D Link DWL700AP-A2 D-Link Air 2.4GHz Wireless Access Point User Manual dwl900AP manual 224

Download:
Mirror Download [FCC.gov]
Document ID	375534
Application ID	b5ougW5l2T3QyV/ZTrO+rA==
Document Description	User Manual Part 5
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	273.25kB (3415623 bits)
Date Submitted	2003-11-24 00:00:00
Date Available	2003-11-21 00:00:00
Creation Date	2003-06-14 08:22:43
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-06-25 17:32:24
Document Title	Microsoft Word - dwl900AP+_manual_224.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	baller

Using the Configuration Menu (continued)
Antenna transmit power: you may wish to select less than 100% power for security
reasons, depending its proximity to other networks
Antenna Selection: Select Left, Right or both (Diversity) antenna
Advanced > Filters
Use MAC Filters to allow or
deny wireless connection
to the DWL-700AP.
Select Disable MAC Filters
(default) to disable this
feature. Select Only allow
the MAC address… or Only
deny the MAC address…
and enter the MAC Address
of the selected computer into
the field above. Or you can
click on the pull-down arrow
Tools > Admin
Change your password in this
window. It can be up to 14
characters in length. Please
keep a copy of your password in
a safe place.
Click Apply, if you have made
any changes.
20
Using the Configuration Menu (continued)
Advanced > 802.1x
Disabled is the default selection for 802.1x protocol. Select Enabled to enable it.
Encryption Key: Select the key length, either 64 bits or 128 bits.
Lifetime: Select 5, 15, 30 minutes or 1 or 8 hours, or 1 day for the authentication
period. After this period expires, members of the network will have to re-logon to gain
access to the network.
Radius Server 1
IP: Enter the IP Address of the Radius Server.
Port: Enter the port number that your Radius Server uses for Authentication.
The default setting of 1812 is the port setting for many Radius Servers.
Shared Secret: Enter the Shared Secret. The shared secret must be the
same as the shared secret on your radius server.
Radius Server 2: Optional. If you have a second radius server, you will input the
same information as shown above.
21
21
20
Using the Configuration Menu (continued)
Tools > System
The current
system settings
can be saved as a
file onto the local
hard drive by
clicking Save. The
saved file can be
loaded back on the
DWL-700AP by
clicking Browse.
When you have
selected the
settings file, click
Load.
Click Restore to
return to Factory
Default Settings.
Fig. 5.10
Upgrade the
firmware for the
Access Point.
Click on the link to
find upgrades to
the firmware on
the D-Link
website at
http://support.dlink.
com. After you
have downloaded
a firmware
upgrade to your
local drive, click
Browse. Select
the firmware and
click Apply to
complete the
upgrade.
Tools > Firmware
Fig. 5.11
22

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Warning                         : Invalid secondary xref table
Has XFA                         : No

EXIF Metadata provided by EXIF.tools