D Link CS930LA1 Wireless N Home Network Camera User Manual DCS 930 UserMan

D Link Corporation Wireless N Home Network Camera DCS 930 UserMan

(DCS-930)UserMan

Download: D Link CS930LA1 Wireless N Home Network Camera User Manual  DCS 930 UserMan
Mirror Download [FCC.gov]D Link CS930LA1 Wireless N Home Network Camera User Manual  DCS 930 UserMan
Document ID1334285
Application IDWvnT6H09HfvjlzsQiKx2gQ==
Document Description(DCS-930)UserMan
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize201.53kB (2519164 bits)
Date Submitted2010-08-27 00:00:00
Date Available2010-08-29 00:00:00
Creation Date2010-05-07 16:07:48
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2010-08-20 14:07:58
Document Title(DCS-930)UserMan
Document CreatorAdobe InDesign CS4 (6.0.5)

Table of Contents
Table of Contents
Product Overview......................................................... 4
Package Contents.................................................... 4
System Requirements.............................................. 4
Introduction............................................................... 5
Features................................................................... 6
Hardware Overview.................................................. 7
Front View........................................................... 7
Rear View........................................................... 8
Hardware Installation................................................ 9
Installation................................................................... 10
Wireless Installation Considerations....................... 10
Starting the Camera Installation Wizard................. 11
WPS - Hardware Push Button Setup................ 12
Using the Configuration Menu................................ 13
Configuration.......................................................... 15
Live Video......................................................... 15
Setup > Wizard................................................. 15
Internet Connection Setup Wizard............... 16
Network Setup............................................. 18
Setup > Wireless............................................... 19
Wireless Interface........................................ 19
Setup > DDNS ................................................. 20
Setup > Image Setup........................................ 21
Image Settings............................................. 21
Setup > Video................................................... 22
D-Link DCS-930 User Manual
Video Configuration..................................... 22
Setup > Audio................................................... 23
Setup > Motion Detect...................................... 24
Setup > Mail...................................................... 25
Email Account.............................................. 25
Time Schedule............................................. 26
Setup > FTP...................................................... 27
FTP Server.................................................. 27
Time Schedule............................................. 28
Setup > Time and Date..................................... 29
Maintenance > Admin....................................... 30
Maintenance > System..................................... 31
Maintenance > Firmware Upgrade................... 32
Status > System................................................ 33
Status > Active User......................................... 34
Wireless Security....................................................... 35
What is WEP?........................................................ 35
What is WPA?........................................................ 36
Using & Configuring the DCS-930.......................... 37
Wireless Security.................................................... 40
What is WEP?........................................................ 40
What is WPA?........................................................ 41
Using & Configuring the DCS-930 with a NAT
Router............................................................... 42
Table of Contents
Wireless Basics.......................................................... 49
Networking Basics..................................................... 54
Check your IP address........................................... 54
Statically Assign an IP address.............................. 55
Troubleshooting......................................................... 56
Technical Specifications........................................... 58
D-Link DCS-930 User Manual
Section 1 - Product Overview
Product Overview
Package
Contents
• DCS-930 Network Camera
• CAT5 Ethernet Cable
• Power Adapter
• Manual and Software on CD
• Quick Install Guide
• Camera Stand
Note: Using a power supply with a different voltage than the one included with your
product will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.
System Requirements
• Computer with Microsoft Windows® 7, XP®, or Vista®
• PC with 1.3GHz or above; at least 128MB RAM
• Internet Explorer 6 or above , Firefox 3.5 or above, Safari 4
• Existing 10/100 Ethernet-based network or 802.11n wireless network
D-Link DCS-930 User Manual
Section 1 - Product Overview
Introduction
Congratulations on your purchase of the DCS-930 Network Camera. The DCS-930 is a versatile and unique solution for your small
office or home. Unlike a webcam, the DCS-930 is a stand-alone system with a built-in CPU that transmits high quality video images
for monitoring. The DCS-930 can be remotely accessed, and controlled using a Web browser over the Intranet or Internet. The simple
installation procedure and intuitive Web-based interface offer easy integration with your Ethernet/Fast Ethernet or 802.11n wireless
network. The DCS-930 also comes with remote monitoring capability for a complete and cost-effective home security solution.
D-Link DCS-930 User Manual
Section 1 - Product Overview
Features
Simple to Use
The DCS-930 is a stand-alone system with a built-in CPU, requiring no special hardware or software such as PC frame grabber cards.
The DCS-930 supports both ActiveX mode for Internet Explorer and Java mode for other browsers such as Firefox® and Safari®.
Supports a Variety of Platforms
Supporting TCP/IP networking, HTTP, and other Internet related protocols. The DCS-930 can also be integrated easily into other
Internet/Intranet applications because of its standards-based features.
802.11n Wireless or Ethernet/Fast Ethernet Support
The DCS-930 offers wireless 802.11n and Ethernet/Fast Ethernet connectivity, making the DCS-930 easy to integrate into your existing
network environment. The DCS-930 works with a 10 Mbps Ethernet based network or 100 Mbps Fast Ethernet based network for
traditional wired environments, and works with 802.11n routers or access points for added flexibility. The Site Survey feature also allows
you to view and connect to any available wireless networks.
Web Configuration
Using a standard Web browser, administrators can configure and manage the Network Camera directly from its own Web page via
Intranet or Internet. This means you can access your DCS-930 anytime, anywhere in the world.
Broad Range of Applications
With today’s high-speed Internet services, the Network Camera can provide the ideal solution for delivering live video images over the
Intranet and Internet for remote monitoring. The Network Camera allows remote access using a Web browser for live image viewing,
and allows the administrator to manage and control the Network Camera anytime, anywhere in the world. Many applications exist,
including industrial and public monitoring of homes, offices, banks, hospitals, child-care centers, and amusement parks.
D-Link DCS-930 User Manual
Section 1 - Product Overview
Hardware Overview
Front View
Camera Lens
Microphone
D-Link DCS-930 User Manual
Power and Link LED
Section 1 - Product Overview
Rear View
Ethernet Connector
Power Connector
Reset
WPS LED
WPS Button
Camera Stand
D-Link DCS-930 User Manual
Section 1 - Product Overview
Hardware Installation
Connect the Ethernet Cable
Connect the included Ethernet cable to the network cable connector
located on the bottom panel of the DCS-930 and attach it to the
network.
Attach the External Power Supply
Attach the external power supply to the DC power input connector
located on the bottom panel of the DCS-930 and connect it to
your wall outlet or power strip. Power is confirmed when the green
LED Power Indicator located below the lens on the DCS-930 is
illuminated.
D-Link DCS-930 User Manual
Section 2 - Installation
Installation
Wireless Installation Considerations
The D-Link Wireless Network Camera lets you access your network using a wireless connection from anywhere within the operating range
of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must
pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise
in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Minimize the number of walls and ceilings between your adapter and other network devices (such as your Network Camera) - each
wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters).
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost
3 feet (1 meter) thick. At a 2-degree angle, it looks over 42 feet (14 meters) thick. Position your devices so that the signal will travel
straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum studs may weaken the wireless signal. Try to position your
access points, wireless routers, and other networking devices where the signal passes through drywall or open doorways. Materials
and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade
your wireless signal.
4. Keep your product at least 3-6 feet or 1-2 meters away from electrical devices or appliances that generate RF noise.
5. If you are using 2.4GHz cordless phones or other radio frequency sources (such as microwave ovens), your wireless connection may
degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible.
The base transmits a signal even if the phone in not in use.
D-Link DCS-930 User Manual
10
Section 3 - Installation
Starting the Camera Installation Wizard
Insert the Installation CD-ROM into your computer’s optical drive to start the autorun program.
The CD-ROM will open the Camera Installation Wizard. Simply click Start to go through the Installation Wizard, which will guide you
through the installation process from connecting your hardware to configuring your camera.
D-Link DCS-930 User Manual
11
Section 3 - Configuration
WPS - Hardware Push Button Setup
Alternatively, you may create a WPS connect using the WPS Button on the back
of the camera.
To create a WPS connection:
Step 1
Press and hold the WPS button on the side of the camera for three seconds.
The blue WPS status LED above the button will blink.
Step 2
Press the WPS button on your router within 60 seconds. The WPS button is
usually on the front or side of your router. On some routers, you may need to log
in to the web interface and then click on an onscreen button to activate the WPS
feature. If you are not sure where the WPS button is on your router, please refer
to your router’s User Manual.
The DCS-930 will automatically create a wireless connection to your router.
While connecting, the green LED will flash and your camera will reboot.
D-Link DCS-930 User Manual
WPS Button
12
Section 4 - Configuration
Using the Configuration Menu
After completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in Web configuration utility is
designed to allow you to easily access and configure your DCS-930. At the end of the wizard, click Go To Camera, or enter the IP address
of your camera into a web browser, such as Internet Explorer®. To log in, use the User name admin and the password you created in the
Installation Wizard. If you did not create a password, the default password is blank. After entering your password, click OK.
Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the default IP is 192.168.0.20.
D-Link DCS-930 User Manual
13
Section 3 - Configuration
Click the ActiveX or Java radio button to view live video.
Please make sure that you have the latest version of Java application installed on your computer to ensure proper
operation when viewing the video in Java mode. The Java application can be downloaded at no cost from Sun’s web site.
(http://www.java.com)
When you connect to the home page of your camera, you will be prompted to download ActiveX. If you want to use ActiveX to view your
video images instead of Java, then you must download ActiveX.
D-Link DCS-930 User Manual
14
Section 3 - Configuration
Configuration
Live Video
ActiveX: For Windows® Users that do not have Java installed, please choose this option
to view video streaming on the Home page.
Java: For Windows® users that have Java installed, you can also use this for viewing
video. Mac users must choose this mode to view video.
Setup > Wizard
You may choose to configure your network by using the Internet Connection Setup
Wizard that includes step-by-step instructions. Otherwise, you may manually configure
your connection using the Manual Internet Connection Setup.
D-Link DCS-930 User Manual
15
Section 3 - Configuration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to configure your
new D-Link Camera and connect the camera to the Internet.
Click Next
You may configure your camera using
• DHCP Connection (by default), where your DHCP server will
automatically assign dynamic IP to your device.
• Static IP Address if your ISP has already assigned an IP address to
you.
• PPPoE connection, where your camera is directly connected to the
Internet through a DSL modem.
* Input the DNS information if you have chosen and assigned a Static IP
Address for your camera.
Click Next
D-Link DCS-930 User Manual
16
Section 3 - Configuration
If you have a Dynamic DNS account and would like the camera to
update your IP address automatically, enable DDNS and enter your host
information.
Click Next
Enter a name for your camera.
Click Next
Configure the correct time to ensure that all events triggered, captured and
scheduled at the right time.
Click Next
This page displays your configured settings. Click Apply to save and
activate the setting, or Back to change your settings.
Click Apply
D-Link DCS-930 User Manual
17
Section 3 - Configuration
Network Setup
This section allows you to configure your network settings.
DHCP: Select this connection if you have a DHCP server running on your
network and would like a dynamic IP address to be updated to your
camera automatically.
Static IP Client: You may obtain a static or fixed IP address and other network
information from your network administrator for your camera. A
static IP address will ease you for accessing your camera in the
future.
IP Address: The fixed IP address
Subnet Mask: The default value is “255.255.255.0.” Used to
determine if the destination is the same subnet.
Default Gateway: The gateway used to forward frames to
destinations in a different subnet. Invalid gateway settings may
cause the failure of transmissions to a different subnet.
Primary DNS: Primary domain name server that translates names to IP addresses.
Secondary DNS: Secondary domain name server to backup the Primary DNS.
PPPoE Settings: You may configure a Second HTTP port that will allow you to connect to the camera via a standard web browser. The port can be
set to a number other than the default TCP ports 80. A corresponding port must be opened on the router. For example, if the port
is changed to 1010, users must type in the web browser “http://192.168.0.100:1010” instead of “http://192.168.0.100”.
Port Settings: You may configure a Second HTTP port that will allow you to connect to the camera via a standard web browser. The port can be
set to a number other than the default TCP ports 80. A corresponding port must be opened on the router. For example, if the port
is changed to 1010, users must type “http://192.168.0.100:1010” instead of only “http://192.168.0.100”.
UPnP Settings: Enable this setting to configure your camera as an UPnP device in the network.
D-Link DCS-930 User Manual
18
Section 3 - Configuration
Setup > Wireless
This section allows you to setup and configure the wireless settings
on your camera.
Wireless Interface
SSID: Service Set Identifier, an identifier for your wireless network.
Channel: The default setting is channel 6. Select the same channel that is using by other wireless devices within your network. When
there is interference from the wireless networks that overlap with one another, you may change the channel to obtain maximum
performance for your connection.
Connection Mode: Infrastructure is a wireless connection using an access point as a transmission point of all wireless devices. Ad-Hoc is a
wireless connection used without an access point, where your DCS-930 is directly connecting to your PC. This is done using
the on-board wireless adapter on the DCS-930 connected to a wireless adapter on the PC.
Site Survey: This page will allow you to select a wireless network that the DCS-930 was able to detect.
Wireless Security For security, there are three choices; None, WEP, and WPA-PSK / WPA2-PSK. Select the same encryption method that is being
Mode: used by your wireless device/ router.
WPA-PSK /
WPA2PSK
Settings: An appropriate Preshared Key, which is needed in order to connect to the wireless network..
D-Link DCS-930 User Manual
19
Section 3 - Configuration
Setup > DDNS
This section allows you to configure the DDNS setting for your
camera. DDNS will allow all users to access your camera using
a domain name instead of an IP address.
DDNS: (Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it
has been modified. The username and password are required when using the DDNS service.
Enable: Click to enable the DDNS function.
Server Address: Select your Dynamic DNS Server from the pull down menu.
Host Name: Enter the host name of the DDNS server.
User Name: Enter your username or e-mail used to connect to the DDNS.
Password: Enter your password used to connect to the DDNS server.
D-Link DCS-930 User Manual
20
Section 3 - Configuration
Setup > Image Setup
This section allows you to configure the image settings for your
camera.
Image Settings
Enable
Antiflicker: Select this box to enable antiflicker.
Flip Image: Select this box to vertically rotate the video. If the camera is installed upside down, Flip Image and Mirror should both be
checked.
Mirror: Horizontally rotates the video.
Brightness
Control: Allows you to adjust the brightness level.
Contrast
Control: Allows you to adjust the contrast level.
Saturation
Control: Allows you to adjust the saturation level.
D-Link DCS-930 User Manual
21
Section 3 - Configuration
Setup > Video
This section allows you to configure the video settings for your
camera.
Video Configuration
Video Profile: This section allows you to change the Encode Type, Resolution, FPS, and Quality.
Encode Type: The compression format used when viewing your camera.
Resolution: Select the desired video resolution from three formats: 640x480, 320x240, and 160x120. The higher setting can
obtain better quality. However, it will use more resource within your network.
FPS: Select the optimal setting depending on your network status. Please note that the higher setting can obtain better
quality. However, it will use more resources within your network.
JPEG Quality: Choose one of five levels of image quality: Highest, High, Medium, Low, and Lowest.
View Mode: Select the mode for viewing the camera image. Select Image for a still images, ActiveX for Internet Explorer, or
Java for other web browsers.
Light
Frequency: Select the proper frequency (50Hz or 60Hz) to reduce image flicker.
D-Link DCS-930 User Manual
22
Section 3 - Configuration
Setup > Audio
Enabling audio setting will allow you to listen to audio from the camera
through your PC’s audio output.
Note: Please wait a few seconds for the camera to adjust the audio
after the setting has been selected.
Audio Settings: You may Enable or Disable the camera audio feed.
Volume
Settings: Select the desired volume percentage level.
D-Link DCS-930 User Manual
23
Section 3 - Configuration
Setup > Motion Detect
Enabling Video Motion will allow your camera to use the motion detection
feature. You may draw a finite motion area that will be used for monitoring.
Motion Select this box to enable the motion detection feature of your
Detection: camera.
Sensitivity: Specifies the measurable difference between two sequential
images that would indicate motion. Please enter a value
between 0 and 100.
Detection Use your mouse to click on the blocks that you would like to
Areas: monitor for motion.
D-Link DCS-930 User Manual
24
Section 3 - Configuration
Setup > Mail
Email Account
This section allows you to configure the email notification settings for your
camera.
SMTP Server This is the domain name or IP address of your external e-mail
Address: server.
Sender e-mail This is the e-mail address of the person sending the camera
Address: snapshots.
Receiver e-mail
Address: This is the e-mail address of the recipient.
User Name: If the SMTP server uses authentication, you must enter your user
name here.
Password: This is the password that corresponds to your user name to
connect to the SMTP server.
D-Link DCS-930 User Manual
25
Section 3 - Configuration
Time Schedule
Enable e-mail
image to e-mail Choosing Always will start sending snapshots to the recipient’s e-mail account right away. Choosing Schedule will allow you to
account: schedule when to start and stop the sending of snapshots to the recipient’s e-mail account.
Interval: The frequency of the snapshot interval can also be configured from 1 to 65535 seconds.
Test E-mail This will send a snapshot to the e-mail account that you have configured in the E-mail section. If you have configured the SMTP
Account: account correctly, you will be able to send a test file to the e-mail account of the recipient.
D-Link DCS-930 User Manual
26
Section 3 - Configuration
Setup > FTP
FTP Server
This section allows you to configure a FTP server to receive images from the camera.
Host Address: This is the IP address of the FTP server that you will be connecting to.
Port Number: Default is port 21. If changed, external FTP client program must change
the server connection port accordingly.
User Name: Specifies the user name to access the external FTP server. If you are
to upload snapshots to an FTP server you will need to fill in the Domain
name or IP address of your external FTP server. The following user
settings must be correctly configured for remote access.
Password: Specifies the password to access the external FTP server.
Directory Path: Specifies the destination folder in the external FTP server.
Passive Mode: Enabling passive mode will allow access to an external FTP server if
your camera is behind a router protected by a firewall.
D-Link DCS-930 User Manual
27
Section 3 - Configuration
Time Schedule
Enable upload image to
FTP server: Checking this box will enable video uploads to the FTP server you have selected.
Always: Selecting this option allows snapshots to be uploaded to your FTP as soon as you click Apply.
Schedule: Selecting this option allows you to configure specific times when you want the snapshots to be uploaded to your FTP
server.
Video Frequency: Users can select in frames per second (1, 2, 3 or auto, in auto this could go to 4). The user can also select a duration for
each frame from 1 to 65535 seconds.
Base File Name: This will be the name that precedes the time, for example DCS9302010072116425101.jpg. This means that the camera
took a snapshot in the year 2010, July 21 at 16th hour (4 o’clock), 42 minutes and 51 seconds and it is picture number
one.
File: If Overwrite is selected, only a few images will be constantly refreshed, depending on how many snapshots you choose
to have sent. Select Date/Time Suffix and the pictures will be named with a date and time also. An example of this can
be seen above under the Base file name category. Select a Sequence Number Suffix up to 1024 and all the pictures
will be numbered from 1-1024. Up to 1024 pictures can be configured. Picture number 1025 will reset to number 1.
Test FTP Server: This will send a snapshot to the FTP server that you have configured in the Upload section. If you have configured the
FTP correctly, you will be able to see a test file on your FTP server.
D-Link DCS-930 User Manual
28
Section 3 - Configuration
Setup > Time and Date
This section allows you to configure the settings of the internal system
clocks for your camera.
Test FTP Server: Select the time zone for your region from the pulldown menu.
Synchronize NTP Server: Network Time Protocol will synchronize your
camera with an Internet time server. Choose the
one that is closest to your camera.
Copy your Computer’s Click to synchronize the time information from
Time Settings: your PC.
Set the Date and Time
Manually: Select this to set the time manually.
D-Link DCS-930 User Manual
29
Section 3 - Configuration
Maintenance > Admin
This section allows you to change the administrator’s password and
configure the server settings for your camera. You can also manage
the user account(s) that access to your camera.
Camera Name: Specity a name for your camera
LED Control: Select Normal to enable the LED on the front of
the device, or select off to disable the LED.
User Access Control: Select Enable to enable user access control or
Disable to allow only the administrator account to
access the camera.
Snapshot URL Select Enable to allow access to the current
Authentication: camera snapshot via the web address indicated.
Add User Account: Create new user for accessing the video image.
Enter the user name, password, and password
confirmation, and click Add. A maximum of 8
user accounts can be added into the user list.
User List: Displays the account names of authorized users.
D-Link DCS-930 User Manual
30
Section 3 - Configuration
Maintenance > System
This section allows you to save and restore your configuration,
restore the factory settings, and/or restart the camera.
D-Link DCS-930 User Manual
31
Section 3 - Configuration
Maintenance > Firmware Upgrade
Your current firmware version and date will be displayed on your
screen. You may go to the D-Link Support Page to check for the
latest firmware versions available.
To upgrade the firmware on your DCS-930, please download
and save the latest firmware version from the D-Link Support
Page to your local hard drive. Locate the file on your local hard
drive by using the Browse button. Then, open the file and click
the “Upload” button to start the firmware upgrade.
D-Link DCS-930 User Manual
32
Section 3 - Configuration
Status > Device Info
This section displays all the details information about your
device and network settings.
D-Link DCS-930 User Manual
33
Section 3 - Configuration
Status > Active User
This page lists all the active user’s information including the User
Name, IP address, and the time that camera access began.
D-Link DCS-930 User Manual
34
Section 4 - Security
Wireless Security
This section will show you the different levels of security you can use to protect your data from intruders.
The DCS-930 offers the following types of security:
• WPA-PSK (Pre-Shared Key)
• WEP (Wired Equivalent Privacy)
What is WEP?
WEP stands for Wired Equivalent Privacy. It is based on the IEEE 802.11 standard and uses the RC4 encryption algorithm. WEP provides
security by encrypting data over your wireless network so that it is protected as it is transmitted from one wireless device to another.
To gain access to a WEP network, you must know the key. The key is a string of characters that you create. When using WEP, you must
determine the level of encryption. The type of encryption determines the key length. 128-bit encryption requires a longer key than 64bit encryption. Keys are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard
Code for Information Interchange – alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to
remember. The ASCII string is converted to HEX for use over the network. Four keys can be defined so that you can change keys easily.
D-Link DCS-930 User Manual
35
Section 4 - Security
What is WPA?
WPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).
The 2 major improvements over WEP:
Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm
and, by adding an integrity-checking feature, ensures that the keys haven’t been tampered with. WPA2 is based on 802.11i and uses
Advanced Encryption Standard instead of TKIP.
User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access
to a wireless network based on a computer’s hardware-specific MAC address, which is relatively simple to be sniffed out and stolen.
EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between
8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your
wireless router or access point.
D-Link DCS-930 User Manual
36
Section 4 - Security
Using & Configuring the DCS-930
D-Link’s DCS-930 is a versatile and cost effective Network Camera for video monitoring. It can also serve as a powerful surveillance
system in security applications. The DCS-930 can be used with any wired or 802.11n wireless router. This section explains how to view
the camera from either the Internet or from inside your internal network.
Materials Needed:
•
•
•
•
1 DCS-930 Network Camera
1 Ethernet Cable
A Wired or Wireless router such as the D-Link DI-624 Wireless Router
Ethernet based PC for system configuration
Setting Up the DCS-930 For Use Behind a Router
Installing a DCS-930 Network Camera on your network is an easy 4–step procedure:
1. Assign a Local IP Address to Your Network Camera
2. View the Network Camera Using Your Internet Explorer Web Browser
3. Access the Router with Your Web Browser
4. Open Virtual Server Ports to Enable Remote Image Viewing
This section is designed to walk you through the setup process for installing your camera behind a router and enable remote video
viewing. For the basic setup of the DCS-930, follow the steps outlined in the Quick Installation Guide.
D-Link DCS-930 User Manual
37
Section 4 - Security
After you have completed the setup of the DCS-930 outlined in the Quick Installation Guide you will have an operating camera that has
an assigned IP Address. Because you are using a router to share the Internet with one or more PCs, the IP Address assigned to the
Network Camera will be a local IP Address. This allows viewing within your Local Area Network (LAN) until the router is configured to
allow remote viewing of the camera over the Internet.
1. Assign a Local IP Address to Your Camera
Run the Setup Wizard program from the CD included with the DCS-930. Follow the steps in the Quick Installation Guide to configure the
DCS-930. The camera will be assigned a local IP Address that allows it to be recognized by the router. Write down this IP Address for
future reference.
This is the IP Address assigned to your camera (192.168.0.120 is only an example). You will probably have a different IP Address.
Your Camera’s IP Address
D-Link DCS-930 User Manual
38
Section 4 - Security
2. View the Network Camera Using Your Internet Explorer Web Browser
Run your Internet Explorer Web browser. In the address bar, type in the IP Address that was assigned to the Network Camera by the
Installation Wizard program. The DCS-930 Home Page appears with a window displaying live video from the camera. You are able to
view this screen from any PC running Internet Explorer on your LAN.
Click on the Configuration button on the left side of the display. Scroll to the bottom of the Network Configuration page to display the ports
used by HTTP and Streaming video.
D-Link DCS-930 User Manual
39
Section 4 - Security
Wireless Security
This section will show you the different levels of security you can use to protect your data from intruders.
The DCS-930 offers the following types of security:
• WPA-PSK (Pre-Shared Key)
• WEP (Wired Equivalent Privacy)
What is WEP?
WEP stands for Wired Equivalent Privacy. It is based on the IEEE 802.11 standard and uses the RC4 encryption algorithm. WEP provides
security by encrypting data over your wireless network so that it is protected as it is transmitted from one wireless device to another.
To gain access to a WEP network, you must know the key. The key is a string of characters that you create. When using WEP, you must
determine the level of encryption. The type of encryption determines the key length. 128-bit encryption requires a longer key than 64bit encryption. Keys are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard
Code for Information Interchange – alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to
remember. The ASCII string is converted to HEX for use over the network. Four keys can be defined so that you can change keys easily.
D-Link DCS-930 User Manual
40
Section 4 - Security
What is WPA?
WPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).
The 2 major improvements over WEP:
Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm
and, by adding an integrity-checking feature, ensures that the keys haven’t been tampered with. WPA2 is based on 802.11i
and uses Advanced Encryption Standard instead of TKIP.
User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates
access to a wireless network based on a computer’s hardware-specific MAC address, which is relatively simple to be sniffed
out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can
access the network.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between
8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your
wireless router or access point.
D-Link DCS-930 User Manual
41
Section 4 - Security
Using & Configuring the DCS-930 with a NAT Router
D-Link’s DCS-930 is a versatile and cost effective Network Camera offering both video and audio monitoring. It can also serve as a powerful
surveillance system in security applications. The DCS-930 can be used with any wired or 802.11n/g wireless router. This section explains
how to view the camera from either the Internet or from inside your internal network.
Materials Needed:
• 1 DCS-930 Network Camera
• 1 Ethernet Cable
• A Wired or Wireless router such as the D-Link DIR-655 Wireless Router
• Ethernet based PC for system configuration
Setting up the DCS-930 for Use Behind a Router
Installing a DCS-930 Network Camera on your network is an easy 4–step procedure:
1. Assign a Local IP Address to Your Network Camera
2. View the Network Camera Using Your Internet Explorer Web Browser
3. Access the Router with Your Web Browser
4. Open Virtual Server Ports to Enable Remote Image Viewing
This section is designed to walk you through the setup process for installing your camera behind a router and enable remote video viewing. For
the basic setup of the DCS-930, follow the steps outlined in the Quick Installation Guide.
After you have completed the setup of the DCS-930 outlined in the Quick Installation Guide you will have an operating camera that has an assigned
IP Address. Because you are using a router to share the Internet with one or more PCs, the IP Address assigned to the Network Camera will be
a local IP Address. This allows viewing within your Local Area Network (LAN) until the router is configured to allow remote viewing of the camera
over the Internet.
D-Link DCS-930 User Manual
42
Section 4 - Security
1. Assign a Local IP Address to Your Camera
Run the setup wizard from the CD included with the DCS-930. Follow the steps in the Quick Installation Guide to configure the DCS-930.
The camera will be assigned a local IP Address that allows it to be recognized by the router. Write down this IP Address for future reference.
D-Link DCS-930 User Manual
43
Section 4 - Security
2. View the Network Camera Using Your Internet Explorer Web Browser
Run your Internet Explorer Web browser. In the address bar, type in the IP Address that was assigned to the Network Camera by the DCC
program. The DCS-930 Live Video Page appears with a window displaying live video from the camera. You are able to view this screen
from any PC running Internet Explorer on your LAN.
Click on the Setup button on the left side of the display. Scroll to the bottom of the Network Setup page (see page 18) to display the ports
used by HTTP and Streaming audio and video.
D-Link DCS-930 User Manual
44
Section 4 - Security
The Setup > Network Setup page displays the port settings for your camera. If necessary, these ports can be changed if they are already
in use by other devices (e.g. in a multiple camera environment).
Note: Both the HTTP port and RTSP port are required to be
opened for the DCS-930.
D-Link DCS-930 User Manual
45
Section 4 - Security
Router Set-Up and Installation
The following steps generally apply to any router that you have on your network. The D-Link DIR-655 is used as an example to clarify the
configuration process. Configure the initial settings of the DIR-655 by following the steps outlined in the DIR-655 Quick Installation Guide.
3. Access the Router with Your Web Browser
If you have cable or DSL Internet service, you will most likely have a dynamically
assigned WAN IP Address. ‘Dynamic’ means that your router’s WAN IP address
can change from time to time depending on your ISP. A dynamic WAN IP Address
identifies your router on the public network and allows it to access the Internet. To
find out what your router’s WAN IP Address is, go to the Status menu on your router
and locate the WAN information for your router (as shown on the next page). The
WAN IP Address will be listed. This will be the address that you will need to type in
your Web browser to view your camera over the Internet.
Your WAN IP Address will be listed on the router’s
Status > Device Info page.
D-Link DCS-930 User Manual
46
Section 4 - Security
Note: Because a dynamic WAN IP can change from time to time depending on your ISP, you may want to obtain a Static IP address from
your ISP. A Static IP address is a fixed IP address that will not change over time and will be more convenient for you to use to access your
camera from a remote location. The Static IP Address will also allow you to access your camera attached to your router over the Internet.
4. Open Virtual Server Ports to Enable Remote Image Viewing
The firewall security features built into the DIR-655 router prevent users from accessing the video from the DCS-930 over the Internet. The
router connects to the Internet over a series of numbered ports. The ports normally used by the DCS-930 are blocked from access over
the Internet. Therefore, these ports need to be made accessible over the Internet. This is accomplished using the Virtual Server function
on the DIR-655 router. The Virtual Server ports used by the camera must be opened through the router for remote access to your camera.
Virtual Server is accessed by clicking on the Advanced tab of the router screen.
Follow these steps to configure your router’s Virtual Server settings:
1. Click Enabled.
2. Enter a different name for each entry.
3. Enter your camera’s local IP Address (e.g., 192.168.0.120) in the Private IP field.
4. Select TCP for HTTP port, both (TCP and UDP) for RTSP and both (TCP and UDP) for 5556 - 5559 ports.
5. If you are using the default camera port settings, enter 80 into the Public and Private Port section, click Apply.
6. Scheduling should be set to Always so that the camera images can be accessed at any time.
D-Link DCS-930 User Manual
47
Section 4 - Security
Repeat the above steps adding the port 554 to both the Public and Private Port sections. A check mark appearing before the entry name
will indicate that the ports are enabled.
Important: Some ISPs block access to port 80 and other commonly used Internet ports to conserve bandwidth. Check with your ISP so
that you can open the appropriate ports accordingly. If your ISP does not pass traffic on port 80, you will need to change the port the
camera uses from 80 to something else, such as 800. Not all routers are the same, so refer to your user manual for specific instructions
on how to open ports.
Enter valid ports in the Virtual Server section of your router. Please make sure to check the box next to the camera name on the Virtual
Server List to enable your settings.
D-Link DCS-930 User Manual
48
Appendix A - Wireless Basics
Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless* connectivity within
your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products
will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless
networking delivers.
A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires.
Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities.
Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the
absence of cabling and other fixed infrastructure have proven to be beneficial for many users.
Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers,
printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link.
D-Link DCS-930 User Manual
49
Appendix A - Wireless Basics
What is Wireless?
Wireless or WiFi technology is another way of connecting your computer to the network without using wires. WiFi uses radio frequency to
connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network.
Why D-Link Wireless?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the
performance you need at a price you can afford. D-Link has all the products you need to build your network.
How does wireless work?
Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless
technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to
connect your computer. There are two different types of wireless networks Wireless Local Area Network (WLAN), and Wireless Personal
Area Network (WPAN).
Wireless Local Area Network (WLAN)
In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small
antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point as seen in the picture,
the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing
plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues.
D-Link DCS-930 User Manual
50
Appendix A - Wireless Basics
Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link
has a wireless solution for it.
Home
• Gives everyone at home broadband access
• Surf the Web, check email, instant message, and etc
• Gets rid of the cables around the house
• Simple and easy to use
Small Office and Home Office
• Stay on top of everything at home as you would at office
• Remotely access your office network from home
• Share Internet connection and printer with multiple computers
• No need to dedicate office space
D-Link DCS-930 User Manual
51
Appendix A - Wireless Basics
Where is wireless used?
Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s becoming so popular
that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually
called “hotspots”.
Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports,
Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.
Wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing where to start. That’s why
we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.
Tips
Here are a few things to keep in mind, when you install a wireless network.
Centralize your router or Access Point
Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/
access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may
need a repeater to boost the signal to extend the range.
Eliminate Interference
Place home appliances such as cordless telephones, microwaves, and televisions as away as possible from the router/access point. This
would significantly reduce any interfere that the appliances might cause since they operate on same frequency.
Security
Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or
WEP security feature on the router. Refer to product manual for detail information on how to set it up.
D-Link DCS-930 User Manual
52
Appendix A - Wireless Basics
Wireless Modes
There are basically two modes of networking:
• Infrastructure – All wireless clients will connect to an access point or wireless router.
• Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as
two or more DCS-930 wireless network Cardbus adapters.
An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or
access point.
An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to
communicate.
D-Link DCS-930 User Manual
53
Appendix B - Networking Basics
Networking Basics
Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e.
wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK.
At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and the default
gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation,
security settings, and the settings on your router. Some
firewall software programs may block a DHCP request on
newly installed adapters.
If you are connecting to a wireless network at a hotspot (e.g.
hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings.
D-Link DCS-930 User Manual
54
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows® Vista - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.
Windows XP - Click on Start > Control Panel > Network Connections.
Step 2
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your
network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X
is a number between 2 and 99. Make sure that the number you choose is not in use on the network.
Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS
is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DCS-930 User Manual
55
Section 5 - Troubleshooting
Troubleshooting
1. Why does the LED not light up?
The power supply might be faulty. Confirm that you are using the provided DC 5V power supply for this network camera. Verify that the
power supply is correctly connected. If the camera is functioning normally, the LED may have been disabled. See page 30 for information
about how to enable the LED.
2. Why is the camera’s network connection unreliable?
There might be a problem with the network cable. To confirm that the cables are working, PING the address of a known device on the
network. If the cabling is OK and your network is reachable, you should receive a reply similar to the following (…bytes = 32 time = 2 ms).
Another possible problem may be that the network device such as a hub or switch utilized by the Network Camera is not functioning
properly. Please confirm the power for the devices are well connected and functioning properly.
3. Why does the Network Camera work locally but not remotely?
This might be caused by the firewall protection. Check the Internet firewall with your system administrator. The firewall may need to have
some settings changed in order for the Network Camera to be accessible outside your local LAN. For more information, please refer to
the section about installing your camera behind a router.
Make sure that the Network Camera isn’t conflicting with any Web server you may have running on your network.
The default router setting might be a possible reason. Check that the configuration of the router settings allow the Network Camera to be
accessed outside your local LAN.
4. Why does a series of broad vertical white lines appear through out the image?
It could be that the CMOS sensor (a square panel situated behind the lens that measures the light signals and changes it into a digital
format so your computer can present it into an image that you are familiar with) has become overloaded when it has been exposed to
bright lights such as direct exposure to sunlight or halogen lights. Reposition the Network Camera into a more shaded area immediately
as prolonged exposure to bright lights will damage the CMOS sensor.
D-Link DCS-930 User Manual
56
Section 5 - Troubleshooting
5. The camera is producing noisy images. How can I solve the problem?
The video images might be noisy if the Network Camera is used in a very low light environment.
6. The images are poor quality, how can I improve the image quality?
Make sure that your computer’s display properties are set to at least 6-bit color. Using 16 or 256 colors on your computer will produce
dithering artifacts in the image, making the image look as if it is of poor quality.
The configuration on the Network Camera image display is incorrect. The Web Configuration Video section of the Web management allows
you to adjust the related-parameters for improved images such as: brightness, contrast, hue and light frequency. Please refer to the Web
Configuration section for detailed information.
7. Why are no images available through the Web browser?
ActiveX might be disabled. If you are viewing the images from Internet Explorer make sure ActiveX has been enabled in the Internet Options
menu. You may also need to change the security settings on your browser to allow the ActiveX plug-in to be installed.
If you are using Internet Explorer with a version number lower than 6, then you will need to upgrade your Web browser software in order
to view the streaming video transmitted by the Network Camera.
D-Link DCS-930 User Manual
57
Appendix C - Technical Specifications
Technical Specifications
SYSTEM REQUIREMENTS
• Operating System: Microsoft Windows XP, Vista, Windows 7
• Internet Explorer 6 or above , Firefox 3.5 or above, Safari 4
Networking Protocol
• IPV4, ARP, TCP, UDP, ICMP
• DHCP Client
• NTP Client (D-Link)
• DNS Client
• DDNS Client (Dyndns and D-Link)
• SMTP Client
• FTP Client
WIRELESS TRANSMIT OUTPUT POWER
• 16 dbm for 11b, 12 dbm for 11g,
12 dbm for 11n (typical)
SDRAM
• 32 MB
FLASH MEMORY
• 4 MB
RESET BUTTON
• Reset to factory default
VIDEO Codecs
• HTTP Server
• MJPEG
• PPPoE
• JPEG for still images
• UPnP Port Forwarding
• LLTD
• UPnP-X1
BUILT-IN NETWORK INTERFACE
• 10/100BASE-TX Fast Ethernet
• 802.11b/g/n WLAN
WIRELESS CONNECTIVITY
• 802.11b/g/n Wireless with WEP/WPA/WPA2 security
D-Link DCS-930 User Manual
VIDEO FEATURES
• Adjustable image size and quality
• Time stamp and text overlay
• Flip and Mirror
RESOLUTION
• 640 x 480 at up to 20 fps
• 320 x 240 at up to 30 fps
• 160 x 120 at up to 30 fps
58
Appendix C - Technical Specifications
LENS
• Focal length: 5.01 mm, F2.8
SENSOR
• VGA 1/5 inch CMOS Sensor
Minimum Illumination
• 1 lux @ F2.8
View Angle
• Horizontal: 45.3°
• Vertical: 34.5°
• Diagonal: 54.9°
DIGITAL ZOOM
• Up to 4x
3A CONTROL
• AGC (Auto Gain Control)
• AWB (Auto White Balance)
• AES (Auto Electronic Shutter)
Power
• Input: 100-240 V AC, 50/60 Hz
• Output: 5 V DC, 1.2 A
• External AC-to-DC switching power adapter
D-Link DCS-930 User Manual
DIMENSIONS (W x D x H)
• Including the bracket and stand:
65.8 x 65 x 126 mm
• Camera only:
27.2 x 60 x 96 mm
WEIGHT
• 76.9 g (without bracket and stand)
MAX POWER CONSUMPTION
• 2W
Operation Temperature
• 0 ˚C to 40 ˚C (32 ˚F to 104 ˚F)
Storage Temperature
• -20 ˚C to 70 ˚C (-4 ˚F to 158 ˚F)
Humidity
• 20-80% RH non-condensing
Emission (EMI), Safety & Other Certifications
• FCC Class B
• IC
• C-Tick
• CE
59
FCC Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
CAUTION: Change or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions
and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and installers must be
provide with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance."
Canada Notices
Industry Canada regulatory information
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
The user is cautioned that this device should be used only as specified within this
manual to meet RF exposure requirements. Use of this device in a manner
inconsistent with this manual could lead to excessive RF exposure conditions.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2010:05:07 16:07:48+08:00
Creator                         : Adobe InDesign CS4 (6.0.5)
Modify Date                     : 2010:08:20 14:07:58+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2010:08:20 14:07:58+08:00
Creator Tool                    : Adobe InDesign CS4 (6.0.5)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 6531 bytes, use -b option to extract)
Instance ID                     : uuid:e1c9c0b0-047e-4405-9411-05ee9192ba9b
Document ID                     : adobe:docid:indd:fa22909a-2b91-11df-9a03-97dd5d8da2be
Original Document ID            : adobe:docid:indd:fa22909a-2b91-11df-9a03-97dd5d8da2be
Rendition Class                 : proof:pdf
Derived From Instance ID        : 9936b89b-2587-11df-8ddb-e67190181eb9
Derived From Document ID        : adobe:docid:indd:012ef19e-2222-11df-8bf9-8f9636502fcc
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:74C371DDE03ADF1196A7B91D50031723, xmp.iid:75C371DDE03ADF1196A7B91D50031723, xmp.iid:6E889C189D52DF119D38EFDEF3EE1135, xmp.iid:6F889C189D52DF119D38EFDEF3EE1135, xmp.iid:70889C189D52DF119D38EFDEF3EE1135, xmp.iid:8CABBC904553DF119D38EFDEF3EE1135, xmp.iid:8DABBC904553DF119D38EFDEF3EE1135, xmp.iid:8EABBC904553DF119D38EFDEF3EE1135, xmp.iid:E6E8A4E36253DF119F8C93A0CFB03DC6, xmp.iid:E7E8A4E36253DF119F8C93A0CFB03DC6, xmp.iid:F3E65597FD53DF119F8C93A0CFB03DC6, xmp.iid:F4E65597FD53DF119F8C93A0CFB03DC6, xmp.iid:F5E65597FD53DF119F8C93A0CFB03DC6, xmp.iid:8F71A8A93E54DF119F8C93A0CFB03DC6, xmp.iid:9071A8A93E54DF119F8C93A0CFB03DC6, xmp.iid:9171A8A93E54DF119F8C93A0CFB03DC6, xmp.iid:9271A8A93E54DF119F8C93A0CFB03DC6, xmp.iid:9371A8A93E54DF119F8C93A0CFB03DC6, xmp.iid:9471A8A93E54DF119F8C93A0CFB03DC6, xmp.iid:9571A8A93E54DF119F8C93A0CFB03DC6, xmp.iid:9671A8A93E54DF119F8C93A0CFB03DC6, xmp.iid:A56677BB5756DF11BBBBB81A65670086, xmp.iid:A66677BB5756DF11BBBBB81A65670086, xmp.iid:A76677BB5756DF11BBBBB81A65670086, xmp.iid:A86677BB5756DF11BBBBB81A65670086, xmp.iid:A96677BB5756DF11BBBBB81A65670086, xmp.iid:AA6677BB5756DF11BBBBB81A65670086, xmp.iid:797DF4788A56DF11874BCA1C337DE0F3, xmp.iid:7A7DF4788A56DF11874BCA1C337DE0F3, xmp.iid:7B7DF4788A56DF11874BCA1C337DE0F3, xmp.iid:D49051289656DF1199E0E76909A04249, xmp.iid:D79051289656DF1199E0E76909A04249, xmp.iid:D89051289656DF1199E0E76909A04249, xmp.iid:D99051289656DF1199E0E76909A04249, xmp.iid:240AD45E4857DF1199E0E76909A04249, xmp.iid:250AD45E4857DF1199E0E76909A04249, xmp.iid:260AD45E4857DF1199E0E76909A04249, xmp.iid:270AD45E4857DF1199E0E76909A04249, xmp.iid:E8F83E2C5A57DF1199E0E76909A04249, xmp.iid:43FCCED3ED57DF118E19B012916283EA, xmp.iid:44FCCED3ED57DF118E19B012916283EA, xmp.iid:45FCCED3ED57DF118E19B012916283EA, xmp.iid:46FCCED3ED57DF118E19B012916283EA, xmp.iid:47FCCED3ED57DF118E19B012916283EA, xmp.iid:48FCCED3ED57DF118E19B012916283EA, xmp.iid:49FCCED3ED57DF118E19B012916283EA, xmp.iid:4BFCCED3ED57DF118E19B012916283EA, xmp.iid:4CFCCED3ED57DF118E19B012916283EA, xmp.iid:A400D5572358DF118E19B012916283EA, xmp.iid:A500D5572358DF118E19B012916283EA, xmp.iid:A600D5572358DF118E19B012916283EA, xmp.iid:AC00D5572358DF118E19B012916283EA, xmp.iid:4AE1CB28DA58DF11A9029229FB0C0CA2, xmp.iid:0E43902DE158DF11926EB6A04CAAA221, xmp.iid:0F43902DE158DF11926EB6A04CAAA221, xmp.iid:1043902DE158DF11926EB6A04CAAA221, xmp.iid:1143902DE158DF11926EB6A04CAAA221, xmp.iid:1243902DE158DF11926EB6A04CAAA221, xmp.iid:1543902DE158DF11926EB6A04CAAA221, xmp.iid:1643902DE158DF11926EB6A04CAAA221, xmp.iid:F7469507F458DF11926EB6A04CAAA221, xmp.iid:F8469507F458DF11926EB6A04CAAA221, xmp.iid:F9469507F458DF11926EB6A04CAAA221, xmp.iid:FA469507F458DF11926EB6A04CAAA221, xmp.iid:FB469507F458DF11926EB6A04CAAA221, xmp.iid:FC469507F458DF11926EB6A04CAAA221, xmp.iid:F069CCE0AD59DF11A4BAD1590BF1B35D, xmp.iid:F169CCE0AD59DF11A4BAD1590BF1B35D, xmp.iid:F269CCE0AD59DF11A4BAD1590BF1B35D, xmp.iid:F369CCE0AD59DF11A4BAD1590BF1B35D, xmp.iid:F469CCE0AD59DF11A4BAD1590BF1B35D
History When                    : 2010:03:29 11:12:10+08:00, 2010:03:29 11:12:10+08:00, 2010:04:29 12:08:39+08:00, 2010:04:29 12:09:58+08:00, 2010:04:29 12:12:47+08:00, 2010:04:29 12:13:29+08:00, 2010:04:29 12:13:57+08:00, 2010:04:29 12:14:28+08:00, 2010:04:29 18:31:24+08:00, 2010:04:29 19:08:38+08:00, 2010:04:30 17:49:02+08:00, 2010:04:30 17:50:19+08:00, 2010:04:30 17:51:05+08:00, 2010:04:30 17:56:35+08:00, 2010:04:30 18:00:33+08:00, 2010:04:30 18:03:39+08:00, 2010:04:30 18:05:15+08:00, 2010:04:30 18:14:06+08:00, 2010:04:30 18:15:44+08:00, 2010:04:30 18:33:24+08:00, 2010:04:30 18:36:39+08:00, 2010:05:03 10:01:05+08:00, 2010:05:03 10:44:49+08:00, 2010:05:03 11:42:02+08:00, 2010:05:03 13:19:14+08:00, 2010:05:03 14:03:50+08:00, 2010:05:03 15:32:57+08:00, 2010:05:03 16:04:17+08:00, 2010:05:03 16:13:34+08:00, 2010:05:03 16:20:58+08:00, 2010:05:03 18:29:47+08:00, 2010:05:04 11:23:25+08:00, 2010:05:04 11:23:33+08:00, 2010:05:04 12:16:26+08:00, 2010:05:04 16:04:27+08:00, 2010:05:04 16:06:40+08:00, 2010:05:04 16:20:43+08:00, 2010:05:04 16:23:49+08:00, 2010:05:04 18:20:01+08:00, 2010:05:05 10:28:01+08:00, 2010:05:05 13:55:59+08:00, 2010:05:05 14:49:07+08:00, 2010:05:05 14:49:23+08:00, 2010:05:05 15:08:42+08:00, 2010:05:05 15:12:51+08:00, 2010:05:05 15:34:38+08:00, 2010:05:05 16:29:46+08:00, 2010:05:05 16:38:26+08:00, 2010:05:05 16:51:06+08:00, 2010:05:05 17:01:39+08:00, 2010:05:05 17:09:01+08:00, 2010:05:05 18:37:51+08:00, 2010:05:06 14:39:45+08:00, 2010:05:06 15:29:59+08:00, 2010:05:06 15:52:30+08:00, 2010:05:06 16:11:50+08:00, 2010:05:06 16:46:34+08:00, 2010:05:06 17:05:58+08:00, 2010:05:06 17:32:50+08:00, 2010:05:06 17:34:17+08:00, 2010:05:06 17:44:56+08:00, 2010:05:06 17:45:45+08:00, 2010:05:06 17:48:18+08:00, 2010:05:06 17:52:42+08:00, 2010:05:06 17:59:34+08:00, 2010:05:06 18:11:06+08:00, 2010:05:07 15:55:18+08:00, 2010:05:07 15:56:29+08:00, 2010:05:07 16:02:08+08:00, 2010:05:07 16:05:47+08:00, 2010:05:07 16:07:32+08:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 180.00, 300.00, 300.00, 72.00, 72.00
Manifest Placed Y Resolution    : 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 180.00, 300.00, 300.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:BA087F1A7A25DE11BC8F86500EE718D0, uuid:FC49D28FFF50DF11B4B184200BB01F40, uuid:FC49D28FFF50DF11B4B184200BB01F40, uuid:FC49D28FFF50DF11B4B184200BB01F40, xmp.iid:6F86FB751F4DDF118862DC41DF85A37A, xmp.iid:6F86FB751F4DDF118862DC41DF85A37A, uuid:0515BCD75956DF11AD688D4E5B31755D, xmp.iid:6F86FB751F4DDF118862DC41DF85A37A, uuid:F1361DCB5B56DF11AD688D4E5B31755D, uuid:F9361DCB5B56DF11AD688D4E5B31755D, xmp.iid:6F86FB751F4DDF118862DC41DF85A37A, uuid:CC3542CCF657DF11A5A0B429F8847447, uuid:5baa3ab9-f546-11d9-80f7-b1c380115801
Manifest Reference Document ID  : uuid:B9087F1A7A25DE11BC8F86500EE718D0, xmp.did:6385FB57344DDF11A72BB8953EA0A38F, xmp.did:6385FB57344DDF11A72BB8953EA0A38F, xmp.did:6385FB57344DDF11A72BB8953EA0A38F, xmp.did:6686FB751F4DDF118862DC41DF85A37A, xmp.did:6686FB751F4DDF118862DC41DF85A37A, uuid:0415BCD75956DF11AD688D4E5B31755D, xmp.did:6686FB751F4DDF118862DC41DF85A37A, uuid:D6BAAAEA5A56DF11AD688D4E5B31755D, uuid:F5361DCB5B56DF11AD688D4E5B31755D, xmp.did:6686FB751F4DDF118862DC41DF85A37A, uuid:CB3542CCF657DF11A5A0B429F8847447, adobe:docid:photoshop:3d378fe2-f545-11d9-80f7-b1c380115801
Doc Change Count                : 4665
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Count                      : 61
EXIF Metadata provided by EXIF.tools
FCC ID Filing: KA2CS930LA1

Navigation menu