CyberTAN Technology WM141 2.4GHz Draft 802.11n 2*2 miniCard Module User Manual WD 615 Product Specification

Download:
Mirror Download [FCC.gov]
Document ID	1234044
Application ID	3oSZEc+3MSK81R8jm4ai9g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.11kB (113842 bits)
Date Submitted	2010-01-28 00:00:00
Date Available	2010-01-28 00:00:00
Creation Date	2010-01-25 09:49:53
Producing Software	Acrobat Distiller 8.0.0 (Windows)
Document Lastmod	2010-01-26 15:51:31
Document Title	WD-615 Product Specification
Document Creator	Acrobat PDFMaker 6.0 for Word
Document Author:	William Wang, Bryan Chou

Product Specification of the WM141
No.99 PARK AVE. III, Science-based Industrial Park,
Hsin-Chu 308, Taiwan, R.O.C.
Phone (886) 3-577-7777
Fax (886) 3-577-7788
WM141
2.4GHz Draft 802.11n 2*2 miniCard Module
PRODUCT SPECIFICATION
Revision 1.0.0
Initialized Document Date: March 06, 2009
Revision Document Date: March 06, 2009
This document contains confidential proprietary information and is the property of CyberTAN
Technology Inc.The contents of this document may not be disclosed to any unauthorized person
without the written consent of CyberTAN.
CyberTAN Technology inc.
Proprietary & Confidential Information
Product Specification of the WM141
No.99 PARK AVE. III, Science-based Industrial Park,
Hsin-Chu 308, Taiwan, R.O.C.
Phone (886) 3-577-7777
Fax (886) 3-577-7788
Table of Contents
DOCUMENT REVISION HISTORY....................................................................................................................................... 3
PRODUCT INTRODCUTION ................................................................................................................................................ 4
FEATURES............................................................................................................................................................................... 5
PRODUCT FEATURES............................................................................................................................................................ 6
4.1
RADIO SPECIFICATIONS ............................................................................................................................................ 6
4.2
DRIVER RELEASE PLAN ............................................................................................................................................... 7
4.3
CERTIFICATION/APPROVAL/WARRANTY (PRE-SCAN).......................................................................................... 8
COMPLIANT PTT APPROVAL ......................................................................................................................................... 9
WARRANTY ........................................................................................................................................................................... 9
CyberTAN Technology inc.
Proprietary & Confidential Information
Product Specification of the WM141
No.99 PARK AVE. III, Science-based Industrial Park,
Hsin-Chu 308, Taiwan, R.O.C.
Phone (886) 3-577-7777
Fax (886) 3-577-7788
1 DOCUMENT REVISION HISTORY
Revision
1.0.0
Date
Author
March 06, 2009 Bryan Chou
CyberTAN Technology inc.
Remark
Initialize.
Proprietary & Confidential Information
Product Specification of the WM141
No.99 PARK AVE. III, Science-based Industrial Park,
Hsin-Chu 308, Taiwan, R.O.C.
Phone (886) 3-577-7777
Fax (886) 3-577-7788
2 PRODUCT INTRODCUTION
The WM141 is a Draft IEEE802.11n-compatible half miniCard module in a 2x2 configuration and
operating in the 2.4GHz band.
This module allows an embedded host to use its PCI-E base 1.1
compatible interface to connect to a Draft IEEE802.11n compatible access point at unprecedented
speeds.
The WM141 half miniCard module is based on Atheros’s AR9283 chipset. It provides greater than
150Mbps real world throughput using high-speed spatial multiplexing modes. Configuration and testing of
this module must be done on the host via Broadcom provided software tools.
CyberTAN Technology inc.
Proprietary & Confidential Information
Product Specification of the WM141
No.99 PARK AVE. III, Science-based Industrial Park,
Hsin-Chu 308, Taiwan, R.O.C.
Phone (886) 3-577-7777
Fax (886) 3-577-7788
3 FEATURES
PCI-E v1.0 compatible.
miniCard connector to the host PCB’s needs.
Draft IEEE 802.11n version 2.0 compatible.
Backward compatible with IEEE 802.11b/g standards.
Wire-free access to networked resources from anywhere beyond the DUT.
Delivers data rate up to 270 Mbps.
802.11n: Dynamically shifts among 130, 117, 104, 78, 52, 39, 26 and 13Mbps in a 20MHz bandwidth
and 300, 270, 243, 216, 162, 108, 81, 54 and 27Mbps in a 40MHz bandwidth, based on signal strength,
for maximum availability and reliability of connection.
802.11b: Dynamically shifts among 11M, 5.5M, 2M, and 1 Mbps network speed, based on signal
strength, for maximum availability and reliability of connection.
˄˄́ʳ
˅˃ˠ˛̍ʳ˕˪ˍʳ˄ˆ˃ʿʳ˄˄ˊʿʳ˄˃ˇʿʳˊˋʿʳˈ˅ʿʳˆˌʿʳ˅ˉʿʳ˄ˆ˴́˷ʳˉˁˈˠ˵̃̆ʳ
ˇ˃ˠ˛̍ʳ˕˪ˍʳ˅ˊ˃ʿʳ˅ˇˆʿʳ˅˄ˉʿʳ˄ˉ˅ʿʳ˄˃ˋʿʳˋ˄ʿʳˈˇʿʳ˅ˊ˴́˷ʳ˄ˆˁˈˠ˵̃̆ʳ
ʳ
Uses 2.4GHz frequency band, which complies with worldwide non-license bands.
Ensures great security by providing the 64/128 bits Wired Equivalent Privacy (WEP) and WiFi Protected
Access
Protected Access (WPA) defined in the IEEE standard
CyberTAN Technology inc.
Proprietary & Confidential Information
Product Specification of the WM141
No.99 PARK AVE. III, Science-based Industrial Park,
Hsin-Chu 308, Taiwan, R.O.C.
Phone (886) 3-577-7777
Fax (886) 3-577-7788
4 PRODUCT FEATURES
4.1 RADIO SPECIFICATIONS
Solution Vendor Atheros 11b/g/n solution, AR9283
WLAN Standard Draft IEEE802.11n and 11b/g -compliant
North American
Operating
Frequency
Operating
Channels
Data Rate
Shifting
Modulation
Technique
2.412 - 2.462 GHz
Europe
Other domain
By request
11b Mode
1~11 for American; 1~13 for Europe (ETSI)
11g/n Mode
1~11 for American; 1~13 for Europe (ETSI)
Other domain
By request
11b/g Mode
54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2,1 Mbps
20MHz BW: 130, 117, 104, 78, 52, 39, 26, and 13Mbps (Ian to update)
11n Mode
40MHz BW: 270, 243, 216, 162, 108, 81, 54, and 27Mbps(Ian to
update)
11b Mode
CCK (5.5, 11Mbps), QPSK (2Mbps), BPSK (1Mbps)
11g/n Mode
OFDM (54, 48, 36, 24, 12, 9, 6Mbps)
Wireless
Distribution
System
AP mode only
Security
WEP
Support 64-bit & 128-bit Encryption, Passphrase, Manual key for Hex
TKIP
Required for Wi-Fi WPA stage 1 certificate
AES
Required for Wi-Fi WPA stage 2 certificate
WPA
Support both personal mode and enterprise mode
CyberTAN Technology inc.
Proprietary & Confidential Information
Product Specification of the WM141
No.99 PARK AVE. III, Science-based Industrial Park,
Hsin-Chu 308, Taiwan, R.O.C.
Phone (886) 3-577-7777
Fax (886) 3-577-7788
WPA2
Support both personal mode and enterprise mode
802.1x
EAP-MD5, EAP-TLS, EAP-TTLS
Support Wireless MAC address filtering
SSID broadcast enable/disable supported
QoS
WMM
Output Power
16 dBm +/- 1.5dBm (2.4GHz, 11Mbps, CCK)
Need to double
13.5 dBm +/- 1.5dBm (2.4GHz, 54Mbps. OFDM)(TBD)
check with
13.5 dBM +/- 1.5dBm ( 11 dBm +/-1.5)
Atheros
-60 dBm @ 270Mbps (1RX 11n OFDM with 40MHz BW, 10% PER)
-68 dBm @ 130Mbps (1RX 11n OFDM with 20MHz BW, 10% PER)
Receive
-70 dBm @ 54Mbps (1RX 11n OFDM, 10% PER)
Sensitivity
-70 dBm @ 54Mbps (1RX 11n OFDM, 10% PER)
-85 dBm @ 11Mbps (CCK, 10% PER)
Antenna
I-PEX connector * 2 (Detachable Antenna) ;2dbi
1.8dBi
LED
N/A
Coverage Area Indoor: 20M@54 Mbps, 35M@24Mbps, 60M@6Mbps, 100M@11 Mbps
Power
Consumption
Operation
requirements
TX Power consumption: < ?? mA
RX Power consumption: < ?? mA
Operating Temp. 0ºC to 40ºC (32ºF to 104ºF)
Storage Temp. –20ºC to 60ºC (-4ºF to 140ºF)
Operating Humidity 10% to 80% relative humidity,
Non-Condensing
Storage Humidity 5% to 90% Non-Condensing
Dimension
Weight (g)
Voltage
?? g
3.3V
4.2 DRIVER RELEASE PLAN
RTOS
CyberTAN Technology inc.
Utility Tools Release time
Driver Release Item
Proprietary & Confidential Information
Product Specification of the WM141
No.99 PARK AVE. III, Science-based Industrial Park,
Hsin-Chu 308, Taiwan, R.O.C.
Phone (886) 3-577-7777
Fax (886) 3-577-7788
Windows 2000
Windows XP
Linux
VxWorks
4.3 CERTIFICATION/APPROVAL/WARRANTY (Pre-Scan)
North America
FCC Part 15 Class A
European Union
EN55022 Class A
European Union
CE mark EN55024
EMI
EMS
CyberTAN Technology inc.
Proprietary & Confidential Information
Product Specification of the WM141
No.99 PARK AVE. III, Science-based Industrial Park,
Hsin-Chu 308, Taiwan, R.O.C.
Phone (886) 3-577-7777
Fax (886) 3-577-7788
COMPLIANT PTT APPROVAL
Supported by customer request: USA, CE
8 Warranty
One year limited warranty.
CyberTAN Technology inc.
Proprietary & Confidential Information
9. Warning statement
Federal Communication Commission Interference Statement
device has
is intended
onlyand
for found
OEM integrators
under
the following
conditions:
ThisThis
equipment
been tested
to comply with
the limits
for a Class
B digital device, pursuant to Part 15 of
1)
The
antenna
must
be
installed
such
that
20
cm
is
maintained
between
the antenna
users,interference
and
the FCC Rules. These limits are designed to provide reasonable protection
against and
harmful
in a
2)
The
transmitter
module
may
not
be
co-located
with
any
other
transmitter
or
antenna,
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
products market
in US,
OEM hasmay
to limit
the operation
channels into
CH1
to CH11
for 2.4G bandHowever,
by
and3)usedFor
in all
accordance
with the
instructions,
cause
harmful interference
radio
communications.
supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
Domain change.
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is
encouraged to try to correct the interference by one of the following measures:
still responsible for testing their end-product for any additional compliance requirements required with this module
installed (for example, digital device emissions, PC peripheral requirements, etc.).
- Reorient or relocate the receiving antenna.
- Increase
the separation
thethat
equipment
and receiver.
IMPORTANT
NOTE: Inbetween
the event
these conditions
can not be met (for example certain laptop configurations or
- Connect
the
equipment
into
an
outlet
on
circuit
different
from thatis no longer considered valid and the FCC ID can
co-location with another transmitter), then the FCC
authorization
to which
the
receiver
is
connected.
not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating
- Consult
the
dealer(including
or an experienced
radio/TV
technician
help.
the end
product
the transmitter)
and
obtainingfor
a separate
FCC authorization.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
End
Labeling
device may not cause harmful interference, and
(2)Product
this device
must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void
This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm
the user's authority to operate this equipment.
may be maintained between the antenna and users. The final end product must be labeled in a visible area with the
following: “Contains FCC ID: N89-WM140”.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure
limits setTo
forth
an User
uncontrolled environment. This equipment
Manual
Information
thefor
End
should be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The OEM
integrator
has to be
not to in
provide
information
to the end user
regarding1 how
to install
IEEE 802.11b
or 802.11g
operation
of aware
this product
the U.S.A.
is firmware-limited
to channels
through
11. or
This device is intended only for OEM integrators under the following conditions:
remove this
insuch
the user’s
manual
of the end product
integrates
module.
1) The antenna
mustRF
bemodule
installed
that 20
cm is maintained
betweenwhich
the antenna
andthis
users,
and
2) The transmitter module may not be co-located with any other transmitter or antenna,
3) For
products
marketshall
in US,
OEMall
has
to limit regulatory
the operation
channels in CH1 as
to CH11
forthis
2.4G
band by supplied
Theallend
user manual
include
required
information/warning
show in
manual.
firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain
change.
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still
responsible for testing their end-product for any additional compliance requirements required with this module installed
(for example, digital device emissions, PC peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions
not be
met (for example certain laptop configurations or
Industry can
Canada
Statement
co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not
be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end
product (including the transmitter) and obtaining a separate FCC authorization.
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two
conditions:
End Product
Labeling
1)
this
device
may
notwhere
causethe
interference
and be installed such that 20 cm may
This transmitter module is authorized only for use in device
antenna may
2) this device must accept any interference, including interference that may cause undesired operation of the
be maintained between the antenna and users. The final end product must be labeled in a visible area with the
device
following: “Contains FCC ID: N89-WM141”.
This device has been designed to operate with an antenna having a maximum gain of 1.8dBi.
Manual
Information
To the EndofUser
Antenna having a higher gain is strictly
prohibited
per regulations
Industry Canada. The required antenna
The OEM integrator has to be aware not to provide
information
to the
end user regarding how to install or remove this
impedance is 50
ohms.
RF module in the user's manual of the end product which integrates this module.
The end
user manual
shall
include
all required
regulatory
asits
show
this manual.
To reduce
potential
radio
interference
to other
users,information/warning
the antenna type and
gaininshould
be so chosen that the
EIRP is not more than required for successful communication.
Industry Canada Statement
Industry
Canada
Statement
This device complies with RSS-210 of the Industry
Canada
Rules.
Operation is subject to the following two conditions:
Thisdevice
devicemay
complies
with RSS-210
of the
Industry Canada Rules. Operation is subject to the following two conditions:
1) this
not cause
interference
and
NOTE:
1) thisincluding
deviceIMPORTANT
may
not cause
interference
andundesired operation of the device
2) this device must accept any interference,
interference
that
may cause
IC Radiation
Exposure Statement:
2) this device must accept any interference,
including interference
that may cause undesired operation of the device
complies
with IC with
radiation
exposure
limitsaset
forth for gain
an uncontrolled
This deviceThis
hasequipment
been designed
to operate
an antenna
having
maximum
of 1.8dBi. environment. This
should
be
and
operated
minimum
distance
20cm
radiator
& your body.
device
hasinstalled
designed
to operate
with
an antenna
having
abetween
maximum
gain
of 1.8dBi.
Antenna equipment
havingThis
a higher
gain
isbeen
strictly
prohibited
perwith
regulations
of
Industry
Canada.
The the
required
antenna
Antenna
impedance
is 50 having
ohms. a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna
impedance is 50 ohms.
This device is intended only for OEM integrators
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the EIRP is
reduce
potential
radio
interferencecommunication.
to other
users,
antenna conditions:
type and its gain should be so chosen that the EIRP is
under
thethe
following
notTomore
than
required
for successful
not more than required for successful communication.
The transmitter module may not be co-located with any other transmitter or antenna.
IMPORTANT NOTE:
IMPORTANT
NOTE:
As long as
conduction
above is met, further transmitter
test will
not be required. However, the OEM integrator is still
IC Radiation
Exposure
Statement:
IC
Radiation
Exposure
Statement:
responsible
for
testing
their
end-product
for
any
additional
compliance
requirements
required with
module
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment.
Thisthis
equipment
This equipment complies
radiation
exposure
limits
set forthPC
forperipheral
an uncontrolled
environment.
installedwith
(for IC
example,
digital
device
emissions,
requirements,
etc.). This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
should be installed and operated with minimum distance 20cm between the radiator & your body.
device is intended
for
OEM
integrators
This IMPORTANT
NOTE: Inonly
the event
that
these
met integrators
(for example certain laptop configurations or
This
device
isconditions
intendedcan
onlynot
forbeOEM
underco-location
the following
conditions:
with another transmitter), then
the the
IC authorization
is no longer considered valid and the IC ID can not
under
following conditions:
2/!Thebe
antenna
betransmitter
installed
thatmay
20 cm
between
the antenna
andor
users,
and
used onmust
the
final
product.such
In these
circumstances,
the OEM
will
be responsible
for
re-evaluating the
The
module
not is
bemaintained
co-located
withintegrator
any other
transmitter
antenna.
end
product
(including
the
transmitter)
and
obtaining
separate
IC
authorization.
3/!The
transmitter
module
may
not
be
co-located
with
any
other
transmitter
or
antenna,
As long as conduction above is met, further transmitter test will not be required. However, the OEM integrator is still
4/!For
all products
market
CANADA, OEM
has
to limit the
operation
channels in required
CH1 to CH11
for module
2.4GHzinstalled
band by(for
responsible
for testing
theirinend-product
for any
additional
compliance
requirements
with this
supplied firmware programming
tool.digital
OEM device
shall not
supply any
or info to
the end-useretc.).
regarding to Regulatory
example,
emissions,
PCtool
peripheral
requirements,
End Product Labeling
Domain change.
NOTE:
In
the
event
that
these
conditions
met
(for
example
certainTX
laptop
configurations
orstill
coAsIMPORTANT
long as
conditions
above
are
met,
further
transmitter
testnot
willbenot
be
required.
However,
the
integrator is
The final end product must be labeled in a visiblecan
area
with
the
following:
“Contains
IC :OEM
5005A-WM140”.
location with
then the
authorization
is no longerrequirements
considered valid
and the
IC this
ID can
not be
used on(for
responsible
foranother
testingtransmitter),
their end-product
forIC
any
additional compliance
required
with
module
installed
Manualthe
Information
That
Must
Included for re-evaluating the end product
the final
product.
these circumstances,
OEM integrator
will
bebe
responsible
example,
digital
deviceInemissions,
PC peripheral
requirements,
etc.).
(including
the transmitter)
andinformation
obtaining atoseparate
authorization.
The OEM integrator has
to be aware
not to provide
the end IC
user
regarding how to install or remove.
IMPORTANT NOTE:
In
the
event
that
these
conditions
can
not
be
met
(for
example
certain
configurations or coThis RF module in the user’s manual
of the end
product which integrates
thislaptop
module.
End Product
Labeling
location with another transmitter), then the IC authorization
is no
longer considered valid and the IC ID can not be used on
final user’s
end
product
must
be labeled
in a visible
area with
the
following:
“Contains
IC : 5005A-WM141”.
The
manual
for OEM
Integrators
must
include
following
information
inTX
a prominent
location
the final The
product.
In these
circumstances,
the OEM
integrator
willthe
be
responsible
for re-evaluating
the end
product
Manual
Information
That
Must
be
Included
“IMPORTANT
NOTE:
To
comply
with
FCC
RF
exposure
compliance
requirements.
The
antenna
must
not be
(including the transmitter) and obtaining a separate IC authorization.
or operating
conjunction
with any
other
or transmitter”.
The OEM integratorco-located
has to be aware
not to in
provide
information
to the
endantenna
user regarding
how to install or remove.
This RF module in the user's manual of the end product which integrates this module.
End Product Labeling
The user's manual for OEM Integrators must include the following information in a prominent location “IMPORTANT
The final end product must be labeled in a visible area with the following: “Contains TX IC : 5005A-WM141”.
NOTE: To comply with FCC RF exposure compliance requirements. The antenna must not be co-located or operating in
Manual Information That Must be Included
conjunction with any other antenna or transmitter”.
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove.
This RF module in the user's manual of the end product which integrates this module.
The user's manual for OEM Integrators must include the following information in a prominent location “IMPORTANT
NOTE: To comply with FCC RF exposure compliance requirements. The antenna must not be co-located or operating in
conjunction with any other antenna or transmitter”.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 8.0.0 (Windows)
Company                         : CyberTAN Technology Inc.
Source Modified                 : D:20100120142525
Create Date                     : 2010:01:25 09:49:53+08:00
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Modify Date                     : 2010:01:26 15:51:31+08:00
Metadata Date                   : 2010:01:26 15:51:31+08:00
Document ID                     : uuid:2bcb8028-e290-45d9-b638-839e21e9ac22
Instance ID                     : uuid:b8b98ec6-f32c-4719-bd16-6b2059ef7e5c
Version ID                      : 8
Format                          : application/pdf
Title                           : WD-615 Product Specification
Creator                         : William Wang, Bryan Chou
Subject                         : 
Headline                        : 
Page Count                      : 11
Author                          : William Wang, Bryan Chou

EXIF Metadata provided by EXIF.tools