D Link BA1510PA1 Business Cloud Access Point User Manual 1
D Link Corporation Business Cloud Access Point 1
D Link >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3305676 |
| Application ID | 9gNzAzjSCssk0M5wKSx68A== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 93.68kB (1171038 bits) |
| Date Submitted | 2017-03-07 00:00:00 |
| Date Available | 2017-03-10 00:00:00 |
| Creation Date | 2014-08-22 10:27:54 |
| Producing Software | Adobe PDF Library 11.0 |
| Document Lastmod | 2017-02-20 14:41:36 |
| Document Title | Microsoft Word - 文件1 |
| Document Creator | Adobe InDesign CC 2014 (Windows) |
| Document Author: | deliaf |
Quick Installation Guide Business Cloud Access Point This document will guide you through the basic installation process for your D-Link Wireless AC Access Point. DBA-1510P Documentation is also available on the D-Link website ENGLISH About This Instruction Guide Hardware Overview This installation guide provides instructions for installing the DBA-1510P Business Cloud Access Point on your network. For additional information about how to use the DBA-1510P, please see the User’s Manual which is available from the D-Link support website. LEDs Setup Preparation Please ensure that the following items are readily available before continuing the quick installation process. D-Link Business Cloud License DBA-1510P Registration in D-Link Business Cloud DBA-1510P is able to connect to D-Link Business Cloud through internet. Power LAN Cloud System Requirements If you are unable to connect to the D-Link Business Cloud through the Internet due to your networking configuration you will need to manually configure the DBA-1510P. Below are the minimum system requirements needed to manually configure the device. A n Ethernet port, or an installed Ethernet adapter Internet Explorer 9.0, Safari 5.0, Firefox 19, Chrome 25 or later versions of these browsers Package Contents DBA-1510P Business Cloud Access Point Mounting Ring Power Adapter Ethernet Cable Console Cable Rubber Feet If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage than the one included with the DBA1510P will damage the device and void the warranty for this product. 2.4 Ghz 5 Ghz Solid Orange The DBA-1510P is performing its startup procedure Solid Green The DBA-1510P is ready to use Solid Green The DBA-1510P is connected to another device on the network Blinking Green The DBA-1510P is transferring data Solid Orange The DBA-1510P is connecting to the D-Link Business Cloud Solid Green The DBA-1510P is currently in Cloud mode Solid Red The DBA-1510P is not working properly in Cloud mode Solid Green The DBA-1510P is operating in 2.4 Ghz mode Blinking Green The DBA-1510P is transferring data over 2.4 Ghz Solid Green The DBA-1510P is operating in 5 Ghz mode Blinking Green The DBA-1510P is transferring data over 5 Ghz Interfaces The DBA-1510P will automatically connect to the D-Link Business Cloud, download its configuration, and join the appropriate network. D-Link Business Cloud DBA-1510P Front Switch or Router Management If you are unable to connect the DBA-1510P to the D-Link Business Cloud through the Internet due to your networking configuration you will Management need to DBA-1510P manually configure the DBA-1510P using one of the following options. Kensington Security Slot Reset Button Press the Reset Button between 2 to 5 seconds to restart the device. Press the Reset Button between 6 to 15 seconds to restore the device to its factory default settings. ENGLISH Press the Reset Button more than 15 seconds to restore the device to its factory default settings and also force the loading of alternate firmware. Installation Switch or Router ENGLISH ENGLISH Bottom Power Receptor LAN Port (PoE) Serial Console Port Step 1 – Powering The Device 1. Connect the DBA-1510P and your Switch or Router Management DBA-1510P computer directly via a straight-through Ethernet cable. You can then manage the access point from your computer using the following steps. Management DBA-1510P Enter the DBA-1510P hostname in the address field of your browser and then D-Link DBA-1510P Quick Install Guide press Enter. The default hostname is “DBA-1510P-XXXX” where XXXX is the last 4 digits of the MAC address listed on the device label located on the bottom of the device. D-Link Business Cloud To power on the DBA-1510P, you can use one of the two following methods: 1. Connect the supplied power adapter 2. Plug one end of your Ethernet cable into the LAN port of the DBA-1510P, and the other end into a port on a Power over Ethernet enabled switch. Log in to the administration web pages. The default login information is: Username: admin Switch or Router Switch or Router Management DBA-1510P Password: admin DBA-1510P Management 2. Connect the DBA-1510P and your computer to the same switch or router. You Switch or Router Management DBA-1510P can then manage the access point from your computer using the following steps. Step 2 – Configure The Device The easiest way to configure the DBA-1510P is to connect the DBA-1510P to the Internet through a switch or router. Connect your computer to the Internet and manage the DBA-1510P via D-Link Business Cloud. Enter the DBA-1510P hostname in the address field of your browser and then Management DBA-1510P press Enter. The default hostname is D-Link DBA-1510P Quick Install Guide ENGLISH D-Link Business Cloud “DBA-1510P-XXXX” where XXXX is the last 4 digits of the MAC address listed on the device label locatedSwitch onorthe bottom of Switch or Router Router Management DBA-1510P the device. Log in to the administration web pages. The default login information is: Username: admin Management DBA-1510P Password: admin Switch or Router ENGLISH DBA-1510P Mounting on a Solid Wall Place the plastic wall mounting ring on a wall or ceiling. 1. Mark the points where you will insert the screws. Remove the mounting ring. Management 3. Connect your computer to the DBA-1510P wirelessly via the SSID “DBA-1510P-XXXX” where XXXX is the Management DBA-1510P last 4 digits of the MAC address listed on the device label located on the bottom D-Link DBA-1510P Quick the Install Guide of the device. You can then manage access point D-Link fromBusiness yourCloud computer using the following steps. Enter the DBA-1510P hostname in the addressSwitch fieldor Router of your browser and then Switch or Router Management DBA-1510P press Enter. The default hostname is “DBA-1510P-XXXX” where XXXX is the last 4 digits of the MAC address listed on the device label located on the bottom of the device. Management DBA-1510P 2. Drill holes in the marked points and insert the plastic wall anchors. 3. Use the supplied screws to attach the mounting ring to the wall. Log in to the administration web pages. The default login information is: Username: admin Switch or Router Management DBA-1510P Password: admin DBA-1510P Management Note: Once the device has been manually D-Link DBA-1510P Quick Install Guide configured, it must be able to connect to the D-Link Business Cloud in order to continue functioning properly. Step 3 – Mounting The Device To mount the DBA-1510P, use one of the following methods: 4. Plug the Ethernet cable into the LAN port on the access point. 6. Place the DBA-1510P onto the mounting ring brackets. Lock the DBA-1510P into place by rotating the DBA-1510P clockwise. Additional Information If you are encountering problems setting up your network, please refer to the user manual that can be obtained from the D-Link website. It contains many more rules, charts, explanations, and examples to help you get your network up and running. ENGLISH 5. If you are not using a PoE switch or router with the DBA-1510P, plug the power cable into the Power Receptor on the access point. Additional help is available through our offices listed at the back of the user manual or online. To find out more about D-Link products or marketing information, please visit the website http://www.dlink.com. Warranty Information The Warranty information is available at http:// warranty.dlink.com/ Placement on a Desktop 1. Attach the provided rubber feet to the holes located on the back of the DBA1510P housing. 2. Plug the Ethernet cable into the LAN port on the access point. 3. If you are not using a PoE switch or router with the DBA-1510P, plug the power cable into the Power Receptor on the access point. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Non-modification Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2014:08:22 10:27:54+08:00 Modify Date : 2017:02:20 14:41:36+08:00 Trapped : False Author : deliaf XMP Toolkit : 3.1-701 Producer : Adobe PDF Library 11.0 Creator Tool : Adobe InDesign CC 2014 (Windows) Title : Microsoft Word - 文件1 Creator : deliaf Page Count : 6EXIF Metadata provided by EXIF.tools