D Link 2002080002-2 802.11 a/b/g PCI Adapter User Manual dwlag520 manual 0403

D Link Corporation 802.11 a/b/g PCI Adapter dwlag520 manual 0403

Internal antenna installation procedures to OEM

Download: D Link 2002080002-2 802.11 a/b/g PCI Adapter User Manual dwlag520 manual 0403
Mirror Download [FCC.gov]D Link 2002080002-2 802.11 a/b/g PCI Adapter User Manual dwlag520 manual 0403
Document ID322118
Application IDblkFICEkhbZteqObf9cSXA==
Document DescriptionInternal antenna installation procedures to OEM
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize10.61kB (132680 bits)
Date Submitted2003-04-30 00:00:00
Date Available2003-04-30 00:00:00
Creation Date2003-04-30 15:26:53
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2003-04-30 15:27:31
Document TitleMicrosoft Word - dwlag520_manual 0403.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Ben

DWL-AG520 Internal Antenna Installation
Before You Begin
•
Make sure to turn off your computer and unplug the power cord.
Remove the front plastic cover from the computer.
Identify an antenna installation location:
A. High on the metal front of the chassis.
B. Use a clearance area of 22x16x10mm which will not interfere with the plastic cover.
C. Less than 2cm from a 3x3mm, or larger, hole in the metal.
Carefully guide the antenna cable through the desired aperture
towards the PCI slots.
Verify proper clearance exists between the metal and front plastic
cover.
Pull the cable taut, expose the adhesive on the antenna, and affix
the antenna less than 2cm from the cable hole on the clean metal
surface.
Make sure to orient
the antenna so that
the writing on the
antenna is parallel
with the bottom of
the machine
Attach the antenna cable to the DWL-AG520 by gently pushing it
into the on-board connector.
Attach the antenna cable
Install the DWL-AG520 carefully and firmly seat it into an available
PCI slot (may require removing an existing bracket on the computer
back panel).
Secure the DWL-AG520 PCI bracket to the computer back panel.
Ensure the cable is clear of sharp corners or edges, away from
wide ribbon cables, and secure as needed.
Replace the computer front plastic cover.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2003:04:30 15:27:31-07:00
Create Date                     : 2003:04:30 15:26:53-07:00
Title                           : Microsoft Word - dwlag520_manual 0403.doc
Author                          : Ben
Creator                         : PScript5.dll Version 5.2
Producer                        : Acrobat Distiller 5.0 (Windows)
Page Count                      : 3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: KA22002080002-2

Navigation menu