CyberTAN Technology RFWFD301 Miracast Video Receiver User Manual RF WFD301 12 1246 QSG V1 EN ai

Download:
Mirror Download [FCC.gov]
Document ID	1881609
Application ID	90nha2Hr8E69sdinVUjGLg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	29.05kB (363114 bits)
Date Submitted	2013-01-17 00:00:00
Date Available	2013-01-18 00:00:00
Creation Date	2013-01-11 14:35:00
Producing Software	Acrobat Distiller 10.1.4 (Windows)
Document Lastmod	2013-01-11 16:02:00
Document Title	RF-WFD301_12-1246_QSG_V1_EN.ai
Document Creator	PScript5.dll Version 5.2.2
Document Author:	EUS110120

V1
RF-WFD301_12-1246_QSG_V1_EN.ai
1/11/2013
FINAL
FOR PRINT
2:34:57 PM
QUICK SETUP GUIDE
Rocketfish Advanced Miracast Video Receiver
RF-WFD301
Package contents
Installing your receiver
•
•
•
•
1 Turn off the TV.
2 Insert the Rocketfish Miracast Video Receiver into the HDMI port on your TV. If the
video receiver will not fit into the HDMI port on your TV (too large or too wide), use
the 6" HDMI adapter for a better fit.
3 Insert one end of the 30" cable into the micro USB port on the receiver. Insert the
other end into the USB port on your TV.
4 Turn on your TV, then press the TV’s Input or Source button to select the input HDMI
input of the Rocketfish Wireless Video Receiver.
5 The LED on the Rocketfish Miracast Video Receiver starts to blink and boot up. The
splash screen on your TV is displayed within 30 seconds. If the LED doesn’t blink or
the boot up splash screen is not seen, check to make sure that the TV input you have
selected is correct and the Rocketfish Wireless Video Receiver has power and is fully
inserted.
Rocketfish Miracast Video Receiver
6" HDMI adapter
30" Micro USB charger cable
Quick Setup Guide
System requirements
• Digital TV with an HDMI jack and a USB port
Features
Receiver
Setting up your receiver connection
6" HDMI adapter
30" Micro USB
cable charger
• Requires Android™ Jellybean 4.2.1 or newer
• Works with compatible devices such as your phone or tablet to deliver signals to
your TV, projector or other audio/video devices.
For the first time use, the Rocketfish Miracast Video Receiver will boot up and go into
the Auto mode and is ready to accept a Wi-Fi Direct connection.
1 Verify the TV screen shows Rocketfish Wireless Video Receiver screen as shown below.
2 On your Miracast mobile device, such as a mobile phone or tablet, turn on the Wi-Fi
network.
3 Press the WPS button on the Rocketfish Miracast Video Receiver for first-time
connection.
4 Go to Settings > Display > Wireless Display and select the SSID noted in Step 1.
5 When the connection is successful, your Miracast device’s (such as your phone)
screen is displayed on your TV, indicating that video streaming has started.
Device ID: 0A:FB:1C
Need additional help?
See your User Guide! This comprehensive guide includes
everything from basic how-to steps to more advanced features.
Go to www.rocketfishproducts.com, then click Support &
Service. Enter your model number in the Manual, Firmware,
Drivers & Product Information, then click Search.
Wireless Video Receiver
Choose network, press Enter to connect.
Settings
Before using your new product, please read these instructions to prevent any damage.
Legal notices
One-year limited warranty
SSID:
Discovery Channel:
Operating Channel:
Status:
BBY-41-a048
11
149
Searching for peers
Before using your new product, please read these instructions to prevent any damage.
RF-WFD301_12-1246_QSG_V1_EN.ai
1/11/2013
2:35:01 PM
Legal notices
One-year limited warranty
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warnings:
• Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
• Not for outdoor use!
Visit www.rocketfishproducts.com for details.
We’re here for you:
For customer service call 1-800-620-2790
www.rocketfishproducts.com
Miracast is a trademark of the Wi-Fi Alliance.
Android is a trademark of Google, Inc.
ROCKETFISH is a registered trademark of BBY Solutions, Inc. Registered in some countries.
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2013 BBY Solutions, Inc. All Rights Reserved.
Open Source Statement
For information on the open source software used on this device or to obtain a copy go
to www.rocketfishproducts.com.
V1 ENGLISH 12-1246

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : EUS110120
Create Date                     : 2013:01:11 14:35:00-07:00
Modify Date                     : 2013:01:11 16:02:00-06:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : EUS110120
Title                           : RF-WFD301_12-1246_QSG_V1_EN.ai
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:01:11 16:02-06:00
Producer                        : Acrobat Distiller 10.1.4 (Windows)
Document ID                     : uuid:c66c8f60-0b2e-41f4-afdd-0a5f01943ba5
Instance ID                     : uuid:99e43dc4-fb2d-4560-9dbb-93fc841ee880
Page Count                      : 2

EXIF Metadata provided by EXIF.tools