D Link AP3662A1 Wireless AC1200 Dual Band Outdoor PoE Access Point User Manual

D Link Corporation Wireless AC1200 Dual Band Outdoor PoE Access Point

UserManual.wiki >

AP3662A1 User Manual

User manual

This document will guide you through the basic installation process for your new D-Link Dual Band Outdoor Access PointBuilding Networks for PeopleDAP-3662Documentation also available via the D-Link WebsiteQuick Installation GuideWireless AC1200 Concurrent Dual Band Outdoor PoE Access PointQuick Installation GuideКраткое руководство по установкеGuía de Instalación RápidaGuia de Instalação Rápida快速安裝指南Petunjuk Pemasangan Cepatクイックインストールガイド

2D-Link DAP-3662 Quick Install Guide2ENGLISHImportant InformationThis product should ONLY be installed by an experienced installer who is familiar with local building and safety codes and, where applicable, is licensed by the appropriate authorities. Failure to employ an experienced installer may render the D-Link product warranty void and may also expose the end user or the service provider to legal and nancial liabilities. D-Link and its resellers or distributors expressly disclaim any and all liabilities for injury, damage, or violation of regulations due to the improper installation of outdoor units or antennas.A safety grounding system is necessary to protect your outdoor installation from lightning strikes and the build-up of static electricity. Direct grounding of an outdoor AP is very important and can protect your networks from brutal outdoor environments and devastating ESD attacks. The grounding system must comply with the National Electrical Code and safety standards that apply in your country and/or region. Always check with a qualied electrician if you are in doubt as to whether your outdoor installation is properly grounded.Quick Install GuideThis installation guide provides basic instructions for installing the DAP-3662 Wireless AC1200 Concurrent Dual Band Outdoor PoE Access Point on your network. For additional information about how to use the Access Point, please see the datasheet and user manual from the D-Link support website.Minimum System Requirements Computer with Windows, MAC OS, or Linux-based operating system, and an Ethernet adapter installed -Internet Explorer 7.0, Mozilla Firefox® version 12.0, Safari 4.0, or Chrome 20.0 or newerPackage Contents -DAP-3662 Wireless AC1200 Concurrent Dual Band Outdoor PoE Access Point -Installation CD-ROM -Quick Installation Guide -PoE Injector -Power Adapter (48 V/ 0.5 A)1 -Mounting kit (Wall/Pole Mount) -Stainless steel mount base x 1 -Stainless tie back straps x 2 -Wall screw x 4 -Wall plug x4 -Stainless mount screw (hexagonal hole) x1 -Hexagon Socket Spanner -Two LAN Port Waterproof Enclosure -Grounding WireIf any of the above items are missing, please contact your reseller.1 Using a power supply with a different voltage rating or PoE injector than the one included with the DAP-3662 will cause damage and void the warranty for this product.

3D-Link DAP-3662 Quick Install Guide3ENGLISHPhysical InstallationSTEP 1: Connect an Ethernet Cable to the LAN1 (PoE) Port on the AP.STEP 2: Mount the AP to a Pole or Wall 2A: Mounting The DAP-3662 On A PoleSecure mount base to the pole with two stainless tie back strap sets. Ensure that the tie back is locked securely. Align the DAP-3662 with the mounting plate Once aligned, slide the device down so that the mounting plate securely locks into the DAP-36622B: Mounting The DAP-3662 On A WallSecurely mount the base to the wall usingwall plug and wall screw.Align the DAP-3662 with the mounting plate

4D-Link DAP-3662 Quick Install Guide4ENGLISHOnce aligned, slide the device down so that the mounting plate securely locks into the DAP-3662STEP 3: Install Mount Screw to Fix DAP-3662 On A Mounting (Pole/Wall Mount base)Use the included mount screw (hexagonal hole) to lock the DAP-3662 to the pole/wall mountWith the included hexagon socket spanner, tighten the mount screw until the DAP-3662 is secured.STEP 4: Connect Grounding WireA grounding wire is recommended to protect your device from lightning strikes and the buildup of static electricity.Attach the grounding wire to the DAP-3662 using the included screw.Tighten the grounding wire to the DAP-3662 until it is securely attached. Attach the other end of the grounding wire to either the wall or pole mount. Ensure that the wall or pole mount is connected to an electrical ground.

5D-Link DAP-3662 Quick Install Guide5ENGLISHSTEP 5: Connect the AP to Your NetworkA. Connect the Ethernet cable (connected to the AP in STEP 1) from the AP to the “P+DATA OUT” port on the PoE Injector.B. Connect an Ethernet cable from a router/switch or PC to the “DATA IN” port on the PoE Injector.C. Attach the power adapter to the connector labeled “POWER IN” on the PoE Injector, and attach it into an electrical outlet.CongurationIf you are configuring the AP locally, connect a PC to the PoE Injector “DATA IN” port using an Ethernet cable.A. Assign a static IP address to your PC which is in the same network segment with the device. As the default IP address of this unit is 192.168.0.50, you may choose any address from 192.168.0.1 to 192.168.0.254, except 192.168.0.50.B. Open a web browser and go to http://192.168.0.50. Enter admin as your username and leave the password blank to log into the web UI. Now you can configure the AP via web UI.ACBP+DATA OUTDATA INPoE InjectorPOWER INRouter or Switch Computer APLAN1 (PoE)

FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 23 cm between the radiator & your body.