D Link DI-624 Wireless 2.4GHz mini-PCI Mobile Module User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	294909
Application ID	JP5srDO40xhapWeD2VYqpQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	248.89kB (3111144 bits)
Date Submitted	2003-01-10 00:00:00
Date Available	2003-01-10 00:00:00
Creation Date	2003-01-10 16:22:58
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-01-10 16:25:25
Document Title	Microsoft Word - 930109 GL2454MP-0I User Manual.doc
Document Creator	ADOBEPS4.DRV Version 4.50
Document Author:	demi

GL2454MP-0I MiniPCI Wireless Adapter
Date of Issue: Jan. 16th, 2002
Technical Support
The firmware version of the GL2454MP-0I MiniPCI Wireless Adapter is displayed on the
utility About window. Users could download and upgrade the most recent software
version from the supplier’s web site or refer to the selling contact for the latest software
information. If you have difficulty resolving the problem while installing or using the
GL2454MP-0I MiniPCI Wireless Adapter, please contact the supplier for support.
About This Manual
GL2454MP-0I MiniPCI Wireless Adapter User’s Manual is first published on January,
2003. The manual includes procedures for the setup of the GL2454MP-0I MiniPCI
Wireless Adapter under Windows XP, Windows 2000, Windows NT, Windows 98SE or
Windows ME. Take a moment to read through this manual and familiarize yourself with
wireless technology.
Table of Contents
Chapter 1 About MiniPCI Wireless Adapter ......................................1
1-1 Features and Benefits................................................................................... 1
1-2 Applications.................................................................................................. 2
1-3 Product Kit ................................................................................................... 3
1-4 About MiniPCI Wireless Adapter LED Indicators ...................................... 3
Chpater 2 Getting Started .....................................................................3
2-1 Before Installation........................................................................................ 4
2-2 Insert the GL2454MP-0I MiniPCI Wireless Adapter .................................. 4
Chapter 3 Install Driver for Windows .................................................5
3-1 Set up MiniPCI Wireless Adapter for Windows XP ..................................... 5
3-2 Set up MiniPCI Wireless Adapter for Windows 2000................................ 10
3-3 Set up MiniPCI Wireless Adapter for Windows NT錯誤! 尚未定義書籤。
3-4 Set up MiniPCI Wireless Adapter for Windows 98SE/ ME ....................... 13
Chpater 4 Configure the MiniPCI Wireless Adapter .......................19
4-1 Install the WLAN Utility ............................................................................. 19
4-2 Use the WLAN Utility ................................................................................. 21
Limited Warranty ................................................................................31
About MiniPCI Wireless Adapter
The 802.11g MiniPCI Wireless Adapter is a standard PCI Card that fits into any standard PCI
slot in a desktop computer. Moreover, the GL2454MP-0I MiniPCI Wireless Adapter provides a
solution to connect the desktop computer to a wireless network for the desktop user. Its 54Mbps
data rate gives equivalent Ethernet speed to access corporate network or the Internet in a
wireless environment. In addition, a detachable antenna version is specifically designed for
system integrator application. When installed, GL2454MP-0I MiniPCI Wireless Adapter is
able to communicate with any 802.11g compliant products.
1-1 Features and Benefits
1.
Supports 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48 and 54 Mbps data rate.
2.
Working range up to 800 ft. in an open environment.
3.
Seamless connectivity to wired Ethernet and PC network LAN’s augments existing
networks quickly and easily.
4.
Greater flexibility to locate or move networked PCs.
5.
Wireless connection without the cost of cabling.
6.
Easy to install and user friendly, just Plug and Play.
7.
Supports a variety of operating systems (Win98SE/ME/2000/XP)
8.
64-bit and 128-bits WEP encryption capable.
9.
Provides Window-based Diagnostic Tools, most notably, Site Survey, Link Quality Test
and Access Point Browser.
-1-
1-2 Applications
GL2454MP-0I MiniPCI Wireless Adapter offers a fast, reliable, cost-effective solution for
wireless client access to the network in applications like these:
1.
Remote access to corporate network information
E-mail, file transfer and terminal emulation.
2.
Difficult-to-wire environments
Historical or old buildings, asbestos installations, and open area where wiring is difficult
to deploy.
3.
Frequently changing environments
Retailers, manufacturers and those who frequently rearrange the workplace and change
location.
4.
Temporary LANs for special projects or peak time
- Trade shows, exhibitions and construction sites where a temporary network will be
practical.
- Retailers, airline and shipping companies need additional workstations during peak
period.
- Auditors requiring workgroups at customer sites.
5.
Access to database for mobile workers
Doctors, nurses, retailers, accessing their database while being mobile in the hospital,
retail store or office campus.
6.
SOHO (Small Office and Home Office) users
SOHO users need easy and quick installation of a small computer network.
7.
High security connection
The secure wireless network can be installed quickly and provide flexibility.
-2-
1-3 Product Kit
GL2454MP-0I MiniPCI Wireless Adapter comes with the following items. Please go through
each item below. If any of listed items appears to be damaged or missing, please contact your
local dealer.
GL2454MP-0I MiniPCI Wireless Adapter
GL2454MP-0I MiniPCI Wireless Adapter…..………….…………………….….…..
11Mbps PCI Card Software and Product CD.…………………………..…...
GL2454MP-0I MiniPCI Wireless Adapter User Manual…...…..…………………..…
x1
1-4 About Wireless LAN PC Card LED Indicators
The GL2454MP-0I MiniPCI Wireless Adapter has a LED indicator.
indicators is described as below:
The behavior of the
Link LED
„ Solid Green – Associated with the Access Point or Ad-Hoc wireless workstation.
„ Blinking Green – Not connecting to the Access Point or Ad-Hoc wireless workstation.
LINK
-3-
2
Getting Started
This chapter describes the instructions that guide you through the proper installation of your
GL2454MP-0I MiniPCI Wireless Adapter for the Windows XP/2000/98SE/ME operating
systems.
The complete installation of the GL2454MP-0I MiniPCI Wireless Adapter consists of the
following steps:
STEP 1: Insert the PCI adapter into the PCI slot
STEP 2: Install the corresponding driver and utility.
STEP 3: Set basic settings.
STEP 4: Finish Installation.
2-1 Before Installation
In addition to the items shipped with the client adapter, you will also need the following in order
to install the adapter:
1.
A computer equipped with a PCI slot.
2.
Windows XP/2000/98SE/ME (with a Windows installation CD-ROM for use during
installation)
3.
Minimum 5 Mbytes free disk space for installing driver and utility program.
2-2 Insert the GL2454MP-0I MiniPCI Wireless Adapter
To install the GL2454MP-0I MiniPCI Wireless Adapter, please do the following:
1.
2.
Find an available PCI slot on your computer.
Insert the PCI Adapter into the PCI slot.
-4-
Install Driver for Windows
This section describes the installation of the GL2454MP-0I MiniPCI Wireless Adapter driver
for the Windows 98SE/ME/2000 and Windows XP operating systems. The installation
procedures for Windows XP refer to 3-1 Set up MiniPCI Wireless Adapter for Windows XP;
for Windows 2000 please see 3-2 Set up MiniPCI Wireless Adapter for Windows 2000; for
Windows 98SE/ME refer to 3-3 Set up MiniPCI Wireless Adapter for Windows 98SE/ME.
Note: Before you start the installation, you are advised to keep the Windows CDROM in case you might need certain system files.
3-1 Set up MiniPCI Wireless Adapter for Windows XP
Step 1: Insert the GL2454MP-0I MiniPCI Wireless Adapter into the PCI slot on your desktop
and start Windows. Windows will auto-detect the MiniPCI Wireless Adapter and a “Found
New Hardware Wizard” window will show up. Select “Install from a list or specific location
(Advanced)” to install the driver.
-5-
Step 2: Insert the Product CD-ROM into the CD-ROM drive. Specify the location where the
driver is placed. Click on Next to install the driver.
Step 3: The windows will find “MiniPCI Wireless Adapter” and start copying
corresponding files into the system. Click on Next to continue.
-6-
Step 4: Click Finish to complete the installation.
Step 5: Right click “My Computer” from Start, select Properties, go to the Hardware tab
and click the Device Manager button to see if any error icon appears next to the Network
adapters/MiniPCI Wireless Adapter. If no, your MiniPCI Wireless Adapter is working well.
Check if there is any error
icon next to the MiniPCI
Wireless Adapter
-7-
After installing the MiniPCI Wireless Adapter, the Windows XP will display a “Wireless
Network Connection # ” message.
Click on the message and the “Automatic Wireless Network Configuration” will then appear
automatically and allow users to connect to an available wireless infrastructure network (Access
Point), shown as follows. You may click the Advanced button to make advanced configuration
for the MiniPCI Wireless Adapter, shown as below.
-8-
For more information on using the automatic wireless network configuration please refer to
Windows XP Help file.
If you desire to use our WLAN
Utility, you need to disable the
Windows XP Automatic
Wireless Network Configuration
first by un-checking this check
However, the WLAN Utility, which comes with the MiniPCI Wireless Adapter, provides you
more tools to configure the MiniPCI Wireless Adapter and monitor the wireless connection.
For more information on installing and using the WLAN Utility, please refer to the following
sections “Install the WLAN Utility” and “Use the WLAN Utility”.
Note: To use the WLAN utility under Windows XP, you need to disable the
Automatic Wireless Network Configuration first. Steps are described as
follows:
„ Right click the Network Connections icon. Select Properties.
„ Go to the Wireless Networks tab.
„ Uncheck the “Use Windows to configure my wireless network settings”
check box and click the OK button (see the above picture).
-9-
3-2 Set up MiniPCI Wireless Adapter for Windows 2000
Step 1: Insert the GL2454MP-0I MiniPCI Wireless Adapter into the PCI slot on your desktop
and start Windows. Windows will auto-detect the MiniPCI Wireless Adapter.
Step 2: A “Found New Hardware Wizard” window shows up. Click Next to proceed.
-10-
Step 3: Select “Search for a suitable driver for my device (recommended)”.
Step 4: Insert the Product CD-ROM into the CD-ROM drive. Specify the location where the
driver is placed. Click on Next to install the driver.
-11-
Step 5: The windows will find “Network Controller”. Click on Next to continue.
Step 6: Click Finish to complete the installation.
-12-
Step 7: Open Control Panel/System/Device Manager, and check Network Adapters to see
if any error icon appears.
well.
If no, your GL2454MP-0I MiniPCI Wireless Adapter is working
Check if there is any
error icon next to the
MiniPCI Wireless Adapter
3-3 Set up Wireless LAN PC Card for Windows 98SE/ ME
Step 1: Insert the GL2454MP-0I MiniPCI Wireless Adapter into the PCI slot on your desktop
and start Windows. Windows will auto-detect new hardware and will display an “Add New
Hardware Wizard” window. Click Next to continue.
-13-
Step 2: Select “Search for the best driver for your device (Recommended)” and click
Next.
Step 3: Insert the Product CD-ROM into the CD-ROM drive. Select the “CD-ROM drive”
check box and click on Next to install the driver.
-14-
Step 4: The Windows will find “MiniPCI Wireless Adapter”. Click Next to continue.
Step 5: Once the [Please insert the disk labeled ‘Windows 98 Second Edition CD-ROM/ME
CD-ROM”, and then click OK] window appears, inset enter the path corresponding to the
appropriate drives and click OK. Usually these files can be found at C:Windows or
-15-
C:Windows\system.
-16-
Step 6: Click Finish to complete the software installation.
Step 7: Restart the computer.
-17-
Step 8: Open Control Panel/System/Device Manager, and check Network Adapters to see
if any error icon appears next to the MiniPCI Wireless Adapter.
MiniPCI Wireless Adapter is working well.
If no, your GL2454MP-0I
Check if there is any error
icon next to the MiniPCI
Wireless Adapter
-18-
Configure the Wireless LAN PC Card
This chapter gives you assistance with detailed configuration for the GL2454MP-0I MiniPCI
Wireless Adapter under Windows XP/2000/NT/98SE/ME.
4-1 Install the WLAN Utility
To install the WLAN Utility, follow these steps:
Step 1: Insert the Product CD-ROM or floppy disk again.
Step 2: Go to the utility folder and run setup.exe.
Step 3: The InstallShield Wizard will show up and guide you through the rest of the setup
process.
Run the Setup
Utility
Choose Destination
Location and click
Next to continue
-19-
Select a program
folder and click
Next
You may add a
shortcut in the
startup folder as
desired
Upon completion, go to Program Files and run the WLAN Utility and its icon will appear in
the System Tray in the bottom right corner of your task bar. Clicking on the icon will open
the configuration window. When you minimize the window, the system tray icon will be
loaded in the System Tray again.
The color behind the system tray icon indicates the link status:
Blue indicates a good or excellent link.
Yellow indicates a usable but weak link.
Red indicates no or very poor link quality. When you minimize the window, the system
tray icon will be loaded in the System Tray again.
-20-
4-2 Use the WLAN Utility
The WLAN Utility enables you to make configuration changes and perform user-level
diagnostics on your GL2454MP-0I MiniPCI Wireless Adapter in the Windows
XP/2000/NT/98SE/ME operating system environments. The WLAN Utility consists of
window with 5 items for you to monitor and configure the GL2454MP-0I MiniPCI Wireless
Adapter: Configuration, Link Test, AP Browser, Site Survey and About.
Configuration:
The Configuration item allows you to modify the configuration parameters for the GL2454MP0I MiniPCI Wireless Adapter such as Profile, Network Type, Ad-Hoc Channel, Transmit
Rate, ESSID, WEP, RTS/CTS, Fragment Threshold, and Power Save mode. Furthermore,
you may monitor the current status of the MiniPCI Wireless Adapter such as State, Current
Channel, Current Tx Rate, Throughput, Link Quality and Signal Strength.
-21-
Profile
The Profile field allows you to set values for all parameters by selecting a previously defined
profile. To create the profile, go to the Profile field, type a profile name and set the
corresponding parameters.
If one of the profiles is no longer used, you may remove it by
clicking the Delete button. After changing parameters, save the profile and click the Apply
button to take effect. You can have multiple profiles and modify the profile at any time.
Alternatively, you may choose the profile by right clicking the system tray icon on the task bar,
making the configuration more friendly and efficient.
You may right click
the WLAN system
tray icon to choose
the pre-set profiles
Network Type
There are 3 network types for the GL2454MP-0I MiniPCI Wireless Adapter to operate. If you
need to access company network or Internet via Access Point, select “Infrastructure”. To set
up a group of wireless stations for file and printer sharing, select “Pseudo AdHoc” or “802.11
AdHoc” (without Access Point). If Pseudo Ad-Hoc (without access point) is selected, you
need to set wireless stations with the same channel. For 802.11 AdHoc, the same ESS ID
is required to the wireless stations.
-22-
ESSID
The ESS ID is the unique ID used by Access Points and stations to identify a wireless LAN.
Wireless clients associating to any Access Point must have the same ESSID. The default
setting is ANY, which allows your MiniPCI Wireless Adapter to automatically associate to any
Access Point (Infrastructure mode) in the vicinity of your wireless adapter. Alternatively, you
may check the ESS ID check box to specify the ESS ID. It will then attempt to associate with
Access Points or stations with the same ESS ID. The ESS ID can be set up to 32 characters
and is case sensitive.
Check here before entering the ESS ID
If there two Access Points with the same ESSID, you may check the BSS ID check box and
enter the MAC address of the Access Point you desire to connect to.
Check here before entering the BSS ID
Transmit Rate
The GL2454MP-0I MiniPCI Wireless Adapter provides various data rate options for you to
select. Data rates options include Fully Auto, 2 Mbps, 1 or 2 Mbps, 5.5 Mbps, and 11 Mbps.
In most networking scenarios, you will see that the factory-set default “Fully Auto” will prove
the most efficient. This setting will allow your GL2454MP-0I MiniPCI Wireless Adapter to
operate at the maximum data rate. When the communications quality drops below a certain
level, the PCI Card will automatically switch to a lower data rate. Transmission at lower data
speeds are usually more reliable. However, when the communications quality improves again,
the GL2454MP-0I MiniPCI Wireless Adapter will gradually increase the data rate again, until it
has reached the highest available transmit rate.
-23-
WEP
To prevent unauthorized wireless stations from accessing data transmitted over the network, the
WLAN Utility offers highly secure data encryption, known as WEP, making your data
transmission over air more secure. To activate the WEP Encryption, check the WEP Enabled
check box. An Encryption window will then appear. The instructions are as follows:
¾ Pull down the Encryption (WEP) menu and select either 64bit or 128bit encryption
method.
¾ Specify the encryption keys.
below:
There are two methods to set the WEP keys, as described
Create Encryption Keys by Using a Passphrase
To create encryption keys by using a passphrase, click the Create Key with Passphrase
check box and type a character string in the Passphrase field. As you type, the utility uses
an algorithm to generate 4 keys automatically. Select either the 64bit or 128bit encryption
first, and type a string in the Create Key with Passphrase field. Select one key from the 4
WEP keys and click OK. Then click the Apply button on the Configuration tab to make
the setting take effect.
Create Encryption Keys Using a Passphrase (128bit)
-24-
Create Encryption Keys Manually
You can also create encryption keys manually by clicking the Create Keys Manually
check box.
For 64bit encryption you may choose:
„ Alphanumeric: 5 characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (e.g.
MyKey)
„ Hexadecimal: 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (e.g.
11AA22BB33)
For 128bit encryption you may choose:
„ Alphanumeric: 13 characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
(e.g. MyKey12345678)
„ Hexadecimal: 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (e.g.
00112233445566778899AABBCC).
After entering the WEP keys in the key field, select one key as active key, click the OK
button and then click the Apply button on the Configuration tab to make the setting take
effect.
Create Encryption Keys Manually (64bit)
Note: The WEP key must be set up exactly the same on the Wireless LAN
stations as they are on the wireless Access Points. If you set “MyKey” for the
Wireless LAN PC Card, the same WEP Key “MyKey” must be assigned to the
Access Point or other stations.
-25-
Advanced
The WLAN Utility also offers the advanced configuration for user to set the GL2454MP-0I
MiniPCI Wireless Adapter under certain network environment. These advanced options
include Power Management, RTS/CTS and Fragmentation Threshold. To enable the advanced
configuration, go to the Configuration tab and click the Advance button.
Power Management
The Power Save option is designed to conserve battery life of you computer. When Power
Save is enabled, your GL2454MP-0I MiniPCI Wireless Adapter will go into sleep mode to
minimize power consumption.
Note: When power saving mode is enabled, the Access Points you use need to
support power saving as well so that the communication can be established.
RTS Threshold
RTS Threshold is a mechanism implemented to prevent the “Hidden Node” problem. “Hidden
Node” is a situation in which two stations are within range of the same Access Point, but are not
within range of each other. The following figure illustrates an example of the “Hidden Node”
problem. Both stations (STA) are within range of the Access Point, however, they cannot hear
each other. Therefore, they are hidden nodes for each other. When a station starts data
transmission with the Access Point, it might not notice that the other station is already using the
wireless medium. When these two stations send data at the same time, they might collide
when arriving simultaneously at the Access Point. The collision will most certainly result in a
loss of messages for both stations.
-26-
Thus, the RTS Threshold mechanism provides a solution to prevent data collisions. When you
enable RTS Threshold on a suspect “hidden station”, this station and its Access Point will use a
Request to Send/Clear to Send protocol (RTS/CTS). The station will send an RTS to the
Access Point, informing that it is going to transmit the data. Upon receipt, the Access Point
will respond with a CTS message to all station within its range to notify all other stations to
defer transmission. It will also confirm the requestor station that the Access Point has reserved
it for the time-frame of the requested transmission.
If the “Hidden Node” problem is an issue, please specify the packet size. The RTS mechanism
will be activated if the data size exceeds the value you set. It is highly recommended that you
set the value ranging from 0 to 1500. The default value is Disable.
Note: Enabling RTS Threshold would cause redundant network overhead that
could negatively affect the throughput performance instead of providing a remedy.
Frag. Threshold
Fragmentation mechanism is used for improving the efficiency when high traffic flows along
in the wireless network. If your GL2454MP-0I MiniPCI Wireless Adapter often transmit
large files in wireless network, you can enable the Fragmentation Threshold by clicking the
Enable button and the mechanism will split the packet. The value can be set from 256 to
1500. The default value is Disable.
IRQ NO./IO Address
To avoid device conflict, you may modify the IRQ No. and IO Address for your device (Only
available under Windows NT).
-27-
Status:
The Status field on the Configuration menu provides the following information.
State: When operating in Infrastructure mode, this field shows the MAC address of the Access
Point with which the MiniPCI Wireless Adapter is communicating. When operating in AdHoc mode, it shows the virtual MAC address used by computers participating in the Ad-Hoc
network.
Current Channel: Shows the channel on which the connection is made.
Current Tx Rate: Shows the highest transmit rate of the current association.
Throughput: Shows the short term transmit and receive throughput in bytes/second, and is
continuously updated.
Link Quality: Based on the quality of the received signal of the Access Point beacon.
are 5 states of link quality:
There
100%~80%: Excellent link.
80%~60%: Good link quality.
60%~40%: Fair link quality.
Under 40%: Poor or no connection.
Signal Strength: Based on the received signal strength measurement of the baseband processor
of the Beacon signal. Same as link quality, there are 5 states of signal strength:
100%~80%: Excellent signal strength.
80%~60%: Good signal strength.
60%~40%: Fair signal strength.
Under 40%: Poor or no signal strength.
You can click the Rescan button to force the radio to rescan all available channels. If your
link quality or signal strength is poor, rescanning can be used to push the radio off a weak
Access Point and search for a better link with another Access Point.
-28-
Link Test:
The Link Test tool helps you examine data transmission quality between your GL2454MP-0I
MiniPCI Wireless Adapter and any workstation on the network. By entering IP address of 2
remote station, setting ping interval and packet size, you may know whether communication has
been made successfully or not. Additionally, you may run the loopback test by clicking the
Look back button to verify the communication quality between your wireless station and
Access Point. The Refresh button is used for setting the counters back to 0.
AP Browser:
By clicking the Rescan button, the AP Browser can display Access Points around the working
environment. Besides showing the ESSID of each Access Point, it also displays BSSID,
Channel, Signal, Quality and Supported Rates. To join any of the displayed Access Points,
highlight the Access Point you desire to connect and then click the Join BSS (when there are
more than 2 Access Points with the same ESSID), or Join ESS button to join the group.
-29-
Site Survey:
When the Site Survey screen is displayed, the channel quality of all 14 radio channels will be
displayed. These channel quality measurements are shown on each gauge for the 14 radio
channels. The blue bar indicated the channel quality is clear and good. The higher the blue
bar is, the better quality you have (i.e., less interference). The yellow bar indicates the
channel quality is fair and the red bar indicates the channel is busy or having severe
interference.
About:
The About item shows the versions of the Wireless LAN Utility, driver, firmware of the
GL2454MP-0I MiniPCI Wireless Adapter. Also, the MAC address and frequency domain are
displayed.
-30-
Limited Warranty
This Warranty constitutes the sole and exclusive remedy of any buyer or reseller’s equipment
and the sole and exclusive liability of the supplier in connection with the products and is in lieu
of all other warranties, express, implied or statutory, including, but not limited to, any implied
warranty of merchantability of fitness for a particular use and all other obligations or liabilities
of the supplier.
In no even will the supplier or any other party or person be liable to your or anyone else for any
damages, including lost profits, lost savings or other incidental or consequential damages, or
inability to use the software provided on the software media even if the supplier or the other
party person has been advised of the possibility of such damages.
The following are special terms applicable to your hardware warranty as well as services you
may use during part of the warranty period. Your formal Warranty Statement, including the
warranty applicable to our Wireless LAN products, appears in the Quick Installation Guide
which accompanies your products.
Duration of Hardware Warranty: One Year
Replacement, Repair or Refund Procedure for Hardware:
If your unit needs a repair or replacement, return it to your dealer/distributor in its original
packaging. When returning a defective product for Warranty, always include the following
documents:
„
„
„
The Warranty Repair Card
A copy of the invoice/proof of purchase, and
The RMA Report Form (To receive a Return Materials Authorization form (RMA), please
contact the party from whom you purchased the product).
Upon proof-of-purchase we shall, at its option, repair or replace the defective item at no cost to
the buyer.
This warranty is contingent upon proper use in the application for which the products are
intended and does not cover products which have been modified without the reseller’s approval
or which have been subjected to unusual physical or electrical demands or damaged in any way.
-31-
Please complete the information below and include it along with your products.
Name:
Title:
Company:
Telephone:
Fax:
Email:
City/State/Zipcode:
Country:
Product Name:
Serial Number:
MAC Address:
Invoice Date:
Product Description:
If you have any further questions, please contact your local authorized reseller for support.
-32-
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
-33-
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna
and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required with this module installed (for example,
digital device emissions, PC peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example
certain laptop configurations or co-location with another transmitter), then the FCC
authorization is no longer considered valid and the FCC ID can not be used on the final
product. In these circumstances, the OEM integrator will be responsible for re-evaluating
the end product (including the transmitter) and obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be
installed such that 20 cm may be maintained between the antenna and users (for
example: Router, Access Point). The final end product must be labeled in a visible area
with the following: “Contains TX FCC ID: KA2DI-624”.
Manual Information That Must be Included
The users manual for OEM integrators must include the following information in a
prominent location “ IMPORTANT NOTE: To comply with FCC RF exposure
compliance requirements, the antenna used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter.
-34-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2003:01:10 16:22:58+08:00
Modify Date                     : 2003:01:10 16:25:25+08:00
Page Count                      : 37
Creation Date                   : 2003:01:10 08:22:58Z
Mod Date                        : 2003:01:10 08:22:58Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : demi
Metadata Date                   : 2003:01:10 08:22:58Z
Creator                         : demi
Title                           : Microsoft Word - 930109 GL2454MP-0I User Manual.doc

EXIF Metadata provided by EXIF.tools