CyberTAN Technology WE206A1 My Net Wi-Fi Range Extender User Manual My Net AC1300 Wi Fi Range Extender

CyberTAN Technology Inc. My Net Wi-Fi Range Extender My Net AC1300 Wi Fi Range Extender

user manual

My Net™ Wi-Fi Range ExtenderUser ManualPreliminary-Regulatory Only
WD® Service and SupportShould you encounter a problem, please give us an opportunity to address it before returning this product. Most technical support questions can be answered through our knowledge base or e-mail support service at http://support.wdc.com. If the answer is not available or, if you prefer, please contact WD at the best telephone number shown below.Your product includes 30 days of free telephone support during the warranty period. This 30-day period starts on the date of your first telephone contact with WD technical support. E-mail support is free for the entire warranty period and our extensive knowledge base is available 24/7. To help us keep you informed of new features and services, remember to register your product online at http://register.wdc.com.Accessing Online SupportVisit our product support website at http://support.wdc.com and choose from these topics:Downloads - Download drivers, software, and updates for your WD product.Registration - Register your WD product to get the latest updates and special offers.Warranty & RMA Services - Get Warranty, Product Replacement (RMA), RMA Status, and Data Recovery Information.Knowledge Base - Search by keyword, phrase, or answer ID. Installation - Get online installation help for your WD product or software.WD Community – Share your thoughts and connect with other users.Contacting WD Technical SupportWhen contacting WD for support, have your WD product serial number, system hardware, and system software versions available.North America Asia PacificEnglish 855-842-5370 Australia 1 800 42 9861 China 800 820 6682/+65 62430496 Spanish 800.832.4778 Hong Kong +800 6008 6008India 1 800 11 9393 (MNTL)/1 800 200 5789 (Reliance) 011 26384700 (Pilot Line)Europe (toll free)* 00800 ASK4 WDEU Indonesia +803 852 9439 (00800 27549338) Japan 00 531 650442Korea 02 703 6550Europe +31 880062100 Malaysia +800 6008 6008/1 800 88 1908/+65 62430496 Middle East +31 880062100 Philippines 1 800 1441 0159Africa +31 880062100 Singapore +800 6008 6008/+800 608 6008/+65 62430496 Taiwan +800 6008 6008/+65 62430496 * Toll free number available in the following countries: Austria, Belgium, Denmark, France, Germany, Ireland, Italy, Netherlands, Norway, Spain, Sweden, Switzerland, United Kingdom.
1MY NET WI-FI EXTENDERUSER MANUALTable of ContentsWD® Service and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Recording Your WD Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Registering Your WD Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Setting up the Extender with a WPS Enabled Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Setting up Your Extender Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Configuring the Extender for the First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Configuring Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Opening My Dashboard After Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Configuring Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Adding a Wireless Device to Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 Configuring Advanced Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Changing the Administrator Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Resetting and Rebooting the Extender. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Updating the Extender’s Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256 Setting up the Extender in AP Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288 Regulatory and Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . 29Regulatory Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Warranty Information (All Regions Except Australia/New Zealand) . . . . . . . . . . . . . . . . . . 33Warranty Information (Australia/New Zealand only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34GNU General Public License (“GPL”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359 Appendix: Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7910 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
1IMPORTANT USER INFORMATION1MY NET WI-FI EXTENDERUSER MANUALImportant User InformationImportant Safety InstructionsThis device is designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated into this unit will protect you if you observe the following instructions for installation, use, and servicing.Read these instructions.Keep these instructions.Heed all warnings.Follow all instructions.Do not use this apparatus near water.Clean only with dry cloth.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.Only use attachments/accessories specified by the manufacturer.Unplug this apparatus during lightning storms or when unused for long periods of time.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.Carefully read and follow the Quick Install Guide and User Manual.Do not operate this device outside the temperature range of 5°C–35°C (41°F–95°F).Do not drop or shake the device.Do not move the device when it is powered on.Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon them or against them.Do not overload wall outlets.For additional safety information, refer to www.wdc.com.
IMPORTANT USER INFORMATION2MY NET WI-FI EXTENDERUSER MANUALRecording Your WD Product Information In the following table, write the serial and model numbers of your new WD product. You can find this information on the label on the bottom of the device. You should also note the date of purchase. This information may be required when requesting technical support. Registering Your WD Product Your WD product includes 30 days of free technical support during the applicable warranty period for your product. The 30-day period commences on the date of your first telephone contact with WD technical support. Register your WD product online at http://register.wdc.com.Serial Number:Model Number:Purchase Date:System and Software Notes:
2PRODUCT OVERVIEW3MY NET WI-FI EXTENDERUSER MANUALProduct OverviewThank you for purchasing the My Net™Wi-Fi Range Extender. This user manual provides step-by-step instructions for installing and using your new range extender. For the latest WD product information and news, visit our website at www.wdc.com.This chapter contains the following topics:IntroductionFeaturesPackage ContentsComponentsIntroductionFeatures The outstanding features of the My Net Wi-Fi Range extender are described below.Note: For detailed technical specifications, see Appendix A.Intelligence–Automatically transfers Wi-Fi devices to the range extender when you’re out of range.Flexibility– Choose the 2.4 or 5 GHz band with a flip of the switch on the side of the range extender. No PC required.Simple to position–Find the optimal location in your home with the Wi-Fi signal strength indicator.Fast streaming–Use with WD’s My Net™ HD Dual-Band Routers for best possible HD entertainment streaming. Wireless A,B,G,N, AC compatible Wired AP mode supportUPnP supportPackage ContentsIn addition to your My Net Wi-Fi Range extender, the package contains:Network (Ethernet) cable AC Power adapterQuick Install Guide
My Net Wi-Fi Range extenderAC power adapterEthernet cableQuick Install GuideNEEDPRODUCT OVERVIEW4MY NET WI-FI EXTENDERUSER MANUALAccessories For U.S. residents, visit www.shopwd.com to view additional accessories available for your My Net Wi-Fi Range extender. For users outside the U.S., visit http://support.wdc.com.AC Power AdaptersThe AC power adapter varies, depending on your location. Some locations do not require a power plug clip. Units sold in those locations have a fixed power plug. Refer to the illustrations below.EU/KO EU/KOUS/JA/TW US/JA/TWInstalling InstallingRemoving Removing
PRODUCT OVERVIEW5MY NET WI-FI EXTENDERUSER MANUALComponentsFront PanelPower LEDWPS LEDWireless Strength IndicatorAdd labels and descriptions
PRODUCT OVERVIEW6MY NET WI-FI EXTENDERUSER MANUALFront LED indicatorsSide PanelPower buttonWPS buttonFrequency switchFPower portEthernet/Internet portPort LEDsLED Description Power Steady blue when the extender is powered on and operational; flashes slowly during boot-up, firmware upgrades, and system self-tests. Wi-Fi Protected Setup (WPS)When connecting the extender and a wireless device (e.g., a printer) that you want to add to the network, the LED indicates the status of WPS:• When WPS is connecting a network device, the light blinks slowly.• If an error occurs during setup, the light blinks quickly.• After setup, light is solid when WPS is active.Wireless strength18 blue lights flash when you first connect to indicate the strength of the wireless connection (signal). Helps you determine optimal placement. •
PRODUCT OVERVIEW7MY NET WI-FI EXTENDERUSER MANUALSide componentsPort LED indicatorsBack (not shown) Button DescriptionPower button Use the included AC power adapter to connect this port to thepower source.WPS (Wi-Fi Protected Setup) buttonEnables you to configure Wi-Fi security on WPS-enabled devices.Frequency switchSwitch to configure the extender to connect at either 2.4 GHz or 5.0 GHz frequency band.Ethernet (LAN) or Internet portUse an Ethernet (network) cable to connect wired network devicesto these ports.orUse an Ethernet (network) cable to connect this port to a modem.Power port Use the included AC power adapter to connect this port to the power source. Component LED DescriptionEthernet port Link LED (Green) Steady on when a cable connects the port to another Ethernet port.Activity LED (Yellow) Blinks to indicate network activity of that Ethernet port.Internet port Link LED (Green) On when a cable connects the port to the modem.Activity LED (Yellow) Blinks to indicate network activity on that port.Component Description Reset button Press and release–Reboots the extender. When the reset finishes, the Power LED blinks. Press and hold for 5 seconds or longer–Resets to factory default settings.
3GETTING STARTED8MY NET WI-FI EXTENDERUSER MANUALGetting StartedThis chapter contains the following topics:Setting up the Extender with a WPS Enabled RouterSetting up Your Extender ManuallySetting up the Extender with a WPS Enabled RouterIf your router is WPS enabled, follow the steps below. If your router is not WPS enabled or you are experiencing interference problems, go to “Setting up Your Extender Manually” on page 9.1. Set the frequency switch to the frequency of the router (2.4 GHz or 5.0 GHz). Note: If you don’t know whether your router is dual-band, leave the switch set to 2.4 GHz.2. Connect the extender to a power source and press the Power button.3. If WPS is enabled on your router, press the Wi-Fi Protected Setup button (sometimes labeled WPS) on your router and within two minutes, press the WPS button on the extender.Note: If your router does not support WPS, see “Setting up Your Extender Manually” on page 9.The wireless connection light is blue when the extender’s wireless connection is active.1
GETTING STARTED9MY NET WI-FI EXTENDERUSER MANUAL4. Launch a web browser and enter http://WDRangeextender or http://192.168.1.230 in the address field. The Home page of the Dashboard, the extender’s user interface) displays.5. Continue with “Configuring the Extender for the First Time” on page 11.Setting up Your Extender ManuallyThere are cases where you may need to set up the extender manually, for example when:Wi-Fi Protected Setup (WPS) is disabled.The router does not support WPS.Some interference is preventing WPS from working.1. You have two options:Connect the Extender and your PC, Mac computer, or laptop using an Ethernet cable, -OR-Connect a wireless-enabled PC, Mac, or laptop to Network Name: WDRangeExtender.Note: This is an open network without security.
GETTING STARTED10MY NET WI-FI EXTENDERUSER MANUAL2. Launch a web browser. If the extender’s Welcome page does not appear automatically, enter http://WDRangeExtender or http://192.168.1.230 as the address to display it.Note: If the entries in the address field do not access the Welcome screen, enter the address of any website (e.g., Amazon.com) and the browser will redirect to the extender’s Dashboard.3. Continue with “Configuring the Extender for the First Time” on page 11.
GETTING STARTED11MY NET WI-FI EXTENDERUSER MANUALConfiguring the Extender for the First TimeOption #1-WPS is Not Enabled on the Router1. On the Welcome page, select a language in the upper right corner (defaults to English) and make sure that Mode displays range extender (the default value).2. Click Next to display the Welcome screen.3. Click Next to display the Select an available network screen. After a few minutes the screen displays a list of networks.
GETTING STARTED12MY NET WI-FI EXTENDERUSER MANUAL4. Select a Network Name (or another item in its row) and click Connect to display the Secure Network Connection screen displays. 5. Enter the router’s Network Key and click Enter. The Setup Complete screen displays. 6. Click I’m DoneNote: From the Setup Complete screen, you can navigate to screens for registering your extender and adding a new device to your network. If you choose to perform these tasks before configuring the extender, see “Registering Your WD Product” on page 2 and “Adding a Wireless Device to Your Network” on page 20.7. Continue with “Configuring the Extender for the First Time” on page 11.
GETTING STARTED13MY NET WI-FI EXTENDERUSER MANUALOption #2–WPS is Enabled on the Router1. On the Welcome page, select a language in the upper right corner (defaults to English) and make sure that Mode displays range extender (the default value). Click Next to display the Welcome screen.2. Click Next to display the Select an available network screen. After a few minutes the screen displays a list of networks.
GETTING STARTED14MY NET WI-FI EXTENDERUSER MANUAL3. Select a Network Name (or another item in its row) and click Connect to display the Network Key is required screen displays. 4. Click Use WPS to display the Wi-Fi Protected Setup page. a. Press both the WPS button on the extender (or the virtual WPS button on the screen) and the WPS button on the router within two minutes.-OR-If your router has an 8-digit security PIN, enter it and click Connect.b. Click WPS to display the progress of the connection.The Setup Complete page displays. The extender is now connected to the router
GETTING STARTED15MY NET WI-FI EXTENDERUSER MANUALwirelessly.Note: To add a new wireless device to your network, click the Add a New Device to My Network link. See “Adding a Wireless Device to Your Network” on page 20. To configure more settings, or to begin using the extender as is, click I’m Done. See -
4CONFIGURING BASIC SETTINGS16MY NET WI-FI EXTENDERUSER MANUALConfiguring Basic SettingsThis chapter contains the following topics:Opening My Dashboard After SetupConfiguring Wireless SettingsAdding a Wireless Device to Your NetworkOpening My Dashboard After SetupTo open the My Net Wi-Fi Range Extender dashboard after initial configuration:1. Enter http://WDRangeextender in the address field of your browser. The login screen displays:2. Enter the extender’s username (default value is admin) and password (default value is lowercase password) and click Submit. The My Dashboard home screen displays: 3
CONFIGURING BASIC SETTINGS17MY NET WI-FI EXTENDERUSER MANUALThe icons at the top of the screen open modules and wizards for performing important tasks. The red Alert icon at the upper right of the screen displays notices concerning the extender. Icon Name Actions See ...My Dashboard Review and change current settings. “Configuring Basic Settings” on page 16Connect to InternetConnect the extender to the Internet and follow the wizard through the process of setting up the Internet connection.“Connecting to the Internet” on page 17Set up Wireless Configure wireless settings such as network name and security.“Configuring Wireless Settings” on page 17Add a Device Add a wireless device and configure its security settings.“Configuring Advanced Settings” on page 23Advanced SettingsConfigure advanced settings for system administration such as firmware upgrades.“Configuring Advanced Settings” on page 23Alert Click to display recent alerts about new firmware and network issues and shortcuts to important settings.
CONFIGURING BASIC SETTINGS18MY NET WI-FI EXTENDERUSER MANUALReviewing Current Settings The My Dashboard’s home screen is a simple snapshot of the extender’s configuration with the most essential information in one screen. It includes summary information for wireless settings and status. 1. Review the following settings:2. To reconfigure wireless settings, click one of the Set up Wireless links on the screen or the Set up Wireless icon in the icon bar. Continue with “Configuring Wireless Settings” on page 19.Setting DescriptionNetwork Name Unique identifier of the 2.4 GHz or 5.0 GHz network, depending on your selection on the frequency switch.Network Key Password for accessing the wireless network.Mode From the drop-down list, select Wireless Range extender or AP (Access Point)Status Status can be Unconfigured, Configured and Connected, or Unconnected.Number of Devices Connected Number of devices connected to the extender.
CONFIGURING BASIC SETTINGS19MY NET WI-FI EXTENDERUSER MANUALConfiguring Wireless Settings 1. Click the Set up Wireless icon.Note: Alternatively, on the My Dashboard home screen, you can click the Set up 2. View or modify the required wireless settings of the extender:Setting DescriptionNetwork Name Name given to the wireless network. Network Frequency Toggle to 2.4 GHz or 5.0 GHz. Password Password for accessing the wireless network. Wireless Security mode Type of security applied to the wireless network. The default isWPA-Personal/WPA2-Personal.WPA (Wi-Fi Protected Access) and WPA2 are security protocolsthat use a dynamically changing key. WPA2 is the secondgeneration protocol that uses stronger AES (AdvancedEncryption Standard) encryption. The third option is None.WPA/WPA2 mixed security mode provides better compatibilitywith legacy devices. However, for better performance andconnectivity, WPA2 security mode is highly recommended.Mode Wireless Range extender (the default value).Note: If you select AP, continue to “Troubleshooting” on page 28.
CONFIGURING BASIC SETTINGS20MY NET WI-FI EXTENDERUSER MANUAL3. Click Save.Adding a Wireless Device to Your Network Once you configure wireless settings on the extender, you can easily connect wireless devices such as games, notebooks, laptops, tablets, PDAs, or smartphones to the Internet and to other devices on the network. Note: Consult the device’s user guide for guidance on finding and changing its wireless network settings.To connect a WPS-enabled wireless device, you either press the WPS button on the front of the extender or enter a PIN on the device’s Wi-Fi connection page. If the device is not capable of WPS, you can still connect to the extender using a network name and password.Connection Type Can be Static IP, Dynamic IP (DHCP), PPPoE(Username/Password), or PPTP (Username/Password). If you select Static IP, the following additional fields display:IP address–IP address of the Extender. It should be on the same network as your router.Subnet–The subnet mask is used to control how many subnetworks can exist in your local network. The more subnetworks there are, the fewer the hosts you can have per subnet.Gateway–IP address of the router to which this extender is connected.Status Status can be Unconfigured, Configured and Connected, or Unconnected.Number of Devices ConnectedNumber of devices connected to the extender. QoS Enabled Enable or disable the Fastrak QoS application, which prioritizes different client applications/traffic types over the Internet.Setting Description
CONFIGURING BASIC SETTINGS21MY NET WI-FI EXTENDERUSER MANUAL1. On the Dashboard, click the Add a Device icon.2. If your device does not support WPS, when prompted by the device:a. Enter the following into your wireless device’s Wi-Fi connection screen: The Wi-Fi network name for the wireless network you want to use The password for the wireless network you selected Note: By default there is no password. If you establish a password during setup, that password displays in the password field.b. Continue to step 6 to confirm that the device has been added.3. If the new device supports WPS, click the Click Here link at the top right of the screen to display the Secure Network Connection screen. 4. Follow the appropriate procedure below:a. Setup 1: Press the WPS button on the front of the extender or click the virtual button on this screen. On your wireless device, press the physical WPS button or click the virtual WPS button.
CONFIGURING BASIC SETTINGS22MY NET WI-FI EXTENDERUSER MANUALb. Setup 2: If prompted by your wireless device, enter the extender’s WPS PIN shown on the screen into your wireless device. Note: The label on the bottom of the extender displays the default PIN. You can change the PIN on the Wi-Fi Protected Setup screen. Once you change the PIN, the default value is invalid unless you reset the extender to default values. If your device requests the extender’s PIN, enter the PIN shown on the screen.5. Click WPS.6. To confirm that the device has been added, click Confirm.7. The Confirmation screen displays the attached devices in the Client Table. 8. Click OK to return to the My Dashboard home screen.
5CONFIGURING ADVANCED SETTINGS23MY NET WI-FI EXTENDERUSER MANUALConfiguring Advanced Settings The Advanced Settings icon provides screens for registering the extender, changing administrative password, updating the extender’s firmware, restoring factory settings, and rebooting the extender.This chapter contains the following topics:Changing the Administrator PasswordUpdating the Extender’s FirmwareSetting up the Extender in AP ModeNote: To close an Advanced Settings screen, click the Close button at the top of the screen. The My Dashboard home screen displays.Changing the Administrator Password The admin account manages the extender interface. The admin has read/write access and can create passwords. The default password is password; to keep your extender secure, it is a best practice to create a new password. To change the administrator password:1. Click the Advanced Settings icon and then the Administrator tab (link) on the left to display the Admin/Administrator screen. 2. Enter the existing administrator password in Original Password and the new administrator password in the Password and Verify Password fields. Click Save.
CONFIGURING ADVANCED SETTINGS24MY NET WI-FI EXTENDERUSER MANUALResetting and Rebooting the ExtenderResetting to Factory DefaultsYou may want to reset the extender to how it was when you bought it. You have two options for restoring factory defaults: through the user interface or through the Reset button on the bottom of the extender.To use the user interface: 1. Click the Advanced Settings icon and then the System tab (link).2. Click Reset to the right of Reset to Factory Default Settings. 3. When a confirmation message displays, click OK. 4. Wait until the extender reboots before using it.To reset the extender manually:1. Press and hold the Reset button on the bottom of the extender for at least 10 seconds. When the reset finishes, the Power LED blinks.Rebooting You can reboot the extender two ways. If you are physically close to it, just press the On/Off button on the extender. If you cannot easily press the button:1. Click the Advanced Settings icon and then the System tab (link).2. Click Reboot.Important: Do not reboot the extender or close the application while the update is taking place.WARNING! To avoid data loss, before rebooting, stop all network and read/write activities.
CONFIGURING ADVANCED SETTINGS25MY NET WI-FI EXTENDERUSER MANUALUpdating the Extender’s Firmware Check for extender firmware updates and upload new firmware.Note: For best results, upload the firmware using a wired connection. 1. Click the Advanced Settings icon and then the Administrator icon.2. Click the Firmware Update tab.To check for the latest firmware version:1. Click Check Now. The extender searches the WD website for a new firmware file.If a new file exists, the latest firmware version and an Update Now button appear.2. Click Update Now to begin the firmware update. A message tells you how long the upload will take. Please wait while the firmware update is taking place.To update from a file:1. Locate the firmware file on the WD Support site at http://support.wdc.com and download it to your computer.2. On the extender screen, browse to the firmware file you saved and click Open. The file name displays in the browser field on the extender screen.3. Click Upload. A message says how long the upload will take. Please wait while the firmware update is taking place.Important: Do not disconnect or turn off the extender while the update is in process.
6SETTING UP THE EXTENDER IN AP MODE26MY NET WI-FI EXTENDERUSER MANUALSetting up the Extender in AP ModeThe difference between extender mode and access point mode is that an extender has a wireless uplink to the router and an access point has a wired uplink to the router. Note: Choosing to change the mode is a somewhat advanced task.To set up an extender in AP mode, first connect it to a PC or Mac computer or a laptop using an Internet cable (see “Setting up Your Extender Manually” on page 9), and then change its mode to AP mode. To use the extender as an access point, connect the extender directly to your router using an internet cable.You can set up the extender in AP mode from the Welcome screen on the Wireless Settings page. 1. Launch a web browser, and type WDRangeextender in the address field. 2. Do one of the following:If the Welcome page displays, set Mode to AP and click Next: The My Dashboard Home page displays the mode as Wireless range extender:
SETTING UP THE EXTENDER IN AP MODE27MY NET WI-FI EXTENDERUSER MANUAL-OR-If the extender has been set up in range extender mode (default), on the My Dashboard screen change Mode to Wireless Range Extender.Edit Network Name 3. Click Save. The Setup Complete screen displays.4. Click I’m Done. The Dashboard Home screen displays.5. Disconnect the extender from the computer and connect it directly to the router using a network cable. The Access Point is ready for use.
8TROUBLE SH OO TING28MY NET WI-FI EXTENDERUSER MANUALTroubleshootingProblem SolutionThe power LED does not illuminate. 1. Ensure that the power cord is correctly connected to the extender.2. Ensure that the electrical outlet is working properly. To do this, plug a different electronic device into the outlet and try to power it on.3. Ensure that you are using the AC adapter provided with the extender.A port number LED does not illuminate. 1. Ensure that the connected device is powered on.2. Ensure that the Ethernet cable(s) are securely connected to the ports on both the device and the extender.3. To ensure that the cable between the extender and the electronic device is working properly, replace it with another cable.Computers are unable to access the Internet.1. Ensure that the extender is powered on. The power LED should be solid and not flashing.2. Check the cable connections between the modem, extender and computer. The Ethernet cable connected to your modem should be connected to the Internet port on the extender. An Ethernet cable from your computer should be connected to a LAN port on the side of the extender.3. Power off and power on your modem, extender, and computer.4. If all else fails, install My Net View from the product CD or contact Technical Support at http://support.wdc.com or your ISP.All front panel LEDs flash continuously. 1. Relocate your extender to a place that has good ventilation.2. Turn off your extender, and set it aside for 15 to 20 minutes until it cools down. Turn your extender back on to resume operation.3. If the problem persists, contact Technical Support at http://support.wdc.com.The extender has a weak signal 1. Tune as described in “” on page 8.This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Cet appareil et son antenne (s) ne doit pas The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. Le dispositif pourrait automatiquement cesser d'The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5825 MHz) doit se conformer
9REGULATORY AND WARRANTY INFORMATION29MY NET WI-FI EXTENDERUSER MANUALRegulatory and Warranty InformationThis chapter contains the following topics:Regulatory ComplianceWarranty Information (All Regions Except Australia/New Zealand)Warranty Information (Australia/New Zealand only)GNU General Public License (“GPL”)Regulatory Compliance Federal Communication Commission Interference StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Regulatory Information/DisclaimersInstallation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines.For operation within 5.15 ~ 5.25 GHz frequency range, it is restricted to indoor environment. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.Pour les produits disponibles aux
REGULATORY AND WARRANTY INFORMATION30MY NET WI-FI EXTENDERUSER MANUALCAUTION: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.Note: The country code selection is for non-US models only and is not available for all US models. Per FCC regulations, all WiFi products marketed in the US must be fixed to US operation channels only.Industry Canada (IC)This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. CAUTION! The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.AVERTISSEMENT! Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.ICES-003/NMB-003 StatementCet appareil numérique de la classe B est conforme à la norme ICES-003 du Canada.This device complies with Canadian ICES-003 Class B.This product is intended to be supplied by a listed limited power source, double insulated, or direct plug-in power unit marked “Class 2.”Safety ComplianceApproved for US and Canada. CAN/CSA-C22.2 No. 60950-1, UL 60950-1: Safety of Information Technology Equipment. Approuvé pour les Etats-Unis et le Canada. CAN/CSA-C22.2 No. 60950-1, UL 60950-1: Sûreté d'équipement de technologie de l'information.This device is only for use with the compatible UL Listed AC adapter.Cet appareil n'est destiné qu'a` des adaptateur compatibles marqués "UL Listed".
REGULATORY AND WARRANTY INFORMATION31MY NET WI-FI EXTENDERUSER MANUAL以下警語適用󰶀灣地區經型式認證合格之低󰰯率射頻電機，非經許󰵿，公司商號或使用者均不得擅自變更頻率󰰰大󰰯率或變更原設計之特性及󰰯能低󰰯率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用前項合法通信，指依電信法規定作業之無線電通信低󰰯率射頻電機須忍受合法通信或工業科學及醫療用電波輻射性電機設備之干擾For Mexico OnlyLa operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.For Russia FAC DoC Only For Brazil OnlyEste equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não causar interferência a sistema operando em caráter primário.CE Compliance for EuropeOperation of this device is subjected to the following National regulations and may be prohibited to use if certain restriction should be applied.Marking by the CE symbol indicates compliance of this system to the applicable Council Directives of the European Union, including the EMC Directives (2004/108/EC), (1999/5/EC), the Low Voltage Directive (2006/95/EC), and EuP Directive (2005/32/EC). A “Declaration of Conformity” in accordance with the applicable directives has been made and is on file at Western Digital Europe. Die Kennzeichnung mit dem CE-Symbol zeigt an, dass dieses System die anwendbaren Richtlinien der Europäischen Union erfüllt, einschließlich der EMV-Richtlinien (2004/108/EG), (1999/5/EG), der Niederspannungsrichtlinie (2006/95/EG) und der Richtlinie (2005/32/EG) des Europäischen Parlaments. Eine „Konformitätserklärung“ gemäß den anwendbaren Richtlinien wurde abgegeben und kann bei Western Digital Europe eingesehen werden.Le symbole CE sur l'appareil indique la conformité de cet appareil avec les directives applicables du Conseil de l'Union Européenne, dont les directives EMC (2004/108/EC), (1999/5/EC), la directive sur les limites de tension (2006/95/EC) et la directive EuP (2005/32/EC), si applicable. Une « déclaration de conformité » conforme aux directives applicables a été effectuée et est consultable chez Western Digital Europe.Il marchio CE indica la conformità del sistema alle direttive applicabili del Consiglio dell'Unione europea, tra cui le Direttive EMC (2004/108/CE), (1999/5/CE), la Direttiva Bassa Tensione (2006/95/CE ), e la Direttiva EuP (2005/32/CE). Una “Dichiarazione di conformità” redatta in base alle direttive vigenti è disponibile presso Western Digital Europe.La marca con el símbolo CE indica el cumplimiento de este sistema de las Directivas del Consejo de la Unión Europea correspondientes, incluidas las directivas EMC (2004/108/EC) y (1999/5/EC), la Directiva de bajo voltaje (2006/95/CE) y la Directiva EuP (2005/32/EC). Se
REGULATORY AND WARRANTY INFORMATION32MY NET WI-FI EXTENDERUSER MANUALha realizado una "Declaración de conformidad" de acuerdo con las directivas aplicables y se encuentra archivada en Western Digital Europe.CE-märkningen innebär att detta system uppfyller Europeiska Unionens tillämpliga rådsdirektiv, inklusive EMC-direktivet (2004/108/EC), (1999/5/EC), lågspänningsdirektivet (2006/95/EC) och EuP-direktivet (2005/32/EC). En "Konformitetsdeklaration" i enlighet med gällande direktiv har gjorts och finns arkiverad hos Western Digital Europe.Merking med CE-symbolet indikerer at dette systemet samsvarer med gjeldende direktiver (council directives) for EU, inkludert EMC-direktiv (2004/108/EF), (1999/5/EF), Lavspenningsdirektiv (2006/95/EF) og EuP-direktiv (2005/32/EF). En "Samsvarserklæring" i henhold til gjeldende direktiver har blitt opprettet og er i Western Digital Europas arkiver.CE-merkintä osoittaa tämän järjestelmän yhdenmukaisuuden sovellettavissa olevien Euroopan yhteisön neuvoston direktiivien kanssa, mukaan lukien EMC-direktiivi (2004/108/EC), (1999/5/EC), alijännitedirektiivi (2006/95/EC) sekä EuP-direktiivi (2005/32/EC). "Noudattamisjulistus" on jätetty asiaankuuluvien direktiivien mukaisesti, ja se on tallessa Western Digital Europessa.Mærkning med CE-symbolet angiver at systemet overholder Europaparlamentets og Rådets direktiver, herunder EMC-direktiverne (elektromagnetisk kompatibilitet) (2004/108/EC), (1999/5/EC) og lavspændingsdirektivet (2006/95/EC) og EuP-direktivet 2005/32/EC. En “Declaration of Conformity” (overensstemmelsesattestering) i henhold til gældende direktiver er afgivet og opbevares hos Western Digital Europe.М  CE    щ   х  С Е С,   ч     (2004/108/EC, 1999/5/EC),     (2006/95/EC)    х, щх  (2005/32/EC). З    х ,   Western Digital, х  х ё  .Η α  ο οο CE υπο  ο α αυ υοφα   χου ο ου Συουου  υπα Έ, υπααο  ο π οα υαα (2004/108/Κ), (1999/5/Κ),  οα π χα  (2006/95/Κ) α  οα ου υπαο Κοοουου (2005/32/Κ). Έχ πααοπο α « υφ», φα   χου ο α α α αχα  Western Digital υπ.
REGULATORY AND WARRANTY INFORMATION33MY NET WI-FI EXTENDERUSER MANUALEnvironmental Compliance (China) ѻѻકЁ᳝↦᳝ᆇ⠽䋼៪ܗ㋴ⱘৡ⿄ঞ৿䞣䚼ӊৡ⿄ ᳝↦᳝ᆇ⠽䋼៪ܗ㋴ 䪙 ∲ 䬝 ݁Ӌ䫀 ໮⒈㘨㣃 ໮⒈Ѡ㣃䝮ᴎ໇ᴎㆅ;22222⬉䏃ᵓ㒘ড়ᵓव;22222⬉⑤বय़఼⬉⑤կᑨ఼;22222⹀Ⲹ;222222ҷ㸼ℸ⾡䚼ӊⱘ᠔᳝ഛ䋼ᴤ᭭Ё᠔৿ⱘ䆹⾡᳝↦᳝ᆇ⠽䋼ഛԢѢЁढҎ⇥݅੠೑ֵᙃѻϮ䚼᠔乕Ꮧⱘlj⬉ᄤֵᙃѻકЁ᳝↦᳝ᆇ⠽䋼ⱘ䰤䞣㽕∖NJ6-7㾘ᅮⱘ䰤䞣DŽ;ҷ㸼ℸ⾡䚼ӊ᠔⫼ⱘഛ䋼ᴤ᭭Ё㟇ᇥ᳝ϔ㉏ᴤ᭭݊᠔৿ⱘ᳝↦᳝ᆇ⠽䋼催ѢЁढҎ⇥݅੠೑ֵᙃѻϮ䚼᠔乕Ꮧⱘlj⬉ᄤֵᙃѻકЁ᳝↦᳝ᆇ⠽䋼ⱘ䰤䞣㽕∖NJ6-7㾘ᅮⱘ䰤䞣䰸䴲ѻકϞ঺᳝ᷛ䆄ˈ᠔᳝ݙ䰘ѻકঞ݊䚼ӊⱘþ⦃ֱՓ⫼ᳳ䰤ÿഛ⬅ℸᰒ⼎ⱘヺো㸼⼎DŽℸ⦃ֱՓ⫼ᳳ䰤া䗖⫼Ѣѻક᠟ݠЁ᠔㾘ᅮⱘՓ⫼ᴵӊDŽ೼ℸ㸼ЁˈӕϮৃ㛑䳔㽕ḍ᥂ᅲ䰙ᚙމᇍᷛ䆄ā;āⱘ乍Ⳃ䖯㸠䖯ϔℹⱘᡔᴃᗻ㾷䞞DŽ Warranty Information (All Regions Except Australia/New Zealand)Limited WarrantyWD warrants that the Product, in the course of its normal use, will for the term defined below, be free from defects in material and workmanship and will conform to WD’s specification therefor. The term of your limited warranty depends on the country in which your Product was purchased. The term of your limited warranty is for 1 year in the North, South and Central America region, 2 years in the Europe, the Middle East and Africa region, and 1 year in the Asia Pacific region, unless otherwise required by law. The term of your limited warranty period shall commence on the purchase date appearing on your purchase receipt. WD may at its discretion make extended warranties available for purchase. WD shall have no liability for any Product returned if WD determines that the Product was stolen from WD or that the asserted defect a) is not present, b) cannot reasonably be rectified because of damage occurring before WD receives the Product, or c) is attributable to misuse, improper installation, alteration (including removing or obliterating labels and opening or removing external enclosures, unless the product is on the list of limited user-serviceable products and the specific alteration is within the scope of the applicable instructions, as found at http://support.wdc.com), accident or mishandling while in the possession of someone other than WD. Subject to the limitations specified above, your sole and exclusive warranty shall be, during the period of warranty specified above and at WD’s option, the repair or replacement of the Product with an equivalent or better Product. The foregoing warranty of WD shall extend to repaired or replaced Products for the balance of the applicable period of the original warranty or ninety (90) days from the date of shipment of a repaired or replaced Product, whichever is longer.The foregoing limited warranty is WD’s sole warranty and is applicable only to products sold as new. The remedies provided herein are in lieu of a) any and all other remedies and warranties, whether expressed, implied or statutory, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and b) any and all obligations and liabilities of WD for damages including, but not limited to accidental, consequential, or special damages, or any financial loss, lost profits or expenses, or lost data arising out of or in connection with the purchase, use, or performance of the Product, even if WD has been advised of the possibility of such damages. In the United States, some states do not allow exclusion or limitations of incidental or consequential damages, so the limitations above may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
REGULATORY AND WARRANTY INFORMATION34MY NET WI-FI EXTENDERUSER MANUALObtaining ServiceWD values your business and always attempts to provide you the very best of service. If this Product requires maintenance, either contact the dealer from whom you originally purchased the Product or visit our product support Web site at http://support.wdc.com for information on how to obtain service or a Return Material Authorization (RMA). If it is determined that the Product may be defective, you will be given an RMA number and instructions for Product return. An unauthorized return (i.e., one for which an RMA number has not been issued) will be returned to you at your expense. Authorized returns must be shipped in an approved shipping container, prepaid and insured, to the address provided on your return paperwork. Your original box and packaging materials should be kept for storing or shipping your WD product. To conclusively establish the period of warranty, check the warranty expiration (serial number required) via http://support.wdc.com. WD shall have no liability for lost data regardless of the cause, recovery of lost data, or data contained in any Product placed in its possession.Warranty Information (Australia/New Zealand only)For consumers purchasing products in Australia and New Zealand, please refer to this warranty information.Nothing in this warranty modifies or excludes your legal rights under the Australian Competition and Consumer Act or the New Zealand Consumer Guarantees Act. This warranty identifies WD's preferred approach to resolving warranty claims which is likely to be quick and simple for all parties. No other warranties either express or implied by law, including but not limited to those contained in the Sale of Goods Act, are made with respect to the Product. If you purchased your Product in New Zealand for the purposes of a business, you acknowledge and agree that the New Zealand Consumer Guarantees Act does not apply.In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if goods fail to be of acceptable quality and the failure does not amount to a major failure. What constitutes a major failure is set out in the Australian Consumer Law. WarrantyWD warrants that the Product, in the course of its normal use, will for the term defined below, be free from defects in material and workmanship and will conform to WD’s specifications. The term of your warranty is 1 year in Australia and New Zealand, unless otherwise required by law. The term of your warranty period shall commence on the purchase date appearing on your purchase receipt from an authorized distributor or authorized reseller. Proof of purchase shall be required to be eligible for this warranty and to establish the commencement date of this warranty. Warranty service will not be provided unless the Product is returned to an authorized distributor, authorized reseller or regional WD return center where the Product was first shipped by WD. WD may at its discretion make extended warranties available for purchase. WD shall have no liability for any Product returned if WD determines that the Product was (i) not purchased from an authorized distributor or authorized reseller, (ii) not used in accordance with WD specifications and instructions, (iii) not used for its intended function, or (iv) stolen from WD, or that the asserted defect a) is not present, b) cannot reasonably be rectified because of damage occurring before WD receives the Product, or c) is attributable to misuse, improper installation, alteration (including removing or obliterating labels and opening or removing external enclosures, including the mounting frame, unless the product is on the list of limited user-serviceable products and the specific alteration is within the scope of the applicable instructions, as found at http://support.wdc.com), accident or mishandling while in the possession of someone other than WD.PRODUCTS ARE COMPLEX AND FRAGILE ITEMS THAT MAY OCCASSIONALY FAIL DUE TO (A) EXTERNAL CAUSES, INCLUDING WITHOUT LIMITATION, MISHANDLING, EXPOSURE TO HEAT, COLD, AND HUMIDITY, AND POWER FAILURES, OR (B) INTERNAL FAULTS. SUCH FAILURES CAN RESULT IN THE LOSS, CORRUPTION, DELETION OR ALTERATION OF DATA. NOTE THAT YOU SHALL BE RESPONSIBLE FOR THE LOSS, CORRUPTION, DELETION OR ALTERATION OF DATA HOWSOEVER CAUSED, AND FOR BACKING UP AND PROTECTING DATA AGAINST LOSS, CORRUPTION, DELETION OR ALTERATION. YOU AGREE TO CONTINUALLY BACK UP ALL DATA ON THE PRODUCT, AND TO COMPLETE A BACKUP PRIOR TO SEEKING ANY GENERAL SERVICE AND TECHNICAL SUPPORT FROM WD.In Australia, if the Product is not of a kind ordinarily acquired for personal, domestic or household use or consumption, provided it is fair and reasonable to do so, WD limits its liability to replacement of the Product or supply of equivalent or better Product. This warranty shall extend to repaired or replaced Products for the balance of the applicable period of the original warranty or ninety (90) days from the date of shipment of a repaired or replaced Product, whichever is longer. This warranty is WD’s sole manufacturer's warranty and is applicable only to Products sold as new.
REGULATORY AND WARRANTY INFORMATION35MY NET WI-FI EXTENDERUSER MANUALObtaining ServiceWD values your business and always attempts to provide you the very best of service. Should you encounter any problem, please give us an opportunity to address it before returning this Product. Most technical support questions can be answered through our knowledge base or e-mail support service at http://support.wdc.com. If the answer is not available or, if you prefer, please contact WD at the applicable telephone number shown in the front of this document.If you wish to make a claim, you should initially contact the dealer from whom you originally purchased the Product. If you are unable to contact the dealer from whom you originally purchased the Product, please visit our product support Web site at http://support.wdc.com for information on how to obtain service or a Return Material Authorization (RMA). If it is determined that the Product may be defective, you will be given an RMA number and instructions for Product return. An unauthorized return (i.e., one for which an RMA number has not been issued) will be returned to you at your expense. Authorized returns must be shipped in an approved shipping container, prepaid and insured, to the address provided with your RMA number. If following receipt of a qualifying claim under this warranty, WD or the dealer from whom you originally purchased the Product determines that your claim is valid, WD or such dealer shall, at its discretion, either repair or replace the Product with an equivalent or better Product or refund the cost of the Product to you. You are responsible for any expenses associated with a claim under this warranty. The benefits provided to you under this warranty are in addition to other rights and remedies available to you under the Australian Competition and Consumer Act or the New Zealand Consumer Guarantees Act.Your original box and packaging materials should be kept for storing or shipping your WD product. To conclusively establish the period of warranty, check the warranty expiration (serial number required) via http://support.wdc.com. Western Digital Technologies, Inc. 3355 Michelson Drive, Suite 100 Phone: 949-672-7000 E-mail: support@wdc.comGNU General Public License (“GPL”)Firmware incorporated into this product may include third party copyrighted software licensed under the GPL or Lesser General Public License ("LGPL") (collectively, “GPL Software”) and not Western Digital’s End User License Agreement. In accordance with the GPL, if applicable: 1) the source code for the GPL Software may be downloaded at no charge from http://support.wdc.com/download/gpl or obtained on CD for a nominal charge from http://support.wdc.com/download/gpl or by calling Customer Support within three years of the date of purchase; 2) you may re-use, re-distribute, and modify the GPL Software; 3) with respect solely to the GPL Software, no warranty is provided, to the extent permitted by applicable law; and 4) a copy of the GPL is included herewith, may be obtained at http://www.gnu.org, and may also be found at http://support.wdc.com/download/gpl.Modification of or tampering with the Software, including but not limited to any Open Source Software, is solely at your own risk. Western Digital is not responsible for any such modification or tampering. Western Digital will not support any product in which you have or have attempted to modify the Software supplied by Western Digital.
APPENDIX: TECHNICAL SPECIFICATIONS79MY NET WI-FI RANGE EXTENDERUSER MANUALAppendix: Technical SpecificationsSpecification ValueWireless standard IEEE 802.11n clientEthernet 1 x Gigabit EthernetI/O ports (1) Ethernet (RJ-45) port Bands 2.4 GHz and 5.0 GHz selectable dual modeMIMO mode?3x3 (2.4 GHz), 3x3(5 GHz)Security WPA/WPA2-PSKWEPQoSFirewall N/ASupported operating systems Windows XP with Service Pack 3Windows Vista with Service Pack 2Windows 7 with Service Pack 1Mac OS X LeopardMac OS X Snow LeopardMac OS X LionSupported web browsersInternet Explorer 7 and laterSafari 2 and laterFirefox 2 and laterChrome 7 and laterPhysical dimensions Length: 6.0" (153.48 mm)Width: 5.2" (132 mm)Height: 2.0" (51 mm)Weight: 0.?? lb (0.?? Kg)Power supply Input voltage: 100V to 240V ACInput frequency: 50 to 60 HzOutput voltage: 12V DC, 3APower supply: 36WTem p e r a tu re Operating temperature: ? to ? oC (? to ? oF)Non-operating temperature: -? to ?oC (-? to ? oF)
INDEX82MY NET WI-FI RANGE EXTENDERUSERS MANUALIndexAAC power adapters 6access point setup 74accessing files remotely 4accessing internal drive and external USB storage 68accessories 5adding a wireless device 28Additional Features screens 48additional software 4Admin screens 56administrator password 67Advanced LAN screens 43Advanced Settings screens 35advanced tasks 61Advanced WAN (Internet) screens 36Advanced Wireless screens 41attached storage, accessing files on 68Bback panel of extender 7basic wireless settings 24bottom of extender 8box contents 5buttonClose 35On/Off 13Reset 8WPS 7, 28CCD, getting started with 9changing admin password 67closing an Advanced Settings screen 35connecting to the Internet 23current settings 20Ddashboard icons 21device not WPS enabled, connecting 28, 29DHCP server setup 75dual band speed 3EEasy Setup for Windows computers 9environmental compliance (China) 88external storage, setting up 26Ffactory defaults, restoring 73FasTrack Plus 3firmware updates 72front of extenderlLEDs 7GGPL software 90guest access 4, 61Iicons, dashboard 21installing the extenderusing a browser 13using Easy Setup (Windows PC) 9internal drive storage, accessing files on68Internetconnection 23security 4Internet Security &Parental Controls screen 49KKensington security slot 8LLEDsback of extender 7front panel 7MMAC Filter screen 49My Dashboardaccessing during setup 14current settings 22My Net software for Mac computers 17My Net View 4, 79Oobtaining service 88obtaining service (Australia and New Zea-land) 89operating precautions 1Ppackage contents 5parental controls 4, 62port forwarding 77power adapters 6productaccessories 5overview 3
INDEX83MY NET WI-FI RANGE EXTENDERUSERS MANUALrecording information 2registration 2safety information 1warranty 88Rrebooting 73recording product information 2registering the extender 2regulatory compliance 84remote access 4Remote Access screens 48Reset button 8restoring to factory defaults 73RoHS 88extenderas an access point 74back panel 7components, views, LEDS 6front LEDs 7front panel 6installation 10port LEDs 7USB ports 3wired speed 3wireless speed 3Ssafety instructions 1screensAdmin 56Administrator 57Advanced lan 43ALG 53Connection Check 58Device and Client Tables 44Device Mode 59DHCP Server Settings 44DMZ 49Dynamic DNS 40Enhanced WMM (My Net N900) 55FasTrack Plus QoS 54Firewall 48Firmware Update 58Guest Access 43Host and Lan Settings 44Internet status 36IPv6 40IPv6 Status 40Language 59Log 59MAC Filter 49Network UPnP 55Parental Controls 49Port Forwarding 53Registration 59Routing 53System 58Time Settings 57Wi-Fi Protected Setup (WPS) 42Wireless Setup 41service 88service (Australia /New Zealand) 89settingsadvanced 35basic 20storage 26settupPC) 10setupoptions 10Windows Vista/Win7 9Windows XP 9sharing a printer on the network 80software, GPL 90speed, wired 3storageattached USB drive 68capacity 4internal drive 68settings 26Ttasksadvanced 61basic 20troubleshooting 83Uupdating firmware 72UPnP configuration 77Wwarranty 88warranty, Australia/New Zealand 89WD Print Share 4, 80WD Print Share, installingon a Mac 81WD Print Share, installlingon a Windows computer 80WD Print Share, using 81WD Quick Viewaccessing stored filee 68description 4
INDEX84MY NET WI-FI RANGE EXTENDERUSERS MANUALWD Smartware 5Wi-Fi Protected Security(WPS) 4wirelessadding devices 28settings 24speed, simultaneous dual band 3WPS LED 7WPS-enabled device, connecting 28WD® Service and Support31 Important User Information1Important Safety Instructions1Recording Your WD Product Information 2Registering Your WD Product 22 Product Overview3Introduction3Features3Package Contents3Components53 Getting Started8Setting up the Extender with a WPS Enabled Router8Setting up Your Extender Manually9Configuring the Extender for the First Time114 Configuring Basic Settings16Opening My Dashboard After Setup16Configuring Wireless Settings 19Adding a Wireless Device to Your Network 205 Configuring Advanced Settings 23Changing the Administrator Password23Resetting and Rebooting the Extender24Updating the Extender’s Firmware256 Setting up the Extender in AP Mode267 Troubleshooting288 Regulatory and Warranty Information29Regulatory Compliance29Warranty Information (All Regions Except Australia/New Zealand)33Warranty Information (Australia/New Zealand only)34GNU General Public License (“GPL”)359 Appendix: Technical Specifications7910 Index82

Navigation menu