CyberTAN Technology ISB7105 Internet Protocal Set Top Box Basic SD/HD with WiFi User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1856355
Application ID	jlRC7NI0YMjVXvyw4g4ByA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	60.43kB (755340 bits)
Date Submitted	2012-12-10 00:00:00
Date Available	2013-06-09 00:00:00
Creation Date	2017-10-29 04:09:05
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-29 04:09:05
Document Title	untitled
Document Creator	PScript5.dll Version 5.2.2
Document Author:	VeraHsu

Installation Manual
Cisco IPTV Receivers
Model ISB7105
Contents
Notice for Installers .......................................................................................................... 4
IMPORTANT SAFETY INSTRUCTIONS.............................................................................. 4
Change the Way You Watch TV ....................................................................................... 7
What’s In the Carton? ...................................................................................................... 7
Safety First ....................................................................................................................... 7
Identify Your Receiver with the Serial Number ................................................................. 7
In This Manual .................................................................................................................. 7
Protecting You and the Environment ................................................................................ 7
Front Panel ....................................................................................................................... 8
Back Panel ....................................................................................................................... 9
Connecting the Receiver ................................................................................................10
ISB7105 Wireless Network Connection .........................................................................11
Connecting the Wireless Access Point to the Wireless Gateway ........................................ 12
Pairing the Wireless Access Point and Receiver ............................................................12
Connections for a High-Deinition TV (HDTV) ................................................................13
Connections for a Standard-Deinition TV (SDTV) .........................................................14
Connections for a VCR or DVD Recorder .......................................................................15
Connecting an Over-the-Air Converter Box...................................................................15
Connecting to an HDTV with an HDMI Connector ..........................................................16
Connecting to an HDTV with a DVI Connector ...............................................................17
Connecting to an HDTV with Component (YPbPr) Connectors ......................................18
Connecting to an SDTV with Component (YPbPr) Connectors ......................................19
Connecting to an SDTV with an RCA-Type Connector ..................................................20
Connecting to a Home Theater System with Component (YPbPr) Connectors .............21
Connecting to a Stereo VCR or DVD Recorder (optional) ..............................................22
Troubleshooting .............................................................................................................23
Avoid Screen Burn-In.....................................................................................................23
Frequently Asked Questions ..........................................................................................24
Picture Formats ..............................................................................................................25
Index ..............................................................................................................................26
Compliance Information .................................................................................................28
Notice for Installers
The servicing instructions in this notice are for use by qualiied service personnel only. To reduce the risk of electric
shock, do not perform any servicing other than that contained in the operating instructions, unless you are qualiied
to do so.
Note to System Installer
For this apparatus, the cable shield/screen shall be grounded
as close as practical to the point of entry of the cable into the
building.For products sold in the US and Canada, this
reminder is provided to call the system installer's attention to
Article 800-93 and Article 800-100 of the NEC (or Canadian
Electrical Code Part 1), which provides guidelines for proper
grounding of the cable shield.
CAUTION: To reduce the risk of electric shock, do not remove cover (or
back). No user-serviceable parts inside. Refer servicing to qualified
service personnel.
WARNING
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
This symbol is intended to alert you that uninsulated voltage
within this product may have sufficient magnitude to cause
electric shock.Therefore, it is dangerous to make any kind of
contact with any inside part of this product.
Ce symbole a pour but d’alerter toute personne qu’un contact
avec une pièce interne de ce produit, sous tension et non isolée,
pourrait être suffisant pour provoquer un choc électrique. Il est
donc dangereux d’être en contact avec toute pièce interne de
ce produit.
This symbol is intended to alert you of the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying this product.
Ce symbole a pour but de vous avertir qu’une documentation
importante sur le fonctionnement et l’entretien accompagne ce produit.
20080814_Installer800
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s
instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including ampliiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding-type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not it into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories speciied by
the manufacturer.
12)
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms
or when unused for long periods of time.
14) Refer all servicing to qualiied service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as a powersupply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
Power Source Warning
A label on this product indicates the correct power
source for this product. Operate this product only from an
electrical outlet with the voltage and frequency indicated
on the product label. If you are uncertain of the type of
power supply to your home or business, consult your
service provider or your local power company.
The AC inlet on the unit must remain accessible and
operable at all times.
IMPORTANT SAFETY INSTRUCTIONS, continued
Ground the Product
WARNING: Avoid electric shock and fire
hazard! If this product connects to cable wiring,
be sure the cable system is grounded (earthed).
Grounding provides some protection against
voltage surges and built-up static charges.
Protect from Exposure to Moisture
and Foreign Objects
WARNING: Avoid electric shock and fire
hazard! Do not expose this product to dripping or
splashing liquids, rain, or moisture. Objects illed
with liquids, such as vases, should not be placed
on this apparatus.
Protect the Product from Lightning
In addition to disconnecting the AC power from the wall
outlet, disconnect the signal inputs.
Verify the Power Source from the
On/Of Power Light
When the on/off power light is not illuminated, the
apparatus may still be connected to the power source.
The light may go out when the apparatus is turned of,
regardless of whether it is still plugged into an AC power
source.
Eliminate AC Power/Mains Overloads
WARNING: Avoid electric shock and fire
hazard! Do not overload AC power/mains,
outlets, extension cords, or integral convenience
receptacles. For products that require battery
power or other power sources to operate them,
refer to the operating instructions for those
products.
Provide Ventilation and
Select a Location
• Remove all packaging material before applying power
to the product.
• Do not place this apparatus on a bed, sofa, rug, or
similar surface.
• Do not place this apparatus on an unstable surface.
• Do not place this apparatus in excessive heat or
moisture.
• Do not install this apparatus in an enclosure, such as
a bookcase or rack, unless the installation provides
proper ventilation.
• Do not place entertainment devices (such as VCRs
or DVDs), lamps, books, vases with liquids, or other
objects on top of this product.
• Do not block ventilation openings.
WARNING: Avoid electric shock and fire
hazard! Unplug this product before cleaning. Do
not use a liquid cleaner or an aerosol cleaner. Do
not use a magnetic/static cleaning device (dust
remover) to clean this product.
WARNING: Avoid electric shock and fire
hazard! Never push objects through the openings
in this product. Foreign objects can cause
electrical shorts that can result in electric shock
or ire.
Service Warnings
WARNING: Avoid electric shock! Do not open
the cover of this product. Opening or removing
the cover may expose you to dangerous voltages.
If you open the cover, your warranty will be void.
This product contains no user-serviceable parts.
Check Product Safety
Upon completion of any service or repairs to this product,
the service technician must perform safety checks
to determine that this product is in proper operating
condition.
Protect the Product When Moving It
Always disconnect the power source when moving the
apparatus or connecting or disconnecting cables.
20110316_IP_No Tuner_Safety
Operating Environment
This product is designed for operation indoors with a
temperature range from 32° to 104° F (0° to 40°C).
Each product should have adequate spacing on all
sides so that the cooling air vents on the chassis are
not blocked.
Change the Way You Watch TV
Welcome to Internet Protocol TV (IPTV). The ISB7105 devices, known as IPTV receivers,
bring a rich, new set of interactive services directly to you through your TV and your
in-home IP network. The receiver uses wireless technology 802.11n to connect to the
network.
The ISB7105 receiver allows for easy and secure connection to IPTV services. The signal
strength indicator on the front panel of the receiver identiies the strength of the wireless
connection and aids in the proper placement of the receiver.
What’s In the Carton?
In addition to this installation manual, the receiver carton contains the following items:
• An ISB7105 Receiver - A wireless receiver
• A power cord and power adapter
To support the wireless functionality of the ISB7105 receiver, you will also need a
wireless access point that is packaged separately from your receiver. See page 12 of
this guide for more information on the wireless access point.
Safety First
Before using the receiver, read the Important Safety Instructions section of this manual.
Identify Your Receiver with the Serial Number
At times your service provider may ask for the serial number. To ind the serial number
for your receiver, look on the bottom of the receiver for the label. The serial number is a
9-digit numeric code to the right of the letters “S/N” on the label.
Use the space provided here to record the serial number:
_______________________________
In This Manual
This manual covers the information you need to connect your receiver to both your
in-home IP network and your entertainment system. The manual also outlines certain
safeguards and installation information. The safety information contained in this manual
was developed and provided solely by the receiver manufacturer, Cisco Systems, Inc.
Protecting You and the Environment
Cisco addresses the environmental impact of networking products throughout their lifecycle,
from product development, manufacturing, and use to service and end-of-life. Integrating
environmental policies into Cisco engineering and manufacturing practices results in socially
accountable business practices that help reduce the environmental impact associated with
networking products.
Front Panel
POWER
LINK
HD
MENU
REC
OK
1 2
9 10
11
1 Power
Turns the receiver on or places it in standby. To restart the
receiver, press and hold the POWER button for 10 seconds. The
LED is green
2 Model Number
Identiies the model number of your receiver as ISB7105
3 Signal Strength
Indicator
Identiies the strength of the wireless connection
4 Link
Indicates network link status. The LED is green
5 HD
Indicates the set-top is set to a resolution of 720p, 1080i, or
1080p. The LED is blue
6 Record
Indicates that a recording is in progress. The LED is red
7 IR Sensor
Receives the infrared signal from the remote control. The sensor
is behind the front panel
8 Menu
Accesses the on-screen menu
9 Arrow Keys
Accesses on-screen services (such as the on-screen guide,
video-on-demand, or pay-per-view) and navigates menus
10 OK
Selects the current item
11 USB Port
USB connector. (Reserved for future use)
Note: This illustration may vary from the actual product.
T15768
ISB7105
Back Panel
NETWORK
Pr
Pb
VIDEO
OUT
AUDIO
OUT
OPTICAL
POWER
T15769
1 Network
Connect to the Ethernet (CAT-5) network at your home, if
applicable
2 YPbPr
Connect the receiver to the component video input (YPbPr) on
the HDTV. See pages 13 and 14 for more information
3 Video Out
Connect to composite input on your HDTV or SDTV
4 Audio Out (L/R)
Connect RCA-type cables to Audio Out to send analog audio
signals (left and right) to a TV with stereo inputs or to a stereo
ampliier
5 HDMI
Connect an HDTV HDMI™ (High-Deinition Multimedia Interface)
cable from the HDTV to the HDMI port. HDMI supports both
digital audio and video. See page 13 for more information
6 Optical
Connect an optical cable to send a digital audio signal to a
surround-sound receiver or other digital audio device
7 Power
Connect the DC output of the AC power adapter (provided) to
deliver power to the receiver
Note: This illustration may vary from the actual product.
Connecting the Receiver
To connect your receiver to your network and home entertainment devices, complete
these steps.
Because the connections
16
for a high-deinition (HD)
or standard-deinition (SD)
or
TV are diferent, you must
determine if your TV is HD
or SD. Your TV must
receive HD signals for
you to enjoy the beneits of HDTV. Refer to the manual that came with your TV
for more information. See page 25 for more information on picture formats.
Make the connections for your TV, VCR, and DVD recorder as follows:
• If you are using an HDTV, see page 13 and the connection diagrams in
this manual.
• If you are using a standard-deinition TV, see page 14 and the
connection diagrams in this manual.
• If you want to record some programs on VCR tape or DVD, see page 15
and the connection diagrams in this manual.
Identify the additional
consumer electronic devices
you will connect to the
receiver and TV. See pages
16 through 22 and refer to
the owner’s manual for the
device.
VCR
DVD
Other
Home Theater
Plug the receiver and the TV into an AC power source that is not
controlled by a switch. For further instructions on completing your setup,
contact your service provider.
10
The ISB7105 receiver allows for easy and secure
connection to IPTV services. The signal strength
indicator on the front panel of the receiver identiies
the strength of the wireless connection and aids in
the proper placement of the receiver.
POWER
LINK
HD
REC
ISB7105
Signal Strength Indicator
T15770
ISB7105 Wireless Network
Connection
• The receiver must be paired with the wireless access point for the wireless
connection to be established. See page 12 for more information.
Wireless
LEDs
Receiver Operational Status
This indicates the wireless signal is excellent. The video quality is good.
This indicates the wireless signal is very good. The video quality is good.
This indicates the wireless signal is good. The video quality is good.
You must obtain three or more green bars at initial installation.
This indicates the wireless signal is fair. The video quality is good.
This indicates the wireless signal is weak. The video quality may be poor.
The STB should be re-oriented to achieve a better wireless signal.
This indicates the wireless signal is very weak. No video can be displayed.
The receiver must be re-oriented to achieve a better wireless signal.
This indicates no wireless connectivity.
11
Connecting the Wireless Access Point to the Wireless
Gateway
1. Connect the 12 VDC Power Supply plug
on the access point to the wall power
outlet. Use only the power adapter
provided with the product.
2. Connect the power plug to the power
receptacle on the wireless access point.
RJ-45
Cable
Wireless
Gateway
Ethernet Port
12VDC
Reset
CL
3. Connect one end of the RJ-45 Ethernet
cable to the Ethernet port on the
wireless access point.
AP
Ethernet
To Wall
Power Outlet
Power
Receptacle
T15773
12VDC
4. Connect the other end of the RJ-45
Ethernet cable to an available Ethernet port
on your wireless gateway.
Wireless LED
Wireless Link LED
Wi-Fi Protected Setup™ (WPS) button
Wi-Fi Protected Setup (WPS) LED
Ethernet LED
Power LED
T15771
Note: This illustration may vary from the actual product.
1 Reset
Reset
Restores factory default settings when
held for more than 5 seconds
2 Mode Switch Converts the wireless access point to
a wireless client
CL
AP
Ethernet
3 Ethernet Port Connects the wireless access point to
a receiver or wireless gateway
4 Power
12VDC
Note: This illustration may vary from the actual product.
T15772
Connects device to the external
12 VDC power supply
Pairing the Wireless Access Point and Receiver
1. Press the OK button on the receiver.
2. Press the WPS button on the wireless access point.
12
Connections for a High-Deinition TV (HDTV)
To use the receiver with an HDTV, you must make one of the following connections to
view the HD content. Refer to the owner’s manual for your TV and the cabling diagrams
in this manual for more detailed connection information.
Although all connections provide you with quality service, we list the connections in our
recommended order.
Notes:
• The labeling on your receiver or HDTV may vary slightly from the illustrations shown below.
• Some cables shown in the connection diagrams may not be included with this receiver.
Receiver
Connections
The YPbPr (red, blue, and green)
connectors provide high-deinition
component video signals to an HDTV, and
a separate audio connection (either L/R or
optical audio).
See the connection diagram on page 18 for
an example.
DVI
AUDIO
OUT
Audio
Video
Adapter Needed
OPTICAL
Pb
Pr
Pb
Pr
AUDIO
OUT
Video
Pr
Adapter Needed
AUDIO
OUT
Audio
RGB
Some HDTVs have only RGB or RGBHV connectors. If you have one of these
HDTVs, you need a Component-to-RGB
adapter, and you need a separate audio
connection.
OPTICAL
INPUT
OPTICAL
Pb
OPTICAL
INPUT
Video
The HDMI connector can provide the
connection to an HDTV with a DVI input. If
your HDTV has a Digital Visual Interface
(DVI) connector, you need an HDMI-to-DVI
adapter, and a separate audio connection
(either L/R or optical audio).
Note: The DVI port on the TV must support
high-bandwidth digital content protection
(HDCP).
See the connection diagram on page 17
for an example.
Audio/Video
Some HDTVs have a High-Deinition
Multimedia Interface (HDMI) connector. The
HDMI connector provides both a digital video
and audio connection. See the connection
diagram on page 16 for an example.
Note: The HDMI port on the TV must
support high-bandwidth digital content
protection (HDCP).
HDTV
Connections
Audio
YPbPr
DVI
HDMI
Use One of These Required
Connections to an HDTV
13
Connections for a Standard-Deinition TV (SDTV)
When using the receiver with an SDTV, you must make one of the following connections
to view content. Some SDTVs may not have all these connections. Refer to the
owner’s manual for your TV and the cabling diagrams in this manual for more detailed
information.
Although all connections provide you with quality service, we list the connections in our
recommended order.
Notes:
• The labeling on your receiver or SDTV may vary slightly from the illustrations shown
below.
• Some cables shown in the connection diagrams may not be included with this receiver.
Pb
Pb
Pr
Pr
See the connection diagram on page 19
for an example.
AUDIO
OUT
Audio
The Video Out connector provides a video
connection to an SDTV. A separate audio
connection is also needed.
VIDEO
OUT
Video
VIDEO
IN
See the connection diagram on page 20
for an example.
AUDIO
OUT
14
SDTV
Connections
Audio
Video Out
YPbPr
The YPbPr (red, blue, and green)
connectors can provide standard-deinition
component video signals to an SDTV. A
separate audio connection is also needed.
Receiver
Connections
Video
Use One of These Required
Connections to an SDTV
Connections for a VCR or DVD Recorder
When using the receiver with a VCR or DVD recorder, you must make one of the
following connections to view content.
Although all connections provide you with quality service, we list the connections in our
recommended order.
Notes:
• The labeling on your receiver, VCR, or DVD recorder may vary slightly from the
illustrations shown below.
• Some cables shown in the connection diagrams may not be included with this receiver.
See the connection diagram on page 24
for an example.
VIDEO
OUT
AUDIO
OUT
Video
For VCRs or DVD recorders with Video
In and Left and Right audio connectors,
use the Video Out and the Audio Out
connectors (Left and Right) on the
receiver.
VCR/DVD Recorder
Connections
Audio
VCR/DVD Recorder
Use One of These Optional Connections Receiver
to a VCR or DVD Recorder
Connections
VIDEO
IN
Connecting an Over-the-Air Converter Box
You can connect an over-the-air converter box directly to your TV to receive certain
local channels, but do not connect the over-the-air converter box directly to your
receiver.
15
Connecting to an HDTV with an HDMI Connector
Cable Used in this Coniguration
• 1 HDMI Cable
Notes:
• The HDMI port on the TV must support high-bandwidth digital content protection (HDCP).
• The HDMI interface supports Dolby™ Digital 5.1 audio.
WARNING: Electric shock hazard! Unplug all electronic devices before
connecting or disconnecting any device cables to the receiver.
Receiver
Pr
NETWORK
Pb
VIDEO
OUT
AUDIO
OUT
OPTICAL
POWER
Back of HDTV
AUDIO
CENTER
CHANNEL IN
ON
HDMI
OFF
AUDIO IN
DVI/HDCP
S-VIDEO
ANT (75 )
VIDEO
VIDEO
L/
MONO
AUDIO
PB
PR
AUDIO
L/
MONO
PB
PR
AUDIO
ANT-1
OUT
HD 1
IN
16
HD 2
IN
OUT
IN
ANT-2
T15774
Connecting to an HDTV with a DVI Connector
Cables Used in this Coniguration
• 1 HDMI-to-DVI Cable or 1 HDMI Cable and 1 HDMI-to-DVI Adapter
• 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted
line] instead of the Audio Left/Right Cable as shown in the diagram, dependent upon
your TV’s capabilities.)
Notes:
• The DVI port on the TV must support high-bandwidth digital content protection (HDCP).
• When you connect the HDMI connector to the DVI connector on your HDTV, you need
an HDMI-to-DVI adapter and a separate audio connection.
WARNING: Electric shock hazard! Unplug all electronic devices before
connecting or disconnecting any device cables to the receiver.
Receiver
Pr
NETWORK
Pb
VIDEO
OUT
AUDIO
OUT
OPTICAL
POWER
OR
Back of HDTV
AUDIO
CENTER
CHANNEL IN
ON
DVI/HDCP
IN
OFF
AUDIO IN
DVI/HDCP
S-VIDEO
OPTICAL
INPUT
ANT (75 )
VIDEO
VIDEO
L/
MONO
AUDIO
PB
PR
AUDIO
L/
MONO
PB
PR
AUDIO
ANT-1
OUT
HD 1
IN
HD 2
IN
OUT
IN
ANT-2
T15775
17
Connecting to an HDTV with Component (YPbPr)
Connectors
Cables Used in this Coniguration
• 1 Component Video Cable (YPbPr)
• 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted line]
instead of the Audio Left/Right Cable as shown in the diagram, dependent upon your
TV’s capabilities.)
WARNING: Electric shock hazard! Unplug all electronic devices before
connecting or disconnecting any device cables to the receiver.
Receiver
Pr
NETWORK
Pb
VIDEO
OUT
AUDIO
OUT
OPTICAL
POWER
OR
Back of
HDTV
AUDIO
CENTER
CHANNEL IN
ON
HDMI
OFF
AUDIO IN
DVI/HDCP
S-VIDEO
OPTICAL
INPUT
ANT (75 )
VIDEO
VIDEO
L/
MONO
AUDIO
PB
PR
AUDIO
L/
MONO
PB
PR
AUDIO
ANT-1
OUT
HD 2
HD 1
IN
18
IN
OUT
IN
ANT-2
T15776
Connecting to an SDTV with Component (YPbPr)
Connectors
Cables Used in this Coniguration
• 1 Component Video Cable (YPbPr)
• 1 Audio Left/Right Cable
Note: The receiver must be set to the proper standard-deinition mode.
WARNING: Electric shock hazard! Unplug all electronic devices before
connecting or disconnecting any device cables to the receiver.
Receiver
Pr
Pb
VIDEO
OUT
AUDIO
OUT
OPTICAL
POWER
Back of SDTV
CABLE IN/
ANT IN
PB
PR
VIDEO
IN
AUDIO
IN
VIDEO
OUT
AUDIO
OUT
CABLE OUT/
ANT OUT
T15777
NETWORK
19
Connecting to an SDTV with an RCA-Type Connector
Cables Used in this Coniguration
• 1 RCA-type Video Cable
• 1 Audio Left/Right Cable
WARNING: Electric shock hazard! Unplug all electronic devices before
connecting or disconnecting any device cables to the receiver.
Receiver
Pr
Back of
SDTV
Pb
VIDEO
OUT
OPTICAL
PR
POWER
CABLE IN/
ANT IN
PB
20
AUDIO
OUT
VIDEO
IN
AUDIO
IN
VIDEO
OUT
AUDIO
OUT
CABLE OUT/
ANT OUT
T15778
NETWORK
Connecting to a Home Theater System
with Component (YPbPr) Connectors
Cables Used in this Coniguration
• 1 Component Video Cable (YPbPr)
• 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted
line] instead of the Audio Left/Right Cable as shown in the diagram.)
Notes:
• This connection requires that audio is provided by the home theater system.
• Consult the user guide that came with your home theater system for information on
connecting your other video and audio devices.
WARNING: Electric shock hazard! Unplug all electronic devices before
connecting or disconnecting any device cables to the receiver.
Receiver
Pr
NETWORK
Pb
VIDEO
OUT
AUDIO
OUT
OPTICAL
POWER
OR
DIGITAL
AUDIO
TV/CABLE
DVD
VIDEO 1
COMPONENT VIDEO
PB
PB
PB
PR
PR
PR
MONITOR
S-VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
VIDEO
VIDEO
VIDEO
VIDEO
S-VIDEO
OUT
AUDIO
AUDIO
AUDIO
Back of Home
Theater Receiver
IN
OUT
IN
OUT
VIDEO OUT
T15779
AUDIO
21
Connecting to a Stereo VCR or DVD Recorder (optional)
The diagram below shows how to connect a recording device to your receiver. Although
it is possible to watch TV using a connection through your VCR or DVD recorder to the
TV, this connection may not provide the best picture, and HDTV users are restricted to an
SD format. In addition, some content is copy protected and passing this content through
the recording device may result in a picture that cannot be viewed.
For these reasons, the connection shown is best used to provide only video and audio to
your recording device and not for normal TV viewing. The connection from the recording
device to the TV (only used for playback of recorded material) depends on the type of
device being used, the outputs that are supported, and the inputs that remain available
for use on your TV.
Consult the owner’s manuals provided with your TV and recording device for more
details on connection options.
Cables Used in this Coniguration
• 1 RCA-type Video Cable
• 1 Set Audio Left/Right Cables
WARNING: Electric shock hazard! Unplug all electronic devices before
connecting or disconnecting any device cables to the receiver.
Connecting your TV directly to the Audio/Video output of your receiver will
assure a more vivid picture and enhance your viewing enjoyment.
Receiver
Pr
Pb
Back of Stereo VCR
or DVD Recorder
AUDIO
OUT
OPTICAL
POWER
CABLE IN/
ANT IN
VIDEO
IN
22
VIDEO
OUT
AUDIO
IN
VIDEO
OUT
AUDIO
OUT
CABLE OUT/
ANT OUT
T15780
NETWORK
Troubleshooting
If the receiver does not perform as expected, the following tips may help. If you need
further assistance, contact your service provider.
No Picture
•
•
•
•
Verify that the power to your TV is turned on.
Verify that your wireless receiver and wireless access point are powered on.
Verify that all cables are properly connected.
If your system includes a VCR, DVD recorder, or stereo, verify that you have properly
connected the device to the receiver.
• Verify that you are using the proper input selection to the home theater receiver or TV.
• Verify that the receiver is set to the proper screen type and resolution.
• If you are using coaxial cable to connect to your TV, verify that the TV is tuned to the
channel designated by your service provider (usually channel 3). Contact your service
provider for the channel information.
Wireless Receiver Signal Strength
• Verify that you are able to receive wireless signal. See page 11 for details.
• Optimal operating conditions for wireless receivers can vary. Performance depends
on many factors, including distance from the access point, building materials,
interference, and other environmental conditions.
No Color or Incorrect Color
• Verify that the current TV program is broadcast in color.
• Adjust the TV color controls.
• If you are using a component video connection (YPbPr), check that all connectors are
completely and properly plugged into the receiver and TV.
• If you are using a component video connection (YPbPr) and your HDTV has only RGB or
RGB-HV connectors, you must use an adapter. You can obtain the adapter through an
electronic parts retailer.
No Sound
• If your setup includes a VCR, DVD recorder, or stereo, verify that you have properly
connected the device to the receiver.
• Verify that the volume is turned up.
• Verify that the mute function is not on.
• Verify the proper input selection to the home theater receiver or TV.
• If you are using coaxial cable to connect to your TV, verify that the TV is tuned to the
correct channel.
Avoid Screen Burn-In
Images such as letterbox bars or side bars, bright closed-captioning backgrounds, station
logos, or any other stationary images may cause the display in your HDTV to age
unevenly; this is known as screen burn-in. Refer to the owner’s manual that came with
your HDTV for more information.
CAUTION: Avoid screen burn-in. Do not display the same ixed images on
your HDTV screen for extended periods of time.
23
Frequently Asked Questions
What Is Digital Television?
Digital television (DTV) is a huge leap forward in television technology compared to analog
television that has been widely available since the 1940s. DTV is delivered and displayed
using digital encoding, similar to the way a PC operates. By using digital technology, there
is no variation in picture and sound quality from the origination point until it is displayed on
your television. You always receive a high-quality picture without the wavy lines or static
you might sometimes get from a weak analog signal. Another feature of digital television
is digital surround sound using Dolby Digital technology, which is the same technology
used to produce the sound you hear in movie theaters.
What Is Standard-Deinition Television?
Standard-deinition television (SDTV) is basic digital television programming delivered by your
service provider. Typically, the SDTV screen is the same, nearly square shape as an analog
television screen. Digital images on an SDTV set are crisp and clear—noticeably better than on
a standard analog television set using an antenna to receive over-the-air signals.
What Is High-Deinition Television?
High-deinition television (HDTV) is a completely new way to send and receive television
broadcast signals. HDTV images are made up of pixels that are much smaller and closer
together than those used in standard analog television, and there are millions of them. Thus,
HDTV can display ive to six times the detail of analog television to deliver picture quality that is
much more realistic, dimensional, and precise. SDTV programs can be viewed on an HDTV.
Are Local TV Stations or Other Programmers Broadcasting in
HDTV?
Many local TV stations and programmers are transmitting digital signals. However, transmitting
a digital signal does not mean transmitting an HDTV signal. Some stations are using the new
bandwidth to broadcast several standard-deinition channels. Most stations and programmers,
once they begin broadcasting in digital, are ofering HD content from their parent network (for
example, CBS, ABC, NBC, Fox, and PBS). Contact your service provider for more information.
Why Aren’t All the Shows I Watch in High-Deinition?
A high-deinition program must originate in HD format and be broadcast in HD format.
Having an HDTV system does not mean that everything you watch will be viewed in highdeinition. Getting the signal from a digital source also does not mean it is high-deinition.
Why Are Some HDTVs 4:3 Aspect Ratio and Others 16:9?
The aspect ratios difer because television manufacturers build both standard-screen and
wide-screen HDTVs to appeal to consumer viewing preferences. The two aspect ratios
are as follows:
• On standard-screen (4:3) HDTVs, the programming is displayed in letterbox format in
the middle of the screen. There are bars surrounding the picture.
• On wide-screen (16:9) HDTVs, the programming is displayed on the full screen.
What Is HDMI and Does it Support Dolby Digital 5.1 Audio?
The High-Deinition Multimedia Interface (HDMI) is an uncompressed, all-digital audio/video
interface. The Dolby Digital audio format that provides up to 5.1 separate channels of surround
sound, and is the standard used for DVD-Video. HDMI supports standard, enhanced, or highdeinition video, plus multi-channel digital audio, such as Dolby Digital audio, on a single cable.
24
Picture Formats
What Is the Diference Between a Standard-Screen and a
Wide-Screen HDTV?
The type of screen your HDTV has (wide-screen or standard-screen) determines how
the receiver displays programs on the screen. The picture format for an HDTV is a
combination of aspect ratio and screen resolution and is diferent for standard-screen
and wide-screen HDTVs.
What Is Aspect Ratio?
An aspect ratio is the ratio of the width to the height of the TV screen. The aspect ratios
difer because the television industry manufactures both standard-screen and widescreen HDTVs to appeal to consumer viewing preferences.
What Is the Screen Resolution?
The screen resolution indicates the amount of detail that the picture displays. Resolution
is identiied by the number of display lines on the screen. The techniques that an HDTV
uses to “paint” the picture on the screen are referred to as progressive and interlaced.
With the progressive scanning method, the lines are drawn on the screen one at a time
in sequential order. Progressive scanning results in a more detailed image on the screen
and is also less susceptible to the licker commonly associated with interlaced scanning.
The interlaced method involves refreshing pixels in alternation — irst the odd lines and
then the even lines.
For advanced setup, select the screen resolution that your TV can support. Refer to your
Feature Guide and HDTV owner’s manuals to choose the proper screen resolution (480i,
720p, 1080i, or 1080p) for your setup.
For example, a screen resolution of 1080i indicates that the screen shows 1080 lines
in an interlaced display, and 720p indicates that the screens shows 720 lines in a
progressive display.
A standard-screen HDTV has a 4x3
aspect ratio. The screen is 4 units wide
for every 3 units tall.
A wide-screen HDTV is one-third wider
than a standard-screen HDTV. The screen
is 16 units wide for every 9 units tall.
16
A screen resolution of 480i ills the
screen.
A screen resolution of 720p, 1080i, or
1080p ills the screen.
25
Index
AC Power input
Arrow keys
Aspect ratio
24
Audio Out
DC Power output
Diagrams. See Connecting the receiver
to other devices
Digital Video Recorder. See DVR
9, 13, 14, 15
Digital TV, What is it
DVD Connection
Back panel
DVI connector
Burn-in of screen
Buttons
24
9, 10, 15, 22
13, 17
23
See Front Panel
Ethernet
9, 12
Cables
9, 12-23
CAT-5
See Ethernet
Coaxial Cable Input
FAQs
23
Compliance, FCC
28
Component video connection. See YPbPr
FCC compliance
28
Formats, picture
25
Frequently Asked Questions. See FAQs
Front panel
Connectors
See also Front panel; Back panel
DVD recorder
HD
15
required for HDTV
VCR
24
13
format
15
HDTV, what is it
10, 15, 22
indicator
HDTV with Component input
(YPbPr) 18
HDTV with DVI connector
HDMI
13, 17
HDTV with HDMI connector
13, 16
IR sensor
Consumer electronic devices
26
See Front panel
10
See HD
Home theater system connection
VCR
Connection
24
High-deinition
9, 10, 15, 22
24
9, 13, 16
Home Theater System with Component
input (YPbPr) 23
Controls
24
HDTV broadcasting
Connecting the receiver to other devices
DVD recorder
Interlaced screen resolution
25
21
Index, continued
Keys. See Front panel
To TV (Video Out) connector
Troubleshooting
Network
digital, what is it
formats
9, 13, 17, 18, 21
Over-the-air converter box
HDTV, what is it
15
programming
wide-screen
Progressive screen resolution
25
13, 23
25
VCR connection
Scan rates. See screen resolution
View programs
Screen
resolution
size
9, 15, 22
Video Out. See To TV
4, 5
burn-in
10, 14, 19, 20, 24
USB port
Safety
25
standard-deinition
24
RGB connector
24
25
standard-screen
8, 9
Programs, view
24
screen size. See aspect ratio
25
Ports. See Connectors
Power
24
25
resolution
Picture formats
23
TV
9, 10, 11
Optical Audio Output
9, 14, 20
23
24
Wide-screen TV
25
25
25
Serial number, locating
Sound, performance
Standard-deinition TV
Standard-screen TV
23
10, 14, 19, 20, 24
25
YPbPr
connector
9, 13, 14, 18, 19, 21
HDTV connection 13, 16-18
home theater connection
21
27
Compliance Information
United States FCC Compliance
This device has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against such interference in
a residential installation. This equipment generates,
uses, and can radiate radio frequency energy. If not
installed and used in accordance with the
instructions, it may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
OFF and ON, the user is encouraged to try to
correct the interference by one or more of the
following measures:
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
diferent from that to which the receiver is connected.
• Consult the service provider or an experienced
radio/television technician for help.
Any changes or modifications not expressly
approved by Cisco Systems, Inc., could void the
user’s authority to operate the equipment.
The information shown in the FCC Declaration
of Conformity paragraph below is a requirement
of the FCC and is intended to supply you with
information regarding the FCC approval of this
device. The phone numbers listed are for FCCrelated questions only and not intended for
questions regarding the connection or operation
for this device. Please contact your service provider
for any questions you may have regarding the
operation or installation of this device.
FCC Declaration of Conformity
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
1) the device may not cause harmful interference,
and 2) the device must accept any interference
received, including interference that may cause
undesired operation.
ISB7105 Receiver
Model ISB7105
Manufactured by: Cisco Systems, Inc.
5030 Sugarloaf Parkway
Lawrenceville, Georgia 30044 USA
Telephone: 678 277-1120
28
Canada EMI Regulation
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la class B est conforme
à la norme NMB-003 du Canada.
20081121 FCC Standard
AVC VIDEO LICENSE
With respect to each AVC/H.264 product, we are
obligated to provide the following notice:
THIS PRODUCT IS LICENSED UNDER THE
AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL USE OF A CONSUMER OR OTHER
USES IN WHICH IT DOES NOT RECEIVE
REMUNERATION TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD (“AVC
VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT
WAS ENCODED BY A CONSUMER ENGAGED IN
A PERSONAL ACTIVITY AND/OR WAS OBTAINED
FROM A VIDEO PROVIDER LICENSED TO PROVIDE
AVC VIDEO. NO LICENSE IS GRANTED OR SHALL
BE IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM MPEG
LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM.
Accordingly, please be advised that service
providers, content providers, and broadcasters
may be required to obtain a separate use license
from MPEG LA prior to any use of AVC/H.264
encoders and/or decoders.
ROVI CORPORATION COPYRIGHT
NOTICE
This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights of Rovi
Corporation. Use of this copyright protection
technology must be authorized by Rovi Corporation,
and is intended for home and other limited
viewing uses only unless otherwise authorized
by Rovi Corporation. Reverse engineering and
disassembly are prohibited.
Disclaimer
Cisco Systems, Inc. assumes no responsibility for
errors or omissions that may appear in this manual.
We reserve the right to change this manual at any
time without notice.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment of
and on, the user is encouraged to try to correct the interference by one of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modiications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
For operation within the 5150-5250 MHz and 5470-5725 MHz frequency ranges, it is restricted to
indoor environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC RF Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
The availability of some speciic channels and/or operational frequency bands are country
dependent and are irmware programmed at the factory to match the intended destination. The
irmware setting is not accessible by the end user.
3 dBi in 5G.
ISB7105 with PCB antenna and max. antenna gain is 5
Industry Canada Statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Caution:
The device for the bands 5150-5250 MHz and 5470-5725 MHz is only for indoor usage to reduce
potential for harmful interference to co-channel mobile satellite systems.
The maximum antenna gain permitted (for devices in the band 5250-5725 MHz (53 dBi)) to comply
with the e.i.r.p. limit; and
The maximum antenna gain permitted (for devices in the band 5725-5825 MHz (53 dBi)) to comply
with the e.i.r.p. limits speciied for point-to-point and non point-to-point operation as appropriate,
as stated in section A9.2(3).
High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz
and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
29
IMPORTANT NOTE:
Canada RF Exposure Statement:
This system has been evaluated for radiofrequency exposure for humans in reference to Canada
Health Code 6 (2009) limits. The evaluation was based on evaluation per RSS-102 Rev 4. The
minimum separation distance from the antenna to general bystander is 7.9 inches (20cm) to
maintain compliance.
Note: The ISB7105 has disabled the 5600-5650M band by S/W to avoid 5600-5650M band
for IC certiication.
Le dispositif pour les bandes 5150-5250 mégahertz et 5470-5725 mégahertz est seulement pour que
l'utilisation d'intérieur ramène le potentiel pour l'interférence néfaste aux systèmes de satellite mobile
de co-canal.
Le gain maximum d'antenne autorisé (pour des dispositifs dans la bande 5250-5725 mégahertz (3
dBi )) pour se conformer à la limite d'e.i.r.p. ; et
Le gain maximum d'antenne autorisé (pour des dispositifs dans la bande 5725-5825 mégahertz (3
dBi) pour se conformer à l'ed de speci‫ ۯ‬de limites d'e.i.r.p. pour l'opération point par point et non
point par point comme approprié, comme stipulé dans la section A 9.2(3).
Des radars de puissance élevée sont assignés en tant qu'utilisateurs principaux (signification ils ont
la priorité) de 5250-5350 MHzand 5650-5850 mégahertz et ces radars pourraient endommager
l'interférence et/ou des dispositifs de LE-LAN.
This device and its antenna(s) must not be co-located or operation in conjunction with any other
antenna or transmitter.
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec
une autre antenne ou transmetteur.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
Declaración de exposición a la radiación de Canada:
Este equipo cumple con los límites de exposición a la radiación de la IC establecidos para un
ambiente no controlado.
Este equipo se debe instalar y operar con una distancia mínima de 20 cm entre el radiador y su
cuerpo.
30
Cisco Systems, Inc.
5030 Sugarloaf Parkway, Box 465447
Lawrenceville, GA 30042
678 277-1120
800 722-2009
www.cisco.com
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its ailiates in the U.S. and other countries. To view a
list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.
Manufactured under license from Dolby Laboratories. Dolby is a trademark of Dolby Laboratories.
HDMI, the HDMI logo, and High-Deinition Multimedia Interface are registered trademarks or trademarks of HDMI Licensing LLC in the
United States and other countries.
Rovi is a trademark of Rovi Corporation.
The Wi-Fi Protected Setup mark is a mark of the Wi-Fi Alliance. Wi-Fi Protected Setup is a trademark of the Wi-Fi Alliance.
Other third party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
© 2012 Cisco and/or its ailiates. All rights reserved.
November 2012
78-4043125-01 Rev A

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : VeraHsu
Create Date                     : 2012:12:10 18:47:58+08:00
Modify Date                     : 2012:12:10 18:50:05+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2012:12:10 18:50:05+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.5.2 (Windows)
Format                          : application/pdf
Title                           : untitled
Creator                         : VeraHsu
Document ID                     : uuid:6ab8f4d2-e8d2-4e5a-9959-7a415fcac84f
Instance ID                     : uuid:0eb4f73b-2430-457f-ae66-7c60fb3fa797
State                           : 1
Version                         : 1.1
Page Count                      : 29

EXIF Metadata provided by EXIF.tools