D Link CS2130A1 HD Wireless N Cub Network Camera User Manual

D Link Corporation HD Wireless N Cub Network Camera

User manual

2D-Link DCS-2130 User Manual
Table of Contents
Product Overview ........................................................ 4
Package Contents ................................................... 4
System Requirements ............................................. 4
Hardware Overview ..................................................... 5
Front .................................................................. 5
Rear ................................................................... 6
Side ....................................................................7
Installation ....................................................................8
Starting the Camera Installation Wizard ..................8
Connecting Wirelessly Using WPS .......................... 9
Conguration ............................................................. 10
Using the Conguration Menu ...............................10
Live Video ..............................................................11
Setup ..................................................................... 13
Wizard .............................................................. 13
Internet Connection Setup Wizard ................... 13
Motion Detection Setup Wizard .......................16
Network Setup .................................................18
Wireless Setup ................................................. 21
Dynamic DNS ..................................................23
Image Setup ....................................................24
Audio and Video ..............................................26
Preset .............................................................. 28
Motion Detection .............................................. 30
Time and Date .................................................31
Event Setup .....................................................32
Application .................................................... 33
Add Server .................................................... 34
Add Media ..................................................... 35
Add Event ..................................................... 37
Add Recording .............................................. 39
SD Card ........................................................... 41
Advanced ............................................................... 42
Digital Input/Output .......................................... 42
HTTPS ............................................................. 43
Access List ....................................................... 44
Maintenance .......................................................... 45
Device Management ........................................ 45
Backup and Restore ........................................46
Firmware Upgrade ........................................... 47
Status .................................................................... 48
Device Info ....................................................... 48
Logs ................................................................. 49
Help .................................................................50
Appendix .................................................................... 51
DI/DO Input Specications ....................................51
Technical Specications ........................................ 52
3D-Link DCS-2130 User Manual
D-Link reserves the right to revise this publication and to make changes in the contents hereof without obligation to notify any person or
organization of such revisions or changes.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or
other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective
companies.
Copyright © 2011 D-Link Corporation.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link
Systems, Inc.
Revision Date Description
1.0 June 14, 2011 DCS-2130 Revision A1 with rmware version 1.00
Preface
4D-Link DCS-2130 User Manual
Product OverviewProduct Overview
DCS-2130 Network Camera
CAT5 Ethernet cable
Power adapter
Camera stand
CD-ROM with User Manual and software
Quick Installation Guide
If any of the above items are missing, please contact your reseller.
Package Contents
Existing 10/100 Ethernet-based network or 802.11n/g wireless network
Computer with Windows 7/Vista/XP for Camera Setup Wizard
Internet Explorer, Firefox, Opera, or other web browser for web interface
(Internet Explorer recommended for full functionality)
If any of the above items are missing, please contact your reseller.
System Requirements
5D-Link DCS-2130 User Manual
Hardware Overview
Microphone
Records audio from the surrounding
area
Camera Lens
Records video of the surrounding area
Front
Status LED
Indicates the camera's current status
Hardware Overview
Hardware Overview
6D-Link DCS-2130 User Manual
Hardware Overview
Rear
I/O Connector
I/O connectors for external devices
Reset
Press and hold this button for 10 seconds
to reset the camera
Ethernet
Connects to your network via an Ethernet
cable
Power Connector
Connects to the included DC 5 V
power adapter
Adjustment Ring
Tighten or loosen the adjustment
ring to adjust the camera's position
WPS Button and LED
Press this button, then press the WPS
button on your router to set up a wireless
connection automatically
Base Holes
Can be used with cable ties to
attach camera to a surface
7D-Link DCS-2130 User Manual
Hardware Overview
MicroSD Slot
Accepts MicroSD ash memory
cards for recording snapshots
Audio Out Port
Connects to an external speaker
(optional)
Side
8D-Link DCS-2130 User Manual
Installation
Starting the Camera Installation Wizard
Insert the Installation CD-ROM into your computer’s optical drive to start the autorun program.
The CD-ROM will open the Camera Setup Wizard. Simply click the Start button to go through the Setup Wizard, which will guide you
through the setup process from connecting your hardware to conguring your camera.
Installation
9D-Link DCS-2130 User Manual
Installation
Connecting Wirelessly Using WPS
Alternatively, you may create a wireless connection by using the WPS Button on the
back of the camera.
To create a WPS connection:
Step 1
Press and hold the WPS button on the back of the camera for three seconds. The WPS
status LED above the button will blink.
Step 2
Press the WPS button on your router within 60 seconds. The WPS button is usually
on the front or side of your router. On some routers, you may need to log in to the web
interface and then click on an onscreen button to activate the WPS feature. If you are not
sure where the WPS button is on your router, please refer to your router’s User Manual.
The DCS-2130 will automatically create a wireless connection to your router. While
connecting, the green LED will ash and your camera will reboot.
10D-Link DCS-2130 User Manual
Conguration
Using the Conguration Menu
Conguration
After completing the Camera Setup Wizard, you are ready to use your camera. The camera’s built-in Web conguration utility is
designed to allow you to easily access and congure your DCS-2130. At the end of the wizard, click the Go To Camera button, or enter
the IP address of your camera into a web browser, such as Internet Explorer. To log in, use the user name admin and the password
you created in the Installation Wizard. If you did not create a password, the default password is blank. After entering your password,
click the OK button.
Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the default IP is
192.168.0.20.
11D-Link DCS-2130 User Manual
Conguration
Live Video
This section shows your camera’s live video. You may select any of the available icons listed below to operate the camera. You may
also select your language using the drop-down menu on the left side of the screen.
You can zoom in and out on the live video image using your mouse. Right-click to zoom out or left-click to zoom in on the image.
Digital Input
Indicator
This indicator will change color when a digital
input signal is detected.
Motion Trigger
Indicator
This indicator will change color when a trigger
event occurs.
Note: The video motion feature for your
camera must be enabled.
Recording
Indicator
When a recording is in progress, this indicator
will change color.
Video Prole 1
Video Prole 2
Video Prole 3
Full screen mode
Taking a Snapshot
Recording a Video Clip
Set a Storage Folder
Listen/Stop Listening
Talk/Stop Talking
Start/Stop Digital Output
Control Pad
This control pad can be used to pan, tilt, and zoom
within the camera's predened view area, if one
has been dened.
12D-Link DCS-2130 User Manual
Conguration
If any presets have been dened, selecting a preset from this list
will display it.
This option displays the status of the SD card. If no SD card has
been inserted, this screen will display the message "Card Invalid."
This option displays the status of your I/O device if a device has
been connected.
This camera uses electronic pan/tilt/zoom (ePTZ) to select and
view areas of interest in the eld of view. Please see page 26 for
information about setting the frame size and view window area.
You may select a value between 0 and 64. 0 is the slowest and 64
is the fastest.
This window indicates the total eld of view (FOV) of the camera.
The red box indicates the visible region of interest (ROI).
You may select the interface language using this menu.
Go To:
(Preset List)
SD Status:
IO Status:
PTZ Control:
ePTZ Speed:
Global View:
Language:
Auto Pan Starts the automatic
panning function. The
ROI will pan from back
and forth within the
FOV
Stop Stops the camera
ePTZ motion
Preset Path Starts the camera's
motion along the
predened path
13D-Link DCS-2130 User Manual
Conguration
Setup
Wizard
To congure your Network Camera, click Internet Connection
Setup Wizard. Alternatively, you may click Manual Internet
Connection Setup to manually congure your Network Camera and
skip to page 22.
To quickly congure your Network Camera’s motion detection
settings, click Motion Detection Setup Wizard. If you want to
enter your settings without running the wizard, click Manual Motion
Detection Setup and skip to page 27.
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to
congure your new D-Link Camera and connect the camera to the
internet. Click Next to continue.
Note: Select DHCP if you are unsure of which settings to choose.
Click Next to continue.
14D-Link DCS-2130 User Manual
Conguration
Select Static IP if your Internet Service Provider has provided you with
connection settings, or if you wish to set a static address within your
home network. Enter the correct conguration information and click Next
to continue.
If you are using PPPoE, select Enable PPPoE and enter your user name
and password, otherwise click Next to continue.
If you have a Dynamic DNS account and would like the camera to update
your IP address automatically, Select Enable DDNS and enter your host
information. Click Next to continue.
Enter a name for your camera and click Next to continue.
15D-Link DCS-2130 User Manual
Conguration
Congure the correct time to ensure that all events will be
triggered as scheduled. Click Next to continue.
If you have selected DHCP, you will see a summary of your
settings, including the camera's IP address. Please write down
all of this information as you will need it in order to access your
camera.
Click Apply to save your settings.
16D-Link DCS-2130 User Manual
Conguration
This wizard will guide you through a step-by-step process to congure your
camera's motion detection functions.
Click Next to continue.
Step 1
This step will allow you to enable or disable motion detection, specify the
detection sensitivity, and adjust the camera’s ability to detect movement.
You may specify whether the camera should capture a snapshot or a video
clip when motion is detected.
Please see the Motion Detection section on page 27 for information about
how to congure motion detection.
Step 2
This step allows you to enable motion detection based on a customized
schedule. Specify the day and hours. You may also choose to always
record motion.
Motion Detection Setup Wizard
17D-Link DCS-2130 User Manual
Conguration
Step 3
This step allows you to specify how you will receive event notications
from your camera. You may choose not to receive notications, or to
receive notications via e-mail or FTP.
Please enter the relevant information for your e-mail or FTP account.
Click Next to continue.
Step 4
You have completed the Motion Detection Wizard.
Please verify your settings and click Apply to save them.
Please wait a few moments while the camera saves your settings and
restarts.
18D-Link DCS-2130 User Manual
Conguration
Network Setup
Use this section to congure the network connections for your camera. All relevant information must be entered accurately. After
making any changes, click the Save Settings button to save your changes.
LAN Settings:
DHCP:
Static IP Address:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
This section lets you congure settings for your local
area network.
Select this connection if you have a DHCP server
running on your network and would like your camera
to obtain an IP address automatically.
You may obtain a static or xed IP address and
other network information from your network
administrator for your camera. A static IP address
may simplify access to your camera in the future.
Enter the xed IP address in this eld.
This number is used to determine if the destination
is in the same subnet. The default value is
255.255.255.0.
The gateway used to forward frames to destinations
in a different subnet. Invalid gateway settings may
cause the failure of transmissions to a different
subnet.
The primary domain name server translates names
to IP addresses.
The secondary DNS acts as a backup to the primary
DNS.
19D-Link DCS-2130 User Manual
Conguration
Enable UPnP:
Enable UPnP Port Forwarding:
Enable PPPoE:
User Name / Password:
HTTP Port:
Access Name for Stream 1~3:
HTTPS Port:
RTSP Port:
Enabling this setting allows your camera to be
congured as a UPnP device on your network.
Enabling this setting allows the camera to add port
forwarding entries into the router automatically on a
UPnP capable network.
Enable this setting if your network uses PPPoE.
Enter the username and password for your PPPoE
account. Re-enter your password in the Conrm
Password eld. You may obtain this information
from your ISP.
The default port number is 80.
The default name is video#.mjpg, where # is the
number of the stream.
You may use a PC with a secure browser to
connect to the HTTPS port of the camera. The
default port number is 443.
The port number that you use for RTSP streaming
to mobile devices, such as mobile phones or PDAs.
The default port number is 554. You may specify the
address of a particular stream. For instance, live1.
sdp can be accessed at rtsp://x.x.x.x/video1.sdp
where the x.x.x.x represents the ip address of your
camera.
20D-Link DCS-2130 User Manual
Conguration
Maximum Upload/Download
Bandwidth:
Specifying the maximum download/upload bandwidth
for each socket can be useful when connecting your
device to a busy or heavily loaded network. Entering
a value of '0' indicates that the camera should not
monitor bandwidth. Specifying other values will limit
the camera's transfer speed to the specied number
of kilobytes per second.
21D-Link DCS-2130 User Manual
Conguration
Wireless Setup
This section allows you to set up and congure the wireless settings on your camera. After making any changes, click the Save
Settings button to save your changes.
Site Survey:
SSID:
Wireless Mode:
Channel:
Authentication:
Encryption:
Click the Rescan button to scan for available wireless
networks. After scanning, you can use the dropdown
box to select an available wireless network. The
related information (SSID, Wireless Mode, Channel,
Authentication, Encryption) will be automatically
lled in for you.
Enter the SSID of the wireless access point you
wish to use.
Use the dropdown box to select the mode of the
wireless network you wish to connect to.
Infrastructure is normally used to connect to an
access point or router. Ad-Hoc is usually used to
connect directly to another computer.
If you are using Ad Hoc mode, select the channel
of the wireless network you wish to connect to, or
select Auto.
Select the authentication you use on your wireless
network - Open, Shared, WPA-PSK, or WPA2-PSK.
If you use WPA-PSK or WPA2-PSK authentication,
you will need to specify whether your wireless
network uses TKIP or AES encryption. If you use
Open or Shared authentication, WEP encryption
should be setting.
22D-Link DCS-2130 User Manual
Conguration
Key: If you use WEP, WPA-PSK, or WPA2-PSK
authentication, enter the Key (also known as
password) used for your wireless network.
23D-Link DCS-2130 User Manual
Conguration
Dynamic DNS
DDNS (Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it has
been modied. A user name and password are required when using the DDNS service. After making any changes, click the Save
Settings button to save your changes.
Enable DDNS:
Server Address:
Host Name:
User Name:
Password:
Timeout:
Status:
Select this checkbox to enable the DDNS function.
Select your Dynamic DNS provider from the pull
down menu or enter the server address manually.
Enter the host name of the DDNS server.
Enter the user name or e-mail used to connect to
your DDNS account.
Enter the password used to connect to your DDNS
server account.
Enter the DNS Timeout values you wish to use.
Indicates the connection status, which is
automatically determined by the system.
24D-Link DCS-2130 User Manual
Conguration
Image Setup
In this section, you may congure the video image settings for your camera. A preview of the image will be shown in Live Video.
The Privacy Mask setting allows you to specify up
to 3 rectangular areas on the camera's image to be
blocked/excluded from recordings and snapshots.
You may click and drag the mouse cursor over the
camera image to draw a mask area.
Right clicking on the camera image brings up the
following menu options:
Disable All: Disables all mask areas
Enable All: Enables all mask areas
Reset All: Clears all mask areas.
If the video ickers, try enabling this setting.
This will mirror the image horizontally.
This will ip the image vertically. When turning Flip
on, you may want to consider turning Mirror on as
well.
Select the frequency used by your power lines to
avoid interference or distortion.
Use the dropdown box to change white balance
settings to help balance colors for different
environments. You can choose from Auto, Outdoor,
Indoor, Fluorescent, and Push Hold.
Enable Privacy Mask:
Anti Flicker:
Mirror:
Flip:
Power Line:
White Balance:
25D-Link DCS-2130 User Manual
Conguration
Changes the exposure mode. Use the dropdown
box to set the camera for Indoor, Outdoor, or Night
environments, or to Moving to capture moving
objects. The Low_Noise option will focus on creating
a high-quality picture without noise. You can also
create 3 different custom exposure modes. The Max
Gain setting will allow you to control the maximum
amount of gain to apply to brighten the picture.
This setting controls the amount of noise reduction
that will be applied to the picture.
Adjust this setting to compensate for backlit subjects.
Adjust this setting to alter the color intensity/strength.
This setting controls the amount of coloration, from
grayscale to fully saturated.
Specify a value from 0 to 8 to specify how much
sharpening to apply to the image.
Click this button to reset the image to factory default
settings.
Exposure Mode:
Denoise:
Brightness:
Contrast:
Saturation:
Sharpness:
Reset Default:
26D-Link DCS-2130 User Manual
Conguration
Audio and Video
You may congure up to 3 video proles with different settings for your camera. Hence, you may set up different proles for your
computer and mobile display. In addition, you may also congure the two-way audio settings for your camera. After making any
changes, click the Save Settings button to save your changes.
Number of active proles:
Aspect ratio:
Mode:
Frame size / View window
area:
Maximum frame rate:
You can use the dropdown box to set up to 3 active
proles.
Set the aspect ratio of the video to 4:3 standard or
16:9 widescreen.
Set the video codec to be used to JPEG, MPEG-4,
or H.264.
Frame size determines the total capture resolution,
and View window area determines the Live Video
viewing window size. If the Frame size is larger than
the Live Video size, you can use the ePTZ controls
to look around.
16:9 1280 x 800, 1280 x 720, 800 x 450, 640 x
360, 480 x 270, 320 x 176, 176 x 144
4:3 1024 x 768, 800 x 600, 640 x 480, 480 x
360, 320 x 240, 176 x 144
Note: If your View window area is the same as your
Frame size, you will not be able to use the ePTZ
function.
A higher frame rate provides smoother motion for
videos, and requires more bandwidth. Lower frame
rates will result in stuttering motion, and requires
less bandwidth.
27D-Link DCS-2130 User Manual
Conguration
Video Quality:
Constant bit rate:
Fixed quality:
Audio in off:
Audio in gain level:
Audio out off:
Audio out volume level:
This limits the maximum frame rate, which can be
combined with the "Fixed quality" option to optimize
the bandwidth utilization and video quality. If xed
bandwidth utilization is desired regardless of the
video quality, choose "Constant bit rate" and select
the desired bandwidth.
The bps will affect the bit rate of the video recorded
by the camera. Higher bit rates result in higher
video quality.
Select the image quality level for the camera to
try to maintain. High quality levels will result in
increased bit rates.
Ticking this checkbox will mute incoming audio.
This setting controls the amount of gain applied to
incoming audio to increase its volume.
Ticking this checkbox will mute outgoing audio.
This setting controls the amount of gain applied to
outgoing audio to increase its volume.
28D-Link DCS-2130 User Manual
Conguration
Preset
This screen allows you to set preset points for the ePTZ function of the camera, which allows you to look around the camera's viewable
area by using a zoomed view. Presets allow you to quickly go to and view a specic part of the area your camera is covering, and you
can create preset sequences, which will automatically change the camera's view between the different presets according to a dened
order and timing you can set.
Note: If your View window area is the same as your Frame size, you will not be able to use the ePTZ function. For more details, refer to
"Audio and Video" on page 26.
Video Prole:
ePTZ Speed:
Arrow Buttons and Home
Button:
Input Preset Name:
Preset List:
This selects which video prole to use. For more
information, refer to "Audio and Video" on page 26.
You may select a value between 0 and 64. 0 is the
slowest and 64 is the fastest.
Use these buttons to move to a specic part of the
viewing area, which you can then set as a preset.
Click the Home button to return to the center of the
viewing area.
Enter the name of the preset you want to create,
then click the Add button to make a new preset.
If an existing preset has been selected from the
Preset List, you can change its name by typing in a
new name, then clicking the Rename button.
Click this dropdown box to see a list of all the
presets that have been created. You can select one,
then click the GoTo button to change the displayed
camera view to the preset. Clicking the Remove
button will delete the currently selected preset.
29D-Link DCS-2130 User Manual
Conguration
Preset Sequence: This section allows you to create a preset
sequence, which automatically moves the camera's
view between a set of preset views.
To add a preset to the sequence, select it from the
dropdown box at the bottom of this window, set the
Dwell time to determine how long the camera view
will stay at that preset, then click the Add button.
The preset name will appear in the list, followed by
the dwell time to view that preset for.
You can rearrange your presets in the sequence
by selecting a preset in the sequence, then clicking
the arrow buttons to move it higher or lower in the
current sequence.
Clicking the trash can button will remove the
currently selected preset from the sequence.
If you want to change the dwell time for a preset,
select it from the list, enter a new dwell time, then
click the Update button.
30D-Link DCS-2130 User Manual
Conguration
Motion Detection
Enabling Video Motion will allow your camera to use the motion detection feature. You may draw a nite motion area that will be used
for monitoring. After making any changes, click the Save Settings button to save your changes.
Enable Video Motion:
Sensitivity:
Percentage:
Draw Motion Area:
Erase Motion Area:
Select this box to enable the motion detection
feature of your camera.
Species the measurable difference between two
sequential images that would indicate motion. Please
enter a value between 0 and 100.
Species the amount of motion in the window being
monitored that is required to initiate an alert. If this
is set to 100%, motion is detected within the whole
window will trigger a snapshot.
Draw the motion detection area by dragging your
mouse in the window (indicated by the red square).
To erase a motion detection area, simply click on the
red square that you wish to remove.
Right clicking on the camera image brings up the
following menu options:
Select All: Draws a motion detection area over
the entire screen.
Clear All: Clears any motion detection areas that
have been drawn.
Restore: Restores the previously specied motion
detection areas.
31D-Link DCS-2130 User Manual
Conguration
Time and Date
This section allows you to automatically or manually congure, update, and maintain the internal system clock for your camera. After
making any changes, click the Save Settings button to save your changes.
Time Zone:
Enable Daylight Saving:
Auto Daylight Saving:
Set Date and Time Manually:
Offset:
Synchronize with NTP Server:
NTP Server:
Set the Date and Time
Manually:
Copy Your Computer's Time
Settings:
Select your time zone from the drop-down menu.
Select this to enable Daylight Saving Time.
Select this option to allow your camera to congure
the Daylight Saving settings automatically.
Selecting this option allows you to congure the
Daylight Saving date and time manually.
Sets the amount of time to be added or removed
when Daylight Saving is enabled.
Enable this feature to obtain time automatically from
an NTP server.
Network Time Protocol (NTP) synchronizes the
DCS-2130 with an Internet time server. Choose the
one that is closest to your location.
This option allows you to set the time and date
manually.
This will synchronize the time information from your
PC.
32D-Link DCS-2130 User Manual
Conguration
Event Setup
The Event Setup page includes 4 different sections.
• Event
• Server
• Media
• Recording
1. To add a new item - "event, server or media," click Add. A screen will appear and
allow you to update the elds accordingly.
2. To delete the selected item from the pull-down menu of event, server or media, click
Delete.
3. Click on the item name to pop up a window for modifying.
Note: You can add up to four events, ve servers, and ve media elds.
33D-Link DCS-2130 User Manual
Conguration
Application
In a typical application, when motion is detected, the DCS-2130 Network Camera sends images to a FTP server or via e-mail as
notications. As shown in the illustration below, an event can be triggered by many sources, such as motion detection or external
digital input devices. When an event is triggered, a specied action will be performed. You can congure the Network Camera to send
snapshots or videos to your e-mail address or FTP site.
ex.
Motion detection,
Periodically, Digital input,
System reboot
Event Condition
ex.
Snapshot, Video Clips
ex.
Email, FTP
Media
(what to send)
Server
(where to send)
Action
To start plotting an event, it is suggested to congure server and media columns rst so that the Network Camera will know what action
shall be performed when a trigger is activated.
34D-Link DCS-2130 User Manual
Conguration
Add Server
Server Name:
E-mail:
FTP:
Network Storage:
SD Card:
Enter the unique name of your server.
Enter the conguration for the target e-mail server
account.
Enter the conguration for the target FTP server
account.
Specify a network storage device. Only one network
storage device is supported.
Use the camera's onboard SD card storage.
You can congure up to 5 servers to save snapshots and/or video to. After making any changes, click the Save Settings button to save
your changes.
35D-Link DCS-2130 User Manual
Conguration
Add Media
Media Name:
Snapshot:
Source:
Send pre-event image(s) [0~4]:
Send post-event image(s)
[0~7]:
File name prex:
Add date and time sufx to le
name:
Enter an unique name for media type you want to
create.
Select this option to set the media type to snapshots.
Set the video prole to use as the media source.
Refer to "Audio and Video" on page 26 for more
information on video proles.
Set the number of pre-event images to take. Pre-
event images are images taken before the main
event snapshot is taken.
Set the number of post-event images to take. Post-
event images are images taken after the main event
snapshot is taken. You can set up to 7 post-event
images to be taken.
The prex name will be added on the le name.
Check it to add timing information as le name sufx.
There are three types of media, Snapshot, Video Clip, and System Log. After making any changes, click the Save Settings button to
save your changes.
36D-Link DCS-2130 User Manual
Conguration
Video clip:
Source:
Pre-event recording:
Maximum duration:
Maximum le size:
File name prex:
System log:
Select this option to set the media type to video clips.
Set the video prole to use as the media source.
Refer to "Audio and Video" on page 26 for more
information on video proles.
This sets how many seconds to record before the
main event video clip starts. You can record up to 4
seconds of pre-event video.
Set the maximum length of video to record for your
video clips.
Set the maximum le size to record for your video
clips.
This is the prex that will be added to the lename
of saved video clips.
Select this option to set the media type to system
logs. This will save the event to the camera system
log, but will not record any snapshots or video.
37D-Link DCS-2130 User Manual
Conguration
Add Event
Create and schedule up to 3 events with their own settings here. After making any changes, click the Save Settings button to save
your changes.
Event name:
Enable this event:
Priority:
Delay:
Trigger:
Video Motion Detection:
Periodic:
Digital input:
System Boot:
Network Lost:
Enter a name for the event.
Select this box to activate this event.
Set the priority for this event. The event with higher
priority will be executed rst.
Select the delay time before checking the next event.
It is being used for both events of motion detection
and digital input trigger.
Specify the input type that triggers the event.
Motion is detected during live video monitoring.
Select the windows that need to be monitored.
The event is triggered in specied intervals. The
trigger interval unit is in minutes.
The external trigger input to the camera.
Triggers an event when the system boots up.
Triggers an event when if the network connection is
lost.
38D-Link DCS-2130 User Manual
Conguration
Time:
Trigger D/O:
Server:
Select Always or enter the time interval.
Select to trigger the digital output for a specic
number of seconds when an event occurs.
Specify the location where the event information
should be saved to.
39D-Link DCS-2130 User Manual
Conguration
Add Recording
Recording entry name:
Enable this recording:
Priority:
Source:
Recording schedule:
Recording settings:
Destination:
Total cycling recording size:
The unique name of the entry.
Select this to enable the recording function.
Set the priority for this entry. The entry with a higher
priority value will be executed rst.
The source of the stream.
Scheduling the recording entry.
Conguring the setting for the recording.
Select the folder where the recording le will be
stored.
Please input a HDD volume between 1MB and
200GB for recording space. The recording data will
replace the oldest record when the total recording
size exceeds this value. For example, if each
recording le is 6MB, and the total cyclic recording
size is 600MB, then the camera will record 100 les
in the specied location (folder) and then will delete
the oldest le and create new le for cyclic recording.
Please note that if the free HDD space is not enough,
the recording will stop. Before you set up this option
please make sure your HDD has enough space, and
it is better to not save other les in the same folder
as recording les.
Here you can congure and schedule the recording settings. After making any changes, click the Save Settings button to save your
changes.
40D-Link DCS-2130 User Manual
Conguration
Size of each le for recording:
File Name Prex:
File size for each recording le. You may input the
value in the range of 200-5000.
The prex name will be added on the le name of
the recording le(s).
41D-Link DCS-2130 User Manual
Conguration
SD Card
Format SD Card:
View Recorded Picture:
Playback Recorded Video:
Refresh:
Click this icon to automatically format the SD card
and create "picture" & "video" folders.
If the picture les are stored on the SD card, click
on the picture folder and choose the picture le you
would like to view.
If video les are stored on the SD card, click on the
video folder and choose the video le you would like
to view.
Reloads the le and folder information from the SD
card.
Here you may browse and manage the recorded les which are stored on the SD card.
42D-Link DCS-2130 User Manual
Conguration
Advanced
This screen allows you to control the behavior of digital input and digital output devices. The I/O connector provides the physical
interface for digital output (DO) and digital input (DI) that is used for connecting a variety of external alarm devices such as IR-Sensors
and alarm relays. The digital input is used for connecting external alarm devices and once triggered images will be taken and e-mailed.
After making any changes, click the Save Settings button to save your changes.
Digital Input/Output
Select D/I or D/O Mode:
LED:
The camera will send a signal when an event is
triggered, depending upon the type of device connected
to the DI circuit.
N.C. stands for Normally Closed. This means that
the normal state of the circuit is closed. Therefore
events are triggered when the device status changes
to "Open."
N.O. stands for Normally Open. This means that the
normal state of the circuit is open. Therefore events
are triggered when the device status changes to
"Closed."
You may specify whether or not to illuminate the LED
on the side of the camera.
43D-Link DCS-2130 User Manual
Conguration
HTTPS
This page allows you to install and activate an HTTPS certicate for secure access to your camera. After making any changes, click the
Save Settings button to save your changes.
Enable HTTPS Secure
Connection:
Create Certicate Method:
Status:
Note:
Enable the HTTPS service.
Choose the way the certicate should be created.
Three options are available:
Create a self-signed certicate automatically
Create a self-signed certicate manually
Create a certicate request and install
Displays the status of the certicate.
The certicate cannot be removed while the HTTPS
is still enabled. To remove the certicate, you must
rst uncheck Enable HTTPS secure connection.
44D-Link DCS-2130 User Manual
Conguration
Access List
Here you can set access permissions for users to view your DCS-2130.
Allow list:
Start IP address:
End IP address:
Delete allow list:
Deny list:
Delete deny list:
The list of IP addresses that have the access right
to the camera.
The starting IP Address of the devices (such as a
computer) that have permission to access the video
of the camera. Click Add to save the changes made.
Note: A total of seven lists can be congured for
both columns.
The ending IP Address of the devices (such as a
computer) that have permission to access the video
of the camera.
Remove the customized setting from the Allow List.
The list of IP addresses that have no access rights
to the camera.
Remove the customized setting from the Delete List.
For example:
When the range of the Allowed List is set from
1.1.1.0 to 192.255.255.255 and the range of the
Denied List is set from 1.1.1.0 to 170.255.255.255.
Only users with IPs located between 171.0.0.0 and
192.255.255.255 can access the Network Camera.
Alowed
List
Denied
List
45D-Link DCS-2130 User Manual
Conguration
Maintenance
You may modify the name and administrator’s password of your camera, as well as add and manage the user accounts for accessing
the camera. You may also use this section to create a unique name and congure the OSD settings for your camera.
Admin Password Setting:
Add User Account:
User Name:
Password:
User List:
Camera Name:
Enable OSD:
Label:
Show Time:
Set a new password for the administrator’s account.
Add new user account.
The user name for the new account.
The password for the new account.
All the existing user accounts will be displayed here.
You may delete accounts includes in the list, but
please reserve at least one as guest.
Create a unique name for your camera that will
be added to the le name prex when creating a
snapshot or a video clip.
Select this option to enable the On-Screen Display
feature for your camera.
Enter a label for the camera.
Select this option to enable the time-stamp display
on the video screen.
Device Management
46D-Link DCS-2130 User Manual
Conguration
Backup and Restore
In this section, you may backup, restore and reset the camera conguration, or reboot the camera.
Save To Local Hard Drive:
Local From Local Hard Drive:
Restore to Factory Default:
Reboot Device:
You may save and document your current settings
into your computer.
Locate a pre-saved conguration by clicking
Browse and then restore the pre-dened settings to
your camera by clicking Load Conguration.
You may reset your camera and restore the factory
settings by clicking Restore Factory Defaults.
This will restart your camera.
47D-Link DCS-2130 User Manual
Conguration
Firmware Upgrade
The camera's current rmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest
available rmware version.
To upgrade the rmware on your DCS-2130, please download and save the latest rmware version from the D-Link Support Page to
your local hard drive. Locate the le on your local hard drive by clicking the Browse button. Select the le and click the Upload button
to start upgrading the rmware.
Current Firmware Version:
Current Product Name:
File Path:
Upload:
Displays the detected rmware version.
Displays the camera model name.
Locate the le (upgraded rmware) on your hard
drive by clicking Browse.
Uploads the new rmware to your camera.
48D-Link DCS-2130 User Manual
Conguration
Status
This page displays detailed information about your device and network connection.
Device Info
49D-Link DCS-2130 User Manual
Conguration
This page displays the log information of your camera. You may download the information by clicking Download. You may also click
Clear to delete the saved log information.
Logs
50D-Link DCS-2130 User Manual
Conguration
This page provides helpful information regarding camera operation.
Help
51D-Link DCS-2130 User Manual
Appendix
DI/DO Input Specications
Appendix
Pin 1 Pin 4
Pin 3Pin 2
PIN FUNCTION NOTE
1 Digital Out (DO) Uses an open-drain NFET transistor with the source connected to GND in camera.
If used with an external relay, a diode must be connected in parallel with the load
for protection against voltage transients. Max loading is 100 mA.
2 Digital In (DI) A switch from DI to DC 5 V, activated by setting NO. or NC.
3 DC5V OUTPUT DC 5 V Output / Max. 100 mA
4 GND GND
Internal 5V Power External 3~12V Power
DO
DI
5V
DND
N.C / N.O
100 mA
ALARM
Reed switch
Diode
DC Power 5V
R
DO
DI
5V
DND
N.C / N.O
ALARM
Reed switch
Diode
DC Power 5V
R
DC Power 3V~12V
100 mA
52D-Link DCS-2130 User Manual
Appendix
Technical Specications
Camera Camera Hardware
Profile
1/4” 1 Megapixel progressive CMOS sensor
Minimum illumination 1.0 lux
10x digital zoom
Fixed length 3.45 mm
Aperture F2.0
Angle of view:
(H) 57.8°
(V) 37.8°
(D) 66°
Image Features
Configurable image size, quality, frame rate, and bit rate
Time stamp and text overlays
Configurable motion detection windows
3 configurable privacy mask zones
Configurable shutter speed, brightness, saturation, contrast, and
sharpness
Video Compression
Simultaneous H.264/MPEG-4/MJPEG format compression
JPEG for still image
H.264/MPEG-4 multicast streaming
H.264/MPEG-4 multicast streaming
Video Resolution 16:9 - 1280 x 800, 1280 x 720, 800 x 450, 640 x 360, 480 x 270, 320 x 176, 176 x 144 at frame rates up to 30 fps
4:3 - 1024 x 768, 800 x 600, 640 x 480, 480 x 360, 320 x 240, 176 x 144 at frame rates up to 30 fps
Audio Support G.726
External Device
Interface
1 DI / 1 DO
Micro SD card slot
Built-in microphone
3.5mm audio output jack
Network Network Protocols IPv4, TCP/IP, UDP, ICMP, DHCP Client, NTP Client (D-Link), DNS Client, DDNS Client (D-Link), SMTP Client, FTP Client, HTTP / HTTPS,
Samba Client, PPPoE, UPnP Port Forwarding, RTP / RTSP/ RTCP, IP filtering, 3GPP, IGMP, ONVIF Compliant
Security
Administrator and user group protection
Password authentication
HTTP and RTSP digest encryption
53D-Link DCS-2130 User Manual
Appendix
System
Management
System
Requirements for
Web Interface
Operating System: Microsoft Windows 7/Vista/XP/2000
Browser: Internet Explorer, Firefox, Netscape, Opera
Event Management
Motion detection
Event notification and upload snapshots/video clips via HTTP,
SMTP, or FTP
Supports multiple HTTP, SMTP, and FTP servers
Multiple event notifications
Multiple recording methods for easy backup
Remote Management
Configuration accessible via web browser
Take snapshots/video clips and save to local hard drive or NAS via web browser
Mobile Support Windows 7/Vista/XP system, Pocket PC, or mobile phone with 3GPP playback support
D-ViewCam™
System
Requirements
Operating System: Microsoft Windows 7/Vista/XP
Web Browser: Internet Explorer 6 or higher
Protocol: Standard TCP/IP
D-ViewCam™
Software Functions
Remote management/control of up to 32 cameras
Viewing of up to 32 cameras on one screen
Supports all management functions provided in web interface
Scheduled motion triggered, or manual recording options
General Power Input 5 V DC 1.2 A, 50/60 Hz
Max. Power
Consumption
DCS-2103: 2 watts
DCS-2130: 2.5 watts
Operating
Temperature 0 to 40 ˚C (32 to 104 ˚F)
Storage Temperature -20 to 70 °C (-4 to 158 °F)
Humidity 20% to 80% non-condensing
Weight DCS-2103: 68 g
DCS-2130: 69 g
Certifications CE, CE LVD, FCC (Class B), C-Tick
Technical Specications
* This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
54D-Link DCS-2130 User Manual
Appendix
Dimensions
FCC Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
CAUTION: Change or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions
and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and installers must be
provide with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance."
Canada Notices
Industry Canada regulatory information
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
The user is cautioned that this device should be used only as specified within this
manual to meet RF exposure requirements. Use of this device in a manner
inconsistent with this manual could lead to excessive RF exposure conditions.

Navigation menu