D Link DIR825B1 Xtreme N DUAL BAND GIGABIT ROUTER User Manual UserMan 6 KA2DIR825B1

Download:
Mirror Download [FCC.gov]
Document ID	1029604
Application ID	C89/4L41a9BTpo14XDMFAA==
Document Description	Manual Part 4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	296.47kB (3705873 bits)
Date Submitted	2008-11-12 00:00:00
Date Available	2008-11-12 00:00:00
Creation Date	2008-11-12 18:12:34
Producing Software	PrimoPDF
Document Lastmod	2008-11-12 13:27:14
Document Title	UserMan-6_KA2DIR825B1.pdf
Document Creator	PrimoPDF http://www.primopdf.com
Document Author:	yfaziloglu

Section 3 » Configuration
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.
There are two accounts that can access the management interface through the web browser. The accounts are admin
and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot
make any changes. Only the admin account has the ability to change both admin and user account passwords.
Admin Password: Enter a new password for the Administrator Login Name.
The administrator can make changes to the settings.
User Password: Enter the new password for the User Iogin. If you Iogin as m;
the User, you can only see the settings, but cannot change m im'wfl'ml‘mammaummomawmnrm-mu mm“.
vex/hula ms in! an aunt}! taxman; wmeme user Mr may ms:
them. a. u‘u‘ mm mm.“ mm 1: showman“ on m w...
m a as w. m, w
System Name: Enter a name for the DIR-825 router. .
Enable H'ITPS Check to enable HTTPS to connect to the router mmmwmmmmmmmm"
Server: securely.
usm PAsswonn
Enable Remote Remote management allows the DIR—825 to be configured
Management: from the Internet by a web browser. A username and
password is still required to access the Web-Management
interface. In general, only a member of your network can
browse the built-in web pages to perform Administrator
mm aim we we W mm mm mm for Lnnnmmllon
tasks. This feature enables you to perform Administrator “WW" “WWW“
tasks from the remote (Internet) host. mum...”
lmunwm: I
Remote Admin Port: The port number used to access the DIR-825. ‘m ‘
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet flzffi M v ”W"
IP address ofthe DIR-825 and 8080 is the port used forthe "W
Web Management interface. If you have enabled HTTPS
Server and checked Use HTTPS, you must enter https:ll
as part of the URL to access the router remotely.
Dun-ti MIMI
Inbound Filter: This section will list any rules that are createdYou may click the Edit icon to change the settings or enable/disable the rule,
or click the Delete icon to remove the rule.
D-Link DIR—825 User Manual 56
Section 3 » Configuration
Time Settings
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system
clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also
be configured to automatically adjust the time when needed.
Time Zone: Select the Time Zone from the drop-down
menu.
Daylight Saving: To select Daylight Savingtime manually, select nm-m "m“
enabled or disabled, and entera startdate and
an end date for daylight saving time.
The me cnnflqufimn Dunn news you to configure, mm, —m man the meet me
on me ntemi| mm dndc mm the seam you an set me time zone mat yrm are n ma
setme mp (Netvmttrlre pmmmo Server. Damn mm an m be mnflgured m
zumnmw 311ml the we men needed.
Enable NTP Server: NTP is short for Network Time Protocol. l‘savesm-u —|Mmsm,
NTP synchronizes computer clock times in a
network of computers. Check this box to use a “News“: mm“ mm], m IMMM
NTP server. This will only connect to a server melee: (wmwmmeseml mm .
on the Internet, not a local server. EmbhlhfighlSm-a: f
Mlsanmgomu: ,
mung-"gum: mm Week Bayoiweeleme
Dsrsm 7: —
DSTEnd . 5; . e“.
AUTOMATIC rm; munoukAnon
(“News‘s-u:
NTP Server Used: Enter the NTP server or select one from the
drop-down menu.
Manual: To manually input the time, enter the values
in these fields for the Year, Month, Day, Hour,
t . "04 <1 tittii‘f u
Minute, and Second and then CllCK SetTIme, "mm"
You can also click copy Your Comp-Hers
Tlme Settlngs.
Dammit-net Year 2m v Mnnth Jen v any 31 7
Non K v Minulefi v semen: v w v
“0 meg
_IRELESS
D-Link DIR—825 User Manual 57
Section 3 , Configuration
SysLog
The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs
to a SysLog server on your network.
Enable Logging to Check this box to send the router logs to a
SysLog Server: SysLog Server.
SysLog Sewer IP The address of the SysLog sen/erthat will be M ' ' "ms
Address: used to send the logs. You may also select
m. m, Wm M m u me ha nfmmn m a SysLog gm.
your computerirom the drop-down menu (only mm
[Is-mm we...”
ii receiving an IP address from the router via
DHCP).
Wag-mg?
UJIRELESS
D-Link DIR—825 User Manual 58
Section 3 » Configuration
The Email feature can be used to send the system log files, router alert messages, and firmware update notification
Email Settings
to your email address.
Enable Email
Notification:
When this option is enabled, router activity logs
are e-mailed to a designated email address.
- v roots -- 4
From Email This email address will appear as the sender M
Address:
To Email Address:
SMTP Server
Address:
Enable
Authentication:
Account Name:
Password:
On Log Full:
On Schedule:
Schedule:
when you receive a log file orfirmware upgrade
notification via email.
Enter the email address where you want the
email sent.
Enterthe SMTP se rveraddressforsending email.
If your SMTP server requires authentication,
select this option.
Check this box if your SMTP sewer requires
authentication.
Enter your account for sending email.
Enter the password associated with the
account. Re-typethe password associated with
the account.
When this option is selected, logs will be sent
via email when the log is full.
Selecting this option will send the logs via email
according to schedule.
This option is enabled when On Schedule is selected.You can select a schedule from the list of defined schedules. To create
a schedule, go to Tools > Schedules.
D-Link DIR—825 User Manual
mu srrmas
m Emi fnmn an n mu to mu m "mm” rm, rout-l alm mama“, and
firmware undm nnfiflml m youremal address.
[Imam Elam
[name Emailmllzllm: 7
[HAIL strrlNr-s
mm [lnai Add-es
to [uni Addams
sum Save Add-m
sun: Suva pom
Enabh mumm- :
Amm-t mm:
m:
vmfv mom:
(”Au Loo wllm rm on. on sclitnuu
Owl lofl fill
on Will!
m:
Dehls ‘
Section 3 » Configuration
Save Settings to
Local Hard Drive:
Load Settings fmm
Looal Hard Drive:
Restore to Factory
Default Settings:
Reboot Device:
System Settings
This section allows you to manage the router’s configuration settings, reboot the router, and restore the router to the
factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that
you’ve created.
Use this option to save the current router
configuration settings to atile on the hard disk
of the computer you are using. First, click the
Save button. You will then see a file dialog,
where you can select a location and file name
for the settings.
Use this option to load previously saved
router configuration settings. First, use the
Browse control to find a previously save
file of configuration settings. Then, click the
Load button to transfer those settings to the
router.
This option will restore all configuration
settings back tothe settings that were in effect
at the time the router was shipped from the
factory. Any settings that have not been saved
will be lost, including any rules that you have
created. If you want to save the current router
configuration settings, use the Save button
above.
Click to reboot the router.
D-Link DIR—825 User Manual
the system Smgsxmm aims mu m reboot the device, or restore the malaria the
mew def-at mes lemma the unit to me renory aeeut setmgs wI erase il mos.
“mane irw rubs maven hive dated
The menswear mos fin he med as a tie meme foal hard drive. Themed fie or
my mm med meme crux-d hy am. an on upbzdofl mm m um.
svsTEM snnuos
SaveToLoGHhrdlnive mmmm
InzdFvw-ImiIh-dlh'na
Raster- Ya rm Meme Swwthflw w,“
new; all settings to the emery dehutt;
Mikhail! Mathew“
uJ ELESS
60
Section 3 » Configuration
Firmware Upgrade:
Browse:
Notifications
Options:
Update Firmware
You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of
the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support
site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the
D-Link support site.
Click on Check Now to find out if there is an
updated firmware; if so, download the new
firmware to your hard drive.
After you have downloaded the new firmware,
click Browse to locate the firmware update on
your hard drive. Click Upload to complete the
firmware upgrade.
Check Automatically Check Online for
Latest Firmware Version to have the router
check automatically to see if there is a new
firmware upgrade.
Check Email Notification of Newer Firmware
Version to have the router send an email when
there is a new firmware available.
D-Link DIR—825 User Manual
run-rm
Innis
There may be new rm.- c rm m— Dmfllstv Wave mnmnnam mu verlmrmme.
To upcflde me ‘Ilmme, hate the Honda fie on the led hard drive mm m Browse
mum, om ynu have found the rim» be used, m the ucload button Delawuz an the
firmware unmade,
5mm Dnn'ksavesem
murmur INFORMATION
cumnt F'muale Vex)": LIN)
mmt rut-m mm: zoos/061m
cmmmfwumfiuwzuwu :
mum“ upmus
mm: Sumo hunt-remand“ m m mnfinuratnn ophnns to me mow
Mauls. Mm pile-mu an “mm m m m an m. mmntmnmunmm
rm mg rags A M amen,
m upma- m- (hm-lam your Dc mm hav- a wind “1"..sz m m. mum m-
the name of the Immune unmade file, and (Itdr on m upload button.
llnhad:
[Ml
nmwmu llvnuopr ‘mrtucmmn mumps
Autumnal: one-t mine 4
lor lam run-we Vegan :
[Emu J
WIRELESS
61
Section 3 » Configuration
The DDNS feature allows you to host a server (Web, FTP, Game Server, etc...) using a domain name that you have
purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet
Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in
DDNS
your domain name to connect to your server no matter what your IP address is.
Enable Dynamic
DNS:
Sewer Address:
Host Name:
Username or Key:
Password or Key:
Timeout:
Status:
Dynamic Domain Name System is a method of
keeping a domain name linked to a changing
IP Address. Check the box to enable DDNS.
Choose your DDNS provider from the drop
down menu.
Enter the Host Name that you registered with
your DDNS service provider.
Enter the Username for your DDNS account.
Enter the Password for your DDNS account.
Enter a time (in hours).
Displays the current connection status.
D-Link DIR—825 User Manual
lu ELESS
The Dons femm ilvwsvou n- in»: a selvedww, m. sze Server, eh...) hing] damn
name matwu lave Dudmd (mmmverymmemeemm) wvth your dymm»
assumed w xii-ins. Hut hmzdnnc lnrunetsewm Panniers sewn dvnameangnD) m
mums. name a mm; mm nmder, your Trends an emev yum host namela mnnect
to your name server rn MEIMIKVWV 1» address 5.
son on for our; nee onus We at www.DanDNS.mm.
5M same; Dm‘tsavesefinj
ovmxmc ous
Enable wan-runs: :
Sui-Hula:
(e.g.: memdemmet)
Mm lane;
mull! er new.
pm or m
um mm m Kev:
mt:
sums Dsmnnea
(new)
Section 3 , Configuration
System Check
Ping Test: The Ping Test is used to send Ping packets to test if a
computer is on the Internet. Enterthe IP Address that
you wish to Ping, and click Plng.
Ping Results: The results of your ping attempts will be displayed
here.
mtg-awnings:
m wxmmaamm mk vng
D-Link DIR—825 User Manual 63
Section 3 » Configuration
Days:
Time:
Save:
Schedule Rules
List:
Schedules
Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from
3pm to 8pm, you could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and
End Time of 8pm.
Enter a name for your new schedule.
Select a day, a range of days, or All Week to
include every day.
Check All Day - 24hrs or enter a start and end
time for your schedule.
Click Save to save your schedule.You must click
Save Settings at the top for your schedules to
go into effect.
The list of schedules will be listed here. Click the
Edit icon to make changes or click the Delete
icon to remove the schedule.
D-Link DIR—825 User Manual
Viremzl mrmolfemxes.
The Schedule mnhunmn when e um m mace schedule rules for various Mmhnd
suPPoRr
Nebhll ems.
ADD SCHEDULE mus
Darts): AIWeex O selmDMs)
Sun
:Men DTue [wed Elm :
(heur.minute,121nur7fle)
_IRELESS
_CHEDULE5 "W 14h“ 7
snufme:1z ;n m v (heurhmlnute 12mm“)
Emir-m: u _n m -
scnmutg RULES usv
"in WV“) "um
64
Section 3 » Configuration
Device Information
This page displays the current information for the DIR-825. It will display the LAN, WAN (Internet), and Wireless
information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button
will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISF’.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use
Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection.
General: Displays the routers time and firmware version.
WAN: Displays the MAC address and the public IP settings forthe router.
LAN: Displays the MAC address and the private (local) IP settings for the
router.
Wireless LAN: Displays the wireless MAC address and your wireless settings such as
SSID and Channel.
LAN Computers: Displays computers and devices that are connected to the router via Ethernet
and that are receiving an IP address assigned by the router (DHCP).
D-Link DIR»825 User Manual
Section 3 » Configuration
What to View:
View Levels:
Apply Log Settings:
Relresh:
Clear:
Email Now:
Save Log:
Log
The router automatically logs (records) events of possible interest in it’s internal memory. If there isn’t enough internal
memory for all events, logs of older events are deleted but logs of the latest events are retained.The Logs option allows
you to view the router logs. You can define what types of events you want to view and the level of the events to view.
This router also has external Syslog Server support so you can send the log files to a computer on your network that
is running a Syslog utility.
You can select the types of messages that you want
to display from the log. Firewall & Security, System,
and Router Status messages can be selected.
There are three levels of message importance:
Informational, Warning, and Critical. Select the
levels that you want displayed in the log.
Will filter the log results so that only the selected
options appear.
Updates the log details on the screen so it displays
any recent activity.
Clears all of the log contents.
This option will send a copy of the router log to
the email address configured in the Tools > Email
Settings screen.
This option will save the routerto a log file on your
computer.
D-Link DIR—825 User Manual
mum—w
mum
(”wan
Meter-l routs.
than n.» has mu am um mm mm af-w-m you wanton/aw and m went mm
mm. Harman: ms “mm m m, moms, no man sendmz by mu m
(auntie nn vim "mm cm s man-liq z svslnq mm.
m-
The uni How am 5 ram house mummw ; m mum on map 9m
Hiemlflsemm m System V Rams—n;
l7l Warnrm l?“ h—mnm
wy “a sum Now
14 mg Elllilks.
um
me mad w n morass 191.165.0472
mm
mm. 31 mum
two! mu
[m] my”! “53“ um mug. mum-anim
51! Jill 11 "115116 flowed mtuufltlfln avmnnrntnn By W Eddies
mm mmm
[m1 my“! new Mattemdzwmm in“,
Mm, sxm 31 mm A new/m(Minute!(mart-Sunnmtaswnedtbevaflnresi
» znm mmssam.
INFO]
66
Section 3 » Configuration
Statistics
The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-825
on both the Internet, LAN ports and both the 802.11n/g (2.4GHz) and 802.11n/a (5GHz) wireless bands. The traffic
counter will reset if the device is rebooted.
. v . suws -
DIR-325
smisncs
mm: sum dsuhy lean and mum meats azsshv munch your "may.
mans-s i am 5mm:
D-Link DIR—825 User Manual
um snmsncs
”1:3725 Wed: 47W
rxvadmtslwvwadn RXPmIsDNDW:fl
Cofions:0 Emma
WAN SlAHsnts
sumo mama
“WWW mpmtsmwedm
murmur Emma
saunznzs “Wk"
“n :u vandmzsnmpm.n
Emma
wmtusa MAHMXKS sun: umm
semen “wk"
nu: ( :u umswmrv
(maszn
67
Section 3 » Configuration
Internet Sessions
The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a
conversation between a program or application on a LAN-side computer and a program or application on aWAN-side
computer.
Helpful Hints".
INTERNET SESSIONS
This page d’spbys the full details of active internet sessions to your router. This is a list of all active
to ations between
I N computers and
LAN computers.
INTERNET SESSIONS
Loml HAT Internet: Protocol State D'r Priority Tune out
FI'A'I'IJ‘TIC.
\‘.‘II’-‘E.ESS "WE
D-Link DIR»825 User Manual 68
Section 3 , Configuration
Wireless
The wireless client table displays a list of current connected wireless clients. This table also displays the connection
time and MAC address of the connected wireless clients.
vnw um mks a“: Hunt! tmnemn to (he mill-er. (A mm mm mm m me hint —
a Few motes: an unamaed mama.)
«wax» or wmmss (nuns — mmiz mm: o
”mm mmms none Methane) sun-mu.)
- «Ur-ism m wmme, euwr mu 5mm: 11
ssn mead-as mm none means) sign-mi)
WISH
The WISH details page displays full details of wireless clients that are connected when WISH is enabled.
A vmcm sums sum-mu
Helplul mm...
The WISH sews page dehvs ful deals of mm tool wieless sass-ms (brush your router
when wlsu has been enabled. A wrsu session 5 a convalsatlm hemeen z pvwfim or
mm on a melesw connected LAN-ado cmuter and another cowuter, however
connected.
Wish SESSIONS Orin-tor
WIRELESS
D-Link DIR—825 User Manual 69
Section 3 » Configuration
D-Link DIR—825 User Manual
mum n worm"
sun
. ”mm mm 3;
AUVANLEU mu-
“ cad mm
a! 1m
loom um
wlnvuu mw
«mum:
UJIRELESS
70

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2008:11:12 18:12:34Z
Modify Date                     : 2008:11:12 13:27:14-05:00
Page Count                      : 15
About                           : fa45562f-b340-11dd-0000-0f4fe7322b5a
Producer                        : PrimoPDF
Mod Date                        : 2008:11:12 13:27:14-05:00
Creation Date                   : 2008:11:12 18:12:34Z
Author                          : yfaziloglu
Creator Tool                    : AFPL Ghostscript 8.54 PDF Writer
Metadata Date                   : 2008:11:12 13:27:14-05:00
Document ID                     : fa45562f-b340-11dd-0000-0f4fe7322b5a
Format                          : application/pdf
Title                           : UserMan-6_KA2DIR825B1.pdf
Creator                         : yfaziloglu

EXIF Metadata provided by EXIF.tools