D Link CS2130A1 HD Wireless N Cub Network Camera User Manual
D Link Corporation HD Wireless N Cub Network Camera
D Link >
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1504448 |
| Application ID | 49IImLfeHxS5ASZD5QLzYw== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 442.02kB (5525222 bits) |
| Date Submitted | 2011-07-19 00:00:00 |
| Date Available | 2011-07-19 00:00:00 |
| Creation Date | 2011-06-30 15:21:01 |
| Producing Software | Adobe PDF Library 9.0 |
| Document Lastmod | 2011-07-12 12:13:28 |
| Document Title | User manual |
| Document Creator | Adobe InDesign CS4 (6.0) |
Table of Contents Product Overview......................................................... 4 Package Contents.................................................... 4 System Requirements.............................................. 4 Hardware Overview...................................................... 5 Front................................................................... 5 Rear.................................................................... 6 Side..................................................................... 7 Installation..................................................................... 8 Starting the Camera Installation Wizard................... 8 Connecting Wirelessly Using WPS........................... 9 Configuration.............................................................. 10 Using the Configuration Menu................................ 10 Live Video............................................................... 11 Setup...................................................................... 13 Wizard............................................................... 13 Internet Connection Setup Wizard.................... 13 Motion Detection Setup Wizard........................ 16 Network Setup.................................................. 18 Wireless Setup.................................................. 21 Dynamic DNS................................................... 23 Image Setup..................................................... 24 Audio and Video............................................... 26 Preset............................................................... 28 Motion Detection............................................... 30 D-Link DCS-2130 User Manual Time and Date.................................................. 31 Event Setup...................................................... 32 Application..................................................... 33 Add Server..................................................... 34 Add Media...................................................... 35 Add Event...................................................... 37 Add Recording............................................... 39 SD Card............................................................ 41 Advanced................................................................ 42 Digital Input/Output........................................... 42 HTTPS.............................................................. 43 Access List........................................................ 44 Maintenance........................................................... 45 Device Management......................................... 45 Backup and Restore......................................... 46 Firmware Upgrade............................................ 47 Status..................................................................... 48 Device Info........................................................ 48 Logs.................................................................. 49 Help.................................................................. 50 Appendix..................................................................... 51 DI/DO Input Specifications..................................... 51 Technical Specifications......................................... 52 Preface D-Link reserves the right to revise this publication and to make changes in the contents hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description 1.0 June 14, 2011 DCS-2130 Revision A1 with firmware version 1.00 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright © 2011 D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc. D-Link DCS-2130 User Manual Product Overview Package Contents DCS-2130 Network Camera CAT5 Ethernet cable Power adapter Camera stand CD-ROM with User Manual and software Quick Installation Guide If any of the above items are missing, please contact your reseller. System Requirements Existing 10/100 Ethernet-based network or 802.11n/g wireless network Computer with Windows 7/Vista/XP for Camera Setup Wizard Internet Explorer, Firefox, Opera, or other web browser for web interface (Internet Explorer recommended for full functionality) If any of the above items are missing, please contact your reseller. D-Link DCS-2130 User Manual Hardware Overview Hardware Overview Front Camera Lens Records video of the surrounding area Status LED Indicates the camera's current status D-Link DCS-2130 User Manual Microphone Records audio from the surrounding area Hardware Overview Rear Power Connector Connects to the included DC 5 V power adapter Ethernet Connects to your network via an Ethernet cable WPS Button and LED Press this button, then press the WPS button on your router to set up a wireless connection automatically Reset Press and hold this button for 10 seconds to reset the camera D-Link DCS-2130 User Manual I/O Connector I/O connectors for external devices Adjustment Ring Tighten or loosen the adjustment ring to adjust the camera's position Base Holes Can be used with cable ties to attach camera to a surface Hardware Overview Side MicroSD Slot Accepts MicroSD flash memory cards for recording snapshots Audio Out Port Connects to an external speaker (optional) D-Link DCS-2130 User Manual Installation Starting the Camera Installation Wizard Insert the Installation CD-ROM into your computer’s optical drive to start the autorun program. The CD-ROM will open the Camera Setup Wizard. Simply click the Start button to go through the Setup Wizard, which will guide you through the setup process from connecting your hardware to configuring your camera. D-Link DCS-2130 User Manual Installation Connecting Wirelessly Using WPS Alternatively, you may create a wireless connection by using the WPS Button on the back of the camera. To create a WPS connection: Step 1 Press and hold the WPS button on the back of the camera for three seconds. The WPS status LED above the button will blink. Step 2 Press the WPS button on your router within 60 seconds. The WPS button is usually on the front or side of your router. On some routers, you may need to log in to the web interface and then click on an onscreen button to activate the WPS feature. If you are not sure where the WPS button is on your router, please refer to your router’s User Manual. The DCS-2130 will automatically create a wireless connection to your router. While connecting, the green LED will flash and your camera will reboot. D-Link DCS-2130 User Manual Configuration Using the Configuration Menu After completing the Camera Setup Wizard, you are ready to use your camera. The camera’s built-in Web configuration utility is designed to allow you to easily access and configure your DCS-2130. At the end of the wizard, click the Go To Camera button, or enter the IP address of your camera into a web browser, such as Internet Explorer. To log in, use the user name admin and the password you created in the Installation Wizard. If you did not create a password, the default password is blank. After entering your password, click the OK button. Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the default IP is 192.168.0.20. D-Link DCS-2130 User Manual 10 Configuration Live Video This section shows your camera’s live video. You may select any of the available icons listed below to operate the camera. You may also select your language using the drop-down menu on the left side of the screen. You can zoom in and out on the live video image using your mouse. Right-click to zoom out or left-click to zoom in on the image. Digital Input Indicator Motion Trigger Indicator This indicator will change color when a digital input signal is detected. This indicator will change color when a trigger event occurs. Recording Indicator Note: The video motion feature for your camera must be enabled. When a recording is in progress, this indicator will change color. Video Profile 1 Video Profile 2 Video Profile 3 Full screen mode Taking a Snapshot Recording a Video Clip Set a Storage Folder Listen/Stop Listening Talk/Stop Talking Control Pad This control pad can be used to pan, tilt, and zoom within the camera's predefined view area, if one has been defined. Start/Stop Digital Output D-Link DCS-2130 User Manual 11 Configuration Go To: If any presets have been defined, selecting a preset from this list (Preset List) will display it. SD Status: This option displays the status of the SD card. If no SD card has been inserted, this screen will display the message "Card Invalid." IO Status: This option displays the status of your I/O device if a device has been connected. PTZ Control: This camera uses electronic pan/tilt/zoom (ePTZ) to select and view areas of interest in the field of view. Please see page 26 for information about setting the frame size and view window area. ePTZ Speed: You may select a value between 0 and 64. 0 is the slowest and 64 is the fastest. Global View: This window indicates the total field of view (FOV) of the camera. The red box indicates the visible region of interest (ROI). Auto Pan Language: You may select the interface language using this menu. Stop Preset Path D-Link DCS-2130 User Manual Starts the automatic panning function. The ROI will pan from back and forth within the FOV Stops the camera ePTZ motion Starts the camera's motion along the predefined path 12 Configuration Setup Wizard To configure your Network Camera, click Internet Connection Setup Wizard. Alternatively, you may click Manual Internet Connection Setup to manually configure your Network Camera and skip to page 22. To quickly configure your Network Camera’s motion detection settings, click Motion Detection Setup Wizard. If you want to enter your settings without running the wizard, click Manual Motion Detection Setup and skip to page 27. Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the internet. Click Next to continue. Note: Select DHCP if you are unsure of which settings to choose. Click Next to continue. D-Link DCS-2130 User Manual 13 Configuration Select Static IP if your Internet Service Provider has provided you with connection settings, or if you wish to set a static address within your home network. Enter the correct configuration information and click Next to continue. If you are using PPPoE, select Enable PPPoE and enter your user name and password, otherwise click Next to continue. If you have a Dynamic DNS account and would like the camera to update your IP address automatically, Select Enable DDNS and enter your host information. Click Next to continue. Enter a name for your camera and click Next to continue. D-Link DCS-2130 User Manual 14 Configuration Configure the correct time to ensure that all events will be triggered as scheduled. Click Next to continue. If you have selected DHCP, you will see a summary of your settings, including the camera's IP address. Please write down all of this information as you will need it in order to access your camera. Click Apply to save your settings. D-Link DCS-2130 User Manual 15 Configuration Motion Detection Setup Wizard This wizard will guide you through a step-by-step process to configure your camera's motion detection functions. Click Next to continue. Step 1 This step will allow you to enable or disable motion detection, specify the detection sensitivity, and adjust the camera’s ability to detect movement. You may specify whether the camera should capture a snapshot or a video clip when motion is detected. Please see the Motion Detection section on page 27 for information about how to configure motion detection. Step 2 This step allows you to enable motion detection based on a customized schedule. Specify the day and hours. You may also choose to always record motion. D-Link DCS-2130 User Manual 16 Configuration Step 3 This step allows you to specify how you will receive event notifications from your camera. You may choose not to receive notifications, or to receive notifications via e-mail or FTP. Please enter the relevant information for your e-mail or FTP account. Click Next to continue. Step 4 You have completed the Motion Detection Wizard. Please verify your settings and click Apply to save them. Please wait a few moments while the camera saves your settings and restarts. D-Link DCS-2130 User Manual 17 Configuration Network Setup Use this section to configure the network connections for your camera. All relevant information must be entered accurately. After making any changes, click the Save Settings button to save your changes. LAN Settings: This section lets you configure settings for your local area network. DHCP: Select this connection if you have a DHCP server running on your network and would like your camera to obtain an IP address automatically. Static IP Address: You may obtain a static or fixed IP address and other network information from your network administrator for your camera. A static IP address may simplify access to your camera in the future. IP Address: Enter the fixed IP address in this field. Subnet Mask: This number is used to determine if the destination is in the same subnet. The default value is 255.255.255.0. Default Gateway: The gateway used to forward frames to destinations in a different subnet. Invalid gateway settings may cause the failure of transmissions to a different subnet. Primary DNS: The primary domain name server translates names to IP addresses. Secondary DNS: The secondary DNS acts as a backup to the primary DNS. D-Link DCS-2130 User Manual 18 Configuration Enable UPnP: Enabling this setting allows your camera to be configured as a UPnP device on your network. Enable UPnP Port Forwarding: Enabling this setting allows the camera to add port forwarding entries into the router automatically on a UPnP capable network. Enable PPPoE: Enable this setting if your network uses PPPoE. User Name / Password: Enter the username and password for your PPPoE account. Re-enter your password in the Confirm Password field. You may obtain this information from your ISP. HTTP Port: The default port number is 80. Access Name for Stream 1~3: The default name is video#.mjpg, where # is the number of the stream. HTTPS Port: You may use a PC with a secure browser to connect to the HTTPS port of the camera. The default port number is 443. RTSP Port: The port number that you use for RTSP streaming to mobile devices, such as mobile phones or PDAs. The default port number is 554. You may specify the address of a particular stream. For instance, live1. sdp can be accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents the ip address of your camera. D-Link DCS-2130 User Manual 19 Configuration Maximum Upload/Download Specifying the maximum download/upload bandwidth Bandwidth: for each socket can be useful when connecting your device to a busy or heavily loaded network. Entering a value of '0' indicates that the camera should not monitor bandwidth. Specifying other values will limit the camera's transfer speed to the specified number of kilobytes per second. D-Link DCS-2130 User Manual 20 Configuration Wireless Setup This section allows you to set up and configure the wireless settings on your camera. After making any changes, click the Save Settings button to save your changes. Site Survey: Click the Rescan button to scan for available wireless networks. After scanning, you can use the dropdown box to select an available wireless network. The related information (SSID, Wireless Mode, Channel, Authentication, Encryption) will be automatically filled in for you. SSID: Enter the SSID of the wireless access point you wish to use. Wireless Mode: Use the dropdown box to select the mode of the wireless network you wish to connect to. Infrastructure is normally used to connect to an access point or router. Ad-Hoc is usually used to connect directly to another computer. Channel: If you are using Ad Hoc mode, select the channel of the wireless network you wish to connect to, or select Auto. Authentication: Select the authentication you use on your wireless network - Open, Shared, WPA-PSK, or WPA2-PSK. Encryption: If you use WPA-PSK or WPA2-PSK authentication, you will need to specify whether your wireless network uses TKIP or AES encryption. If you use Open or Shared authentication, WEP encryption should be setting. D-Link DCS-2130 User Manual 21 Configuration Key: If you use WEP, WPA-PSK, or WPA2-PSK authentication, enter the Key (also known as password) used for your wireless network. D-Link DCS-2130 User Manual 22 Configuration Dynamic DNS DDNS (Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it has been modified. A user name and password are required when using the DDNS service. After making any changes, click the Save Settings button to save your changes. Enable DDNS: Select this checkbox to enable the DDNS function. Server Address: Select your Dynamic DNS provider from the pull down menu or enter the server address manually. Host Name: Enter the host name of the DDNS server. User Name: Enter the user name or e-mail used to connect to your DDNS account. Password: Enter the password used to connect to your DDNS server account. Timeout: Enter the DNS Timeout values you wish to use. Status: Indicates the connection status, which is automatically determined by the system. D-Link DCS-2130 User Manual 23 Configuration Image Setup In this section, you may configure the video image settings for your camera. A preview of the image will be shown in Live Video. Enable Privacy Mask: The Privacy Mask setting allows you to specify up to 3 rectangular areas on the camera's image to be blocked/excluded from recordings and snapshots. You may click and drag the mouse cursor over the camera image to draw a mask area. Right clicking on the camera image brings up the following menu options: Disable All: Disables all mask areas Enable All: Enables all mask areas Reset All: Clears all mask areas. Anti Flicker: If the video flickers, try enabling this setting. Mirror: This will mirror the image horizontally. Flip: This will flip the image vertically. When turning Flip on, you may want to consider turning Mirror on as well. Power Line: Select the frequency used by your power lines to avoid interference or distortion. White Balance: Use the dropdown box to change white balance settings to help balance colors for different environments. You can choose from Auto, Outdoor, Indoor, Fluorescent, and Push Hold. D-Link DCS-2130 User Manual 24 Configuration Exposure Mode: Changes the exposure mode. Use the dropdown box to set the camera for Indoor, Outdoor, or Night environments, or to Moving to capture moving objects. The Low_Noise option will focus on creating a high-quality picture without noise. You can also create 3 different custom exposure modes. The Max Gain setting will allow you to control the maximum amount of gain to apply to brighten the picture. Denoise: This setting controls the amount of noise reduction that will be applied to the picture. Brightness: Adjust this setting to compensate for backlit subjects. Contrast: Adjust this setting to alter the color intensity/strength. Saturation: This setting controls the amount of coloration, from grayscale to fully saturated. Sharpness: Specify a value from 0 to 8 to specify how much sharpening to apply to the image. Reset Default: Click this button to reset the image to factory default settings. D-Link DCS-2130 User Manual 25 Configuration Audio and Video You may configure up to 3 video profiles with different settings for your camera. Hence, you may set up different profiles for your computer and mobile display. In addition, you may also configure the two-way audio settings for your camera. After making any changes, click the Save Settings button to save your changes. Number of active profiles: You can use the dropdown box to set up to 3 active profiles. Aspect ratio: Set the aspect ratio of the video to 4:3 standard or 16:9 widescreen. Mode: Set the video codec to be used to JPEG, MPEG-4, or H.264. Frame size / View window Frame size determines the total capture resolution, area: and View window area determines the Live Video viewing window size. If the Frame size is larger than the Live Video size, you can use the ePTZ controls to look around. 16:9 1280 x 800, 1280 x 720, 800 x 450, 640 x 360, 480 x 270, 320 x 176, 176 x 144 4:3 1024 x 768, 800 x 600, 640 x 480, 480 x 360, 320 x 240, 176 x 144 Note: If your View window area is the same as your Frame size, you will not be able to use the ePTZ function. Maximum frame rate: A higher frame rate provides smoother motion for videos, and requires more bandwidth. Lower frame rates will result in stuttering motion, and requires less bandwidth. D-Link DCS-2130 User Manual 26 Configuration Video Quality: This limits the maximum frame rate, which can be combined with the "Fixed quality" option to optimize the bandwidth utilization and video quality. If fixed bandwidth utilization is desired regardless of the video quality, choose "Constant bit rate" and select the desired bandwidth. Constant bit rate: The bps will affect the bit rate of the video recorded by the camera. Higher bit rates result in higher video quality. Fixed quality: Select the image quality level for the camera to try to maintain. High quality levels will result in increased bit rates. Audio in off: Ticking this checkbox will mute incoming audio. Audio in gain level: This setting controls the amount of gain applied to incoming audio to increase its volume. Audio out off: Ticking this checkbox will mute outgoing audio. Audio out volume level: This setting controls the amount of gain applied to outgoing audio to increase its volume. D-Link DCS-2130 User Manual 27 Configuration Preset This screen allows you to set preset points for the ePTZ function of the camera, which allows you to look around the camera's viewable area by using a zoomed view. Presets allow you to quickly go to and view a specific part of the area your camera is covering, and you can create preset sequences, which will automatically change the camera's view between the different presets according to a defined order and timing you can set. Note: If your View window area is the same as your Frame size, you will not be able to use the ePTZ function. For more details, refer to "Audio and Video" on page 26. Video Profile: This selects which video profile to use. For more information, refer to "Audio and Video" on page 26. ePTZ Speed: You may select a value between 0 and 64. 0 is the slowest and 64 is the fastest. Arrow Buttons and Home Use these buttons to move to a specific part of the Button: viewing area, which you can then set as a preset. Click the Home button to return to the center of the viewing area. Input Preset Name: Enter the name of the preset you want to create, then click the Add button to make a new preset. If an existing preset has been selected from the Preset List, you can change its name by typing in a new name, then clicking the Rename button. Preset List: Click this dropdown box to see a list of all the presets that have been created. You can select one, then click the GoTo button to change the displayed camera view to the preset. Clicking the Remove button will delete the currently selected preset. D-Link DCS-2130 User Manual 28 Configuration Preset Sequence: This section allows you to create a preset sequence, which automatically moves the camera's view between a set of preset views. To add a preset to the sequence, select it from the dropdown box at the bottom of this window, set the Dwell time to determine how long the camera view will stay at that preset, then click the Add button. The preset name will appear in the list, followed by the dwell time to view that preset for. You can rearrange your presets in the sequence by selecting a preset in the sequence, then clicking the arrow buttons to move it higher or lower in the current sequence. Clicking the trash can button will remove the currently selected preset from the sequence. If you want to change the dwell time for a preset, select it from the list, enter a new dwell time, then click the Update button. D-Link DCS-2130 User Manual 29 Configuration Motion Detection Enabling Video Motion will allow your camera to use the motion detection feature. You may draw a finite motion area that will be used for monitoring. After making any changes, click the Save Settings button to save your changes. Enable Video Motion: Select this box to enable the motion detection feature of your camera. Sensitivity: Specifies the measurable difference between two sequential images that would indicate motion. Please enter a value between 0 and 100. Percentage: Specifies the amount of motion in the window being monitored that is required to initiate an alert. If this is set to 100%, motion is detected within the whole window will trigger a snapshot. Draw Motion Area: Draw the motion detection area by dragging your mouse in the window (indicated by the red square). Erase Motion Area: To erase a motion detection area, simply click on the red square that you wish to remove. Right clicking on the camera image brings up the following menu options: Select All: Draws a motion detection area over the entire screen. Clear All: Clears any motion detection areas that have been drawn. Restore: Restores the previously specified motion detection areas. D-Link DCS-2130 User Manual 30 Configuration Time and Date This section allows you to automatically or manually configure, update, and maintain the internal system clock for your camera. After making any changes, click the Save Settings button to save your changes. Time Zone: Select your time zone from the drop-down menu. Enable Daylight Saving: Select this to enable Daylight Saving Time. Auto Daylight Saving: Select this option to allow your camera to configure the Daylight Saving settings automatically. Set Date and Time Manually: Selecting this option allows you to configure the Daylight Saving date and time manually. Offset: Sets the amount of time to be added or removed when Daylight Saving is enabled. Synchronize with NTP Server: Enable this feature to obtain time automatically from an NTP server. NTP Server: Network Time Protocol (NTP) synchronizes the DCS-2130 with an Internet time server. Choose the one that is closest to your location. Set the Date and Time This option allows you to set the time and date Manually: manually. Copy Your Computer's Time This will synchronize the time information from your Settings: PC. D-Link DCS-2130 User Manual 31 Configuration Event Setup The Event Setup page includes 4 different sections. • Event • Server • Media • Recording 1. To add a new item - "event, server or media," click Add. A screen will appear and allow you to update the fields accordingly. 2. To delete the selected item from the pull-down menu of event, server or media, click Delete. 3. Click on the item name to pop up a window for modifying. Note: You can add up to four events, five servers, and five media fields. D-Link DCS-2130 User Manual 32 Configuration Application In a typical application, when motion is detected, the DCS-2130 Network Camera sends images to a FTP server or via e-mail as notifications. As shown in the illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is triggered, a specified action will be performed. You can configure the Network Camera to send snapshots or videos to your e-mail address or FTP site. Action Event Condition ex. Motion detection, Periodically, Digital input, System reboot Media (what to send) ex. Snapshot, Video Clips Server (where to send) ex. Email, FTP To start plotting an event, it is suggested to configure server and media columns first so that the Network Camera will know what action shall be performed when a trigger is activated. D-Link DCS-2130 User Manual 33 Configuration Add Server You can configure up to 5 servers to save snapshots and/or video to. After making any changes, click the Save Settings button to save your changes. Server Name: Enter the unique name of your server. E-mail: Enter the configuration for the target e-mail server account. FTP: Enter the configuration for the target FTP server account. Network Storage: Specify a network storage device. Only one network storage device is supported. SD Card: Use the camera's onboard SD card storage. D-Link DCS-2130 User Manual 34 Configuration Add Media There are three types of media, Snapshot, Video Clip, and System Log. After making any changes, click the Save Settings button to save your changes. Media Name: Enter an unique name for media type you want to create. Snapshot: Select this option to set the media type to snapshots. Source: Set the video profile to use as the media source. Refer to "Audio and Video" on page 26 for more information on video profiles. Send pre-event image(s) [0~4]: Set the number of pre-event images to take. Preevent images are images taken before the main event snapshot is taken. Send post-event image(s) Set the number of post-event images to take. Post[0~7]: event images are images taken after the main event snapshot is taken. You can set up to 7 post-event images to be taken. File name prefix: The prefix name will be added on the file name. Add date and time suffix to file Check it to add timing information as file name suffix. name: D-Link DCS-2130 User Manual 35 Configuration Video clip: Select this option to set the media type to video clips. Source: Set the video profile to use as the media source. Refer to "Audio and Video" on page 26 for more information on video profiles. Pre-event recording: This sets how many seconds to record before the main event video clip starts. You can record up to 4 seconds of pre-event video. Maximum duration: Set the maximum length of video to record for your video clips. Maximum file size: Set the maximum file size to record for your video clips. File name prefix: This is the prefix that will be added to the filename of saved video clips. System log: Select this option to set the media type to system logs. This will save the event to the camera system log, but will not record any snapshots or video. D-Link DCS-2130 User Manual 36 Configuration Add Event Create and schedule up to 3 events with their own settings here. After making any changes, click the Save Settings button to save your changes. Event name: Enter a name for the event. Enable this event: Select this box to activate this event. Priority: Set the priority for this event. The event with higher priority will be executed first. Delay: Select the delay time before checking the next event. It is being used for both events of motion detection and digital input trigger. Trigger: Specify the input type that triggers the event. Video Motion Detection: Motion is detected during live video monitoring. Select the windows that need to be monitored. Periodic: The event is triggered in specified intervals. The trigger interval unit is in minutes. Digital input: The external trigger input to the camera. System Boot: Triggers an event when the system boots up. Network Lost: Triggers an event when if the network connection is lost. D-Link DCS-2130 User Manual 37 Configuration Time: Select Always or enter the time interval. Trigger D/O: Select to trigger the digital output for a specific number of seconds when an event occurs. Server: Specify the location where the event information should be saved to. D-Link DCS-2130 User Manual 38 Configuration Add Recording Here you can configure and schedule the recording settings. After making any changes, click the Save Settings button to save your changes. Recording entry name: The unique name of the entry. Enable this recording: Select this to enable the recording function. Priority: Set the priority for this entry. The entry with a higher priority value will be executed first. Source: The source of the stream. Recording schedule: Scheduling the recording entry. Recording settings: Configuring the setting for the recording. Destination: Select the folder where the recording file will be stored. Total cycling recording size: Please input a HDD volume between 1MB and 200GB for recording space. The recording data will replace the oldest record when the total recording size exceeds this value. For example, if each recording file is 6MB, and the total cyclic recording size is 600MB, then the camera will record 100 files in the specified location (folder) and then will delete the oldest file and create new file for cyclic recording. Please note that if the free HDD space is not enough, the recording will stop. Before you set up this option please make sure your HDD has enough space, and it is better to not save other files in the same folder as recording files. D-Link DCS-2130 User Manual 39 Configuration Size of each file for recording: File size for each recording file. You may input the value in the range of 200-5000. File Name Prefix: The prefix name will be added on the file name of the recording file(s). D-Link DCS-2130 User Manual 40 Configuration SD Card Here you may browse and manage the recorded files which are stored on the SD card. Format SD Card: Click this icon to automatically format the SD card and create "picture" & "video" folders. View Recorded Picture: If the picture files are stored on the SD card, click on the picture folder and choose the picture file you would like to view. Playback Recorded Video: If video files are stored on the SD card, click on the video folder and choose the video file you would like to view. Refresh: Reloads the file and folder information from the SD card. D-Link DCS-2130 User Manual 41 Configuration Advanced Digital Input/Output This screen allows you to control the behavior of digital input and digital output devices. The I/O connector provides the physical interface for digital output (DO) and digital input (DI) that is used for connecting a variety of external alarm devices such as IR-Sensors and alarm relays. The digital input is used for connecting external alarm devices and once triggered images will be taken and e-mailed. After making any changes, click the Save Settings button to save your changes. Select D/I or D/O Mode: The camera will send a signal when an event is triggered, depending upon the type of device connected to the DI circuit. N.C. stands for Normally Closed. This means that the normal state of the circuit is closed. Therefore events are triggered when the device status changes to "Open." N.O. stands for Normally Open. This means that the normal state of the circuit is open. Therefore events are triggered when the device status changes to "Closed." LED: You may specify whether or not to illuminate the LED on the side of the camera. D-Link DCS-2130 User Manual 42 Configuration HTTPS This page allows you to install and activate an HTTPS certificate for secure access to your camera. After making any changes, click the Save Settings button to save your changes. Enable HTTPS Secure Enable the HTTPS service. Connection: Create Certificate Method: Choose the way the certificate should be created. Three options are available: Create a self-signed certificate automatically Create a self-signed certificate manually Create a certificate request and install Status: Displays the status of the certificate. Note: The certificate cannot be removed while the HTTPS is still enabled. To remove the certificate, you must first uncheck Enable HTTPS secure connection. D-Link DCS-2130 User Manual 43 Configuration Access List Here you can set access permissions for users to view your DCS-2130. Allow list: The list of IP addresses that have the access right to the camera. Start IP address: The starting IP Address of the devices (such as a computer) that have permission to access the video of the camera. Click Add to save the changes made. Note: A total of seven lists can be configured for both columns. End IP address: The ending IP Address of the devices (such as a computer) that have permission to access the video of the camera. Delete allow list: Remove the customized setting from the Allow List. Deny list: The list of IP addresses that have no access rights to the camera. Delete deny list: Remove the customized setting from the Delete List. For example: When the range of the Allowed List is set from 1.1.1.0 to 192.255.255.255 and the range of the Denied List is set from 1.1.1.0 to 170.255.255.255. Only users with IPs located between 171.0.0.0 and 192.255.255.255 can access the Network Camera. D-Link DCS-2130 User Manual Alowed List Denied List 44 Configuration Maintenance Device Management You may modify the name and administrator’s password of your camera, as well as add and manage the user accounts for accessing the camera. You may also use this section to create a unique name and configure the OSD settings for your camera. Admin Password Setting: Set a new password for the administrator’s account. Add User Account: Add new user account. User Name: The user name for the new account. Password: The password for the new account. User List: All the existing user accounts will be displayed here. You may delete accounts includes in the list, but please reserve at least one as guest. Camera Name: Create a unique name for your camera that will be added to the file name prefix when creating a snapshot or a video clip. Enable OSD: Select this option to enable the On-Screen Display feature for your camera. Label: Enter a label for the camera. Show Time: Select this option to enable the time-stamp display on the video screen. D-Link DCS-2130 User Manual 45 Configuration Backup and Restore In this section, you may backup, restore and reset the camera configuration, or reboot the camera. Save To Local Hard Drive: You may save and document your current settings into your computer. Local From Local Hard Drive: Locate a pre-saved configuration by clicking Browse and then restore the pre-defined settings to your camera by clicking Load Configuration. Restore to Factory Default: You may reset your camera and restore the factory settings by clicking Restore Factory Defaults. Reboot Device: This will restart your camera. D-Link DCS-2130 User Manual 46 Configuration Firmware Upgrade The camera's current firmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available firmware version. To upgrade the firmware on your DCS-2130, please download and save the latest firmware version from the D-Link Support Page to your local hard drive. Locate the file on your local hard drive by clicking the Browse button. Select the file and click the Upload button to start upgrading the firmware. Current Firmware Version: Displays the detected firmware version. Current Product Name: Displays the camera model name. File Path: Locate the file (upgraded firmware) on your hard drive by clicking Browse. Upload: Uploads the new firmware to your camera. D-Link DCS-2130 User Manual 47 Configuration Status Device Info This page displays detailed information about your device and network connection. D-Link DCS-2130 User Manual 48 Configuration Logs This page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information. D-Link DCS-2130 User Manual 49 Configuration Help This page provides helpful information regarding camera operation. D-Link DCS-2130 User Manual 50 Appendix DI/DO Input Specifications Pin 1 Pin 4 Pin 2 PIN Pin 3 NOTE FUNCTION Digital Out (DO) Uses an open-drain NFET transistor with the source connected to GND in camera. If used with an external relay, a diode must be connected in parallel with the load for protection against voltage transients. Max loading is 100 mA. Digital In (DI) A switch from DI to DC 5 V, activated by setting NO. or NC. DC5V OUTPUT DC 5 V Output / Max. 100 mA GND GND Internal 5V Power External 3~12V Power DND DND DC Power 5V DC Power 5V 5V DI N.C / N.O 5V DI N.C / N.O Reed switch DC Power 3V~12V Reed switch DO 100 mA DO Diode ALARM D-Link DCS-2130 User Manual 100 mA Diode ALARM 51 Appendix Technical Specifications Camera Network Camera Hardware Profile 1/4” 1 Megapixel progressive CMOS sensor Minimum illumination 1.0 lux 10x digital zoom Fixed length 3.45 mm Aperture F2.0 Angle of view: (H) 57.8° (V) 37.8° (D) 66° Image Features Configurable image size, quality, frame rate, and bit rate Time stamp and text overlays Configurable motion detection windows 3 configurable privacy mask zones Configurable shutter speed, brightness, saturation, contrast, and sharpness Video Compression Simultaneous H.264/MPEG-4/MJPEG format compression JPEG for still image H.264/MPEG-4 multicast streaming H.264/MPEG-4 multicast streaming Video Resolution 16:9 - 1280 x 800, 1280 x 720, 800 x 450, 640 x 360, 480 x 270, 320 x 176, 176 x 144 at frame rates up to 30 fps 4:3 - 1024 x 768, 800 x 600, 640 x 480, 480 x 360, 320 x 240, 176 x 144 at frame rates up to 30 fps Audio Support G.726 External Device Interface 1 DI / 1 DO Micro SD card slot Network Protocols IPv4, TCP/IP, UDP, ICMP, DHCP Client, NTP Client (D-Link), DNS Client, DDNS Client (D-Link), SMTP Client, FTP Client, HTTP / HTTPS, Samba Client, PPPoE, UPnP Port Forwarding, RTP / RTSP/ RTCP, IP filtering, 3GPP, IGMP, ONVIF Compliant Security Administrator and user group protection Password authentication D-Link DCS-2130 User Manual Built-in microphone 3.5mm audio output jack HTTP and RTSP digest encryption 52 Appendix Technical Specifications System Management System Requirements for Web Interface Operating System: Microsoft Windows 7/Vista/XP/2000 Browser: Internet Explorer, Firefox, Netscape, Opera Event Management Motion detection Event notification and upload snapshots/video clips via HTTP, SMTP, or FTP Supports multiple HTTP, SMTP, and FTP servers Multiple event notifications Multiple recording methods for easy backup Remote Management Configuration accessible via web browser Take snapshots/video clips and save to local hard drive or NAS via web browser General Mobile Support Windows 7/Vista/XP system, Pocket PC, or mobile phone with 3GPP playback support D-ViewCam™ System Requirements Operating System: Microsoft Windows 7/Vista/XP Web Browser: Internet Explorer 6 or higher Protocol: Standard TCP/IP D-ViewCam™ Software Functions Remote management/control of up to 32 cameras Viewing of up to 32 cameras on one screen Supports all management functions provided in web interface Scheduled motion triggered, or manual recording options Power Input 5 V DC 1.2 A, 50/60 Hz Max. Power Consumption DCS-2103: 2 watts DCS-2130: 2.5 watts Operating Temperature 0 to 40 ˚C (32 to 104 ˚F) Storage Temperature -20 to 70 °C (-4 to 158 °F) Humidity 20% to 80% non-condensing Weight DCS-2103: 68 g DCS-2130: 69 g Certifications CE, CE LVD, FCC (Class B), C-Tick * This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. D-Link DCS-2130 User Manual 53 Appendix Dimensions D-Link DCS-2130 User Manual 54 FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance." Canada Notices Industry Canada regulatory information Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The user is cautioned that this device should be used only as specified within this manual to meet RF exposure requirements. Use of this device in a manner inconsistent with this manual could lead to excessive RF exposure conditions.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2011:06:30 15:21:01+08:00 Creator : Adobe InDesign CS4 (6.0) Modify Date : 2011:07:12 12:13:28+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2011:07:12 12:13:28+08:00 Creator Tool : Adobe InDesign CS4 (6.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 6780 bytes, use -b option to extract) Instance ID : uuid:d427f349-a3a2-4268-96f3-f710c536c9dc Document ID : xmp.did:A0322299409EE0118CBAC9FC4F6507D6 Original Document ID : adobe:docid:indd:9e7efc74-d8a1-11de-aba4-a935150e3b05 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:9F322299409EE0118CBAC9FC4F6507D6 Derived From Document ID : xmp.did:AE6683C16C96E01186DBD7D1F8F43386 Derived From Original Document ID: adobe:docid:indd:9e7efc74-d8a1-11de-aba4-a935150e3b05 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:337802F7C181E0119DCD9EC25512CA70, xmp.iid:9958275BEB81E0119DCD9EC25512CA70, xmp.iid:9D58275BEB81E0119DCD9EC25512CA70, xmp.iid:9E58275BEB81E0119DCD9EC25512CA70, xmp.iid:9F58275BEB81E0119DCD9EC25512CA70, xmp.iid:DA2F9359C182E011B22C800583233208, xmp.iid:E41A0022C682E011960C8C23C9C7B156, xmp.iid:E61A0022C682E011960C8C23C9C7B156, xmp.iid:E71A0022C682E011960C8C23C9C7B156, xmp.iid:E81A0022C682E011960C8C23C9C7B156, xmp.iid:E91A0022C682E011960C8C23C9C7B156, xmp.iid:3AE28B88EB84E0118F12B558F834DB08, xmp.iid:90B51D4DED84E0118F12B558F834DB08, xmp.iid:95B51D4DED84E0118F12B558F834DB08, xmp.iid:96B51D4DED84E0118F12B558F834DB08, xmp.iid:EFDA323FEC85E011BA15A237EFE4C752, xmp.iid:77BCFA314B8BE01180D8EF81BCCAB285, xmp.iid:78BCFA314B8BE01180D8EF81BCCAB285, xmp.iid:2329D973718BE011970CB2B44D1BD337, xmp.iid:2629D973718BE011970CB2B44D1BD337, xmp.iid:2729D973718BE011970CB2B44D1BD337, xmp.iid:2829D973718BE011970CB2B44D1BD337, xmp.iid:2929D973718BE011970CB2B44D1BD337, xmp.iid:2A29D973718BE011970CB2B44D1BD337, xmp.iid:883ABCB3358CE011A208CB76ED4A6603, xmp.iid:893ABCB3358CE011A208CB76ED4A6603, xmp.iid:8A3ABCB3358CE011A208CB76ED4A6603, xmp.iid:8B3ABCB3358CE011A208CB76ED4A6603, xmp.iid:A49B1D1EB68DE011A94C994613E3F42D, xmp.iid:A59B1D1EB68DE011A94C994613E3F42D, xmp.iid:A69B1D1EB68DE011A94C994613E3F42D, xmp.iid:4A4CCE48B490E0119B4AA50B692115E1, xmp.iid:44F03A384092E0119B72B2FCA92BF737, xmp.iid:45F03A384092E0119B72B2FCA92BF737, xmp.iid:46F03A384092E0119B72B2FCA92BF737, xmp.iid:0A22EB775A92E0119B72B2FCA92BF737, xmp.iid:0F22EB775A92E0119B72B2FCA92BF737, xmp.iid:1022EB775A92E0119B72B2FCA92BF737, xmp.iid:1122EB775A92E0119B72B2FCA92BF737, xmp.iid:1222EB775A92E0119B72B2FCA92BF737, xmp.iid:1322EB775A92E0119B72B2FCA92BF737, xmp.iid:ADF450DB7492E0119B72B2FCA92BF737, xmp.iid:157C95158592E011B62DA98FA8FBA084, xmp.iid:167C95158592E011B62DA98FA8FBA084, xmp.iid:DA8198473996E0118DDB9E5ADDD36883, xmp.iid:DB8198473996E0118DDB9E5ADDD36883, xmp.iid:DC8198473996E0118DDB9E5ADDD36883, xmp.iid:DD8198473996E0118DDB9E5ADDD36883, xmp.iid:DE8198473996E0118DDB9E5ADDD36883, xmp.iid:DF8198473996E0118DDB9E5ADDD36883, xmp.iid:62C4E2985796E01186DBD7D1F8F43386, xmp.iid:63C4E2985796E01186DBD7D1F8F43386, xmp.iid:64C4E2985796E01186DBD7D1F8F43386, xmp.iid:65C4E2985796E01186DBD7D1F8F43386, xmp.iid:66C4E2985796E01186DBD7D1F8F43386, xmp.iid:67C4E2985796E01186DBD7D1F8F43386, xmp.iid:68C4E2985796E01186DBD7D1F8F43386, xmp.iid:69C4E2985796E01186DBD7D1F8F43386, xmp.iid:6AC4E2985796E01186DBD7D1F8F43386, xmp.iid:6BC4E2985796E01186DBD7D1F8F43386, xmp.iid:6CC4E2985796E01186DBD7D1F8F43386, xmp.iid:BD7295BF6096E01186DBD7D1F8F43386, xmp.iid:BE7295BF6096E01186DBD7D1F8F43386, xmp.iid:BF7295BF6096E01186DBD7D1F8F43386, xmp.iid:C07295BF6096E01186DBD7D1F8F43386, xmp.iid:C17295BF6096E01186DBD7D1F8F43386, xmp.iid:C27295BF6096E01186DBD7D1F8F43386, xmp.iid:C37295BF6096E01186DBD7D1F8F43386, xmp.iid:C47295BF6096E01186DBD7D1F8F43386, xmp.iid:C57295BF6096E01186DBD7D1F8F43386, xmp.iid:97F322B46B96E011B8CBE0A97110AF23, xmp.iid:C67295BF6096E01186DBD7D1F8F43386, xmp.iid:C77295BF6096E01186DBD7D1F8F43386, xmp.iid:AB6683C16C96E01186DBD7D1F8F43386, xmp.iid:AC6683C16C96E01186DBD7D1F8F43386, xmp.iid:AD6683C16C96E01186DBD7D1F8F43386, xmp.iid:AE6683C16C96E01186DBD7D1F8F43386, xmp.iid:42CC4534F196E011BEF4D6DD27464416, xmp.iid:43CC4534F196E011BEF4D6DD27464416, xmp.iid:44CC4534F196E011BEF4D6DD27464416, xmp.iid:45CC4534F196E011BEF4D6DD27464416, xmp.iid:46CC4534F196E011BEF4D6DD27464416, xmp.iid:47CC4534F196E011BEF4D6DD27464416, xmp.iid:48CC4534F196E011BEF4D6DD27464416, xmp.iid:82C75144F497E011AFA0B169D1C4B30C, xmp.iid:71E3E324FA97E011AFA0B169D1C4B30C, xmp.iid:72E3E324FA97E011AFA0B169D1C4B30C, xmp.iid:73E3E324FA97E011AFA0B169D1C4B30C, xmp.iid:9A322299409EE0118CBAC9FC4F6507D6, xmp.iid:9B322299409EE0118CBAC9FC4F6507D6, xmp.iid:9E322299409EE0118CBAC9FC4F6507D6, xmp.iid:9F322299409EE0118CBAC9FC4F6507D6, xmp.iid:A0322299409EE0118CBAC9FC4F6507D6, xmp.iid:A1322299409EE0118CBAC9FC4F6507D6, xmp.iid:FCB90ADCC7A2E011AA69DC1138846E6D, xmp.iid:FDB90ADCC7A2E011AA69DC1138846E6D, xmp.iid:FEB90ADCC7A2E011AA69DC1138846E6D, xmp.iid:37126280E1A2E011AA69DC1138846E6D, xmp.iid:3F126280E1A2E011AA69DC1138846E6D, xmp.iid:40126280E1A2E011AA69DC1138846E6D, xmp.iid:6247681BE9A2E011AA69DC1138846E6D History When : 2011:05:19 15:41:06+08:00, 2011:05:19 15:41:06+08:00, 2011:05:19 18:49:56+08:00, 2011:05:19 18:52:40+08:00, 2011:05:19 18:56:49+08:00, 2011:05:20 17:12:56+08:00, 2011:05:20 18:11:16+08:00, 2011:05:20 18:18:17+08:00, 2011:05:20 18:21:35+08:00, 2011:05:20 18:48:36+08:00, 2011:05:20 18:51:21+08:00, 2011:05:23 11:31:49+08:00, 2011:05:23 11:32:35+08:00, 2011:05:23 17:37:19+08:00, 2011:05:23 17:37:20+08:00, 2011:05:24 17:57:34+08:00, 2011:05:31 13:59:49+08:00, 2011:05:31 13:59:50+08:00, 2011:05:31 18:33:41+08:00, 2011:06:01 10:46:26+08:00, 2011:06:01 11:53:16+08:00, 2011:06:01 12:18:52+08:00, 2011:06:01 12:20:51+08:00, 2011:06:01 13:48:28+08:00, 2011:06:01 17:58:29+08:00, 2011:06:01 18:01:35+08:00, 2011:06:01 18:02:56+08:00, 2011:06:01 18:05:25+08:00, 2011:06:03 17:44:17+08:00, 2011:06:03 17:44:18+08:00, 2011:06:03 19:06:17+08:00, 2011:06:07 18:41:38+08:00, 2011:06:09 11:11:11+08:00, 2011:06:09 11:28:49+08:00, 2011:06:09 11:32:19+08:00, 2011:06:09 13:59:43+08:00, 2011:06:09 16:16:47+08:00, 2011:06:09 16:37:41+08:00, 2011:06:09 16:43:09+08:00, 2011:06:09 16:44:15+08:00, 2011:06:09 16:45:40+08:00, 2011:06:09 16:45:41+08:00, 2011:06:09 18:41:51+08:00, 2011:06:09 18:47:37+08:00, 2011:06:14 11:49:17+08:00, 2011:06:14 11:49:52+08:00, 2011:06:14 11:53:41+08:00, 2011:06:14 11:59:28+08:00, 2011:06:14 12:01:04+08:00, 2011:06:14 12:02:46+08:00, 2011:06:14 15:26:19+08:00, 2011:06:14 15:46:07+08:00, 2011:06:14 15:50:42+08:00, 2011:06:14 15:53:10+08:00, 2011:06:14 15:59:02+08:00, 2011:06:14 16:02:12+08:00, 2011:06:14 16:02:59+08:00, 2011:06:14 16:07:42+08:00, 2011:06:14 16:08:09+08:00, 2011:06:14 16:09:23+08:00, 2011:06:14 16:11:24+08:00, 2011:06:14 16:31:49+08:00, 2011:06:14 16:32:06+08:00, 2011:06:14 16:33:07+08:00, 2011:06:14 16:33:22+08:00, 2011:06:14 16:46:10+08:00, 2011:06:14 16:49:21+08:00, 2011:06:14 17:03:03+08:00, 2011:06:14 17:17:07+08:00, 2011:06:14 17:21:17+08:00, 2011:06:14 17:50:14+08:00, 2011:06:14 17:57:02+08:00, 2011:06:14 17:57:46+08:00, 2011:06:14 17:57:46+08:00, 2011:06:14 18:00:20+08:00, 2011:06:14 18:01:05+08:00, 2011:06:14 18:01:05+08:00, 2011:06:15 09:45:52+08:00, 2011:06:15 09:46:26+08:00, 2011:06:15 09:50:03+08:00, 2011:06:15 09:51:22+08:00, 2011:06:15 09:52:51+08:00, 2011:06:15 09:59:54+08:00, 2011:06:15 10:09:48+08:00, 2011:06:16 16:40:19+08:00, 2011:06:16 17:43:46+08:00, 2011:06:16 19:19:20+08:00, 2011:06:16 19:27:28+08:00, 2011:06:24 17:01:50+08:00, 2011:06:24 17:03:04+08:00, 2011:06:24 17:08:48+08:00, 2011:06:24 17:10:13+08:00, 2011:06:24 17:10:13+08:00, 2011:06:24 17:14:18+08:00, 2011:06:30 14:08:50+08:00, 2011:06:30 14:09:51+08:00, 2011:06:30 14:10:30+08:00, 2011:06:30 14:24:54+08:00, 2011:06:30 15:06:02+08:00, 2011:06:30 15:07:18+08:00, 2011:06:30 15:18:16+08:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, / Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 150.00, 150.00, 150.00, 300.00, 150.00, 300.00, 72.00, 72.00, 150.00, 72.00, 72.00, 600.00 Manifest Placed Y Resolution : 150.00, 150.00, 150.00, 300.00, 150.00, 300.00, 72.00, 72.00, 150.00, 72.00, 72.00, 600.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:0ACFFA707192E0118F3BE12153DC0719, uuid:EC774FB74D8BE011B68BC617F0BE83A7, uuid:EC774FB74D8BE011B68BC617F0BE83A7, xmp.iid:C43A5097B54EE011AC02957BC1154B8A, uuid:E83E23684D8BE011B68BC617F0BE83A7, xmp.iid:C43A5097B54EE011AC02957BC1154B8A, uuid:adfb7cd1-799f-4398-9e23-07d7962c245a, uuid:8d97da8a-9878-4159-932d-c14734a2aa84, uuid:E63E23684D8BE011B68BC617F0BE83A7, uuid:dcaa6095-90c2-4d22-bae4-33a4a86f86b2, uuid:0368ecb0-3e87-4248-b324-fcbe6afc2817, uuid:431545B1066CE01196C2F259F2218247 Manifest Reference Document ID : uuid:09CFFA707192E0118F3BE12153DC0719, xmp.did:74307F1FA84EE011AC02957BC1154B8A, xmp.did:74307F1FA84EE011AC02957BC1154B8A, xmp.did:6B307F1FA84EE011AC02957BC1154B8A, xmp.did:70307F1FA84EE011AC02957BC1154B8A, xmp.did:6B307F1FA84EE011AC02957BC1154B8A, uuid:0D431861BFC4DC11BE52E5374C0C2335, uuid:BE61778ACC56DC119D94AEC773E1D117, xmp.did:6B307F1FA84EE011AC02957BC1154B8A, xmp.did:E08716160498E011B0CC97D0931A743B, xmp.did:DF8716160498E011B0CC97D0931A743B, uuid:8707F1DD016CE011A055E733DA9CEA71 Doc Change Count : 11132 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 56EXIF Metadata provided by EXIF.tools