D Link AP2330A1 Wireless N300 Single Band PoE Access Point User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2284350
Application ID	iS8YyA6uUW+HPQct4VCtXA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	193.65kB (2420572 bits)
Date Submitted	2014-06-03 00:00:00
Date Available	2014-06-03 00:00:00
Creation Date	2017-10-22 16:33:27
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-22 16:33:27
Document Title	User Manual
Document Creator	Infix PDF Printer
Document Author:	jill

Wireless N300
Single Band Gigabit PoE Access Point
User Manual
Table of Contents
Table of Contents
Product Overview......................................................................4
Introduction ................................................................................... 4
Features............................................................................................ 5
Package Contents......................................................................... 6
System Requirements ................................................................. 6
Hardware Overview ..................................................................7
LEDs ................................................................................................... 7
Connections ................................................................................... 7
Basic Installation........................................................................8
Hardware Setup ............................................................................ 8
Method 1 - PoE with PoE Switch ..................................... 8
Method 2 - PoE without PoE Switch or Router................9
Method 3 - No PoE..............................................................10
Web User Interface ................................................................. 11
Wireless ..........................................................................................12
Access Point Mode .............................................................12
WDS with AP Mode ............................................................14
WDS Mode ............................................................................16
Wireless Client Mode .........................................................18
Wireless Security .................................................................19
Wired Equivalent Privacy (WEP) ..............................19
Wi-Fi Protected Access (WPA / WPA2)....................20
802.1x Authentication.................................................22
LAN ..........................................................................................23
D-Link DAP-2330 User Manual
IPv6 ..........................................................................................24
Advanced Settings .....................................................................25
Performance .........................................................................26
Wireless Resource Control.......................................................28
Multi-SSID..............................................................................30
VLAN........................................................................................32
VLAN List ..........................................................................32
Port List.............................................................................33
Add/Edit VLAN ...............................................................34
PVID Settings ..................................................................35
Intrusion.................................................................................36
Schedule ................................................................................37
Internal RADIUS Server .....................................................38
ARP Spoofing Prevention ................................................39
Bandwidth Optimization .................................................40
AP Array..................................................................................42
AP Array Scan .................................................................42
Configuration Settings................................................43
Auto-RF.............................................................................47
Load Balance ..................................................................48
Captive Portal.......................................................................49
Authentication Settings - Passcode .......................49
Authentication Settings - User Name/Password50
Authentication Settings - Remote RADIUS..........51
Authentication Settings - LDAP...............................52
Authentication Settings - POP3...............................53
Table of Contents
Login Page Upload .......................................................54
Web Redirection............................................................55
DHCP Server .........................................................................56
Dynamic Pool Settings................................................56
Static Pool Setting ........................................................57
Current IP Mapping List..............................................58
Filters .......................................................................................59
Wireless MAC ACL .........................................................59
WLAN Partition ..............................................................60
Traffic Control...............................................................................61
Uplink/Downlink Setting .................................................61
QoS...........................................................................................62
Traffic Manager....................................................................63
Status ..............................................................................................64
Device Information ............................................................65
Client Information ..............................................................66
WDS Information Page .....................................................67
Channel Analyze .................................................................68
Stats Page ......................................................................................69
Ethernet Traffic Statistics..................................................69
WLAN Traffic Statistics.......................................................70
Log ...................................................................................................71
View Log.................................................................................71
Log Settings..........................................................................72
Maintenance Section ................................................................73
Administration.............................................................................74
Limit Administrator ............................................................74
System Name Settings ......................................................75
Login Settings ......................................................................75
D-Link DAP-2330 User Manual
Console Settings .................................................................75
SNMP Settings .....................................................................76
Administration.............................................................................77
Central WiFiManager Settings........................................77
Firmware and SSL Upload................................................78
Configuration File Upload ...............................................79
Time and Date Settings ....................................................80
Configuration and System.......................................................81
System Settings...........................................................................82
Help .................................................................................................83
Knowledge Base ..................................................................... 84
Wireless Basics .............................................................................84
Wireless Installation Considerations....................................85
Troubleshooting ..................................................................... 86
Why can’t I access the web-based configuration
utility? .....................................................................................86
What can I do if I forgot my password?.......................86
How to check your IP address? ......................................87
How to statically assign an IP address?.......................88
Technical Specifications ........................................................ 89
Antenna Pattern ..................................................................... 90
Contacting Technical Support.............................................. 91
Warranty................................................................................... 92
Registration ............................................................................. 98
Section 1 - Product Overview
Product Overview
Introduction
D-Link, an industry pioneer in wireless networking, introduces a solution for businesses seeking to deploy next generation 802.11n LANs. D-Link unveils
its new DAP-2330, designed specifically for environments with high traffic areas such as airports, coffee shops, shopping centers, sporting venues, and
school campuses to provide secure and manageable dual band wireless network options for network administrators.
Versatile Access Point
The DAP-2330 Access Point allows network administrators to deploy a highly manageable and extremely robust dual band wireless network. For
advanced installations, this new high-speed Access Point has integrated 802.3af Power over Ethernet (PoE) support, allowing installation of this device in
areas where power outlets are not readily available. In addition to bridging 802.11b/g/n wireless networks, the DAP-2330 can bridge to wired networks
with its integrated Gigabit (10/100/1000Mbps) Ethernet port.
Enhanced Performance
The DAP-2330 delivers reliable wireless performance with maximum wireless signal rates of up to 300Mbps. This, coupled with support for Wi-Fi
Multimedia™ (WMM) Quality of Service features, makes it an ideal access point for audio, video, and voice applications.
Security
To help maintain a secure wireless network, the DAP-2330 provides the latest in wireless security technologies by supporting both Personal and Enterprise
versions of WPA and WPA2 (802.11i) with support for RADIUS server back end. To further protect your wireless network, MAC Address Filtering, Wireless
LAN segmentation, Disable SSID Broadcast, Rogue AP Detection, and Wireless Broadcast Scheduling are also included.
* Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic,
building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.
D-Link DAP-2330 User Manual
Section 1 - Product Overview
Features
y Provide Ethernet to Wireless LAN bridge fully IEEE 802.3/u compatible on the Ethernet side and fully interoperable with IEEE 802.11b/g/n compliant
equipment
y Compatible with IEEE 802.11b high rate standard to provide wireless 11Mbps data rate*
y Compatible with IEEE 802.11g higher speed standard to provide wireless 54Mbps data rate*
y Compatible with IEEE 802.11n higher speed standard to provide wireless 300Mbps data rate*
y Operation at 2.4~2.5GHz frequency band to meet worldwide regulations
y Supports IEEE 802.11b/g/n wireless data encryption with 64/128-bit WEP for security
y Supports enhanced security – WPA-PSK and WPA2-PSK, RADIUS client, and Cipher negotiation
y Allows auto fallback data rate for reliability, optimized throughput and transmission range
y Web-based configuration and management
y Supports 802.3af PoE
y Supports 802.3az
y Supports one Gigabit Ethernet port
y AP Mode, WDS Mode, WDS with AP, and Wireless Client Mode
y Supports SNMP v1,v2,v3
y Support Trap server (SNMP v1, v2c)
y Support Central WiFiManager
y Support AP Array and AP Array Setup Tool
* Maximum wireless signal rate derived from IEEE Standard 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic,
building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.
D-Link DAP-2330 User Manual
Section 1 - Product Overview
Package Contents
•
•
•
•
•
•
DAP-2330 Access Point
Power Adapter
Mounting Plate and Hardware
Ethernet Cable
CD (with software and user manual)
Quick Installation Guide
Note: Using a power supply with a different voltage rating than the one included with the DAP-2330 will cause damage and void the warranty for this product.
System Requirements
y Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet Adapter
y Internet Explorer Version 11.0, Chrome 33, Safari 7, or Firefox 28 and above (for web-based configuration)
D-Link DAP-2330 User Manual
Section 1 - Product Overview
Hardware Overview
LEDs
Connections
Solid Red
Power/Status
Indicates the access point has
malfunctioned.
Blinking Red
This LED will blink during boot-up.
Solid Green
Indicates that the DAP-2330 is working
properly.
Blinking Green
This light will blink green during data
transmission.
D-Link DAP-2330 User Manual
Power Receptor
Connect the supplied power adapter.
LAN (PoE) Port
Connect to a Power over Ethernet (PoE) switch or router via
an Ethernet cable.
Reset Button
Press and hold for five seconds to reset the access point to
the factory default settings. Press and hold for one second
to reboot the access point.
Section 2 - Installation
Basic Installation
Hardware Setup
To power the access point, you can use one of the following 3 methods:
Method 1 - Use if you have a PoE switch or router.
Method 2 - Use if you do not have a PoE switch or router and do not have a power outlet near the location of the access point.
Method 3 - Use if you do not have a PoE switch or router and have a power outlet near the location of the access point.
Method 1 - PoE with PoE Switch
1. Connect one end of your Ethernet cable to the LAN (PoE) port on the access point.
2. Connect the other end into one port on a PoE switch.
DAP-2330
PoE Switch or Router
D-Link DAP-2330 User Manual
Section 2 - Installation
Method 2 - PoE without PoE Switch or Router
1. Connect one end of an Ethernet cable into the Data In port on the PoE base unit and the other end into one port on your switch, router, or computer.
2. Connect one end of an Ethernet cable into the P+Data Out port on the PoE base unit and the other end into the LAN (PoE) port on the Access Point.
3. Use the supplied power adapter. Connect the power adapter to the Power In receptor on the PoE adapter.
4. Connect the power cable to the power adapter and then connect the other end into a power outlet.
DAP-2330
PoE Base Unit
Power Adapter
PC
D-Link DAP-2330 User Manual
Switch or Router
Section 2 - Installation
Method 3 - No PoE
1. Connect one end of your Ethernet cable into the LAN (PoE) port and then connect the other end to a switch, router, or computer.
2. Use the supplied power adapter. Connect the power adapter to the Power receptor on the Access Point.
3. Connect the power cable to the power adapter and then connect the other end into a power outlet.
DAP-2330
Power Adapter
PC
D-Link DAP-2330 User Manual
Switch or Router
10
Section 3 - Configuration
Web User Interface
The supports an elaborate web user interface where the user can configure and monitor the device. Most of the configurable settings are located
in the left menu of the web GUI which contains section called Basic Settings, Advanced Settings and Status.
D-Link DAP-2330 User Manual
11
Section 3 - Configuration
Wireless
On the wireless settings page, you can setup the basic wireless configuration for the access point. The user can choose from 4 different wireless
modes:
Access Point - Used to create a wireless LAN
WDS with AP - Used to connect multiple wireless networks while still functioning as a wireless access point
WDS - Used to connect multiple wireless networks
Wireless Client - Used when the access point needs to act as a wireless network adapter for an Ethernet enabled device
Access Point Mode
Wireless Band: Select 2.4GHz in default.
Mode: Select Access Point from the drop-down menu.
Network Name (SSID): Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN).
The SSID’s factory default setting is dlink. The SSID
can be easily changed to connect to an existing
wireless network or to establish a new wireless
network. The SSID can be up to 32 characters and
is case-sensitive.
SSID Visibility: Select Enable to broadcast the SSID across the
network, thus making it visible to all network users.
Select Disable to hide the SSID from the network.
Auto Channel Selection: This feature when enabled automatically selects
the channel that provides the best wireless
performance. The channel selection process only
occurs when the AP is booting up. To manually
select a channel, set this option to Disable and
select a channel from the drop-down menu.
D-Link DAP-2330 User Manual
12
Section 3 - Configuration
Channel: To change the channel, first toggle the Auto Channel Selection setting to Disable, and then use the drop-down menu to make
the desired selection.
Note: The wireless adapters will automatically scan and match the wireless settings.
Channel Width: Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless
clients. Auto 20/40 MHz allows you to connect to both 802.11n and 802.11b/g wireless devices on your network.
Captive Profile: Disable or select a Captive Portal profile for Primary SSID.
Authentication: Use the drop-down menu to choose Open System, Shared Key, WPA-Personal, WPA-Enterprise, or 802.1x.
• Select Open System to communicate the key across the network (WEP).
• Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is
enabled, this option is not available.
• Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.
• Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server.
• Select 802.1X if your network is using port-based Network Access Control.
D-Link DAP-2330 User Manual
13
Section 3 - Configuration
WDS with AP Mode
Wireless Band: Select 2.4GHz in default.
Mode: WDS with AP mode is selected from the drop-down
menu.
Network Name (SSID): Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN).
The SSID’s factory default setting is dlink. The SSID
can be easily changed to connect to an existing
wireless network or to establish a new wireless
network.
SSID Visibility: Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Auto Channel Selection: Enabling this feature automatically selects
the channel that will provide the best wireless
performance. This feature is not supported in WDS
with AP mode. The channel selection process only
occurs when the AP is booting up.
Channel: All devices on the network must share the same
channel.To change the channel, use the drop-down
menu to make the desired selection. (Note: The
wireless adapters will automatically scan and match
the wireless settings.)
Channel Width: Allows you to select the channel width you would
like to operate in. Select 20 MHz if you are not using
any 802.11n wireless clients. Auto 20/40 MHz allows
you to connect to both 802.11n and 802.11b/g
wireless devices on your network.
D-Link DAP-2330 User Manual
14
Section 3 - Configuration
Captive Profile: Disable or select a Captive Portal profile.
Remote AP MAC Address: Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks.
Site Survey: Click on the Scan button to search for available wireless networks, then click on the available network that you want to
connect with.
Authentication: Use the drop-down menu to choose Open System, Shared Key, or WPA-Personal.
• Select Open System to communicate the key across the network.
• Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled,
this option is not available.
• Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.
D-Link DAP-2330 User Manual
15
Section 3 - Configuration
WDS Mode
Wireless Band: Select 2.4GHz in default.
Mode: WDS is selected from the drop-down menu.
Network Name (SSID): Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN).The
SSID’s factory default setting is dlink. The SSID can
be easily changed to connect to an existing wireless
network or to establish a new wireless network.
SSID Visibility: Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network, thus
making it visible to all network users.
Auto Channel Selection: Enabling this feature automatically selects
the channel that will provide the best wireless
performance. This feature is not supported in WDS
mode.
Channel: All devices on the network must share the same
channel.To change the channel, use the drop-down
menu to make the desired selection.
Channel Width: Use the drop-down menu to choose 20 MHz or
Auto 20/40 MHz.
Captive Profile: Disable in default.
Remote AP MAC Address: Enter the MAC addresses of the APs on your network
that will serve as bridges to wirelessly connect
multiple networks.
D-Link DAP-2330 User Manual
16
Section 3 - Configuration
Site Survey:
Click on the Scan button to search for available wireless networks, then click on the available network that you
want to connect with.
Authentication: Use the drop-down menu to choose Open System, Shared Key, or WPA-Personal.
• Select Open System to communicate the key across the network.
• Select Shared Key to limit communication to only those devices that share the same WEP settings.
• Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is
required.
D-Link DAP-2330 User Manual
17
Section 3 - Configuration
Wireless Client Mode
Wireless Band: Select 2.4GHz in default.
Mode: Wireless Client is selected from the drop-down menu.
Network Name (SSID): Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN). The
SSID’s factory default setting is dlink. The SSID can
be easily changed to connect to an existing wireless
network.
SSID Visibility: This option is unavailable in Wireless Client mode.
Auto Channel Selection: Enabling this feature automatically selects the channel
that will provide the best wireless performance. This
feature is not supported in Wireless Client mode.
Channel: The channel used will be displayed, and matches the
AP that the DAP-2330 is connected to when set to
Wireless Client mode.
Channel Width: Use the drop-down menu to choose 20 MHz or Auto
20/40 MHz.
Site Survey: Click on the Scan button to search for available
wireless networks, then click on the available network
that you want to connect with.
Captive Profile: Disable in default.
Authentication:
Will be explained in the next topic.
D-Link DAP-2330 User Manual
18
Section 3 - Configuration
Wireless Security
Wireless security is a key concern for any wireless network installed. Unlike any other networking method wireless networks will broadcast it’s presence for
anyone to connect to it. Today, wireless security has advanced to a level where it is virtually impenetrable.
There are mainly two forms of wireless encryption and they are called Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA). WEP was the first
security method developed. It is a low level encryption but better than now encryption. WPA is the newest encryption standard and with the advanced WPA2
standard wireless networks have finally reach a point where the security is strong enough to give users the peace of mind when installing wireless networks.
Wired Equivalent Privacy (WEP)
WEP provides two variations called Open System and Shared Key.
Open System will send a request to the access point and if the key used matches the one configured on the access point, the access point will return a success
message back to the wireless client. If the key does not match the one configured on the access point, the access point will deny the connection request from
the wireless client.
Shared Key will send a request to the access point and if the key used matches the one configured on the access point, the access point will send a challenge
to the client. The client will then again send a confirmation of the same key back to the access point where the access point will either return a successful or a
denial packet back to the wireless client.
Encryption: Use the radio button to disable or enable
encryption.
Key Type*: Select HEX or ASCII.
Key Size: Select 64 Bits or 128 Bits.
Key Index (1-4): Select the 1st through the 4th key to be the active
key.
Key: Input up to four keys for encryption. You will select
one of these keys in the Key Index drop-down
menu.
**Hexadecimal (HEX) digits consist of the numbers 0-9 and the letters A-F.
*ASCII (American Standard Code for Information Interchange) is a code that represents English letters using
numbers ranging from 0-127.
D-Link DAP-2330 User Manual
19
Section 3 - Configuration
Wi-Fi Protected Access (WPA / WPA2)
WPA was created by the Wi-Fi Alliance to address the limitations and weaknesses found in WEP. This protocol is mainly based on the 802.11i
standard. There are also two variations found in WPA called WPA-Personal (PSK) and WPA-Enterprise (EAP).
WPA-EAP requires the user to install a Radius Server on the network for authentication.
WPA-Personal does not require the user to install a Radius Server on the network.
Comparing WPA-PSK with WPA-EAP, WPA-PSK is seen as a weaker authentication but comparing WPA-PSK to WEP, WPA-PSK is far more secure
than WEP. WPA-EAP is the highest level of wireless security a user can use for wireless today.
WPA2 is an upgrade of WPA. WPA2 yet again solves some possible security issues found in WPA. WPA2 has two variations called WPA2-Personal
(PSK) and WPA2-Enterprise (EAP) which is the same as found with WPA.
WPA Mode: When WPA-Personal is selected for Authentication type,
you must also select a WPA mode from the drop-down
menu: AUTO (WPA or WPA2), WPA2 Only, or WPA Only.
WPA and WPA2 use different algorithms. AUTO (WPA or
WPA2) allows you to use both WPA and WPA2.
Cipher Type: When you selectWPA-Personal, you must also select AUTO,
AES, or TKIP from the pull down menu.
Group Key Update: Select the interval during which the group key will be valid.
The default value of 1800 is recommended.
Pass Phrase: When you select WPA-Personal, please enter a Pass Phrase
in the corresponding field.
D-Link DAP-2330 User Manual
20
Section 3 - Configuration
WPA Mode: When WPA-Enterprise is selected, you must also
select a WPA mode from the drop-down menu:
AUTO (WPA or WPA2), WPA2 Only, or WPA Only.
WPA and WPA2 use different algorithms. AUTO
(WPA or WPA2) allows you to use both WPA and
WPA2.
Cipher Type: When WPA-Enterprise is selected, you must also
select a cipher type from the drop-down menu:
Auto, AES, or TKIP.
Group Key Update Interval: Select the interval during which the group key
will be valid. 1800 is the recommended value as
a lower interval may reduce data transfer rates.
Network Access Protection: Enable or disable Microsoft Network Access
Protection.
RADIUS Server: Enter the IP address of the RADIUS server.
RADIUS Port: Enter the RADIUS port.
RADIUS Secret: Enter the RADIUS secret.
Account Server: Enter the IP address of the Account Server
Account Port: Enter the Account port
Account Secret: Enter the Account secret
D-Link DAP-2330 User Manual
21
Section 3 - Configuration
802.1x Authentication
Key Update Interval : Select the interval during which the group key will be valid
(300 is the recommended value). A lower interval may
reduce data transfer rates.
RADIUS Server Mode : Select External or Internal RADIUS server
RADIUS Server: Enter the IP address of the RADIUS server.
RADIUS Port : Enter the RADIUS port.
RADIUS Secret: Enter the RADIUS secret.
Account Server: Enter the IP address of the Account Server
Account Port: Enter the Account port
Account Secret: Enter the Account secret
D-Link DAP-2330 User Manual
22
Section 3 - Configuration
LAN
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DAP-2330.
These settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal
network and cannot be seen on the Internet.
Get IP From: Static IP (Manual) is chosen here. Choose this option if
you do not have a DHCP server in your network, or if you
wish to assign a static IP address to the DAP-2330. When
Dynamic IP (DHCP) is selected, the other fields here will
be grayed out. Please allow about 2 minutes for the DHCP
client to be functional once this selection is made.
IP Address: The default IP address is 192.168.0.50. Assign a static
IP address that is within the IP address range of your
network.
Subnet Mask: Enter the subnet mask. All devices in the network must
share the same subnet mask.
Default Gateway: Enter the IP address of the gateway/router in your
network.
DNS: Enter a DNS server IP address. This is usually the local IP
address of your gateway/router.
D-Link DAP-2330 User Manual
23
Section 3 - Configuration
IPv6
Enable IPv6: Check to enable the IPv6
Get IP From: Auto is chosen here. Choose this option the
DAP-2330 can get IPv6 address automatically
or use Static to set IPv6 address manually.
When Auto is selected, the other fields here will be grayed
out.
IP Address: Enter the LAN IPv6 address used here.
Prefix: Enter the LAN subnet prefix length value used here.
Default Gateway: Enter the LAN default gateway IPv6 address used here.
D-Link DAP-2330 User Manual
24
Section 3 - Configuration
Advanced Settings
In the Advanced Settings Section the user can configure advanced settings concerning Performance, Multiple SSID, VLAN, Security, Quality of Service, AP
Array, Web Redirection, DHCP Server, Filters and Scheduling. The following pages will explain settings found in the Advanced Settings section in more detail.
D-Link DAP-2330 User Manual
25
Section 3 - Configuration
Performance
On the Performance Settings page the users can configure more advanced settings concerning the wireless signal and hosting.
Wireless Band: Select 2.4Ghz in default.
Wireless: Use the drop-down menu to turn the wireless function On or Off.
Wireless Mode: The different combination of clients that can be supported include
Mixed 802.11n, 802.11g and 802.11b, Mixed 802.11g and 802.11b and
802.11n Only in the 2.4 GHz band Please note that when backwards
compatibility is enabled for legacy (802.11g/b) clients, degradation
of 802.11n wireless performance is expected.
Indicate the base transfer rate of wireless adapters on the wireless
LAN. The AP will adjust the base transfer rate depending on the base
Data Rate*: rate of the connected device. If there are obstacles or interference, the
AP will step down the rate. This option is enabled in Mixed 802.11g
and 802.11b mode (for 2.4 GHz). The choices available are Best (Up
to 54), 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2 or 1 for 2.4 GHz.
Beacons are packets sent by an access point to synchronize a
wireless network. Specify a value in milliseconds. The default (100)
is recommended. Setting a higher beacon interval can help to save
the power of wireless clients, while setting a lower one can help a
Beacon Interval (25-500): wireless client connect to an access point faster.
DTM Interval (1-15): Select a Delivery Traffic Indication Message setting between 1 and 15. 1 is the default setting. DTIM is a countdown informing
clients of the next window for listening to broadcast and multicast messages.
D-Link DAP-2330 User Manual
26
Section 3 - Configuration
Transmit Power: This setting determines the power level of the wireless transmission. Transmitting power can be adjusted to eliminate overlapping
of wireless area coverage between two access points where interference is a major concern. For example, if wireless coverage is
intended for half of the area, then select 50% as the option. Use the drop-down menu to select 100%, 50%, 25%, or 12.5%.
WMM (Wi-Fi Multimedia): WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio and video applications over
a Wi-Fi network.
Ack Time Out To effectively optimize throughput over long distance links enter a value for Acknowledgement Time Out between 64 to 200
(2.4 GHZ, 64~200): microseconds in the 2.4 GHz in the field provided.
Short GI: Select Enable or Disable. Enabling a short guard interval can increase throughput. However, be aware that it can also increase
the error rate in some installations due to increased sensitivity to radio-frequency installations.
IGMP Snooping: Select Enable or Disable. Internet Group Management Protocol allows the AP to recognize IGMP queries and reports sent between
routers and an IGMP host (wireless STA). When IGMP snooping is enabled, the AP will forward multicast packets to an IGMP host
based on IGMP messages passing through the AP.
Multicast Bandwidth Adjust the multicast packet data rate here. The multicast rate is supported in AP mode, and WDS
Control : with AP mode, including Multi-SSIDs
HT20/40 Coexistence : Enable this option to reduce interference from other wireless networks in your area. If the channel width is operating at 40MHz
and there is another wireless network’s channel over-lapping and causing interference, the Access Point will automatically change
to 20MHz
D-Link DAP-2330 User Manual
27
Section 3 - Configuration
Wireless Resource Control
The Wireless Resource Control window is used to configure the wireless connection settings so that the device can detect the better wireless
connection in your environment.
Wireless band: Select 2.4GHz in default.
Connection Limit: Select Enable or Disable. This is an option for load
balancing. This determines whether to limit the number of users accessing this device. The exact number
is entered in the User Limit field below. This feature
allows the user to share the wireless network traffic
and the client using multiple APs. If this function is
enabled and when the number of users exceeds this
value, or the network utilization of this AP exceeds
the percentage that has been specified, the DAP2330 will not allow clients to associate with the AP.
User Limit: Set the maximum amount of users that are allowed
access (zero to 64 users) to the device using the
specified wireless band. The default setting is 20.
11n Preferred: Use the drop-down menu to Enable the 11n Preferred function. The wireless clients with 802.11n
protocol will have higher priority to connect to the
device.
Network Utilization: Set the maximum utilization of this access point for service. The DAP-2330 will not allow any new clients to associate
with the AP if the utilization exceeds the value the user specifies. Select a utilization percentage between 100%, 80%,
60%, 40%, 20%, or 0%. When this network utilization threshold is reached, the device will pause one minute to allow network congestion to dissipate.
Aging out: Use the drop-down menu to select the criteria of disconnecting the wireless clients. Available options are RSSI and Data
Rate.
D-Link DAP-2330 User Manual
28
Section 3 - Configuration
RSSI Threshold: When RSSI is selected in the Aging out drop-down menu, select the percentage of RSSI here. When the RSSI of wireless
clients is lower than the specified percentage, the device disconnects the wireless clients.
Data Rate Threshold: When Data Rate is selected in the Aging out drop-down menu, select the threshold of data rate here. When the data
rate of wireless clients is lower than the specified number, the device disconnects the wireless clients.
ACL RSSI: Use the drop-down menu to Enable the function. When enabled, the device denies the connection request from the
wireless clients with the RSSI lower than the specified threshold below.
ACL RSSI Threshold: Set the ACL RSSI Threshold.
D-Link DAP-2330 User Manual
29
Section 3 - Configuration
Multi-SSID
The device supports up to four multiple Service Set Identifiers. You can set the Primary SSID in the Basic > Wireless section. The SSID’s factory
default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network.
Enable Multi-SSID: Check to enable support for multiple SSIDs.
Band: Select 2.4GHz in default.
Index: You can select up to three multi-SSIDs. With the Primary
SSID, you have a total of four multi-SSIDs.
SSID: Service Set Identifier (SSID) is the name designated for a
specific wireless local area network (WLAN). The SSID’s
factory default setting is dlink. The SSID can be easily
changed to connect to an existing wireless network or to
establish a new wireless network.
SSID Visibility: Enable or Disable SSID visibility. Enabling this feature
broadcasts the SSID across the network, thus making it
visible to all network users.
Security: The Multi-SSID security can be Open System, WPAPersonal, or WPA-Enterprise. For a detailed description of
the Open System parameters please go to page 23. For
a detailed description of the WPA-Personal parameters
please go to page 24. For a detailed description of the
WPA-Enterprise parameters please go to page 25.
Priority: Select the priority level of the SSID selected.
WMM (Wi-Fi WMM stands for Wi-Fi Multimedia. Enabling this feature
Multimedia): will improve the user experience for audio and video
applications over a Wi-Fi network.
Captive Profile: Enableordisable captiveportprofileforuserauthentication.
D-Link DAP-2330 User Manual
30
Section 3 - Configuration
Encryption: When you select Open System, toggle between Enable and Disable. If Enable is selected, the Key Type, Key Size, Key Index
(1~4), Key, and Confirm Keys must also be configured.
Key Type: Select HEX or ASCII.
Key Size: Select 64-bit or 128-bit.
Key Index (1-4): Select from the 1st to 4th key to be set as the active key.
Key: Input up to four keys for encryption. You will select one of these keys in the Key Index drop-down menu.
WPA Mode: When you select either WPA-Personal or WPA-Enterprise, you must also choose a WPA mode from the drop-down menu: AUTO
(WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2) allows you to use both
WPA and WPA2. In addition, you must configure Cipher Type, and Group Key Update Interval.
Cipher Type: Select Auto, AES, or TKIP from the drop-down menu.
Group Key Update Interval: Select the interval during which the group key will be valid. The default value of 1800 seconds is recommended.
Pass Phrase: When you select WPA-Personal, please enter a Pass Phrase in the corresponding field.
Confirm Pass Phrase: When you select WPA-Personal, please re-enter the Pass Phrase entered in the previous item in the corresponding field.
RADIUS Server: When you select WPA-Enterprise, enter the IP address of the RADIUS server. In addition, you must configure RADIUS Port and
RADIUS Secret.
RADIUS Port: Enter the RADIUS port.
RADIUS Secret: Enter the RADIUS secret.
D-Link DAP-2330 User Manual
31
Section 3 - Configuration
VLAN
VLAN List
The DAP-2330 supports VLANs. VLANs can be created with a Name and VID. Mgmt (TCP stack), LAN, Primary/Multiple SSID, and WDS connection
can be assigned to VLANs as they are physical ports. Any packet which enters the DAP-2330 without a VLAN tag will have a VLAN tag inserted
with a PVID. The VLAN List tab displays the current VLANs.
VLAN Status: Use the radio button to toggle to Enable. Next,
go to the Add/Edit VLAN tab to add or modify
an item on the VLAN List tab.
VLAN Mode: The current VLAN mode is displayed.
D-Link DAP-2330 User Manual
32
Section 3 - Configuration
Port List
The Port List tab displays the current ports. If you want to configure the guest and internal networks on a Virtual LAN (VLAN), the switch and
DHCP server you are using must also support VLANs. As a prerequisite step, configure a port on the switch for handling VLAN tagged packets as
described in the IEEE 802.1Q standard.
VLAN Status: Use the radio button to toggle to Enable. Next, go to the Add/Edit
VLAN tab to add or modify an item on the VLAN List tab.
Port Name: The name of the port is displayed in this column.
Tag VID: The Tagged VID is displayed in this column.
Untag VID: The Untagged VID is displayed in this column.
PVID: The Port VLAN Identifier is displayed in this column.
D-Link DAP-2330 User Manual
33
Section 3 - Configuration
Add/Edit VLAN
The Add/Edit VLAN tab is used to configure VLANs. Once you have made the desired changes, click the Save button to let your changes take
effect.
VLAN Status: Use the radio button to toggle to Enable.
VLAN ID: Provide a number between 1 and 4094
for the Internal VLAN.
VLAN Name: Enter the VLAN to add or modify.
D-Link DAP-2330 User Manual
34
Section 3 - Configuration
PVID Settings
The PVID Setting tab is used to enable/disable the Port VLAN Identifier Auto Assign Status as well as to configure various types of PVID settings.
Click the Save button to let your changes take effect.
VLAN Status: Use the radio button to toggle between
Enable and Disable.
PVID Auto Assign Status:
D-Link DAP-2330 User Manual
Use the radio button to toggle PVID auto
assign status to Enable.
35
Section 3 - Configuration
Intrusion
The Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Save button to let your changes
take effect.
Wireless Band: Select 2.4GHz in default.
AP List: The choices include All, Valid, Neighbor,
Rogue, and New.
Detect: Click this button to initiate a scan of the
network.
D-Link DAP-2330 User Manual
36
Section 3 - Configuration
Schedule
The Wireless Schedule Settings window is used to add and modify scheduling rules on the device. Click the Save button to let your changes take
effect.
Wireless Schedule: Use the drop-down menu to enable the device’s
scheduling feature.
Name: Enter a name for the new scheduling rule in the field
provided.
Index: Use the drop-down menu to select the desired SSID.
SSID: This read-only field indicates the current SSID in use. To
create a new SSID, go to the Wireless Settings window
(Basic Settings > Wireless).
Day(s): Toggle the radio button between All Week and Select
Day(s). If the second option is selected, check the
specific days you want the rule to be effective on.
All Day(s): Check this box to have your settings apply 24 hours
a day.
Start Time: Enter the beginning hour and minute, using a 24-hour
clock.
End Time: Enter the ending hour and minute, using a 24-hour
clock.
D-Link DAP-2330 User Manual
37
Section 3 - Configuration
Internal RADIUS Server
The DAP-2330 features a built-in RADIUS server. Once you have finished adding a RADIUS account, click the Save button to let your changes take
effect. The newly-created account will appear in this RADIUS Account List. The radio buttons allow the user to enable or disable the RADIUS account.
Click the icon in the delete column to remove the RADIUS account. We suggest you limit the number of accounts below 30.
User Name: Enter a name to authenticate user access to the
internal RADIUS server.
Password: Enter a password to authenticate user access to the
internal RADIUS server. The length of your password
should be 8~64.
Status: Toggle the drop-down menu between Enable and
Disable.
RADIUS Account List: Displays the list of users.
D-Link DAP-2330 User Manual
38
Section 3 - Configuration
ARP Spoofing Prevention
The ARP Spoofing Prevention feature allows users to add IP/MAC address mapping to prevent arp spoofing attack.
ARP Spoofing Prevention: This check box allows you to enable the arp
spoofing prevention function.
Gateway IP Address: Enter a gateway IP address.
Gateway MAC Address: Enter a gateway MAC address.
D-Link DAP-2330 User Manual
39
Section 3 - Configuration
Bandwidth Optimization
The Bandwidth Optimization window allows the user to manage the bandwidth of the device and arrange the bandwidth for various wireless clients.
When the Bandwidth Optimization ruile is finished, click the Add button. To discard the Add Bandwidth Optimization Rule settings, click the Clear
button. Click the Save button to let your changes take effect.
Enable Bandwidth Usethedrop-downmenutoEnabletheBandwidth
Optimization: Optimization function.
Downlink Bandwidth:
Enter the downlink bandwidth of the device in
Mbits per second.
Uplink Bandwidth:
Enter the uplink bandwidth of the device in Mbits
per second.
Allocate average BW
for each station:
AP will distribute average bandwidth for each
client.
Allocate maximum BW
for each station:
Specify the maximum bandwidth for each
connected client. Reserve certain bandwidth for
future clients.
Allocate different BW The weight of 11b/g/n client are 10%/20%/70% ;
for b/g/n stations: 20%/80%. AP will distribute different bandwidth
for 11b/g/n clients.
Allocate specific BW
for SSID:
All clients share the total bandwidth.
Rule Type: Use the drop-down menu to select the type
that is applied to the rule. Available options are:
Allocate average BW for each station, Allocate
maximum BW for each station, Allocate
different BW for 11 b/g/n stations, and Allocte
specific BW for SSID.
D-Link DAP-2330 User Manual
40
Section 3 - Configuration
Band: Use the drop-down menu to toggle the wireless band between 2.4GHz.
SSID Index: Use the drop-down menu to select the SSID for the specified wireless band.
Downlink Speed: Enter the limitation of the downloading speed in either Kbits/sec or Mbits/sec for the rule.
Uplink Speed: Enter the limitation of the uploading speed in either Kbits/sec or Mbits/sec for the rule.
D-Link DAP-2330 User Manual
41
Section 3 - Configuration
AP Array
AP Array Scan
The AP Array window is used to create up to 32 APs on a local network to be organized into a single group in order to increase ease of management.
Click the Save button to let your changes take effect. Central WiFiManager and AP Array are mutually exclusive functions.
Enable AP Array: Select the check box to enable the AP array
function. The three modes that are available are
Master, Backup Master, and Slave. APs in the
same array will use the same configuration. The
configuration will sync the Master AP to the Slave
AP and the Backup Master AP when a Slave AP and
a Backup Master AP join the AP array.
AP Array Name: Enter an AP array name for the group here.
AP Array Password:
Enter an AP array password for the group here.
This password must be the same on all the APs
in the group.
Scan AP Array List: Click this button to initiate a scan of all the
available APs currently on the network.
Connection Status: Display the AP array connection status.
AP Array List: This table displays the current AP array status for
the following parameters: Array Name, Master
IP, MAC, Master, Backup Master, Slave, and Total.
Current Members: This table displays all the current array members.
The DAP-2330 AP array feature supports up to
eight AP array members.
D-Link DAP-2330 User Manual
42
Section 3 - Configuration
Configuration Settings
In the AP array configuration settings windows, users can specify which settings all the APs in the group will inherit from the master AP. Make the
required selection in this window and click the Save button to accept the changes made.
Enable AP Array Select to Enable or Disable the AP array configure
Configuration: feature here.
Wireless Basic Select this option to specify the basic wireless
Settings: settings that the APs in the group will inherit.
Wireless Advanced Select this option to specify the advanced wireless
Settings: settings that the APs in the group will inherit.
Multiple SSID & VLAN: Select this option to specify the multiple SSIDs
and VLAN settings that the APs in the group will
inherit.
Advanced Functions: Select this option to specify the other advanced
settings that the APs in the group will inherit.
Administration Select this option to specify the administrative
Settings: settings that the APs in the group will inherit.
D-Link DAP-2330 User Manual
43
Section 3 - Configuration
Wireless Basic Settings
Network Name (SSID): Select this option to use the same SSID.
SSID Visibility: Select this option to enable SSID visibility.
Auto Channel Selection: Select this option to use auto channel selection.
Channel Width: Select this option to use the same channel width.
Security: Select this option to use the same wireless security.
Captive Profile: Select this option to use the same captive profile settings.
Band: Select this option to use the same wireless band.
Wireless Advanced Settings
Wireless: Select this option to use the same wireless
settings.
Wireless Mode: Select this option to use the same wireless mode.
Data Rate: Select this option to use the same data rate.
Beacon Interval: Select this option to use the same beacon interval.
DTIM Interval: Select this option to use the same DTIM interval.
Transmit Power: Select this option to use the same transmit power.
WMM (Wi-Fi Select this option to use the same WMM settings.
Multimedia):
Ack Time Out: Select this option to use the same ACK timeout value.
Wireless ACL: Select this option to use the same wireless ACL settings.
D-Link DAP-2330 User Manual
44
Section 3 - Configuration
Short GI: Select this option to use the same short GI settings. Select
Link Integrity: this option to use the same link integrity settings. Select
Connection Limit: this option to use the same connection limit value.
IGMP Snooping:: Select this option to use the same IGMP snooping settings.
Multiple SSID & VLAN
SSID: Select this option to use the same multi-SSIDs.
SSID Visibility: Select this option to use the same SSID visible.
Security: Select this option to use the same wireless security
settings.
WMM: Select this option to use the same WMM settings.
Captive Profile: Select this option to use the same captive profile settings.
VLAN: Select this option to use the same VLAN settings.
Advanced Functions
Schedule Settings: Select this option to use the same schedule
settings.
QoS Settings: Select this option to use the same Quality of
Service settings.
Log Settings: Select this option to use the same log settings.
Time and Date Settings: Select this option to use the same time and date
settings.
D-Link DAP-2330 User Manual
45
Section 3 - Configuration
ARP Spoofing Select this option to use the same ARP spoofing prevention settings.
Prevention:
Bandwidth Select this option to use the same bandwidth optimization settings.
Optimization:
Captive Portal: Select this option to use the same captive portal settings.
Auto RF: Select this option to use the same auto-RF settings.
Load Balance: Select this option to use the same load balancing settings.
DHCP Server Settings: Select this option to use the same DHCP server settings.
Administration Settings
System Name Settings: Select this option to use the same system name.
SNMP Settings: Select this option to use the same SNMP settings.
Login Settings: Select this option to use the same login settings.
Console Settings: Select this option to use the same console settings.
Limit Administrator: Select this option to use the same limit administrator settings.
Ping Control Setting: Select this option to use the same ping control settings.
D-Link DAP-2330 User Manual
46
Section 3 - Configuration
Auto-RF
In this windows, users can view and configure the automatic radio frequency settings as well as configure the the auto-initiate period and threshold
values. Click the Save button to accept the changes made.
Enable: Auto-RF: Select to Enable or Disable the auto-RF feature
here.
Initiate Auto-RF: Click the Auto-RF Optimize button to initiate the
auto-RF optimization feature.
Auto-Initiate: Select the Enable or Disable the auto-initiate
feature here.
Auto-Initiate Period: After enabling the auto-initiate option, the autoinitiate period value can be entered here. This
value must be between 1 and 24 hours.
RSSI Threshold: Select the RSSI threshold value here. This value is
listed in the drop-down menu in increments of
10% from 10% to 100%.
RF Report Frequency: Enter the RF report frequency value here.
D-Link DAP-2330 User Manual
47
Section 3 - Configuration
Load Balance
In this window, users can view and configure the AP array’s load balancing settings. Click the Save button to accept the changes made.
Enable Load Balance:
Select to Enable or Disable the load balance
feature here.
Active Threshold: Enter the active threshold value here.
D-Link DAP-2330 User Manual
48
Section 3 - Configuration
Captive Portal
Authentication Settings - Passcode
The Captive Portal is a built-in web authentication server. When a station connects to an AP, the web brower will be redirected to a web authentication
page. In this windows, user can view and configure the Captive Portal settings. Click the Add button to add a new entry. Click the Delete or Delete
All button to remove a specific entry or all the entries configured.
Encryption Type: Select the captive portal encryption type here.
Options to choose from are Passcode, User
Name/Password, Remote RADIUS, LDAP and
POP3. In this section we’ll discuss the Passcode
option.
Passcode Quantity: Enter the number of Passcode that will be used
here.
Duration: Enter the duration value, in hours, for this
Passcode.
Last Active Day: Select the last active date for this Passcode here.
Year, Month and Day selections can be made.
User Limit: Enter the maximum amount of users that can use
this Passcode at the same time.
D-Link DAP-2330 User Manual
49
Section 3 - Configuration
Authentication Settings - User Name/Password
Encryption Type: Select the captive portal encryption type here.
Options to choose from are Passcode, User
Name/Password, Remote RADIUS, LDAP and
POP3. In this section we’ll discuss the User Name/
Password option.
Restricted Subnets: Enter the restricted subnets here. Access to these
subnets will denied to guest accounts. Up to four
restricted subnet entries can be defined.
Username: Enter the username for the new account here.
Password: Enter the password for the new account here.
Group: Select the group for the new account here.
Options to choose from are Manager and Guest.
Guest accounts will have limited access.
D-Link DAP-2330 User Manual
50
Section 3 - Configuration
Authentication Settings - Remote RADIUS
Encryption Type: Select the captive portal encryption type here.
Options to choose from are Passcode, User
Name/Password, Remote RADIUS, LDAP and
POP3. In this section we’ll discuss the Remote
RADIUS option.
Remote RADIUS Type: Select the remote RADIUS server type here.
Currently, only SPAP will be used.
RADIUS Server: Enter the RADIUS server’s IP address here. Enter
RADIUS Port: the RADIUS server’s port number here. Enter the
RADIUS Secret: RADIUS server’s shared secret here. Select to
Accounting Mode: Enable or Disable the accounting mode
here.
Accounting Server: Enter the accounting server’s IP address here.
Accounting Port: Enter the accounting server’s port number here.
Accounting Secret: Enter the accounting server’s shared serect here.
D-Link DAP-2330 User Manual
51
Section 3 - Configuration
Authentication Settings - LDAP
Encryption Type: Select the captive portal encryption type here.
Options to choose from are Passode, User Name/
Password, Remote RADIUS, LDAP and POP3. In
this section we’ll discuss the LDAP option.
Server: Enter the LDAP server’s IP address or domain
name here.
Port: Enter the LDAP server’s port number here.
Authenticate Mode: Select the authentication mode here. Options to
choose from are Simple and TLS.
Username: Enter the LDAP server account’s username here.
Password: Enter the LDAP server account’s password here.
Base DN: Enter the administrator’s domain name here.
Account Attribute: Enter the LDAP account attribute string here. This
string will be used to search for clients.
Identity: Enter the identity ’s full path string here.
Alternatively, select the Auto Copy checkbox to
automatically add the generic full path of the web
page in the identity field.
D-Link DAP-2330 User Manual
52
Section 3 - Configuration
Authentication Settings - POP3
Encryption Type: Select the captive portal encryption type here.
Options to choose from are Passode, User Name/
Password, Remote RADIUS, LDAP and POP3.
In this section we’ll discuss the Passcode option.
Server: Enter the POP3 server’s IP address or domain
name here.
Port: Enter the POP server’s port number here.
Connection Type: Select the connection type here. Options to
choose from are None and SSL/TLS.
D-Link DAP-2330 User Manual
53
Section 3 - Configuration
Login Page Upload
In this window, users can upload a custom login page picture that will be used by the captive portal feature. Click the Browse button to navigate
to the image file, located on the managing computer and then click the Upload button to initiate the upload.
Upload picture from In this field the path to the image file, that will be
file: uploaded, will be displayed. Alternatively, the path
can be manually entered here.
D-Link DAP-2330 User Manual
54
Section 3 - Configuration
Web Redirection
In this windows, users can view and configure the Web redirection settings for the captive portal hosted by this access point. Wireless clients will
be redirected to this web site prior and after authentication. Click the Save button to accept the changes made.
Web Redirection: Select this checkbox to enable theWeb redirection
feature.
Web Site: Enter the destination web site’s address here.
D-Link DAP-2330 User Manual
55
Section 3 - Configuration
DHCP Server
Dynamic Pool Settings
The DHCP address pool defines the range of the IP address that can be assigned to stations in the network. A Dynamic Pool allows wireless
stations to receive an available IP with lease time control. If needed or required in the network, the DAP-2330 is capable of acting as a DHCP
server.
Function Enable/Disable: Dynamic Host Configuration Protocol (DHCP) assigns
dynamic IP addresses to devices on the network.This protocol
simplifies network management and allows new wireless
devices to receive IP addresses automatically without the
need to manually assign new IP addresses. Select Enable to
allow the DAP-2330 to function as a DHCP server.
IP Assigned From: Input the first IP address available for assignment on your
network.
The Range of Pool (1-254): Enter the number of IP addresses available for assignment.
IP addresses are increments of the IP address specified in the
“IP Assigned From” field.
Subnet Mask: All devices in the network must have the same subnet mask to communicate. Enter the subnet mask for the network
here.
Gateway: Enter the IP address of the gateway on the network.
WINS: Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that
determines the IP address of a network computer that has a dynamically assigned IP address.
DNS: Enter the IP address of the Domain Name System (DNS) server. The DNS server translates domain names such as
www.dlink.com into IP addresses.
Domain Name: Enter the domain name of the network, if applicable. (An example of a domain name is: www.dlink.com.)
Lease Time: The lease time is the period of time before the DHCP server will assign new IP addresses.
D-Link DAP-2330 User Manual
56
Section 3 - Configuration
Static Pool Setting
The DHCP address pool defines the range of IP addresses that can be assigned to stations on the network. A static pool allows specific wireless
stations to receive a fixed IP without time control.
Function Enable/Disable: Dynamic Host Configuration Protocol (DHCP)
assigns IP addresses to wireless devices on
the network. This protocol simplifies network
management and allows new wireless devices
to receive IP addresses automatically without
the need to manually assign IP addresses. Select
Enable to allow the DAP-2330 to function as a
DHCP server.
Assigned IP: Use the Static Pool Settings to assign the same IP
address to a device every time you start up. The
IP addresses assigned in the Static Pool list must
NOT be in the same IP range as the Dynamic
Pool. After you have assigned a static IP address
to a device via its MAC address, click Apply; the
device will appear in the Assigned Static Pool at
the bottom of the screen. You can edit or delete
the device in this list.
Assigned MAC Address: Enter the MAC address of the device requesting
association here.
Subnet Mask: Define the subnet mask of the IP address specified
in the “IP Assigned From” field.
Gateway: Specify the Gateway address for the wireless network.
WINS: Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that
determines the IP address of a network computer with a dynamically assigned IP address, if applicable.
DNS: Enter the DNS server address for your wireless network.
Domain Name: Specify the domain name for the network.
D-Link DAP-2330 User Manual
57
Section 3 - Configuration
Current IP Mapping List
This window displays information about the current assigned DHCP dynamic and static IP address pools. This information is available when you
enable DHCP server on the AP and assign dynamic and static IP address pools.
Current DHCP Dynamic These are IP address pools the DHCP server has
Profile: assigned using the dynamic pool setting.
Binding MAC Address: The MAC address of a device on the network
that is assigned an IP address from the DHCP
dynamic pool.
Assigned IP Address: The current corresponding DHCP-assigned IP
address of the device.
Lease Time: The length of time that the dynamic IP address
will be valid.
Current DHCP Static Pools: These are the IP address pools of the DHCP
server assigned through the static pool settings.
Binding MAC Address: The MAC address of a device on the network
that is within the DHCP static IP address pool.
Assigned IP Address: The current corresponding DHCP-assigned
static IP address of the device.
Binding MAC Address: The MAC address of a device on the network
that is assigned an IP address from the DHCP
dynamic pool.
Assigned IP Address: The current corresponding DHCP-assigned
static IP address of the device.
D-Link DAP-2330 User Manual
58
Section 3 - Configuration
Filters
Wireless MAC ACL
This page allows the user to configure Wireless MAC ACL settings for access control.
Wireless Band: Displays the current wireless band rate.
Access Control List: Select Disable to disable the filters function.
Select Accept to accept only those devices with MAC
addresses in the Access Control List. All other devices
not on the list will be rejected.
Select Reject to reject the devices with MAC
addresses on the Access Control List. All other devices
not on the list will be accepted.
MAC Address: Enter each MAC address that you wish to include in
your filter list, and click Apply.
MAC Address List: When you enter a MAC address, it appears in this list.
Highlight a MAC address and click Delete to remove
it from this list.
Current Client This table displays information about all the current
Information: connected stations.
D-Link DAP-2330 User Manual
59
Section 3 - Configuration
WLAN Partition
This page allows the user to configure a WLAN Partition.
Wireless Band: Displays the current wireless band.
Link Integrity: Select Enable or Disable. If the Ethernet
connection between the LAN and the AP is
disconnected, enabling this feature will cause
the wireless segment associated with the AP to
be disassociated from the AP.
Ethernet WLAN Access: The default is Enable. When disabled, all data
from the Ethernet to associated wireless devices
will be blocked. Wireless devices can still send
data to the Ethernet.
Internal Station Connection: The default value is Enable, which allows stations
to intercommunicate by connecting to a target
AP. When disabled, wireless stations cannot
exchange data on the same Multi-SSID. In Guest
mode, wireless stations cannot exchange data
with any station on your network.
D-Link DAP-2330 User Manual
60
Section 3 - Configuration
Traffic Control
Uplink/Downlink Setting
The uplink/downlink setting allows users to customize the downlink and uplink interfaces including specifying downlink/uplink bandwidth rates
in Mbits per second. These values are also used in the QoS and Traffic Manager windows. Once the desired uplink and downlink settings are
finished, click the Save button to let your changes take effect.
Downlink Bandwidth: The downlink bandwidth in Mbits per second.
Uplink Bandwidth: Uplink Bandwidth: The uplink bandwidth in
Mbits per second.
D-Link DAP-2330 User Manual
61
Section 3 - Configuration
QoS
Quality of Service (QoS) enhances the experience of using a network by prioritizing the traffic of different applications. The DAP-2330 supports
four priority levels. Once the desired QoS settings are finished, click the Save button to let your changes take effect.
Enable QoS: Check this box to allow QoS to prioritize traffic.
Use the drop-down menus to select the four
levels of priority. Click the Save button when
you are finished.
Downlink Bandwidth: Downlink Bandwidth: The downlink bandwidth
in Mbits per second. This value is entered in the
Uplink/Downlink Setting window.
Uplink Bandwidth: Uplink Bandwidth: The uplink bandwidth in
Mbits per second. This value is entered in the
Uplink/Downlink Setting window.
D-Link DAP-2330 User Manual
62
Section 3 - Configuration
Traffic Manager
The traffic manager feature allows users to create traffic management rules that specify how to deal with listed client traffic and specify
downlink/ uplink speed for new traffic manager rules. Click the Save button to let your changes take effect.
Traffic Manager: Use the drop-down menu to Enable the traffic
manager feature.
Unlisted Client Traffic: Select Deny or Forward to determine how to
deal with unlisted client traffic.
Downlink Bandwidth: The downlink bandwidth in Mbits per second.
This value is entered in the Uplink/Downlink
Setting window.
Uplink Bandwidth: Uplink Bandwidth:The uplink bandwidth in
Mbits per second. This value is entered in the
Uplink/Downlink Setting window.
D-Link DAP-2330 User Manual
63
Section 3 - Configuration
Status
In the Status Section the user can monitor and view configuration settings of the access point. Here the user can also view statistics about client
information, WDS information and more. The following pages will explain settings found in the Status section in more detail.
D-Link DAP-2330 User Manual
64
Section 3 - Configuration
Device Information
This page displays the current information like firmware version, Ethernet and wireless parameters, as well as the information regarding CPU and
memory utilization.
Device Information:
D-Link DAP-2330 User Manual
This read- only window displays the
configuration settings of the DAP-2330,
including the firmware version and the
device’s MAC address.
65
Section 3 - Configuration
Client Information
This page displays the associated clients SSID, MAC, band, authentication method, signal strength, and power saving mode for the DAP-2330
network.
Client Information: This window displays the wireless client
information for clients currently connected
to the DAP-2330.
SSID: Displays the SSID of the client.
MAC: Displays the MAC address of the client.
Band: Displays the wireless band that the client is
connected to.
Authentication: Displays the type of authentication being
used.
RSSI: Displays
the
client’s
signal
strength.
Power Saving Mode: Displays the status of the power saving
feature.
D-Link DAP-2330 User Manual
66
Section 3 - Configuration
WDS Information Page
This page displays the access points SSID, MAC, band, authentication method, signal strength, and status for the DAP-2330’s Wireless Distribution
System network.
WDS Information: This windowdisplaystheWirelessDistribution
System information for clients currently
connected to the DAP-2330.
Name: Displays the SSID of the client.
MAC: Displays the MAC address of the client.
Authentication: Displays the type of authentication being
used.
Signal: Displays
the
client’s
signal
strength.
Status: Displays the status of the power saving
feature.
D-Link DAP-2330 User Manual
67
Section 3 - Configuration
Channel Analyze
Wireless Band: Select 2.4GHz in default.
Detect: Click the Detect button to scan.
AP List: This will list the transmitting channels and
quality.
D-Link DAP-2330 User Manual
68
Section 3 - Configuration
Stats Page
Ethernet Traffic Statistics
Displays wired interface network traffic information.
Ethernet Traffic Statistics: This page displays transmitted and received
count statistics for packets and bytes.
D-Link DAP-2330 User Manual
69
Section 3 - Configuration
WLAN Traffic Statistics
Displays throughput, transmitted frame, received frame, and WEP frame error information for the AP network.
WLAN Traffic Statistics: This page displays wireless network
statistics for data throughput,
transmitted and received frames, and
frame errors.
D-Link DAP-2330 User Manual
70
Section 3 - Configuration
Log
View Log
The AP’s embedded memory holds logs here. The log information includes but is not limited to the following items: cold start AP, upgrading
firmware, client associate and disassociate with AP, and web login. The web page holds up to 500 logs.
View Log: The AP’s embedded memory displays
system and network messages including
a time stamp and message type. The log
information includes but is not limited
to the following items: cold start AP,
upgrading firmware, client associate and
disassociate with AP, and web login. The
web page holds up to 500 logs.
D-Link DAP-2330 User Manual
71
Section 3 - Configuration
Log Settings
Enter the log server’s IP address to send the log to that server. Check or uncheck System Activity, Wireless Activity, or Notice to specify what kind
of log type you want it to log.
Log Server/IP Address: Enter the IP address of the server you
would like to send the DAP-2330 log to.
Log Type: Check the box for the type of activity
you want to log. There are three types:
System Activity, Wireless Activity, and
Notice.
E-mail Notification:
Support Simple Mail Transfer Protocol for
log schedule and periodical change key. It
can not support Gmail SMTP port 465.
Please set to Gmail SMTP port 25 or 587.
E-mail Log Schedule:
Use the drop-down menu to set the
e-mail log schedule.
D-Link DAP-2330 User Manual
72
Section 3 - Configuration
Maintenance Section
In the Status Section the user can monitor and view configuration settings of the access point. Here the user can also view statistics about client
information, WDS information and more. The following pages will explain settings found in the maintenance section in more detail.
D-Link DAP-2330 User Manual
73
Section 3 - Configuration
Administration
Limit Administrator
Check one or more of the five main categories to display the various hidden administrator parameters and settings displayed on the next five
pages. Each of the five main categories display various hidden administrator parameters and settings.
Limit Administrator VLAN Check the box provided and the enter
ID: the specific VLAN ID that the
administrator will be allowed to log in
from.
Limit Administrator IP: Check to enable the Limit Administrator
IP address.
IP Range: Enter the IP address range that the
administrator will be allowed to log in
from and then click the Add button.
D-Link DAP-2330 User Manual
74
Section 3 - Configuration
System Name Settings
Each of the five main categories display various hidden administrator parameters and settings.
System Name: The name of the device. The default
name is D-Link DAP-2330.
Location: The physical location of the device, e.g.
72nd Floor, D-Link HQ.
Login Settings
Each of the five main categories display various hidden administrator parameters and settings.
User Name: Enter a user name. The default is admin.
Old Password: When changing your password, enter the
old password here.
New Password: When changing your password, enter the new password here. The password is case-sensitive. “A” is a different
character than “a.” The length should be between 0 and 12 characters.
Confirm Password: Enter the new password a second time for confirmation purposes.
Console Settings
Each of the five main categories display various hidden administrator parameters and settings.
Status: Status is enabled by default. Uncheck the
box to disable the console.
Console Protocol: Select the type of protocol you would
like to use, Telnet or SSH.
Time-out: Set to 1 Min, 3 Mins, 5 Mins, 10 Mins, 15 Mins or Never.
D-Link DAP-2330 User Manual
75
Section 3 - Configuration
SNMP Settings
Each of the five main categories display various hidden administrator parameters and settings.
Status: Check the box to enable the SNMP
functions. This is enabled by default.
Public Community String: Enter the public SNMP community string.
Private Community String: Enter the private SNMP community
string.
D-Link DAP-2330 User Manual
76
Section 3 - Configuration
Administration
Central WiFiManager Settings
The Central WiFiManager section is used to create a set of APs on the Internet to be organized into a single group in order to increase ease of
management. Central WiFiManager and AP Array are mutually exclusive functions.
Enable Central Select to enable or disable the Central
WiFiManager: WiFiManager.
D-Link DAP-2330 User Manual
77
Section 3 - Configuration
Firmware and SSL Upload
This page allows the user to perform a firmware upgrade. A Firmware upgrade is a function that upgrade the running software used by the
access point. This is a useful feature that prevents future bugs and allows for new features to be added to this product. Please go to your local
D-Link website to see if there is a newer version firmware available.
Firmware and SSL You can upload files to the access point.
Certification Upload:
Upload Firmware from The current firmware version is displayed
Local Hard Drive: above the file location field. After the
latest firmware is downloaded, click on
the “Choose File” button to locate the
new firmware. Once the file is selected,
click on the “Open” and “Upload” button
to begin updating the firmware. Please
don’t turn the power off while upgrading.
Upload SSL Certification After you have downloaded a SSL
from Local Hard Drive: certification to your local drive, click
“Choose File.” Select the certification and
click “Open” and “Upload” to complete
the upgrade.
D-Link DAP-2330 User Manual
78
Section 3 - Configuration
Configuration File Upload
This page allows the user to backup and recover the current configuration of the access point in case of a unit failure.
Configuration File Upload You can upload and download
and Download: configuration files of the access point.
Upload Configuration File: Browse to the saved configuration
file you have in local drive and click
“Open” and “Upload” to update the
configuration.
Download Configuration
File: Click “Download” to save the current
configuration file to your local disk. Note
that if you save one configuration file
with the administrator’s password now,
after resetting your DAP-2330 and then
updating to this saved configuration file,
the password will be gone.
D-Link DAP-2330 User Manual
79
Section 3 - Configuration
Time and Date Settings
Enter the NTP server IP, choose the time zone, and enable or disable daylight saving time.
Current Time: Displays the current time and date settings.
Enable NTP Server: Check to enable the AP to get system time
from an NTP server from the Internet.
NTP Server: Enter the NTP server IP address.
Time Zone: Use the drop-down menu to select your
correct Time Zone.
Enable Daylight Check the box to enable Daylight Saving
Saving: Time.
Daylight Saving Use the drop-down menu to select the
Dates: correct Daylight Saving offset.
Set the Date and A user can either manually set the time
Time Manually: for the AP here, or click the Copy Your
Computer’s Time Settings button to copy
the time from the computer in use (Make
sure that the computer’s time is set correctly).
D-Link DAP-2330 User Manual
80
Section 3 - Configuration
Configuration and System
These options are the remaining option to choose from in the top menu. Configuration allows the user to save and activate or discard the
configurations done. System allows the user to restart the unit, perform a factory reset or clear the language pack settings. Logout allows the
user to safely log out from the access point’s web configuration. Help allows the user to read more about the given options to configure without
the need to consult the manual. The following pages will explain settings found in the configuration and system section in more detail.
D-Link DAP-2330 User Manual
81
Section 3 - Configuration
System Settings
On this page the user can restart the unit, perform a factory reset of the access point or clear the added language pack.
Restart the Device: Click Restart to restart the DAP-2330.
Restore to Factory Default Click Restore to restore the DAP-2330
Settings: back to factory default settings.
Clear Language Pack: Click to clear the current Language pack
running.
D-Link DAP-2330 User Manual
82
Section 3 - Configuration
Help
The help page is useful to view a brief description of a function available on the access point in case the manual is not present.
Help: Scroll down the Help page for topics and
explanations.
D-Link DAP-2330 User Manual
83
Appendix A - Wireless Basics
Knowledge Base
Wireless Basics
D-Link wireless products are based on industry standards to provide high-speed wireless connectivity that is easy to use within your home,
business or public access wireless networks. D-Link wireless products provides you with access to the data you want, whenever and wherever
you want it. Enjoy the freedom that wireless networking can bring to you.
WLAN use is not only increasing in both home and office environments, but in public areas as well, such as airports, coffee shops and universities.
Innovative ways to utilize WLAN technology are allowing people to work and communicate more efficiently. Increased mobility and the absence
of cabling and other types of fixed infrastructure have proven to be beneficial to many users.
Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards, allowing wireless users to use
the same applications as those used on a wired network.
People use WLAN technology for many different purposes:
• Mobility - productivity increases when people can have access to data in any location within the operating range of their WLAN.
Management decisions based on real-time information can significantly improve the efficiency of a worker.
• Low implementation costs - WLANs are easy to set up, manage, change and relocate. Networks that frequently change can benefit from
WLAN’s ease of implementation. WLANs can operate in locations where installation of wiring may be impractical.
• Installation and network expansion - by avoiding the complications of troublesome cables, a WLAN system can be fast and easy during
installation, especially since it can eliminate the need to pull cable through walls and ceilings. Wireless technology provides more versatility
by extending the network beyond the home or office.
• Inexpensive solution - wireless network devices are as competitively priced as conventional Ethernet network devices. The DAP-2330 saves
money by providing users with multi-functionality configurable in four different modes.
• Scalability - Configurations can be easily changed and range from Peer-to-Peer networks, suitable for a small number of users to larger
Infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed.
D-Link DAP-2330 User Manual
84
Appendix A - Wireless Basics
Wireless Installation Considerations
The D-Link Access Point lets you access your network using a wireless connection from virtually anywhere within the operating range of your
wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must
pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your
home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the access point and other network devices to a minimum. Each wall or ceiling can reduce
your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a
3. 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so
that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
4. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on the range. Try to position access
points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass,
steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
5. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.
6. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless
connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as
possible. The base transmits a signal even if the phone in not in use.
D-Link DAP-2330 User Manual
85
Section 6 - Troubleshooting
Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of the DAP-2330. Read the following
descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If you have a different operating system, the
screenshots on your computer will look similar to the following examples.)
Why can’t I access the web-based configuration utility?
When entering the IP address of the D-Link access point (192.168.0.50 for example), you are not connecting to a website on the Internet or have to
be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to
connect to the web-based utility.
•
Make sure you have an updated Java-enabled web browser. We recommend the following:
• Internet Explorer 7.0 or higher, Chrome, Firefox, or Safari 4 or higher
• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a
different port on the device if possible. If the computer is turned off, the link light may not be on.
• Disable any internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and
Windows® firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling
or configuring it.
• Configure your Internet settings:
Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their
defaults.
Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK.
Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your D-Link access point in the address bar. This should open the login
page for your the web management.
• If you still cannot access the configuration, unplug the power to the access point for 10 seconds and plug back in. Wait about 30 seconds and try accessing
the configuration. If you have multiple computers, try connecting using a different computer.
What can I do if I forgot my password?
If you forgot your password, you must reset your access point. Unfortunately, this process will change all your settings back to the factory defaults.
To reset the access point, locate the reset button (hole) on the rear panel of the unit. With the access point powered on, use a paperclip to hold the
button down for 10 seconds. Release the button and the access point will go through its reboot process. Wait about 30 seconds to access the access
point. The default IP address is 192.168.0.50. When logging in, the username is admin and leave the password box empty.
D-Link DAP-2330 User Manual
86
Section 6 - Troubleshooting
How to check your IP address?
After you install your network adapter, by default, the TCP/IP settings
should be set to obtain an IP address from a DHCP server (i.e. wireless
router) automatically. To verify your IP address, please follow the steps
below.
Click on Start > Run. In the run box type cmd and click OK.
At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and the default gateway of
your adapter.
If the address is 0.0.0.0, check your adapter installation, security settings,
and the settings on your router. Some firewall software programs may
block a DHCP request on newly installed adapters.
If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify
their wireless network settings.
D-Link DAP-2330 User Manual
87
Section 6 - Troubleshooting
How to statically assign an IP address?
If you are not using a DHCP capable gateway/router, or you need to
assign a static IP address, please follow the steps below:
Step 1:
Windows® 2000: Click on Start > Settings > Control Panel > Network
Connections
Windows XP: Click on Start > Control Panel > Network Connections
Windows Vista®: Click on Start > Control Panel > Network and Internet >
Network and Sharing Center > Manage network connections
Step 2:
Right-click on the Local Area Connection which represents your network
adapter and select Properties.
Step 3:
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4:
Click Use the following IP address and enter an IP address that is on the
same subnet as your network or the LAN IP address on your router.
Example: If the router’s LAN IP address is 192.168.0.1, make your IP
address 192.168.0.X where X is a number between 2 and 99. Make sure
that the number you choose is not in use on the network. Set Default
Gateway the same as the LAN IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router
(192.168.0.1). The Secondary DNS is not needed or you may enter a DNS
server from your ISP.
Step 5:
Click OK twice to save your settings.
D-Link DAP-2330 User Manual
88
Appendix C - Technical Specifications
Standards
• IEEE 802.11n
• IEEE 802.11g
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3b
• IEEE 802.3af
• IEEE 802.3x
Technical Specifications
Network Management
• Web Browser interface (HTTP, Secure HTTP (HTTPS))
• Central WiFiManager
• SNMP Support (Private MIB)
• Command Line Interface (Telnet, Secure SSH Telnet)
Security
• WPA™ Personal/Enterprise
• WPA2™ Personal/Enterprise
• WEP™ 64-/128-bit
Wireless Frequency Range
• 2.4 to 2.4835 GHz
Operating Voltage
• 48V DC +/- 10% for PoE or 12V/1A
D-Link DAP-2330 User Manual
LEDs
• Power/Status
Temperature
• Operating: 0˚C to 40˚C
• Storing: -20˚C to 65˚C
Humidity
• Operating: 10%~90% (non-condensing)
• Storing: 5%~95% (non-condensing)
Certifications
• FCC Class B
• CE
• UL
• IC
• C-Tick
• CSA
• Wi-Fi
Dimensions
• L = 170 mm
• W = 170 mm
• H = 28 mm
89
Appendix D - Antenna Pattern
Antenna Pattern
Antenna Patterns
Orientation
H-Plane
E-Plane
2.4 GHz Ceiling Mounted
(E-Plane)
Wall
Floor
(H-Plane)
2.4 GHz Wall Mounted
(E-Plane)
Wall
Floor
(H-Plane)
D-Link DAP-2330 User Manual
90
Appendix D - Antenna Pattern
Contacting Technical Support
U.S. and Canadian customers can contact D-Link technical support through our web site or by phone.
Before you contact technical support, please have the following ready:
• Model number of the product (e.g. DAP-2330)
• Hardware Revision (located on the label on the device (e.g. rev A1))
• Serial Number (s/n number located on the label on the device).
You can find software updates and user documentation on the D-Link website as well as frequently asked questions and
answers to technical issues.
For customers within the United States:
Phone Support:
(877) 453-5465
Internet Support:
http://support.dlink.com
D-Link DAP-2330 User Manual
For customers within Canada:
Phone Support:
(800) 361-5265
Internet Support:
http://support.dlink.ca
91
Appendix E - Warranty
Warranty
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty:
• Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and
• Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions
or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
Limited Warranty:
D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects in workmanship
and materials under normal use from the date of original retail purchase of the product, for the period set forth below (“Warranty Period”), except
as otherwise stated herein.
• Hardware (excluding power supplies and fans): One (1) year
• Power supplies and fans: One (1) year
• Spare parts and spare kits: Ninety (90) days
The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at
D-Link’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual
purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware
need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any
reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety (90) days, whichever is longer,
and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if D-Link determines that it is not practical
to repair or replace the defective Hardware, the actual price paid by the original purchaser for the defective Hardware will be refunded by D-Link
upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded,
shall become the property of D-Link upon replacement or refund.
D-Link DAP-2330 User Manual
92
Appendix E - Warranty
Limited Software Warranty:
D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional specifications
for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90)
days (“Software Warranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated in its
documentation. D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will
be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty
will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s
functional specifications for the Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as
otherwise agreed by DLink in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions
of the license granted by D-Link for the Software. Replacement Software will be warranted for the remainder of the original Warranty Period and is
subject to the same limitations and exclusions. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion
that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be
refunded by D-Link; provided that the non-conforming Software (and all copies thereof ) is first returned to D-Link. The license granted respecting
any Software for which a refund is given automatically terminates.
Non-Applicability of Warranty:
The Limited Warranty provided hereunder for Hardware and Software portions of D-Link’s products will not be applied to and does not cover any
refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or
the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold “As-Is” without any
warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the contrary.
Submitting A Claim:
The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the
product is within warranty, the customer shall submit a claim to D-Link as outlined below:
• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software
nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a
copy of the dated purchase invoice for the product) if the product is not registered.
• The customer must obtain a Case ID Number from D-Link Technical Support (USA 1-877-453-5465 or Canada 1-800-361-5265), who
will attempt to assist the customer in resolving any suspected defects with the product. If the product is considered defective, the
customer must obtain a Return Material Authorization (“RMA”) number by completing the RMA form. Enter the assigned Case ID
Number at https://rma.dlink.com/ (USA only) or https://rma.dlink.ca (Canada only).
D-Link DAP-2330 User Manual
93
Appendix E - Warranty
• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package
to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package.
Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product
and will not ship back any accessories.
• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD
will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped
to D-Link Systems, Inc.
• USA residents send to 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that
are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common
carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise
we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are
prepaid by the customer. D-Link may reject or return any product that is not packaged and shipped in strict compliance with the
foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to
pay D-Link’s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance
with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming.
• Canadian residents send to D-Link Networks, Inc., 2525 Meadowvale Boulevard Mississauga, Ontario, L5N 5S2 Canada. D-Link will
not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to
the customer via Purolator Canada or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link
if you use an address in Canada, otherwise we will ship the product to you freight collect. Expedited shipping is available upon
request and provided shipping charges are prepaid by the customer. D-Link may reject or return any product that is not packaged
and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of
the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product that is
not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or
non-conforming. RMA phone number: 1-800-361-5265 Hours of Operation: Monday-Friday, 9:00AM – 9:00PM EST
What Is Not Covered:
The Limited Warranty provided herein by D-Link does not cover:
Products that, in D-Link’s judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation,
lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number
has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs;
Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act
of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone
other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers,
or the liquidators expressly disclaim their warranty obligation pertaining to the product.
D-Link DAP-2330 User Manual
94
Appendix E - Warranty
While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D-Link
Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.
Disclaimer of Other Warranties:
EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS”WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER
INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY
SHALL BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE
LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE
PURCHASER OF THE PRODUCT.
Limitation of Liability:
TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL
OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK
STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT
IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK
FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF
THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF
THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT. THE MAXIMUM
LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING
EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED
OR STATUTORY.
Governing Law:
This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This
Limited Warranty provides specific legal rights and you may also have other rights which vary from state to state.
Trademarks:
D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their
respective owners.
Copyright Statement:
No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any
D-Link DAP-2330 User Manual
95
Appendix E - Warranty
derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the
United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.
Copyright ©2011 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.
CE Mark Warning:
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take
adequate measures.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate this equipment.
802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
D-Link DAP-2330 User Manual
96
Appendix E - Warranty
The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match
the intended destination. The firmware setting is not accessible by the end user.
For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office.
This device and it’s antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC
multi-transmitter product procedures.
Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired operation of the device
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the EIRP is not more than required for successful
communication.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.
Caution:
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités. Sélection d’autres canaux n’est pas possible.
This device and it’s antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multitransmitter product procedures.
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou transmetteur.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé
et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
D-Link DAP-2330 User Manual
97
Appendix F - Registration
Registration
Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
Version 1.0
May 12, 2014
D-Link DAP-2330 User Manual
98

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : jill
Create Date                     : 2014:05:14 10:52:14Z
Modify Date                     : 2014:05:27 18:46:18+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : jill
Creator Tool                    : Infix PDF Printer
Metadata Date                   : 2014:05:27 18:46:18+08:00
ICN App Name                    : Foxit Advanced PDF Editor
ICN App Platform                : Windows
ICN App Version                 : 3.05
Producer                        : Infix PDF Printer
Document ID                     : uuid:82608423-41e1-4f32-9f4a-dbf60c8cf416
Instance ID                     : uuid:c0073194-a972-42cf-9166-217694a055e9
Page Count                      : 98

EXIF Metadata provided by EXIF.tools