies
with FCC
radiation exposure limits set forth for an uncontrolled environment. This equipment should be
FCC Radiation
Exposure
Statement:
installed
operatedcomplies
with minimum
distance
20cm
between
theset
radiator
& your
body.
Thisand
equipment
with FCC
radiation
exposure
limits
forth for
an uncontrolled
environment. This equipment
This transmitter
must notand
be co-located
or operating
in conjunction
any other
antenna
or transmitter.
should be installed
operated with
minimum distance
20cm with
between
the radiator
& your
body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device is intended only for OEM integrators under the following conditions:
device
is intended
only
for that
OEM20integrators
under the
following
conditions:
1) TheThis
antenna
must
be installed
such
cm is maintained
between
the antenna
and users, and
The antenna
must may
be installed
such that 20with
cm any
is maintained
betweenorthe
antenna and users, and
2) The1)transmitter
module
not be co-located
other transmitter
antenna,
2) as
The2 transmitter
maymet,
not further
be co-located
with test
any will
other
transmitter
or antenna,
As long
conditions module
above are
transmitter
not
be required.
However, the OEM integrator is still
3)
For
all
products
market
in
US,
OEM
has
to
limit
the
operation
channels
in
CH1required
to CH11 with
for 2.4G
band byinstalled
supplied
responsible for testing their end-product for any additional compliance requirements
this module
firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change.
As long as
3 conditions
abovethat
arethese
met, further
transmitter
required.certain
However,
theconfigurations
OEM integrator
still
IMPORTANT
NOTE:
In the event
conditions
can nottest
be will
metnot
(forbeexample
laptop
orisco-location
responsible
for
testing
their
end-product
for
any
additional
compliance
requirements
required
with
this
module
installed
with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final
product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the
IMPORTANT
NOTE:aInseparate
the eventFCC
that authorization.
these conditions can not be met (for example certain laptop configurations or cotransmitter)
and obtaining
location with another transmitter), then the FCC authorization
no longer considered valid and the FCC ID can not be
End ProductisLabeling
used
on
the
final
product.
In
these
circumstances,
the
OEM
integrator
will be
responsible
for re-evaluating
the may
end product
This transmitter module is authorized only for use in device where the antenna
may
be installed
such that 20 cm
be
(including
the
transmitter)
and
obtaining
separate
FCC
authorization.
maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains
End Product Labeling
FCC ID: N89-BU064”.
This transmitter module is authorized only
for
use
in device where
the End
antenna
may be installed such that 20 cm may be
Manual Information
To the
User
maintained between the antenna and users. The final end product must be labeled in a visible area with the following:
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF
“Contains FCC ID: N89-BU064”.
module in the user's manual of the end product which integrates this module.
Manual Information To the End User
The end user manual shall include all required regulatory information/warning as show in this manual.
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF
module in the user's manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
Canadian Regulatory Wireless Notice
BU064-A-IN
Module
USBCanada
Manual
This device complies
with RSS-210
of the Industry
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son
fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2)
ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement
indésirable.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your body.
NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles)
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
This device is intended only for OEM integrators under the following conditions: (For module device use)
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna,
As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still
responsible for testing their end-product for any additional compliance requirements required with this module installed.
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif
module)
1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les utilisateurs, et
2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne,
Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires.
Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité
supplémentaires requis pour ce module installé.
IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another
transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In
these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate Canada authorization.
NOTE IMPORTANTE:
Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou
de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne
peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y
compris l'émetteur) et l'obtention d'une autorisation distincte au Canada.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be
maintained between the antenna and users. The final end product must be labeled in a visible area with the following:
“Contains IC: 5005A-BU064”.
Plaque signalétique du produit final
Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être installée de telle
sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un
endroit visible avec l'inscription suivante: "Contient des IC: 5005A-BU064".

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Create Date                     : 2011:03:01 14:44:10Z
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2011:06:07 09:11:50+08:00
Metadata Date                   : 2011:06:07 09:11:50+08:00
Format                          : application/pdf
Creator                         : 97040
Title                           : Microsoft Word - BT_manual.doc
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:7bf81cb2-c0eb-403f-a89f-5ddc89252aeb
Instance ID                     : uuid:66b83655-48fa-4695-b527-8fa07dbe8a70
Has XFA                         : No
Page Count                      : 10
Author                          : 97040

EXIF Metadata provided by EXIF.tools