D Link CS2230LA1 Full HD Wireless Day/Night Network Camera User Manual

D Link Corporation Full HD Wireless Day/Night Network Camera

UserManual.wiki >

CS2230LA1 User Manual

User Manual

User ManualFull HD Wireless Day/Night Network CameraVersion 1.00 | 11/10/2014DCS-2230L

3D-Link DCS-2230L User ManualTable of ContentsProduct Overview .............................................................. 5Package Contents ................................................................. 5System Requirements ......................................................... 6Introduction ............................................................................ 7Features .................................................................................... 8Hardware Overview ............................................................. 9Front View ............................................................................ 9Rear View ...........................................................................10Side View ............................................................................11Installation .......................................................................12Wireless Installation Considerations ............................12Zero Conguration Setup ................................................13Camera Setup Wizard ........................................................17Windows Users ....................................................................17Mac Users...............................................................................18Manual Hardware Installation ........................................20WPS - Push Button Setup .................................................21Mount the Camera .............................................................22mydlink ...........................................................................................23Conguration ...................................................................24Using the Conguration Interface ................................24Live Video ..............................................................................25Setup .......................................................................................27Setup Wizard ....................................................................27Network Setup .................................................................33Wireless Setup .................................................................. 36Dynamic DNS ...................................................................37Image Setup .....................................................................38Audio and Video ..............................................................40Preset ................................................................................... 42Motion Detection ...........................................................44Time and Date .................................................................. 45Event Setup .......................................................................46SD Card ...............................................................................55Advanced .........................................................................56Digital Input/Output ......................................................56ICR and IR ...........................................................................57HTTPS ..................................................................................58Access List .......................................................................... 59SNMP ...................................................................................60Maintenance ....................................................................61Admin..................................................................................61System ................................................................................62Firmware Upgrade ..........................................................63Status ................................................................................64Device Info ........................................................................64Logs .....................................................................................65Help......................................................................................66

4D-Link DCS-2230L User ManualDI/DO Specications .......................................................67Technical Specications ..................................................68Safety Statements ...........................................................71

5D-Link DCS-2230L User ManualSection 1: Product OverviewProduct OverviewPackage ContentsIf any of the above items are missing, please contact your reseller.Note: Using a power supply with a dierent voltage than the one included with your product will cause damage and void the warranty for this product.DCS-2230L Full HD Wireless Day/Night Network CameraCAT5 Ethernet cablePower adapterCD-ROM with User Manual and softwareQuick Installation Guide

6D-Link DCS-2230L User ManualSection 1: Product OverviewSystem RequirementsHardware Requirements• A microSD memory card (optional) is required for recording to onboard storage. SDHC Class 6 or above is recommended. Network Requirements• An Ethernet-based cable or DSL modem• IEEE 802.11n/g wireless clients• 10/100 Ethernet• Broadband Internet connectionWeb-based Conguration Utility RequirementsComputer with the following:• Windows® XP/Vista/7/8, Linux-based, or Mac with OS X 10.6 or higher• An installed Ethernet adapterBrowser Requirements:• Internet Explorer 7.0 or higher• Firefox 12 or higher• Safari 6.0 or higher (with Java installed and enabled) • Chrome 20 or higherWindows® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version.

7D-Link DCS-2230L User ManualSection 1: Product OverviewIntroductionCongratulations on your purchase of the DCS-2230L Full HD Wireless Day/Night Network Camera. The DCS-2230L is a versatile surveillance solution for your small oce or home. The full HD 1920 x 1080 resolution 2 megapixel progressive scan CMOS sensor lets you capture details like never before – especially important for face recognition. A built-in IR-cut lter and IR LED makes sure you don't miss an event no matter how bright or dark your surroundings are. To make things convenient, support for Wireless N means you can easily connect it to your network when setting up your camera on location.Unlike a standard webcam, the DCS-2230L is a complete system with a built-in CPU and web server that transmits high quality video images for security and surveillance. The DCS-2230L can be accessed remotely, and controlled from any PC over your local network or through the Internet via a web browser. It also comes with the D-Link D-ViewCam™ software bundle that allows you to manage multiple network cameras using remote monitoring, scheduling, recording, motion detection, and notications for a complete and cost-eective home security solution.

8D-Link DCS-2230L User ManualSection 1: Product OverviewFull HD ResolutionThe DCS-2230L Full HD Wireless Day/Night Network Camera is equipped with a 2 megapixel progressive scan CMOS sensor that provides full HD 1920x1080 resolution, the video stream captures a larger scene and provides more details than an analog CCTV camera – so you can identify criminals more easily in critical surveillance applications.Wireless N for ConvenienceThe DCS-2230L supports Wireless N, which lets you connect your camera to your network without using an Ethernet cable. This feature lets you set up your camera anywhere without worrying about running network cables to your location.IR LED for Day and Night FunctionalityThe built-in IR-cut lter and IR LED enable night time viewing or recording in dark environments at ranges up to 16 feet (5 meters).DI/DO for Connecting External DevicesRounding out the exibility of the DCS-2230L, you can connect an alarm or trigger to its DI/DO port for integration into a surveillance solution.Remote Monitoring UtilityThe D-ViewCam™ application adds enhanced features and functionality for the DCS-2230L and allows administrators to congure and access the DCS-2230L from a remote site via Intranet or Internet. Other features include image monitoring, recording images to a hard drive, viewing up to 32 cameras on one screen, and taking snapshots.Built-in Mic and SpeakerCovering all the visual components, the DCS-2230L also has a built-in microphone and speaker, so you can transmit two-way audio easily.mydlink SupportEmbrace the power of the cloud by adding your DCS-2230L to the list of devices manageable via the free mydlink web portal.Web CongurationUsing a standard web browser, administrators can congure and manage the DCS-2230L directly from its own web page via Intranet or Internet. This means you can access your DCS-2230L anytime, anywhere in the world.Broad Range of ApplicationsWith today’s high-speed Internet services, the DCS-2230L can provide the ideal solution for delivering live video images over the Intranet and Internet for remote monitoring. The DCS-2230L allows remote access using a web browser for live image viewing, and allows the administrator to manage and control the DCS-2230L anytime, anywhere in the world.Features

9D-Link DCS-2230L User ManualSection 1: Product OverviewFront ViewHardware Overview1 Status LED Indicates the camera's current status2 WPS Status LED Indicates the WPS connection status of the camera3 Infrared LED Used to illuminate the camera's eld of view at night4 PIR Sensor Passive Infrared sensor for motion detection5 Camera Lens Records video of the surrounding area6Light Sensor The IR-Cut Removable sensor monitors lighting conditions and switches between color and infrared accordingly7 Microphone Records audio from the surrounding area1456732

10D-Link DCS-2230L User ManualSection 1: Product OverviewRear View1 Ethernet Port RJ45 connector for Ethernet2 WPS Button Press this button, then press the WPS button for 5 seconds on your router to set up a wireless connection automatically3 Reset Button Press and hold this button for 10 seconds to reset the camera4 Power Connector Connects to the included DC 5 V power adapter5 DI/DO Connector I/O connectors for external devices6 Adjustment Ring Tighten or loosen the adjustment ring to adjust the camera's position156243

11D-Link DCS-2230L User ManualSection 1: Product OverviewSide View1 microSD Card Slot Insert a microSD card for Local storage for storing recorded image and video1

12D-Link DCS-2230L User ManualSection 2: InstallationThis D-Link device can connect to your wireless network from anywhere within the operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Minimize the number of walls and ceilings between your adapter and other network devices (such as your DCS-2230L) - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters).2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle, it looks over 42 feet (14 meters) thick. Position your devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building materials make a dierence. A solid metal door or aluminum studs may weaken the wireless signal. Try to position your access points, wireless routers, and other networking devices where the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.4. Keep your product at least 3-6 feet or 1-2 meters away from electrical devices or appliances that generate RF noise.5. If you are using 2.4 GHz cordless phones or other radio frequency sources (such as microwave ovens), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.InstallationWireless Installation Considerations

13D-Link DCS-2230L User ManualSection 2: InstallationZero Conguration SetupIf you have a D-Link Cloud Router, you can take advantage of Zero Conguration Setup. Zero Conguration automatically congures your camera's settings for you, and adds it to your mydlink account automatically. This type of setup allows you to set up your camera by simply plugging it in and connecting it to your router.Connect your camera to your mydlink-enabled Cloud Router and Zero Conguration will automatically congure your DCS-2230L and automatically add the camera to your mydlink account. You can now remotely access your camera from the mydlink.com website to manage and monitor your DCS-2230L.Connect the Ethernet CableIf using an Ethernet connection: Connect the included Ethernet cable to the Ethernet port located on the back of the DCS-2230L and connect it to your router.Attach the External Power SupplyAttach the external power supply to the DC Power receptor located on the rear panel of the DCS-2230L and connect it to your wall outlet or power strip.

14D-Link DCS-2230L User ManualSection 2: InstallationTo create a WPS connection:Step 1Press and hold the WPS button for approximately 5-6 seconds. The blue WPS status LED above the button will blink.Step 2Within 60 seconds press the WPS button on your router. On some routers, you may need to log in to the web interface and click on an on-screen button to activate the WPS feature. If you are not sure where the WPS button is on your router, please refer to your router’s User Manual.The DCS-2230L will automatically create a wireless connection to your router. While connecting, the status LED will ash. When the connection process is complete, the status LED will turn solid.Note: If your router does not support WPS, you can still use the wired connection method on the previous page. After Zero Conguration setup is complete, your router's wireless settings will be automatically transferred to the camera.Optional: WPS Wireless ConnectionAlternatively, if your router supports WPS, you can use the WPS button on the camera to easily create a secure wireless connection to your network.

15D-Link DCS-2230L User ManualSection 2: InstallationA summary and conrmation notication will appear with the automatically congured details. Make a note of the details and click OK to add the camera to your account.Check Your mydlink AccountFrom any computer, open a web browser, go to http://www.mydlink.com and loginto your account. Once mydlink detects your camera, a New Device Found! notice will appear in the bottom-left corner. Click on the device name to continue.DCS-2230LDCS-2230L

16D-Link DCS-2230L User ManualSection 2: InstallationZero Conguration is now complete and your camera has been added to your mydlink account. You can now view your camera on the mydlink Live View tab.Your camera is now set up, and you can skip to mydlink on page 23 to learn more about the mydlink features of this camera, or to Conguration on page 24 for advanced conguration of your camera.DCS-2230L

17D-Link DCS-2230L User ManualSection 2: InstallationInsert the Installation CD-ROM into your computer’s optical drive to start the autorun program. Simply click Set up your Cloud Camera to go through the Setup Wizard, which will guide you step-by-step through the installation process from connecting your hardware to conguring your camera and registering it with your mydlink account.Camera Setup WizardWindows UsersNote: If the autorun program does not open, go to My Computer, browse to your CD drive, and double-clickon the autorun.exe le.

18D-Link DCS-2230L User ManualSection 2: InstallationInsert the Installation CD-ROM into your computer’s CD drive. On the desktop, open your CD drive and double-click on the SetupWizard le.Within 20-30 seconds, the Setup Wizard will open, which will guide you step-by-step through the installation process from connecting your hardware to conguring your camera and registering it with your mydlink account.Mac Users

19D-Link DCS-2230L User ManualSection 2: InstallationConrm your camera login details and IP address details and click Done.Your DCS-2230L camera is now set up. Log on to your mydlink account and explore the exciting benets available to you.Your camera is now set up, and you can skip to mydlink on page 23 to learn more about the mydlink features of this camera, or go to Conguration on page 24 for advanced conguration of your camera.DCS-2230L

20D-Link DCS-2230L User ManualSection 2: InstallationManual Hardware InstallationIf you wish to set up your camera without using the Camera Setup Wizard, please follow these steps. Note: In order to use the mydlink features of this product, you will need to go through the Camera Setup Wizard.Connect the Ethernet CableIf using an Ethernet connection: Connect the included Ethernet cable to the Ethernet port located on the back of the DCS-2230L and connect it to your router.Attach the External Power SupplyAttach the external power supply to the DC Power receptor located on the rear panel of the DCS-2230L and connect it to your wall outlet or power strip.

21D-Link DCS-2230L User ManualSection 2: InstallationTo create a WPS connection:Step 1Press and hold the WPS button for approximately 5-6 seconds. The blue WPS status LED above the button will blink.Step 2Within 60 seconds press the WPS button on your router. On some routers, you may need to log in to the web interface and click on an on-screen button to activate the WPS feature. If you are not sure where the WPS button is on your router, please refer to your router’s User Manual.The DCS-2230L will automatically create a wireless connection to your router. While connecting, the status LED will ash. When the connection process is complete, the status LED will turn solid.WPS - Push Button SetupIf your router supports WPS, you can use the WPS button on the camera to easily create a secure wireless connection to your network.WPS Button

22D-Link DCS-2230L User ManualSection 2: Installation1. Place the mounting base where you want to position the camera and use a pencil to mark the holes.4. Place the base cover on the base and screw the camera stem clockwise into the mounting base. 2. Depending on the material of the wall or ceiling, use proper tools to drill two holes or screws where you marked. If the wall is made out of concrete, drill the holes rst, insert the plastic anchors and then the screws.3. Place the mounting base over the screw that is mounted on the wall. Make sure to t the screw-heads over the big holes and slide it downward to lock rmly. Lightly pull the base forward to make sure that it is locked.Please refer to the steps below to assist you with mounting the camera.The space between the camera and the screwheads should be 3mm.We suggest that you congure the camera before mounting.12345. Adjust the angle of the camera as desired, then tighten the collar on the camera stem to lock it in place.5Mount the Camera

23D-Link DCS-2230L User ManualSection 3: mydlinkmydlinkAfter registering your DCS-2230L camera with a mydlink account in the Camera Installation Wizard. You will be able to remotely access your camera from the www.mydlink.com website. After signing in to your mydlink account, you will see a screen similar to the following:For more details on using your camera with mydlink, go to the Support section of the mydlink website and check the User Manual section for your product to nd the latest instruction guide for your camera's mydlink features.

24D-Link DCS-2230L User ManualSection 4: CongurationCongurationUsing the Conguration InterfaceAfter completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in web conguration utility is designed to allow you to easily access and congure your DCS-2230L. At the end of the wizard, enter the IP address of your camera into a web browser, such as Mozilla Firefox. To log in, use the username admin and the password you created in the Installation Wizard. If you did not create a password, the default password is blank. After entering your password, click OK.DCS-2230L

25D-Link DCS-2230L User ManualSection 4: CongurationLive VideoThis section shows your camera’s live video. You may select any of the available icons listed below to operate the camera. You may also select your language using the drop-down menu on the left side of the screen.You can zoom in and out on the live video image using your mouse. Right-click to zoom out or left-click to zoom in on the image.Digital Input IndicatorThis indicator will change color when a digital input signal is detected.Motion Trigger IndicatorThis indicator will change color when a trigger event occurs.Note: The video motion feature for your camera must be enabled.Recording IndicatorWhen a recording is in progress, this indicator will change color.Control PadThis control pad can be used to electronically pan, tilt, and zoom (ePTZ) within the camera's predened view area, if one has been dened.Auto Pan Starts the automatic panning function. The ROI will pan from back and forth within the FOV.Stop Stops automatic panning.Preset Path Starts the camera's motion along the predened path.You may select a value between 0 and 64. 0 is the slowest and 64 is the fastest.ePTZ Speed:This option displays the status of the SD card. If no SD card has been inserted, this screen will display the message "Card Invalid."This option displays the status of your I/O device if a device has been connected.SD Status:IO Status:DCS-2230L

26D-Link DCS-2230L User ManualSection 4: CongurationIf any presets have been dened, selecting a preset from this list will display it.Go To: (Preset List)Video Prole 1Video Prole 2Video Prole 3Full screen modeTaking a SnapshotRecord a Video ClipSet a Storage FolderListen/Stop Audio In (from microphone)Start/Stop Audio Out (to speaker)Start/Stop Digital OutputThis window indicates the total eld of view (FOV) of the camera. The red box indicates the visible region of interest (ROI).You may select the interface language using this menu.Global View: Language:

27D-Link DCS-2230L User ManualSection 4: CongurationSetupSetup WizardTo congure your DCS-2230L, click Internet Connection Setup Wizard. Alternatively, you may click Manual Internet Connection Setup to manually congure your DCS-2230L and skip to Network Setup on page 33.To quickly congure your DCS-2230L’s motion detection settings, click Motion Detection Setup Wizard. If you want to enter your settings without running the wizard, click Manual Motion Detection Setup and skip to Motion Detection on page 44.

28D-Link DCS-2230L User ManualSection 4: CongurationInternet Connection Setup WizardThis wizard will guide you through a step-by-step process to congure your new D-Link Camera and connect the camera to the Internet. Click Next to continue.Note: Select DHCP if you are unsure of which settings to choose.Click Next to continue.

29D-Link DCS-2230L User ManualSection 4: CongurationSelect Static IP if your Internet Service Provider has provided you with connection settings, or if you wish to set a static address within your home network. Enter the correct conguration information and click Next to continue. If you are using PPPoE, select Enable PPPoE and enter your User Name and Password, otherwise click Next to continue.If you have a Dynamic DNS account and would like the camera to update your IP address automatically, Select Enable DDNS and enter your host information. Click Next to continue.Enter a name for your camera and click Next to continue.

30D-Link DCS-2230L User ManualSection 4: CongurationCongure the correct time to ensure that all events will be triggered as scheduled. Click Next to continue. If you have selected DHCP, you will see a summary of your settings, including the camera's IP address. Please write down all of this information as you will need it in order to access your camera.Click Apply to save your settings.

31D-Link DCS-2230L User ManualSection 4: CongurationThis wizard will guide you through a step-by-step process to congure your camera's motion detection functions.Click Next to continue.Step 1This step will allow you to enable or disable motion detection, specify the detection sensitivity, and adjust the camera’s ability to detect movement.You may specify whether the camera should capture a snapshot or a video clip when motion is detected.Please see the Motion Detection section on Motion Detection on page 44 for information about how to congure motion detection.Step 2This step allows you to enable motion detection based on a customized schedule. Specify the day and hours. You may also choose to always record whenever motion is detected.Motion Detection Setup Wizard

32D-Link DCS-2230L User ManualSection 4: CongurationStep 3This step allows you to specify how you will receive event notications from your camera. You may choose not to receive notications, or to receive notications via e-mail or FTP.Please enter the relevant information for your e-mail or FTP account.Click Next to continue.Step 4You have completed the Motion Detection Wizard.Please verify your settings and click Apply to save them. Please wait a few moments while the camera saves your settings and restarts.

33D-Link DCS-2230L User ManualSection 4: CongurationNetwork SetupUse this section to congure the network connections for your camera. All relevant information must be entered accurately. After making any changes, click the Save Settings button to save your changes.LAN Settings:DHCP:Static IP Address:IP Address:Subnet Mask:Default Gateway:Primary DNS:Secondary DNS:This section lets you congure settings for your local area network.Select this connection if you have a DHCP server running on your network and would like your camera to obtain an IP address automatically.If you choose DHCP, you do not need to ll out the IP address settings.You may obtain a static or xed IP address and other network information from your network administrator for your camera. A static IP address may simplify access to your camera in the future.Enter the xed IP address in this eld.This number is used to determine if the destination is in the same subnet. The default value is 255.255.255.0.The gateway used to forward frames to destinations in a dierent subnet. Invalid gateway settings may cause the failure of transmissions to a dierent subnet.The primary domain name server translates names to IP addresses.The secondary DNS acts as a backup to the primary DNS.

34D-Link DCS-2230L User ManualSection 4: CongurationEnable UPnP Presentation:Enable UPnP Port Forwarding:Enable PPPoE:User Name / Password:HTTP Port:Access Name for Stream 1~3:HTTPS Port:RTSP Port:Enabling this setting allows your camera to be congured as a UPnP device on your network.Enabling this setting allows the camera to add port forwarding entries into the router automatically on a UPnP capable network.Enable this setting if your network uses PPPoE.Enter the username and password for your PPPoE account. Re-enter your password in the Conrm Password eld. You may obtain this information from your ISP.The default port number is 80.The default name is video#.mjpg, where # is the number of the stream.You may use a PC with a secure browser to connect to the HTTPS port of the camera. The default port number is 443.The port number that you use for RTSP streaming to mobile devices, such as mobile phones or PDAs. The default port number is 554. You may specify the address of a particular stream. For instance, live1.sdp can be accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents the IP address of your camera.

35D-Link DCS-2230L User ManualSection 4: CongurationEnable CoS:Enable QoS:Enable IPV6:Enable Multicast for stream:Enable Bonjour:Enabling the Class of Service setting implements a best-eort policy without making any bandwidth reservations.Enabling QoS allows you to specify a trac priority policy to ensure a consistent Quality of Service during busy periods. If the DCS-2230L is connected to a router that itself implements QoS, the router's settings will override the QoS settings of the camera.Enable the IPv6 setting to use the IPv6 protocol. Enabling the option allows you to manually set up the address, specify an optional IP address, specify an optional router and an optional primary DNS.The DCS-2230L allows you to multicast each of the available streams via group address and specify the TTL value for each stream. Enter the port and TTL settings you wish to use if you do not want to use the defaults.Enable Bonjour to broadcast to network devices (such as iPhones) using this protocol. You can enter a custom Bonjour Name for the router in the text box for identication.

36D-Link DCS-2230L User ManualSection 4: CongurationWireless SetupThis section allows you to set up and congure the wireless settings on your camera. After making any changes, click the Save Settings button to save your changes.Site Survey:SSID:Wireless Mode:Channel:Authentication:Encryption:Key:Click the Rescan button to scan for available wireless networks. After scanning, you can use the drop-down box to select an available wireless network. The related information (SSID, Wireless Mode, Channel, Authentication, Encryption) will be automatically lled in for you.Enter the SSID of the wireless access point you wish to use.Use the drop-down box to select the mode of the wireless network you wish to connect to. Infrastructure is normally used to connect to an access point or router. Ad-Hoc is usually used to connect directly to another computer.If you are using Ad Hoc mode, select the channel of the wireless network you wish to connect to, or select Auto.Select the authentication you use on your wireless network - Open, Shared, WPA-PSK, or WPA2-PSK.If you use WPA-PSK or WPA2-PSK authentication, you will need to specify whether your wireless network uses TKIP or AES encryption. If you use Open or Shared authentication, WEP encryption should be the setting.If you use WEP, WPA-PSK, or WPA2-PSK authentication, enter the Key (also known as password) used for your wireless network.

37D-Link DCS-2230L User ManualSection 4: CongurationDynamic DNSDDNS (Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it has been modied. A user name and password are required when using the DDNS service. After making any changes, click the Save Settings button to save your changes.Enable DDNS: Server Address:Host Name:User Name:Password:Timeout:Status:Select this checkbox to enable the DDNS function.Select your Dynamic DNS provider from the pull down menu or enter the server address manually.Enter the host name of the DDNS server.Enter the user name or e-mail used to connect to your DDNS account.Enter the password used to connect to your DDNS server account.Enter the DNS timeout values you wish to use.Indicates the connection status, which is automatically determined by the system.

38D-Link DCS-2230L User ManualSection 4: CongurationImage SetupIn this section, you may congure the video image settings for your camera. A preview of the image will be shown in Live Video.Enable Privacy Mask:Anti Flicker:Mirror:Flip:Power Line:White Balance:The Privacy Mask setting allows you to specify up to 3 rectangular areas on the camera's image to be blocked/excluded from recordings and snapshots.You may click and drag the mouse cursor over the camera image to draw a mask area. Right clicking on the camera image brings up the following menu options:Disable All: Disables all mask areasEnable All: Enables all mask areasReset All: Clears all mask areas.Click Save for the mask to take eect.If the video ickers, try enabling this setting.This will mirror the image horizontally.This will ip the image vertically. When turning Flip on, you may want to consider turning Mirror on as well.Select the frequency used by your power lines to avoid interference or distortion.Use the drop-down box to change white balance settings to help balance colors for dierent environments. You can choose from Auto, Outdoor, Indoor, Fluorescent, and Push Hold.

39D-Link DCS-2230L User ManualSection 4: CongurationExposure Mode:Denoise:Brightness:Contrast:Saturation:Sharpness: Reset Default:Changes the exposure mode. Use the drop-down box to set the camera for Indoor, Outdoor, or Night environments, or to Moving to capture moving objects. The Low Noise option will focus on creating a high-quality picture without noise. You can also create 3 dierent custom exposure modes. The Max Gain setting will allow you to control the maximum amount of gain to apply to brighten the picture.This setting controls the amount of noise reduction that will be applied to the picture.Adjust this setting to compensate for backlit subjects.Adjust this setting to alter the color intensity/strength.This setting controls the amount of coloration, from grayscale to fully saturated.Specify a value from 0 to 8 to specify how much sharpening to apply to the image.Click this button to reset the image to factory default settings.

40D-Link DCS-2230L User ManualSection 4: CongurationAudio and VideoYou may congure up to 2 video proles with dierent settings for your camera. Hence, you may set up dierent proles for your computer and mobile display. In addition, you may also congure the two-way audio settings for your camera. After making any changes, click the Save Settings button to save your changes.Aspect ratio:Mode:Frame size / View window area: Maximum frame rate:Set the aspect ratio of the video to 4:3 standard or 16:9 widescreen.Set the video codec to be used to MJPEG or H.264. JPEG can be selected for image mode.Frame size determines the total capture resolution, and View window area determines the Live Video viewing window size. If the Frame size is larger than the Live Video size, you can use the ePTZ controls to look around.16:9 1920x1080, 1280x720, 800x450, 640x360, 480x270, 320x176 4:3 1920x1080, 1280x720, 800x450, 640x360, 480x270, 320x176 Note: If your View window area is the same as your Frame size, you will not be able to use the ePTZ function. A higher frame rate provides smoother motion for videos, and requires more bandwidth. Lower frame rates will result in stuttering motion, and requires less bandwidth.

41D-Link DCS-2230L User ManualSection 4: CongurationVideo Quality:Constant bit rate:Fixed quality:Audio in o:Audio in gain level:Audio out o:Audio out volume level:This limits the maximum frame rate, which can be combined with the "Fixed quality" option to optimize the bandwidth utilization and video quality. If xed bandwidth utilization is desired regardless of the video quality, choose "Constant bit rate" and select the desired bandwidth.The bps will aect the bit rate of the video recorded by the camera. Higher bit rates result in higher video quality.Select the image quality level for the camera to try to maintain. High quality levels will result in increased bit rates.Selecting this checkbox will mute incoming audio.This setting controls the amount of gain applied to incoming audio to increase its volume.Selecting this checkbox will mute outgoing audio.This setting controls the amount of gain applied to outgoing audio to increase its volume.

42D-Link DCS-2230L User ManualSection 4: CongurationPresetThis screen allows you to set preset points for the ePTZ function of the camera, which allows you to look around the camera's viewable area by using a zoomed view. Presets allow you to quickly go to and view a specic part of the area your camera is covering, and you can create preset sequences, which will automatically change the camera's view between the dierent presets according to a dened order and timing you can set.Note: If your View window area is the same as your Frame size, you will not be able to use the ePTZ function. Video Prole:ePTZ Speed:Arrow Buttons and Home Button:Input Preset Name:Preset List:Preset Sequence:This selects which video prole to use. You may select a value between 1 and 10. 0 is the slowest and 10 is the fastest.Use these buttons to move to a specic part of the viewing area, which you can then set as a preset. Click the Home button to return to the center of the viewing area.Enter the name of the preset you want to create, then click the Add button to make a new preset. If an existing preset has been selected from the Preset List, you can change its name by typing in a new name, then clicking the Rename button.Click this drop-down box to see a list of all the presets that have been created. You can select one, then click the GoTo button to change the displayed camera view to the preset. Clicking the Remove button will delete the currently selected preset.This section allows you to create a preset sequence, which automatically moves the camera's view between a set of preset views.

43D-Link DCS-2230L User ManualSection 4: CongurationPreset List: To add a preset to the sequence, select it from the drop-down box at the bottom of this window, set the Dwell time to determine how long the camera view will stay at that preset, then click the Add button. The preset name will appear in the list, followed by the dwell time to view that preset for.You can rearrange your presets in the sequence by selecting a preset in the sequence, then clicking the arrow buttons to move it higher or lower in the current sequence. Clicking the trash can button will remove the currently selected preset from the sequence. If you want to change the dwell time for a preset, select it from the list, enter a new dwell time, then click the Update button.

44D-Link DCS-2230L User ManualSection 4: CongurationMotion DetectionEnabling Video Motion will allow your camera to use the motion detection feature. You may draw a nite motion area that will be used for monitoring. After making any changes, click the Save Settings button to save your changes.Enable Video Motion:Enable PIR:Sensitivity:Percentage:Draw Motion Area:Erase Motion Area:Select this box to enable the motion detection feature of your camera.Select this box to enable Passive Infrared detection.Species the measurable dierence between two sequential images that would indicate motion. Please enter a value between 0 and 100.Species the amount of motion in the window being monitored that is required to initiate an alert. If this is set to 100%, motion is detected within the whole window will trigger a snapshot.Draw the motion detection area by dragging your mouse in the window (indicated by the red square).To erase a motion detection area, simply click on the red square that you wish to remove.Right clicking on the camera image brings up the following menu options:Select All: Draws a motion detection area over the entire screen.Clear All: Clears any motion detection areas that have been drawn.Restore: Restores the previously specied motion detection areas.

45D-Link DCS-2230L User ManualSection 4: CongurationTime and DateThis section allows you to automatically or manually congure, update, and maintain the internal system clock for your camera. After making any changes, click the Save Settings button to save your changes.Time Zone:Enable Daylight Saving:Auto Daylight Saving:Set Date and Time Manually:Oset:Synchronize with NTP Server:NTP Server:Set the Date and Time Manually:Copy Your Computer's Time Settings:Select your time zone from the drop-down menu.Select this to enable Daylight Saving Time.Select this option to allow your camera to congure the Daylight Saving settings automatically.Selecting this option allows you to congure the Daylight Saving date and time manually.Sets the amount of time to be added or removed when Daylight Saving is enabled.Enable this feature to obtain time automatically from an NTP server.Network Time Protocol (NTP) synchronizes the DCS-2230L with an Internet time server. Choose the one that is closest to your location.This option allows you to set the time and date manually.This will synchronize the time information from your PC.

46D-Link DCS-2230L User ManualSection 4: CongurationEvent SetupIn a typical application, when motion is detected, the DCS-2230L sends images to a FTP server or via e-mail as notications. As shown in the illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is triggered, a specied action will be performed. You can congure the DCS-2230L to send snapshots or videos to your e-mail address or FTP site.To start plotting an event, it is suggested to congure server and media columns rst so that the DCS-2230L will know what action shall be performed when a trigger is activated.Event Condition ActionMedia (what to send)Server (where to send)ex.Motion Detection, Periodically, Digital Input, System Rebootex.Snapshot, Video Clipsex.E-mail, FTP

47D-Link DCS-2230L User ManualSection 4: CongurationThe Event Setup page includes 4 dierent sections:• Server • Media• Event• Recording1. To add a new item - "event, server or media," click Add. A screen will appear and allow you to update the elds accordingly.2. To delete the selected item from the pull-down menu of event, server or media, click Delete. 3. Click on the item name to pop up a window for modifying.

48D-Link DCS-2230L User ManualSection 4: CongurationAdd ServerServer Name:E-mail:FTP:Network Storage:SD Card:Enter the unique name of your server.Enter the conguration for the target e-mail server account.Enter the conguration for the target FTP server account.Specify a network storage device. Only one network storage device is supported.Use the camera's onboard SD card storage.You can congure up to 5 servers to save snapshots and/or video to. After making any changes, click the Save Settings button to save your changes. You can click Test to test your congurations.

49D-Link DCS-2230L User ManualSection 4: CongurationAdd MediaMedia Name:Snapshot:Source:Send pre-event image(s) [0~4]:Send post-event image(s) [0~7]:File name prex:Add date and time sux to le name:Enter a unique name for media type you want to create.Select this option to set the media type to snapshots.Set the video prole to use as the media source. Refer to Audio and Video on Audio and Video on page 40 for more information on video proles.Set the number of pre-event images to take. Pre-event images are images taken before the main event snapshot is taken.Set the number of post-event images to take. Post-event images are images taken after the main event snapshot is taken. You can set up to 7 post-event images to be taken.The prex name will be added on the le name.Check it to add timing information as le name sux.There are three types of media, Snapshot, Video Clip, and System Log. After making any changes, click the Save Settings button to save your changes.

50D-Link DCS-2230L User ManualSection 4: CongurationVideo clip:Source:Pre-event recording:Maximum duration:Maximum le size:File name prex:System log:Select this option to set the media type to video clips.Set the video prole to use as the media source. Refer to Audio and Video on page 40 for more information on video proles.This sets how many seconds to record before the main event video clip starts. You can record up to 4 seconds of pre-event video.Set the maximum length of video to record for your video clips.Set the maximum le size to record for your video clips. This is the prex that will be added to the lename of saved video clips.Select this option to set the media type to system logs. This will save the event to the camera system log, but will not record any snapshots or video.

51D-Link DCS-2230L User ManualSection 4: CongurationAdd EventCreate and schedule up to 3 events with their own settings here. After making any changes, click the Save Settings button to save your changes.Event name:Enable this event:Priority:Delay:Video Motion Detection:Periodic:Digital input:System Boot:Network Lost:Passive Infrared Sensor:Time:Enter a name for the event.Select this box to activate this event.Set the priority for this event. The event with higher priority will be executed rst.Select the delay time before checking the next event. It is being used for events of motion detection, digital input, and PIR triggers.Motion is detected during live video monitoring. Select the window that needs to be monitored.The event is triggered in specied intervals. The trigger interval unit is in minutes.The external trigger input to the camera.Triggers an event when the system boots up. Triggers an event when the network connection is lost.Triggers an event when the PIR sensor is activated by moving infrared objects even in dark environment.Select Always or enter the time interval.Select the days and times when events will be detected.

52D-Link DCS-2230L User ManualSection 4: CongurationTrigger D/O:Server:Select to trigger the digital output for a specic number of seconds when an event occurs.Specify the location where the event information should be saved to.

53D-Link DCS-2230L User ManualSection 4: CongurationAdd RecordingRecording entry name:Enable this recording:Priority:Source:Recording schedule:Recording settings:Destination:Total cycling recording size:The unique name of the entry.Select this to enable the recording function.Set the priority for this entry. The entry with a higher priority value will be executed rst.The source of the stream.Schedule the recording entry via days and times.Conguring the setting for the recording.Select the folder where the recording le will be stored.Please input a HDD volume between 200 MB and 2 TB for recording space. The recording data will replace the oldest record when the total recording size exceeds this value. For example, if each recording le is 6 MB, and the total cyclical recording size is 600 MB, then the camera will record 100 les in the specied location (folder) and then will delete the oldest le and create a new le for cyclical recording.Please note that if the free HDD space is not enough, the recording will stop. Before you set up this option please make sure your HDD has enough space, and it is better to not save other les in the same folder as recording les. Here you can congure and schedule the recording settings. After making any changes, click the Save Settings button to save your changes.

54D-Link DCS-2230L User ManualSection 4: CongurationSize of each le for recording:Time of each le for recording:File Name Prex:If this is selected, les will be separated based on the le size you specify.If this is selected, les will be separated based on the maximum length you specify.The prex name will be added on the le name of the recording le(s).

55D-Link DCS-2230L User ManualSection 4: CongurationSD CardFormat SD Card:View Recorded Picture:Playback Recorded Video:Refresh:Click this icon to automatically format the SD card and create "picture" & "video" folders.If the picture les are stored on the SD card, click on the picture folder and choose the picture le you would like to view.If video les are stored on the SD card, click on the video folder and choose the video le you would like to view.Reloads the le and folder information from the SD card.Here you may browse and manage the recorded les which are stored on the SD card.

56D-Link DCS-2230L User ManualSection 4: CongurationAdvancedThis screen allows you to control the behavior of digital input and digital output devices. The I/O connector provides the physical interface for digital output (DO) and digital input (DI) that is used for connecting a variety of external alarm devices such as IR sensors and alarm relays. The digital input is used for connecting external alarm devices and once triggered images will be taken and e-mailed. After making any changes, click the Save Settings button to save your changes.Digital Input/OutputSelect D/I or D/O Mode: The camera will send a signal when an event is triggered, depending upon the type of device connected to the DI circuit.N.C. stands for Normally Closed. This means that the normal state of the circuit is closed. Therefore events are triggered when the device status changes to "Open."N.O. stands for Normally Open. This means that the normal state of the circuit is open. Therefore events are triggered when the device status changes to "Closed."

57D-Link DCS-2230L User ManualSection 4: CongurationICR and IRHere you can congure the ICR and IR settings. An IR(Infrared) Cut-Removable(ICR) lter can be disengaged for increased sensitivity in low light environments.Automatic:Day Mode:Night Mode:Schedule Mode:IR Light Control:O:On:Sync:Schedule:The Day/Night mode is set automatically. Generally, the camera uses Day mode and switches to Night mode when needed.Day mode enables the IR Cut Filter.Night mode disables the IR Cut Filter.Set up the Day/Night mode using a schedule. The camera will enter Day mode at the starting time and return to Night mode at the ending time.The camera can enable or disable the IR (infrared) light according to your preferences. This setting lets you adjust IR strength depending on your specic application.The IR light will always be o.The IR light will always be on.The IR light will turn on when the ICR sensor is on.The IR light will turn on or o according to the schedule that you specify below.

58D-Link DCS-2230L User ManualSection 4: CongurationHTTPSThis page allows you to install and activate an SSL certicate for secure HTTPS access to your camera. After making any changes, click the Save Settings button to save your changes.Enable HTTPS Secure Connection:Create Certicate Method:Certicate Information:Note:Enable the HTTPS service.Choose the way the certicate should be created. Three options are available: Create a self-signed certicate automatically Create a self-signed certicate manually Create a certicate request and installDisplays the status and details of the certicate. Click on CSR Property and Certicate Property to view details of the certicates.The certicate cannot be removed while the HTTPS is still enabled. To remove the certicate, you must rst uncheck Enable HTTPS secure connection.

59D-Link DCS-2230L User ManualSection 4: CongurationAccess ListHere you can set access permissions for users to view your DCS-2230L. Allow list:Start IP address:End IP address:Delete allow list:Deny list:Delete deny list:The list of IP addresses that have the right to access the camera.The starting IP Address of the devices (such as a computer) that have permission to access the video of the camera. Note: A total of seven lists can be congured for both columns.The ending IP Address of the devices (such as a computer) that have permission to access the video of the camera.Click Add to save the changes made.Remove the customized setting from the Allow List.The list of IP addresses that have no access rights to the camera.Remove the customized setting from the Delete List.For example:When the range of the Allowed List is set from 1.1.1.0 to 192.255.255.255 and the range of the Denied List is set from 1.1.1.0 to 170.255.255.255. Only users with IPs located between 171.0.0.0 and 192.255.255.255 can access the DCS-2230L.Alowed ListDenied List

60D-Link DCS-2230L User ManualSection 4: CongurationSNMPThe Simple Network Management Protocol is an application layer protocol that facilitates the exchange of management information between network devices. It helps network administrators to remotely manage network devices and nd, solve network problems with ease.Enable SNMPv1, SNMPv2c:Read/Write Community:Read Only Community:Enable SNMPv3:Read/Write and Read Only Security Names:Authentication Type:Authentication/Encryption Password:Select this to enable SNMPv1 and 2.Enter a name for the read community of your SNMP server.Enter a name for the write community of your SNMP server.Select this to enable SNMPv3. You will need to ask your network administrator for the SNMP authentication information and input them into the elds below.Enter custom names for your read/write and read only SNMP accounts in the text boxes.Select the authentication protocol used for SNMP exchanges between this user and the local SNMP engine. SHA and MD5 protocols are supported.Enter the authentication and encryption passwords for your read/write and read only SNMP accounts in these boxes.

61D-Link DCS-2230L User ManualSection 4: CongurationMaintenanceYou may modify the name and administrator’s password of your camera, as well as add and manage the user accounts for accessing the camera. You may also use this section to create a unique name and congure the OSD settings for your camera.Admin Password Setting:Add User Account:User Name:Password:User List:IP Camera Name:Enable OSD:Label:Show Time:LED:Set a new password for the administrator’s account. Retype it and click Save for it to take eect.Add new user account. Click Add to save the account.The user name for the new account.The password for the new account.All the existing user accounts will be displayed here. You may delete accounts included in the list, but you may want to reserve at least one as a guest account.Create a unique name for your camera that will be added to the le name prex when creating a snapshot or a video clip. Select this option to enable the On-Screen Display feature for your camera.Enter a label for the camera, which will be shown on the OSD when it is enabled.Select this option to enable the time-stamp display on the video screen. Click Save when you are done.You may specify whether or not to illuminate the status LED on the camera. Click Save when you are done.AdminDCS-2230LDCS-2230L

62D-Link DCS-2230L User ManualSection 4: CongurationSystemIn this section, you may backup, restore and reset the camera conguration, or reboot the camera.Save To Local Hard Drive:Load From Local Hard Drive:Restore to Factory Default:Reboot Device:Enable Schedule Reboot:You may save your current camera conguration as a le on your computer.Locate a pre-saved conguration by clicking Browse and then restore the pre-dened settings to your camera by clicking Load Conguration.You may reset your camera and restore the factory settings by clicking Restore Factory Defaults.This will restart your camera.Check to enable this feature and select the days and times your DCS-2230L will automatically reboot. Click Save for it to take eect.

63D-Link DCS-2230L User ManualSection 4: CongurationFirmware UpgradeThe camera's current rmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available rmware version.To upgrade the rmware on your DCS-2230L, please download and save the latest rmware version from the D-Link Support Page to your local hard drive. Locate the le on your local hard drive by clicking the Browse button. Select the le and click the Upload button to start upgrading the rmware.Current Firmware Version:Current Product Name:File Path:Upload:Displays the detected rmware version.Displays the camera model name.Locate the le (upgraded rmware) on your hard drive by clicking Browse.Uploads the new rmware to your camera.DCS-2230L

64D-Link DCS-2230L User ManualSection 4: CongurationStatusThis page displays detailed information about your device and network connection.Device InfoDCS-2230L

65D-Link DCS-2230L User ManualSection 4: CongurationThis page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information.Logs

66D-Link DCS-2230L User ManualSection 4: CongurationThis page provides helpful information regarding camera operation.Help

67D-Link DCS-2230L User ManualAppendix A: DI/DO SpecicationsDI/DO SpecicationsPin 1 Pin 4Pin 3Pin 2PIN FUNCTION NOTE1 Digital Out (DO) Uses an open-drain NFET transistor with the source connected to GND in camera. If used with an external relay, a diode must be connected in parallel with the load for protection against voltage transients. Max loading is 100 mA.2 Digital In (DI) A switch from DI to DC 5 V, activated by setting NO. or NC.3 DC 5V OUTPUT DC 5 V Output / Max. 100 mA4 GND GNDInternal 5V Power External 3~12V PowerDODI5VDNDN.C / N.O100 mAALARMReed switch DiodeDC Power 5VRDODI5VDNDN.C / N.OALARMReed switch DiodeDC Power 5VRDC Power 3V~12V100 mA

68D-Link DCS-2230L User ManualAppendix B: Technical SpecicationsTechnical SpecicationsCamera Camera Hardware Prole 1/2.7” 2 Megapixel CMOS sensor 5 meter IR illumination distance Minimum illumination: 0 lux with IR LED on Built-in Infrared-Cut Removable (ICR) Filter module Built-in PIR sensor (5 meter) Built-in microphone and speaker 10x digital zoom Focal length: 2.8 mm Aperture: F1.8 Angle of view: (H) 103° (V) 55° (D) 118°Image Features Congurable image size, quality, frame rate, and bit rate Time stamp and text overlays Congurable motion detection windows Congurable privacy mask zones Congurable shutter speed, brightness, saturation, contrast, and sharpnessVideo Compression Simultaneous H.264/MJPEG format compression H.264 multicast streaming JPEG for still imagesVideo Resolution 16:9 - Up to 30 fps at 1920 x 1080, 1280 x 720, 800 x 450, 640 x 360, 480 x 2704:3 - Up to 30 fps at 1440 x 1080, 1280 x 960, 1024 x 768, 800 x 600, 600 x 480, 320 x 240Audio Support G.711, AACExternal Device Interface 10/100 BASE-T Fast Ethernet port 802.3af PoE (DCS-2210L only) IEEE 802.11n/b/g wireless with WPS (DCS-2230L only) DI/DO port microSD/SDHC card slotNetwork Network Protocols IPv6 / IPv4TCP/IPUDPICMPDHCP clientNTP client (D-Link)DNS clientDDNS client (D-Link)SMTP clientFTP clientBonjourHTTP / HTTPS Samba clientPPPoEUPnP port forwardingRTP / RTSP/ RTCPIP lteringQoSCoSMulticastIGMPONVIF compliantSecurity Administrator and user group protection Password authentication HTTP and RTSP digest encryption

69D-Link DCS-2230L User ManualAppendix B: Technical SpecicationsSystem ManagementSystem Requirements for Web Interface Operating System: Microsoft Windows 8/7 (32/64-bit)/Vista (32/64-bit)/XP, Mac OS X 10.5 or above Browser: Internet Explorer 7, Firefox 12, Safari 7 or aboveEvent Management Motion detection, Periodic, Digital Input, System Boot, Network Lost, PIR Event notication and saving/uploading of snapshots/video clips via e-mail, FTP, network storage, or SD card Supports multiple SMTP and FTP servers Multiple event notications Multiple recording methods for easy backupRemote Management Take snapshots/video clips and save to local hard drive or NAS via web browser Conguration interface accessible via web browserMobile Support mydlink mobile app for iOS and Android mobile devicesD-ViewCam™ System Requirements Operating System: Microsoft Windows 8/7 (32/64-bit)/Vista (32/64-bit)/XP Protocol: Standard TCP/IPD-ViewCam™ Software Functions Remote management/control of up to 32 cameras Viewing of up to 32 cameras on one screen Supports all management functions provided in web interface Scheduled motion triggered, or manual recording optionsGeneral Weight DCS-2210L: 80 gDCS-2230L: 75 gExternal Power Adaptor Input: 100 to 240 V AC, 50/60 Hz Output: 5 V DC, 1.2 A, 50/60 HzPower Consumption DCS-2210L: Max. 3.5 WDCS-2230L: Max. 4 WTemperature Operating: 0 to 40 °C (32 to 104 °F) Storage: -20 to 70 °C (-4 to 158 °F)Humidity Operating: 20% to 80% non-condensing Storage: 5% to 95% non-condensingCertications CECE LVDFCCC-Tick

70D-Link DCS-2230L User ManualAppendix B: Technical SpecicationsDimensions•

71D-Link DCS-2230L User ManualAppendix C: Safety StatementsCE Mark Warning:This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.FCC Statement:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Safety Statements

72D-Link DCS-2230L User ManualAppendix C: Safety StatementsIMPORTANT NOTICE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.The availability of some specic channels and/or operational frequency bands are country dependent and are rmware programmed at the factory to match the intended destination. The rmware setting is not accessible by the end user.For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link oce.Industry Canada Notice:This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device has been designed to operate with an antenna having a maximum gain of 2 dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.

Navigation menu

Upload a User Manual

Namespaces

Wiki Guide
HTML
PDF
Info

Views

User Manual
Discussion / Help

Navigation

© 2024 UserManual.wiki | Privacy Policy

Contact Us
DMCA