D Link CS2230A1 Full HD Wireless N Cube Network Camera User Manual

D Link Corporation Full HD Wireless N Cube Network Camera

User manual

2D-Link DCS-2210/2230 User Manual Table of ContentsProduct Overview ........................................................ 4Package Contents ................................................... 4System Requirements ............................................. 4Hardware Overview ..................................................... 5Front ..................................................................5Rear ................................................................... 6Side ....................................................................7Conguration with Wizard ........................................ 8Conguration ............................................................. 13Web-based Conguration Utility ............................13D-ViewCam Setup Wizard ...............................15Live Video ..............................................................17Setup .....................................................................19Wizard .............................................................. 19Internet Connection Setup Wizard ................... 19Motion Detection Setup Wizard .......................22Network Setup .................................................24Wireless Setup(DCS-2230 only) ...................... 27Dynamic DNS ..................................................29Image Setup ....................................................30Audio and Video ..............................................32Preset ..............................................................34Motion Detection .............................................. 36Time and Date .................................................37Event Setup .....................................................38Application .................................................... 39Add Server .................................................... 40Add Media ..................................................... 41Add Event ..................................................... 43Add Recording .............................................. 45SD Card ........................................................... 47Advanced ............................................................... 48Digital Input/Output .......................................... 48ICR and IR ....................................................... 49HTTPS ............................................................. 50Access List ....................................................... 51Maintenance ..........................................................52Device Management ........................................ 52Backup and Restore ........................................53Firmware Upgrade ........................................... 54Status .................................................................... 55Device Info ....................................................... 55Logs ................................................................. 56Help .................................................................57Appendix .................................................................... 58DI/DO Input Specications ....................................58Technical Specications ........................................59Technical Specications ........................................60
3D-Link DCS-2210/2230 User Manual D-Link reserves the right to revise this publication and to make changes in the contents hereof without obligation to notify any person or organization of such revisions or changes.Manual RevisionsTrademarksD-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.Copyright © 2011 D-Link Corporation.All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc.Revision Date Description1.0 June 14, 2011 DCS-2210/2230 Revision A1 with rmware version 1.00Preface
4D-Link DCS-2210/2230 User ManualProduct OverviewProduct Overview DCS-2210 or DCS-2230 Network Camera CAT5 Ethernet cable Power adapter Camera stand CD-ROM with User Manual and software Quick Installation GuideIf any of the above items are missing, please contact your reseller.Package Contents Existing 10/100 Ethernet-based network or 802.11n/g wireless network(Wireless for DCS-2230 ) Computer with Windows 7/Vista/XP for Camera Setup Wizard Internet Explorer, Firefox, Opera, or other web browser for web interface (Internet Explorer recommended for full functionality)If any of the above items are missing, please contact your reseller.System Requirements
5D-Link DCS-2210/2230 User ManualHardware OverviewMicrophoneRecords audio from the surrounding areaWPS LED(DCS-2230 only)WPS status indicator LEDSpeakerAudio outputCamera LensRecords video of the surrounding areaFrontStatus LEDIndicates the camera's current statusICR SensorThe IR-Cut Removable sensor judges lighting conditions and switches from color to infrared accordinglyInfrared LEDUsed to illuminate the camera's eld of view at nightPIRPassive Infrared sensor for motion detectHardware OverviewHardware Overview
6D-Link DCS-2210/2230 User ManualHardware OverviewRearI/O ConnectorI/O connectors for external devicesResetPress and hold this button for 10 seconds to reset the cameraEthernetRJ45 connector for Ethernet (DCS-2210 support PoE which can also be used to power the camera)Power ConnectorConnects to the included DC 5 V power adapterAdjustment RingTighten or loosen the adjustment ring to adjust the camera's positionWPS Button (DCS-2230 only)Press this button, then press the WPS button on your router to set up a wireless connection automaticallyBase HolesCan be used with cable ties to attach camera to a surface
7D-Link DCS-2210/2230 User ManualHardware OverviewMicro SD Card slotLocal storage for storing recorded image and videoSide
8D-Link DCS-2210/2230 User ManualHardware OverviewConguration with WizardInsert the DCS-2210/DCS-2230 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive.Click Installation Wizard to begin the installation.After clicking Setup Wizard, the window on the right will open.Click Next to continue.
9D-Link DCS-2210/2230 User ManualHardware OverviewClick Yes to accept the License Agreement.To start the installation process, click Next.Note: The installation may take several minutes to nish.
10D-Link DCS-2210/2230 User ManualHardware OverviewClick Finish to complete the installation.Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu.Start > D-Link > Setup Wizard SE
11D-Link DCS-2210/2230 User ManualHardware OverviewEnter the Admin ID and password. When logging in for the rst time, the default Admin ID is admin with the password left blank.Click Next, to proceed to the next page.The Setup Wizard will appear and display the MAC address and IP address of your camera(s). If you have a DHCP server on your network, a valid IP Address will be displayed. If your network does not use a DHCP server, the network camera's default static IP address 192.168.0.20 will be displayed.Click the Wizard button to continue.
12D-Link DCS-2210/2230 User ManualHardware OverviewTake a moment to conrm your settings and click Restart.Select DHCP if your camera obtains an IP address automatically when it boots up. Select static IP if the camera will use the same IP address each time it is started.Click Next, to proceed to the next page.
13D-Link DCS-2210/2230 User ManualCongurationWeb-based Conguration UtilityCongurationThis section explains how to congure your new D-Link Network Camera using the Web-based Conguration Utility.Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu.Start > D-Link > Setup Wizard SESelect the camera and click the button labeled "Link" to access the web conguration.The Setup Wizard will automatically open your web browser to the IP address of the camera.Alternatively, you may manually open a browser and enter the IP address of the camera: 192.168.0.20
14D-Link DCS-2210/2230 User ManualCongurationThis section shows your camera’s live video. You can select your video prole and view or operate the camera. For additional information about web conguration, please refer to the user manual included on the CD-ROM or the D-Link website.Enter admin as the default username and leave the password blank. Click OK to continue.
15D-Link DCS-2210/2230 User ManualCongurationD-ViewCam Setup WizardD-ViewCam software is included for the administrator to manage multiple D-Link IP cameras remotely. You may use the software to congure all the advanced settings for your cameras. D-ViewCam is a comprehensive management tool for IP surveillance.Insert the CD-ROM into the CD-ROM drive. Click "Install D-ViewCam Software" from menu, and select "D-ViewCam" to install the VMS software.Follow the Installation Wizard to install D-ViewCam.
16D-Link DCS-2210/2230 User ManualCongurationClick Finish to complete the installation.To start D-ViewCam, select Start > All Programs > D-Link D-ViewCam >Main Console.For more detail operation of using D-ViewCam software, please refer to D-ViewCam Manual.
17D-Link DCS-2210/2230 User ManualCongurationLive VideoThis section shows your camera’s live video. You may select any of the available icons listed below to operate the camera. You may also select your language using the drop-down menu on the left side of the screen.You can zoom in and out on the live video image using your mouse. Right-click to zoom out or left-click to zoom in on the image.Digital Input IndicatorThis indicator will change color when a digital input signal is detected.Motion Trigger IndicatorThis indicator will change color when a trigger event occurs.Note: The video motion feature for your camera must be enabled.Recording IndicatorWhen a recording is in progress, this indicator will change color.Video Prole 1Video Prole 2Video Prole 3Full screen modeTaking a SnapshotRecording a Video ClipSet a Storage FolderListen/Stop ListeningTalk/Stop TalkingStart/Stop Digital OutputControl PadThis control pad can be used to pan, tilt, and zoom within the camera's predened view area, if one has been dened.
18D-Link DCS-2210/2230 User ManualCongurationIf any presets have been dened, selecting a preset from this list will display it.This option displays the status of the SD card. If no SD card has been inserted, this screen will display the message "Card Invalid."This option displays the status of your I/O device if a device has been connected.This camera uses electronic pan/tilt/zoom (ePTZ) to select and view areas of interest in the eld of view. Please see page 32 for information about setting the frame size and view window area.You may select a value between 0 and 64. 0 is the slowest and 64 is the fastest.This window indicates the total eld of view (FOV) of the camera. The red box indicates the visible region of interest (ROI).You may select the interface language using this menu.Go To: (Preset List)SD Status:IO Status:PTZ Control:ePTZ Speed:Global View:Language:Auto Pan Starts the automatic panning function. The ROI will pan from back and forth within the FOVStop Stops the camera ePTZ motionPreset Path Starts the camera's motion along the predened path
19D-Link DCS-2210/2230 User ManualCongurationSetupWizardTo congure your Network Camera, click Internet Connection Setup Wizard. Alternatively, you may click Manual Internet Connection Setup to manually congure your Network Camera and skip to page 22.To quickly congure your Network Camera’s motion detection settings, click Motion Detection Setup Wizard. If you want to enter your settings without running the wizard, click Manual Motion Detection Setup and skip to page 27.Internet Connection Setup WizardThis wizard will guide you through a step-by-step process to congure your new D-Link Camera and connect the camera to the internet. Click Next to continue.Note: Select DHCP if you are unsure of which settings to choose.Click Next to continue.
20D-Link DCS-2210/2230 User ManualCongurationSelect Static IP if your Internet Service Provider has provided you with connection settings, or if you wish to set a static address within your home network. Enter the correct conguration information and click Next to continue. If you are using PPPoE, select Enable PPPoE and enter your user name and password, otherwise click Next to continue.If you have a Dynamic DNS account and would like the camera to update your IP address automatically, Select Enable DDNS and enter your host information. Click Next to continue.Enter a name for your camera and click Next to continue.
21D-Link DCS-2210/2230 User ManualCongurationCongure the correct time to ensure that all events will be triggered as scheduled. Click Next to continue. If you have selected DHCP, you will see a summary of your settings, including the camera's IP address. Please write down all of this information as you will need it in order to access your camera.Click Apply to save your settings.
22D-Link DCS-2210/2230 User ManualCongurationThis wizard will guide you through a step-by-step process to congure your camera's motion detection functions.Click Next to continue.Step 1This step will allow you to enable or disable motion detection, specify the detection sensitivity, and adjust the camera’s ability to detect movement.You may specify whether the camera should capture a snapshot or a video clip when motion is detected.Please see the Motion Detection section on page 27 for information about how to congure motion detection.Step 2This step allows you to enable motion detection based on a customized schedule. Specify the day and hours. You may also choose to always record motion.Motion Detection Setup Wizard
23D-Link DCS-2210/2230 User ManualCongurationStep 3This step allows you to specify how you will receive event notications from your camera. You may choose not to receive notications, or to receive notications via e-mail or FTP.Please enter the relevant information for your e-mail or FTP account.Click Next to continue.Step 4You have completed the Motion Detection Wizard.Please verify your settings and click Apply to save them. Please wait a few moments while the camera saves your settings and restarts.
24D-Link DCS-2210/2230 User ManualCongurationNetwork SetupUse this section to congure the network connections for your camera. All relevant information must be entered accurately. After making any changes, click the Save Settings button to save your changes.LAN Settings:DHCP:Static IP Address: IP Address:Subnet Mask:Default Gateway:Primary DNS:Secondary DNS:This section lets you congure settings for your local area network.Select this connection if you have a DHCP server running on your network and would like your camera to obtain an IP address automatically.You may obtain a static or xed IP address and other network information from your network administrator for your camera. A static IP address may simplify access to your camera in the future.Enter the xed IP address in this eld.This number is used to determine if the destination is in the same subnet. The default value is 255.255.255.0.The gateway used to forward frames to destinations in a different subnet. Invalid gateway settings may cause the failure of transmissions to a different subnet.The primary domain name server translates names to IP addresses.The secondary DNS acts as a backup to the primary DNS.
25D-Link DCS-2210/2230 User ManualCongurationEnable UPnP:Enable UPnP Port Forwarding:Enable PPPoE:User Name / Password:HTTP Port:Access Name for Stream 1~3:HTTPS Port:RTSP Port:Enabling this setting allows your camera to be congured as a UPnP device on your network.Enabling this setting allows the camera to add port forwarding entries into the router automatically on a UPnP capable network.Enable this setting if your network uses PPPoE.Enter the username and password for your PPPoE account. Re-enter your password in the Conrm Password eld. You may obtain this information from your ISP.The default port number is 80.The default name is video#.mjpg, where # is the number of the stream.You may use a PC with a secure browser to connect to the HTTPS port of the camera. The default port number is 443.The port number that you use for RTSP streaming to mobile devices, such as mobile phones or PDAs. The default port number is 554. You may specify the address of a particular stream. For instance, live1.sdp can be accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents the ip address of your camera.
26D-Link DCS-2210/2230 User ManualCongurationMaximum Upload/Download Bandwidth:Specifying the maximum download/upload bandwidth for each socket can be useful when connecting your device to a busy or heavily loaded network. Entering a value of '0' indicates that the camera should not monitor bandwidth. Specifying other values will limit the camera's transfer speed to the specied number of kilobytes per second.
27D-Link DCS-2210/2230 User ManualCongurationWireless Setup(DCS-2230 only)This section allows you to set up and congure the wireless settings on your camera. After making any changes, click the Save Settings button to save your changes.Site Survey:SSID:Wireless Mode:Channel:Authentication:Encryption:Click the Rescan button to scan for available wireless networks. After scanning, you can use the dropdown box to select an available wireless network. The related information (SSID, Wireless Mode, Channel, Authentication, Encryption) will be automatically lled in for you.Enter the SSID of the wireless access point you wish to use.Use the dropdown box to select the mode of the wireless network you wish to connect to. Infrastructure is normally used to connect to an access point or router. Ad-Hoc is usually used to connect directly to another computer.If you are using Ad Hoc mode, select the channel of the wireless network you wish to connect to, or select Auto.Select the authentication you use on your wireless network - Open, Shared, WPA-PSK, or WPA2-PSK.If you use WPA-PSK or WPA2-PSK authentication, you will need to specify whether your wireless network uses TKIP or AES encryption. If you use Open or Shared authentication, WEP encryption should be setting.
28D-Link DCS-2210/2230 User ManualCongurationKey: If you use WEP, WPA-PSK, or WPA2-PSK authentication, enter the Key (also known as password) used for your wireless network.
29D-Link DCS-2210/2230 User ManualCongurationDynamic DNSDDNS (Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it has been modied. A user name and password are required when using the DDNS service. After making any changes, click the Save Settings button to save your changes.Enable DDNS: Server Address:Host Name:User Name:Password:Timeout:Status:Select this checkbox to enable the DDNS function.Select your Dynamic DNS provider from the pull down menu or enter the server address manually.Enter the host name of the DDNS server.Enter the user name or e-mail used to connect to your DDNS account.Enter the password used to connect to your DDNS server account.Enter the DNS Timeout values you wish to use.Indicates the connection status, which is automatically determined by the system.
30D-Link DCS-2210/2230 User ManualCongurationImage SetupIn this section, you may congure the video image settings for your camera. A preview of the image will be shown in Live Video.Enable Privacy Mask:Anti Flicker:Mirror:Flip:Power Line:White Balance:Exposure Mode:Denoise:Brightness:The Privacy Mask setting allows you to specify upto 3 rectangular areas on the camera's image to beblocked/excluded from recordings and snapshots.You may click and drag the mouse cursor over thecamera image to draw a mask area.Right clicking on the camera image brings up thefollowing menu options:Disable All: Disables all mask areasEnable All: Enables all mask areasReset All: Clears all mask areas.If the video ickers, try enabling this setting.This will mirror the image horizontally.This will ip the image vertically. When turning Flip on, you may want to consider turning Mirror on as well.Select the frequency used by your power lines to avoid interference or distortion.Use the dropdown box to change white balance settings to help balance colors for different environments. You can choose from Auto, Outdoor, Indoor, Fluorescent, and Push Hold.Changes the exposure mode. Use the dropdown box to set the camera for Indoor, Outdoor, or Night environments, or to Moving to capture moving objects. The Low_Noise option will focus on creating a high-quality picture without noise. You can also create 3 different custom exposure modes. The Max Gain setting will allow you to control the maximum amount of gain to apply to brighten the picture.This setting controls the amount of noise reduction that will be applied to the picture.Adjust this setting to compensate for backlit subjects.
31D-Link DCS-2210/2230 User ManualCongurationContrast:Saturation:Sharpness: Reset Default:Adjust this setting to alter the color intensity/strength.This setting controls the amount of coloration, from grayscale to fully saturated.Specify a value from 0 to 8 to specify how much sharpening to apply to the image.Click this button to reset the image to factory default settings.
32D-Link DCS-2210/2230 User ManualCongurationAudio and VideoYou may congure up to 3 video proles with different settings for your camera. Hence, you may set up different proles for your computer and mobile display. In addition, you may also congure the two-way audio settings for your camera. After making any changes, click the Save Settings button to save your changes.Number of active proles:Aspect ratio:Mode:Frame size / View window area:Maximum frame rate:You can use the dropdown box to set up to 3 active proles.Set the aspect ratio of the video to 4:3 standard or 16:9 widescreen.Set the video codec to be used to JPEG, MPEG-4, or H.264.Frame size determines the total capture resolution, and View window area determines the Live Video viewing window size. If the Frame size is larger than the Live Video size, you can use the ePTZ controls to look around.16:9 1920x1080, 1280x720, 800x450, 640x360, 480x270, 320x176, 176x144 4:3 1024x768, 800x600, 640x480, 480x 360, 320x240, 176x144Note: If your View window area is the same as your Frame size, you will not be able to use the ePTZ function. A higher frame rate provides smoother motion for videos, and requires more bandwidth. Lower frame rates will result in stuttering motion, and requires less bandwidth.
33D-Link DCS-2210/2230 User ManualCongurationVideo Quality:Constant bit rate:Fixed quality:Audio in off:Audio in gain level:Audio out off:Audio out volume level:This limits the maximum frame rate, which can be combined with the "Fixed quality" option to optimize the bandwidth utilization and video quality. If xed bandwidth utilization is desired regardless of the video quality, choose "Constant bit rate" and select the desired bandwidth.The bps will affect the bit rate of the video recorded by the camera. Higher bit rates result in higher video quality.Select the image quality level for the camera to try to maintain. High quality levels will result in increased bit rates.Ticking this checkbox will mute incoming audio.This setting controls the amount of gain applied to incoming audio to increase its volume.Ticking this checkbox will mute outgoing audio.This setting controls the amount of gain applied to outgoing audio to increase its volume.
34D-Link DCS-2210/2230 User ManualCongurationPresetThis screen allows you to set preset points for the ePTZ function of the camera, which allows you to look around the camera's viewable area by using a zoomed view. Presets allow you to quickly go to and view a specic part of the area your camera is covering, and you can create preset sequences, which will automatically change the camera's view between the different presets according to a dened order and timing you can set.Note: If your View window area is the same as your Frame size, you will not be able to use the ePTZ function. For more details, refer to "Audio and Video" on page 32.Video Prole: ePTZ Speed:Arrow Buttons and Home Button:Input Preset Name:Preset List:This selects which video prole to use. For more information, refer to "Audio and Video" on page 32.Select your Dynamic DNS provider from the pull down menu or enter the server address manually.Use these buttons to move to a specic part of the viewing area, which you can then set as a preset. Click the Home button to return to the center of the viewing area.Enter the name of the preset you want to create, then click the Add button to make a new preset. If an existing preset has been selected from the Preset List, you can change its name by typing in a new name, then clicking the Rename button.Click this dropdown box to see a list of all the presets that have been created. You can select one, then click the GoTo button to change the displayed camera view to the preset. Clicking the Remove button will delete the currently selected preset.
35D-Link DCS-2210/2230 User ManualCongurationPreset Sequence: This section allows you to create a preset sequence, which automatically moves the camera's view between a set of preset views.To add a preset to the sequence, select it from the dropdown box at the bottom of this window, set the Dwell time to determine how long the camera view will stay at that preset, then click the Add button. The preset name will appear in the list, followed by the dwell time to view that preset for.You can rearrange your presets in the sequence by selecting a preset in the sequence, then clicking the arrow buttons to move it higher or lower in the current sequence. Clicking the trash can button will remove the currently selected preset from the sequence. If you want to change the dwell time for a preset, select it from the list, enter a new dwell time, then click the Update button.
36D-Link DCS-2210/2230 User ManualCongurationMotion DetectionEnabling Video Motion will allow your camera to use the motion detection feature. You may draw a nite motion area that will be used for monitoring. After making any changes, click the Save Settings button to save your changes.Enable Video Motion:Sensitivity:Percentage:Draw Motion Area:Erase Motion Area:Select this box to enable the motion detection feature of your camera.Species the measurable difference between two sequential images that would indicate motion. Please enter a value between 0 and 100.Species the amount of motion in the window being monitored that is required to initiate an alert. If this is set to 100%, motion is detected within the whole window will trigger a snapshot.Draw the motion detection area by dragging your mouse in the window (indicated by the red square).To erase a motion detection area, simply click on the red square that you wish to remove.Right clicking on the camera image brings up the following menu options:Select All: Draws a motion detection area over the entire screen.Clear All: Clears any motion detection areas that have been drawn.Restore: Restores the previously specied motion detection areas.
37D-Link DCS-2210/2230 User ManualCongurationTime and DateThis section allows you to automatically or manually congure, update, and maintain the internal system clock for your camera. After making any changes, click the Save Settings button to save your changes.Time Zone:Enable Daylight Saving:Auto Daylight Saving:Set Date and Time Manually:Offset:Synchronize with NTP Server:NTP Server:Set the Date and Time Manually:Copy Your Computer's Time Settings:Select your time zone from the drop-down menu.Select this to enable Daylight Saving Time.Select this option to allow your camera to congure the Daylight Saving settings automatically.Selecting this option allows you to congure the Daylight Saving date and time manually.Sets the amount of time to be added or removed when Daylight Saving is enabled.Enable this feature to obtain time automatically from an NTP server.Network Time Protocol (NTP) synchronizes the DCS-2230 with an Internet time server. Choose the one that is closest to your location.This option allows you to set the time and date manually.This will synchronize the time information from your PC.
38D-Link DCS-2210/2230 User ManualCongurationEvent SetupThe Event Setup page includes 4 different sections.• Event• Server • Media• Recording1. To add a new item - "event, server or media," click Add. A screen will appear and allow you to update the elds accordingly.2. To delete the selected item from the pull-down menu of event, server or media, click Delete. 3. Click on the item name to pop up a window for modifying.Note: You can add up to four events, ve servers, and ve media elds.
39D-Link DCS-2210/2230 User ManualCongurationApplicationIn a typical application, when motion is detected, the DCS-2230 Network Camera sends images to a FTP server or via e-mail as notications. As shown in the illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is triggered, a specied action will be performed. You can congure the Network Camera to send snapshots or videos to your e-mail address or FTP site.ex. Motion detection, Periodically, Digital input, System rebootEvent Conditionex. Snapshot, Video Clipsex. Email, FTPMedia(what to send)Server(where to send)ActionTo start plotting an event, it is suggested to congure server and media columns rst so that the Network Camera will know what action shall be performed when a trigger is activated.
40D-Link DCS-2210/2230 User ManualCongurationAdd ServerServer Name:E-mail:FTP:Network Storage:SD Card:Enter the unique name of your server.Enter the conguration for the target e-mail server account.Enter the conguration for the target FTP server account.Specify a network storage device. Only one network storage device is supported.Use the camera's onboard SD card storage.You can congure up to 5 servers to save snapshots and/or video to. After making any changes, click the Save Settings button to save your changes.
41D-Link DCS-2210/2230 User ManualCongurationAdd MediaMedia Name:Snapshot:Source:Send pre-event image(s) [0~4]:Send post-event image(s) [0~7]:File name prex:Add date and time sufx to le name:Enter an unique name for media type you want to create.Select this option to set the media type to snapshots.Set the video prole to use as the media source. Refer to "Audio and Video" on page 32 for more information on video proles.Set the number of pre-event images to take. Pre-event images are images taken before the main event snapshot is taken.Set the number of post-event images to take. Post-event images are images taken after the main event snapshot is taken. You can set up to 7 post-event images to be taken.The prex name will be added on the le name.Check it to add timing information as le name sufx.There are three types of media, Snapshot, Video Clip, and System Log. After making any changes, click the Save Settings button to save your changes.
42D-Link DCS-2210/2230 User ManualCongurationVideo clip:Source:Pre-event recording:Maximum duration:Maximum le size:File name prex:System log:Select this option to set the media type to video clips.Set the video prole to use as the media source. Refer to "Audio and Video" on page 32 for more information on video proles.This sets how many seconds to record before the main event video clip starts. You can record up to 4 seconds of pre-event video.Set the maximum length of video to record for your video clips.Set the maximum le size to record for your video clips. This is the prex that will be added to the lename of saved video clips.Select this option to set the media type to system logs. This will save the event to the camera system log, but will not record any snapshots or video.
43D-Link DCS-2210/2230 User ManualCongurationAdd EventCreate and schedule up to 3 events with their own settings here. After making any changes, click the Save Settings button to save your changes.Event name:Enable this event:Priority:Delay:Trigger:Video Motion Detection:Periodic:Digital input:System Boot:Network Lost:Passive Infrared:Enter a name for the event.Select this box to activate this event.Set the priority for this event. The event with higher priority will be executed rst.Select the delay time before checking the next event. It is being used for both events of motion detection and digital input trigger.Specify the input type that triggers the event.Motion is detected during live video monitoring. Select the windows that need to be monitored.The event is triggered in specied intervals. The trigger interval unit is in minutes.The external trigger input to the camera.Triggers an event when the system boots up. Triggers an event when if the network connection is lost.Triggers an event when the PIR sensor is activated by moving infrared objects even in dark environment.
44D-Link DCS-2210/2230 User ManualCongurationTime:Trigger D/O:Server:Select Always or enter the time interval.Select to trigger the digital output for a specic number of seconds when an event occurs.Specify the location where the event information should be saved to.
45D-Link DCS-2210/2230 User ManualCongurationAdd RecordingRecording entry name:Enable this recording:Priority:Source:Recording schedule:Recording settings:Destination:Total cycling recording size:The unique name of the entry.Select this to enable the recording function.Set the priority for this entry. The entry with a higher priority value will be executed rst.The source of the stream.Scheduling the recording entry.Conguring the setting for the recording.Select the folder where the recording le will be stored.Please input a HDD volume between 1MB and 200GB for recording space. The recording data will replace the oldest record when the total recording size exceeds this value. For example, if each recording le is 6MB, and the total cyclic recording size is 600MB, then the camera will record 100 les in the specied location (folder) and then will delete the oldest le and create new le for cyclic recording.Please note that if the free HDD space is not enough, the recording will stop. Before you set up this option please make sure your HDD has enough space, and it is better to not save other les in the same folder as recording les. Here you can congure and schedule the recording settings. After making any changes, click the Save Settings button to save your changes.
46D-Link DCS-2210/2230 User ManualCongurationSize of each le for recording:File Name Prex:File size for each recording le. You may input the value in the range of 200-5000.The prex name will be added on the le name of the recording le(s).
47D-Link DCS-2210/2230 User ManualCongurationSD CardFormat SD Card:View Recorded Picture:Playback Recorded Video:Refresh:Click this icon to automatically format the SD card and create "picture" & "video" folders.If the picture les are stored on the SD card, click on the picture folder and choose the picture le you would like to view.If video les are stored on the SD card, click on the video folder and choose the video le you would like to view.Reloads the le and folder information from the SD card.Here you may browse and manage the recorded les which are stored on the SD card.
48D-Link DCS-2210/2230 User ManualCongurationAdvancedThis screen allows you to control the behavior of digital input and digital output devices. The I/O connector provides the physical interface for digital output (DO) and digital input (DI) that is used for connecting a variety of external alarm devices such as IR-Sensors and alarm relays. The digital input is used for connecting external alarm devices and once triggered images will be taken and e-mailed. After making any changes, click the Save Settings button to save your changes.Digital Input/OutputSelect D/I or D/O Mode:LED:The camera will send a signal when an event is triggered, depending upon the type of device connected to the DI circuit.N.C. stands for Normally Closed. This means that the normal state of the circuit is closed. Therefore events are triggered when the device status changes to "Open."N.O. stands for Normally Open. This means that the normal state of the circuit is open. Therefore events are triggered when the device status changes to "Closed."You may specify whether or not to illuminate the LED on the side of the camera.
49D-Link DCS-2210/2230 User ManualCongurationICR and IRHere you can congure the ICR and IR settings. An IR(Infrared) Cut-Removable(ICR) lter can be disengaged for increased sensitivity in low light environments.Automatic:Day Mode:Night Mode:Schedule Mode:IR Light Control:Off:On:Sync:Schedule:The Day/Night mode is set automatically. Generally, the camera uses Day mode and switches to Night mode when needed.Day mode enables the IR Cut Filter.Night mode disables the IR Cut Filter.Set up the Day/Night mode using a schedule. The camera will enter Day mode at the starting time and return to Night mode at the ending time.The camera can enable or disable the IR (infrared) light according to your preferences. This setting provides additional controls depending on your specic application.The IR light will always be off.The IR light will always be on.The IR light will turn on when the ICR sensor is on.The IR light will turn on or off according to the schedule that you specify below.
50D-Link DCS-2210/2230 User ManualCongurationHTTPSThis page allows you to install and activate an HTTPS certicate for secure access to your camera. After making any changes, click the Save Settings button to save your changes.Enable HTTPS Secure Connection:Create Certicate Method:Status:Note:Enable the HTTPS service.Choose the way the certicate should be created. Three options are available:Create a self-signed certicate automaticallyCreate a self-signed certicate manuallyCreate a certicate request and installDisplays the status of the certicate.The certicate cannot be removed while the HTTPS is still enabled. To remove the certicate, you must rst uncheck Enable HTTPS secure connection.
51D-Link DCS-2210/2230 User ManualCongurationAccess ListHere you can set access permissions for users to view your DDCS-2210/2230. Allow list:Start IP address:End IP address:Delete allow list:Deny list:Delete deny list:The list of IP addresses that have the access right to the camera.The starting IP Address of the devices (such as a computer) that have permission to access the video of the camera. Click Add to save the changes made.Note: A total of seven lists can be congured for both columns.The ending IP Address of the devices (such as a computer) that have permission to access the video of the camera.Remove the customized setting from the Allow List.The list of IP addresses that have no access rights to the camera.Remove the customized setting from the Delete List.For example:When the range of the Allowed List is set from 1.1.1.0 to 192.255.255.255 and the range of the Denied List is set from 1.1.1.0 to 170.255.255.255. Only users with IPs located between 171.0.0.0 and 192.255.255.255 can access the Network Camera.Alowed ListDenied List
52D-Link DCS-2210/2230 User ManualCongurationMaintenanceYou may modify the name and administrator’s password of your camera, as well as add and manage the user accounts for accessing the camera. You may also use this section to create a unique name and congure the OSD settings for your camera.Admin Password Setting:Add User Account:User Name:Password:User List:Camera Name:Enable OSD:Label:Show Time:Set a new password for the administrator’s account.Add new user account.The user name for the new account.The password for the new account.All the existing user accounts will be displayed here. You may delete accounts includes in the list, but please reserve at least one as guest.Create a unique name for your camera that will be added to the le name prex when creating a snapshot or a video clip. Select this option to enable the On-Screen Display feature for your camera.Enter a label for the camera.Select this option to enable the time-stamp display on the video screen.Device Management
53D-Link DCS-2210/2230 User ManualCongurationBackup and RestoreIn this section, you may backup, restore and reset the camera conguration, or reboot the camera.Save To Local Hard Drive:Local From Local Hard Drive:Restore to Factory Default:Reboot Device:You may save and document your current settings into your computer.Locate a pre-saved conguration by clicking Browse and then restore the pre-dened settings to your camera by clicking Load Conguration.You may reset your camera and restore the factory settings by clicking Restore Factory Defaults.This will restart your camera.
54D-Link DCS-2210/2230 User ManualCongurationFirmware UpgradeThe camera's current rmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available rmware version.To upgrade the rmware on your DCS-2210/2230, please download and save the latest rmware version from the D-Link Support Page to your local hard drive. Locate the le on your local hard drive by clicking the Browse button. Select the le and click the Upload button to start upgrading the rmware.Current Firmware Version:Current Product Name:File Path:Upload:Displays the detected rmware version.Displays the camera model name.Locate the le (upgraded rmware) on your hard drive by clicking Browse.Uploads the new rmware to your camera.
55D-Link DCS-2210/2230 User ManualCongurationStatusThis page displays detailed information about your device and network connection.Device Info
56D-Link DCS-2210/2230 User ManualCongurationThis page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information.Logs
57D-Link DCS-2210/2230 User ManualCongurationThis page provides helpful information regarding camera operation.Help
58D-Link DCS-2210/2230 User ManualAppendixDI/DO Input SpecicationsAppendixPin 1 Pin 4Pin 3Pin 2PIN FUNCTION NOTE1 Digital Out (DO) Uses an open-drain NFET transistor with the source connected to GND in camera. If used with an external relay, a diode must be connected in parallel with the load for protection against voltage transients. Max loading is 100 mA.2 Digital In (DI) A switch from DI to DC 5 V, activated by setting NO. or NC.3 DC5V OUTPUT DC 5 V Output / Max. 100 mA4 GND GNDInternal 5V Power External 3~12V PowerDODI5VDNDN.C / N.O100 mAALARMReed switch DiodeDC Power 5VRDODI5VDNDN.C / N.OALARMReed switch DiodeDC Power 5VRDC Power 3V~12V100 mA
59D-Link DCS-2210/2230 User ManualAppendixTechnical SpecicationsCamera Camera Hardware Profile 1/2.7” 2 Megapixel progressive CMOS sensor IR illumination distance: 5 m Minimum illumination 0 lux with IR illumination Built-in Infrared-Cut Removable (ICR) lter module Built-in PIR sensor Built-in microphone and speaker 10x digital zoom Fixed length 4.37 mm Aperture F2.0 Angle of view: (H) 67.4° (V) 40.8° (D) 75°Image Features Configurable image size, quality, frame rate, and bit rate Time stamp and text overlays Configurable motion detection windows 3 configurable privacy mask zones Configurable shutter speed, brightness, saturation, contrast, and sharpnessVideo Compression Simultaneous H.264/MPEG-4/MJPEG format compression JPEG for still image H.264/MPEG-4 multicast streamingVideo Resolution 16:9 - 1920 x 1080 (up to 15 fps), 1280 x 720, 800 x 450, 640 x 360, 480 x 270, 320 x 176, 176 x 144 up to 30 fps4:3 - 1440 x 1080 (up to 15 fps), 1280 x 960, 1024 x 768, 800 x 600, 640 x 480, 320 x 240, 176 x 144 up to 30 fpsAudio Support G.726External Device Interface 1 DI / 1 DO Micro SD card slotNetwork Network Protocols IPv4, TCP/IP, UDP, ICMP, DHCP Client, NTP Client (D-Link), DNS Client, DDNS Client (D-Link), SMTP Client, FTP Client, HTTP / HTTPS, Samba Client, PPPoE, UPnP Port Forwarding, RTP / RTSP/ RTCP, IP filtering, 3GPP, IGMP, ONVIF CompliantSecurity Administrator and user group protection Password authentication HTTP and RTSP digest encryption
60D-Link DCS-2210/2230 User ManualAppendixSystem ManagementSystem Requirements for Web Interface Operating System: Microsoft Windows 7/Vista/XP/2000 Browser: Internet Explorer, Firefox, Netscape, OperaEvent Management Motion detection Event notification and upload snapshots/video clips via HTTP, SMTP, or FTP Supports multiple HTTP, SMTP, and FTP servers Multiple event notifications Multiple recording methods for easy backupRemote Management Configuration accessible via web browser Take snapshots/video clips and save to local hard drive or NAS via web browserMobile Support Windows 7/Vista/XP system, Pocket PC, or mobile phone with 3GPP playback supportD-ViewCam™ System Requirements Operating System: Microsoft Windows 7/Vista/XP Web Browser: Internet Explorer 6 or higher Protocol: Standard TCP/IPD-ViewCam™ Software Functions Remote management/control of up to 32 cameras Viewing of up to 32 cameras on one screen Supports all management functions provided in web interface Scheduled motion triggered, or manual recording optionsGeneral Power Input 5 V DC 1.2 A, 50/60 Hz, PoE ( DCS-2210 only )Max. Power ConsumptionDCS-2210: 3.5 wattsDCS-2230: 4 wattsOperating Temperature 0 to 40 ˚C (32 to 104 ˚F)Storage Temperature -20 to 70 °C (-4 to 158 °F)Humidity 20% to 80% non-condensingWeight DCS-2210: 80 gDCS-2230: 75 gCertifications CE, CE LVD, FCC(Class B), C-TickTechnical Specications* This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesired operation.
61D-Link DCS-2210/2230 User ManualAppendixDimensions5895128.682.38238.797DCS-2210/2230
FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance."
Canada Notices Industry Canada regulatory information Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The user is cautioned that this device should be used only as specified within this manual to meet RF exposure requirements. Use of this device in a manner inconsistent with this manual could lead to excessive RF exposure conditions. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance." Cet équipement doit être installé et utilisé conformément aux instructions fournies et de l'antenne (s) utilisé pour cet émetteur doit être installé pour fournir une distance de séparation d'au moins 20 cm de toute personne et ne doit pas être co-localisés ou fonctionnant en conjonction avec une autre antenne ou transmetteur. Les utilisateurs finaux et installateurs doivent être fournir des instructions d'installation de l'antenne et des conditions de fonctionnement du transmetteur de la conformité sur l'exposition aux RF

Navigation menu