D Link IR510LA1 AC750 Portable Router and Charger User Manual DIR 510L A1 Manual V1 01 HQ

Download:
Mirror Download [FCC.gov]
Document ID	2146940
Application ID	qaYHXbWvC2HyM4a0T5MVrg==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	453.09kB (5663579 bits)
Date Submitted	2013-12-19 00:00:00
Date Available	2013-12-20 00:00:00
Creation Date	2013-12-18 12:25:54
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2013-12-19 23:56:26
Document Title	DIR-510L_A1_Manual_V1.01(HQ).pdf
Document Creator	Adobe InDesign CS6 (Windows)
Document Author:	1015

Version 1.01 | 12/18/2013
User Manual
Wi-Fi AC750 Portable Router and Charger
DIR-510L
Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any
person or organization of such revisions or changes.
Manual Revisions
Revision
Date
Description
1.0
7 November, 2013
t
Initial release for Revision A1
1.01
18 December, 2013
t
Update to Revision A1
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
AppleÂŽ, Apple logoÂŽ, SafariÂŽ, iPhoneÂŽ, iPadÂŽ, iPod touchÂŽ and MacintoshÂŽ are trademarks of Apple Inc., registered in the U.S. and other countries.
App StoreSM is a service mark of Apple Inc.
Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc.
Internet ExplorerÂŽ, WindowsÂŽ and the Windows logo are trademarks of the Microsoft group of companies.
Copyright Š 2013 by D-Link Corporation, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation,
Inc.
D-Link DIR-510L User Manual
Table of Contents
Table of Contents
Preface ................................................................................. i
Manual Revisions ........................................................................... i
Trademarks ...................................................................................... i
Product Overview .............................................................. 1
Package Contents ......................................................................... 1
System Requirements ................................................................. 2
Introduction ................................................................................... 3
Features............................................................................................ 4
Hardware Overview ..................................................................... 5
Installation ......................................................................... 7
Wireless Installation Considerations ...................................... 7
Connection Diagrams ................................................................. 8
Broadband Router Setup ................................................... 8
Mobile Router Setup ........................................................... 9
Wi-Fi Hotspot Setup ...........................................................10
LAN Sharing Setup .............................................................11
Setting Up Your DIR-510L ........................................................12
Connecting Your Equipment ..........................................13
Connecting to Your DIR-510L .........................................14
Sharing Files.....................................................................16
Using the mydlink SharePort app for iPadÂŽ, iPhoneÂŽ, and
iPod touchÂŽ ...................................................................................16
Main Menu ............................................................................20
Documents............................................................................21
D-Link DIR-510L User Manual
Pictures ...................................................................................23
Videos .....................................................................................25
Music .......................................................................................27
Folders ....................................................................................30
Favorites .................................................................................33
Using the mydlink SharePort app for Android™..............34
Main Menu ............................................................................38
Documents............................................................................39
Pictures ...................................................................................41
Videos .....................................................................................43
Music .......................................................................................45
Folders ....................................................................................48
Favorites .................................................................................52
Using SharePort Mobile for WindowsÂŽ 8/RT .....................53
Main Menu ............................................................................56
Documents............................................................................57
Pictures ...................................................................................58
Movies.....................................................................................60
Music .......................................................................................62
Folder ......................................................................................65
Favorite ...................................................................................68
Using SharePort Web Access ..................................................69
Music .......................................................................................71
Pictures ...................................................................................72
Videos .....................................................................................73
Documents............................................................................74
ii
Table of Contents
Configuration ...................................................................75
Home ..............................................................................................76
Current Status ......................................................................76
Internet ...................................................................................77
Router .....................................................................................83
Wi-Fi Clients ..........................................................................85
USB Storage ..........................................................................86
Settings ..........................................................................................87
Internet Profiles ...................................................................87
DHCP ..................................................................................88
xDSL Broadband (PPPoE) ............................................89
3G/4G Wireless USB.......................................................90
Wi-Fi Hotspot Client ......................................................91
Static IP ..............................................................................92
Wi-Fi .........................................................................................93
Network (LAN) .....................................................................95
SharePort ...............................................................................97
Guest Zone ......................................................................... 100
mydlink ................................................................................ 101
Management............................................................................. 104
Admin .................................................................................. 104
System ................................................................................. 105
Upgrade .............................................................................. 106
Statistics .............................................................................. 107
WindowsÂŽ 7................................................................................ 111
WPA/WPA2 ......................................................................... 111
Windows VistaÂŽ......................................................................... 114
WPA/WPA2 ......................................................................... 115
WindowsÂŽ XP ............................................................................. 117
WPA/WPA2 ......................................................................... 118
Troubleshooting ............................................................120
Wireless Basics ...............................................................125
What is Wireless? ...................................................................... 126
Tips................................................................................................ 128
Wireless Modes......................................................................... 129
Networking Basics .........................................................130
Technical Specifications ................................................133
GPL Code Statement......................................................135
Safety Statements .........................................................150
Connecting a Wireless Client ........................................108
WPS Button ................................................................................ 108
WindowsÂŽ 8................................................................................ 109
WPA/WPA2 ......................................................................... 109
D-Link DIR-510L User Manual
iii
Section 1 - Product Overview
Package Contents
DIR-510L
Quick Installation Guide
Micro USB Power Adapter
D-Link Cloud Service Mobile Apps Guide
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a different voltage rating than the one included with the will cause damage and void the warranty for this product.
D-Link DIR-510L User Manual
Section 1 - Product Overview
System Requirements
Network Requirements
t
Cable/DSL modem, 3G/4G USB adapter, or a hotspot
t
IEEE 802.11bgn wireless clients
A computer or mobile device with the following:
t
Windows®, Macintosh, Linux-based, iOS, or Android™ operating
system
t
An installed Wi-Fi adapter
Web-based Configuration
Utility Requirements
Browser Requirements:
t
Internet ExplorerÂŽ 8 or higher
t
FirefoxÂŽ 12.0 or higher
t
SafariÂŽ 4 or higher
t
Chrome™ 20 or higher
WindowsÂŽ Users: Make sure you have the latest version of Java
installed. Visit www.java.com to download the latest version.
mydlink SharePort
Requirements
SharePort Mobile
D-Link DIR-510L User Manual
t
iPhone/iPad/iPod Touch (iOS 5.0 or higher)
t
Android device (2.3.3 or higher)
t
Windows 8/RT device
Section 1 - Product Overview
Introduction
The D-Link DIR-510L Wi-Fi AC750 Portable Router and Charger lets you create a secure wireless network to share photos, files, music,
and video on the go. Connect the router to a cable or DSL modem and share your high-speed Internet access with everyone on the
network. Even when you are away from home, connect to a Wi-Fi hotspot to share your Internet access with your friends securely. Directly
attaching a 3G/4G USB adapter allows sharing of a mobile broadband connection on the go. For convergence and convenience, the
DIR-510L also supports UPnP and DLNA protocols for easy sharing of media to other certified devices. With the mydlink SharePort and
SharePort Mobile apps, your iOS, Android, and Windows 8/RT devices can easily access files and stream media either remotely or locally
from a USB drive attached to the router.
The DIR-510L provides the latest Wireless AC 750 technology for smooth performance during data transmission and multimedia streaming.
It supports all of the latest wireless security features to prevent unauthorized access; no matter if you are connected to the Internet via
a wired or wireless connection. Support for WPA2 standards ensures that you’ll be able to use the best possible encryption method,
regardless of your client devices. WPS 2.0 Wi-Fi Protected Setup allows for easy and secure wireless connections and a Guest Zone feature
provides a separate subnet for guests to access the Internet without the privilege to access the administration UI. In addition, this router
allows VPN pass through via PPTP, L2TP, or IPSec for secure tunnel connections.
To round out this complete all-in-one mobile solution, the DIR-510L can charge mobile devices such as phones, tablets, and other devices
via its universal USB ports. This feature offers convenience and peace of mind when your devices are low on battery or when you’ve
forgotten to bring along your devices’ chargers on your travels.
D-Link DIR-510L User Manual
Section 1 - Product Overview
Features
t
 Advanced Wireless AC Technology - The DIR-510L provides up to 750 Mbps1 wireless speeds with other 802.11ac wireless
clients using dual frequency bands to free up network congestion. This capability allows for smooth performance in video
streaming, audio playback, and online gaming for multiple clients.
t
 Access the Internet - The DIR-510L allows you to connect all of your wireless devices to the Internet via wired Broadband,
3G/4G, or wireless hotspot.
t
 Multimedia On-The-Go - The DIR-510L is designed as the media hub for all of your mobile needs with the following features:
t
Dual USB Interfaces2 - Easily store and share music, videos, photos, and files on your USB drive while charging
another device.
t
 UPnP and DLNA Support3 - Compliant with the latest DLNA certification requirements, the DIR-510L can
stream many compatible media formats to other DLNA devices wirelessly.
t
mydlink SharePort app - Stream your media and upload files locally or remotely through the Internet to your
iPhone®, iPad® or Android™ device.
t
Built-in Charger4 - A 4000 mAh lithium-ion internal battery with Over Current Protection (OCP), Over Voltage
Protection (OVP), Over Temperature Protection (OTP), and Short Circuit Protection (SCP) lets you charge your
mobile devices on-the-go.
t
 Compatible with 802.11n, 802.11g and 802.11b Devices - The DIR-510L is still fully backward-compatible with the IEEE
802.11n, 802.11g and 802.11b standards, so it can connect with existing devices using these standards.
Maximum wireless signal rate derived from IEEE Standard specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of
network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.
The battery may be drained if a high-power 2.5” or 3.5” USB hard drive is attached to the USB ports.
DLNA support will be available in a future firmware update.
Actual usable capacity may vary depending on charging conditions.
D-Link DIR-510L User Manual
Section 1 - Product Overview
Hardware Overview
ON/OFF/CHARGER
Switch
Slide the switch to ON to operate the unit in router modes.1
Slide the switch to CHARGER to charge devices connected via USB.
WPS Button
Press the WPS button to automatically connect additional devices to the unit securely.
Reset Button
Pressing the Reset button restores the router to its original factory default settings.
USB Port 1 A
Connect a 3G/4G USB adapter to use Mobile Router Mode to share your Internet broadband.
Connect a USB drive to share locally using mydlink SharePort and SharePort Web Access.
Connect a device (high-power support) via USB cable to charge it.2
Green (Solid)
Green (Blinking)
Orange (Solid)
Red (Solid)
Battery LED
The device is currently connecting via WPS.
The device is booting or resetting.
Power/Status LED
Orange (Blinking)
The device is connected and working properly.
USB Port 0.5 A
The device cannot connect to the Internet or is in recovery mode.
The system is defective.
Off
The device is turned off or in charging mode.
Green (Solid)
Battery capacity is 80% or more.
Orange (Solid)
Battery capacity is between 15% and 80%.
Red (Solid)
Battery capacity is 15% or less.
Red (Blinking)
Battery is defective.
Off
Charging is complete (connected to power adapter) or the device
is out of battery.
Connect a USB drive to share locally using mydlink SharePort and SharePort Web Access.1
To comply with SAR certification, no RF devices can be connected to the 0.5 A USB port.
D-Link DIR-510L User Manual
Section 1 - Product Overview
Power Receptor
(Micro USB)
Connect the included power adapter to power and charge the unit.
INTERNET Port
Connect an Ethernet cable to a cable or DSL modem to use Broadband Router Mode.
If you have attached one or more USB devices (such as a 2.5” USB drive) that draw a total of 0.7 A or more power, the power adapter will not supply enough voltage to
charge your DIR-510L while simultaneously powering the USB devices.
The DIR-510L only supports charging other devices on USB port (1 A) in CHARGER mode.
D-Link DIR-510L User Manual
Section 2 - Installation
Installation
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the
operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings,
or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types
of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to
follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall
or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of
walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears
to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that
the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try
to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways.
Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and
concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.
5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security
systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base
is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
D-Link DIR-510L User Manual
Section 2 - Installation
Connection Diagrams
Broadband Router Setup
In the Broadband Router Mode, the DIR-510L connects to your cable modem, DSL modem, or other Internet source via an
Ethernet cable and wirelessly shares your Internet connection with other devices, providing Internet access for an entire home,
office, or hotel room. You can then connect an SD card and/or a USB drive to share files with these devices on your wireless
network by using the SharePort feature.
Note: To ensure performance when using SharePort, it is highly suggested to limit this application to 5 simultaneous users.
USB drive
Smartphone
Cable or DSL line
Internet
Modem
iPad
USB drive
Computer
Ethernet cable
D-Link DIR-510L User Manual
Section 2 - Installation
Mobile Router Setup
In the Mobile Router Mode, you must have a compatible 3G/4G USB adapter and be within your ISP’s cellular coverage. Once
connected, you can then wirelessly share your Internet connection with other devices on the go. You can also share files with
these devices on your wireless network by inserting a USB drive and using the SharePort feature.
Note: Please check your local D-Link website for more information on compatible 3G/4G USB adapters.
Smartphone
3G/4G USB
adapter
Internet
iPad
3G/4G cell
tower
USB drive
D-Link DIR-510L User Manual
Computer
Section 2 - Installation
Wi-Fi Hotspot Setup
You can set up your DIR-510L to share a hotspot (for example, at a cafe) wirelessly with other devices. In the Wi-Fi Hotspot
Mode, the DIR-510L connects wirelessly to another wireless network and then wirelessly shares your Internet connection with
other devices. You must have the username and password for the access point you are connecting the DIR-510L to.
Note: In public environments, it is highly recommended to password protect the shared Internet connection on the DIR-510L.
USB drive
Smartphone
Internet
Wi-Fi
Hotspot
iPad
USB drive
Computer
D-Link DIR-510L User Manual
10
Section 2 - Installation
LAN Sharing Setup
Even without Internet broadband access, you can connect other Wi-Fi devices wirelessly to the DIR-510L by creating a private
network anywhere. You can then connect one or two USB drives to locally share files with these devices on your wireless
network via the SharePort feature.
Note: In public environments, it is highly recommended to password protect the private LAN on the DIR-510L.
USB drive
Smartphone
iPad
USB drive
D-Link DIR-510L User Manual
Computer
11
Section 2 - Installation
Setting Up Your DIR-510L
t
 Peel off the protective film from the top and bottom of the
device.
t
 Charge the device by connecting one end of the power
adapter to the DIR-510L and the other end to a wall outlet.
Charge the device for at least 4 hours or until the battery LED
indicator is solid green or off.
Note: For more information on charging the device and the battery LED
indicator, refer to “Hardware Overview” on page 5.
D-Link DIR-510L User Manual
12
Section 2 - Installation
Connecting Your Equipment
Depending on your equipment, the DIR-510L can be set up easily from any device with Wi-Fi and a Web browser.
Using Broadband Ethernet: You will need an Ethernet cable
connection to your cable or DSL modem.
t
 Connect one end of an Ethernet cable to your modem and
the other end to the Internet port on the DIR-510L.
Using a 3G/4G USB Adapter: You will need a compatible
3G/4G USB adapter with an active SIM card. Please check our
compatibility list for more information.
3G/4G USB Adapter
t
 Plug the 3G/4G USB adapter into the USB 1 A port on the
DIR-510L.
Connecting to a Wi-Fi Hotspot: You will need the Wi-Fi network
name and password of the hotspot you want to connect to.
Wi-Fi Hotspot
D-Link DIR-510L User Manual
13
Section 2 - Installation
Connecting to Your DIR-510L
To configure the router, you will need to connect to it wirelessly from your mobile device or computer.
t
 Turn on DIR-510L by sliding the ON/OFF/CHARGER switch
to ON.
t
 On your computer or mobile device, connect to the DIR-510L’s
wireless network. By default, the settings are:
t
 2.4 GHz Wi-Fi Network Name (SSID): DIR510L
t
 5 GHz Wi-Fi Network Name: DIR510L_5GHz
t
 Password: (leave this blank)
Mobile
Desktop
t
 Once connected, open a Web browser on your mobile or
computer and type http://dlinkrouter.local. or http://
dlinkrouter in the URL address box.
t
 At the login page, enter the Admin Password. By default, it
should be left blank. Click Log In.
Note: If you have a device that supports Wi-Fi Protected Setup, please refer
to ”WPS Button” on page 108.
D-Link DIR-510L User Manual
14
Section 2 - Installation
After logging in, you will see the Current Status page. If the
is blue and there is a mark, you are already
Internet icon
connected to the Internet and the device is ready for use!
If the Internet icon
to :
is grey and there is an
icon, please refer
t
 “xDSL Broadband (PPPoE)” on page 89 if you are using
an xDSL modem.
t
 “3G/4G Wireless USB” on page 90 if you are using a 3G/4G
USB adapter.
t
 “Wi-Fi Hotspot Client” on page 91 if you are connecting
to a Wi-Fi hotspot.
D-Link DIR-510L User Manual
15
Section 3 - Usage
Sharing Files
Using the mydlink SharePort app for iPadÂŽ, iPhoneÂŽ,
and iPod touchÂŽ
The mydlink SharePort app is a streamlined mobile application that allows you to conveniently stream media and share files
stored on a removable storage connected to your router. Once the router is set up, you can start the app and easily connect
from a local network or through the Internet to access your photos, videos, music, and documents. It allows you to create your
own personal cloud storage; you can upload files and photos from your mobile device to the removable storage via the app
from anywhere in the world!
Note: In order to ensure smooth streaming performance, you will need a minimum of 2 Mbit/s upload bandwidth for your router’s Internet connection.
Streaming performance will vary depending on the quality of your Internet connection.
1. If you are connecting remotely through the mydlink SharePort app
from the Internet, you will need a mydlink account. Please refer to
“mydlink” on page 101 for more details.
2. Make sure the device is powered on. Then plug your USB drive into
the USB port of the device.
Note: If you connect a removable storage with many files or a large capacity, it
may take a while for the router to scan and catalog your files.
USB drive
D-Link DIR-510L User Manual
16
Section 3 - Usage
3. Use your iPhone, iPad or iPod Touch to search for and download the
free mydlink SharePort app from the App Store.
If you have a QR code reader, you can scan the code for mydlink
SharePort to the right.
4. On your mobile device, go to your Wi-Fi settings and connect to
your router’s wireless network using the default Wi-Fi settings. By
default, your wireless network details are:
t
 2.4 GHz Wi-Fi Network Name (SSID): DIR510L
t
 5 GHz Wi-Fi Network Name: DIR510L_5GHz
t
 Password: (leave this blank)
D-Link DIR-510L User Manual
17
Section 3 - Usage
5. Once connected, tap the mydlink SharePort icon, and the app will
load.
6. At the login page, tap to select between a local access or
remote access connection. If you are unsure, tap Help?
to see descriptions of the two types of connections.
Local Access:
Local mode will connect you to storage on your current network. For
example, if you are at home connecting to your router, choose this
mode.
Remote Access:
Remote mode will connect you to storage on your router in a different
location. For example, you are at your office connecting to your router at
home.
If you are directly connected to the DIR-510L’s wireless
network, tap Local Access and enter the Admin Password of your router,
then tap Log In.
If you are connecting through the Internet tap Remote Access and
enter your mydlink login information, then tap Log In. Tap on your router
on the devices page that appears. You can now share your files.
After logging in, select your router from the device list.
D-Link DIR-510L User Manual
18
Section 3 - Usage
7. You can now use the mydlink SharePort app interface to
stream media and access files stored on your removable drive.
The wireless icon at the bottom will be lit blue to indicate
a Local Access connection. It will be green to indicate you
are connected to the router through Remote Access.
Note: If you see a red wireless icon, your router’s network environment may not
be suitable for a direct network connection and you may experience slow
network speeds.
D-Link DIR-510L User Manual
19
Section 3 - Usage
Main Menu
The mydlink SharePort main menu has different sections that let you see all the documents, photos, movies, or music stored
on your removable storage. Tap < or >, or swipe left or right to move between the different sections. The Wi-Fi icon at the
bottom indicates an active local network connection (blue) or remote connection (green/red). Tap Log In if it is not lit, or Log
Out to return to the login page.
Tap on the document icon to view documents.
Tap the camera icon to view photos.
Tap on the movie icon to play videos.
Tap on the music icon to play audio files.
Tap on the folder icon to browse all files in a folder
view.
Tap on the star icon to access your favorite files.
D-Link DIR-510L User Manual
20
Section 3 - Usage
Documents
The Documents section allows you to share, print, and view documents
streamed from your DIR-510L to your mobile device. Tap the document
icon on the main menu to browse the documents on your mobile
device.
Search Bar: Enter a filename here to search your storage.
Tap to mark files for deletion.
Tap the star icon next to each file to download it to your device and
add it into your Favorites section.
Tapping this icon gives you additional options:
t
Mail: Tap to e-mail the file.
t
iCloud: Tap to store the file on iCloud.
t
AirPrint: Tap to print the file.
t
Open In...: Tap to use a third-party app to open the file.
The bottom menu bar includes these options:
Tap to go back to the main menu.
Tap to update the list of files.
Tap to reorder the files alphabetically.
D-Link DIR-510L User Manual
21
Section 3 - Usage
Tap on a file to start the document viewer. In the viewer:
Tap to add/remove the file from your Favorites.
Tap to bring up the same options as >.
Note: Some files may require a third-party app to view them.
D-Link DIR-510L User Manual
22
Section 3 - Usage
Pictures
The Pictures section allows you to stream images from your DIR-510L to
your mobile device. Tap the camera icon on the main menu to browse
your photo collection on your removable storage.
Search Bar: Enter a filename here to search your storage.
Tap to mark files for deletion.
Tap the star icon next to each file to download it to your device and
add it into your Favorites section.
Tapping this icon gives you additional options:
t
Mail: Tap to e-mail the image.
t
iCloud: Tap to store the image on iCloud.
t
AirPrint: Tap to print the image.
t
Facebook: Tap to upload the image to your Facebook account.
t
Twitter: Tap to upload the image to your Twitter account.
t
Open In...: Tap to use a third-party app to open the file.
The bottom menu bar includes these options:
Tap to go back to the main menu.
Tap to start a slideshow of your photos. Tap the screen again to
bring up the menu.
Tap to update the list of files.
Tap to reorder the files alphabetically.
D-Link DIR-510L User Manual
23
Section 3 - Usage
Tap on a file to start the photo viewer. In the viewer:
Tap to add/remove the current image from your Favorites.
Tap to start the slideshow.
Tap to bring up the same options as >.
D-Link DIR-510L User Manual
24
Section 3 - Usage
Videos
The Videos section allows you to stream video clips and movies from
your DIR-510L to your mobile device. Tap the movie icon on the main
menu to browse your videos on your removable storage.
Search Bar: Enter a filename here to search for a specific file.
Tap to mark files for deletion.
Tap the star icon next to a file to download it to your device and add
it into your Favorites section.
Tapping this icon gives you additional options:
t
Mail: Lets you e-mail the file.
t
iCloud: Lets you store the file on iCloud.
t
Open In...: Lets you use a third-party app to open the file.
The bottom menu bar includes these options:
Tap to go back to the main menu.
Tap to update the list of files.
Tap to reorder the files alphabetically.
D-Link DIR-510L User Manual
25
Section 3 - Usage
Tap on a file to start playing it. In the player:
Tap to play/pause the video. You can scroll to any time on the time
line by holding and sliding your finger.
Tap to enter/exit fullscreen mode.
Tap to add/remove the file from your Favorites.
Tapping this icon gives you additional options:
t
Mail: Lets you e-mail the video.
t
iCloud: Lets you store the video on iCloud.
t
Open In...: Lets you use a third-party app to open the file.
D-Link DIR-510L User Manual
26
Section 3 - Usage
Music
The Music section allows you to stream songs from your DIR-510L to
your mobile device. Tap the music icon on the main menu to browse
your music collection on your removable storage.
Search Bar: Enter a filename here to search your storage.
Tap to create a playlist and mark files for deletion.
Tap the star icon next to each file to download it to your device and
add it into your Favorites section.
Tapping this icon gives you additional options:
t
Mail: Lets you e-mail the file.
t
iCloud: Lets you store the file on iCloud.
t
Open In...: Lets you use a third-party app to open the file.
The bottom menu bar includes these options:
Tap to go back to the main menu.
Tap to update the list of files.
Tap to reorder the files alphabetically.
D-Link DIR-510L User Manual
27
Section 3 - Usage
Tap on a file to start playing it. In the player:
Tap to repeat all. Tap again to repeat a single song.
Tap to skip to the previous/next song.
Tap to enable/disable shuffle mode.
To create a playlist:
t
 Tap Edit > Add Playlist.
t
 Enter a name for the playlist, then tap Save.
t
 The name of the playlist will appear in the browser next
to the
icon.
D-Link DIR-510L User Manual
28
Section 3 - Usage
To add songs to a playlist:
t
 Tap the playlist in the browser.
t
 Tap Add Music... to add songs to the current playlist.
t
 Tick the songs you wish to add and tap Done.
To delete songs from the playlist:
t
 Tap Edit in the playlist browser and mark the files to be deleted.
t
 Tap Delete.
D-Link DIR-510L User Manual
29
Section 3 - Usage
Folders
You can browse your removable storage in a folder view in the folders
section. Tapping the filename will open the viewer/player for that file
type as described in the previous pages. You can also upload files from
your mobile device to the removable storage attached to your router.
Search Bar: Enter a filename here to search your storage.
Tap to take you to the editing screen where you can add a folder
and mark files for deletion or copying.
Tap the star icon next to each file to download it to your device and
add it into your Favorites section.
Tapping the > icon gives you additional options depending on the
file type.
The bottom menu bar includes these options:
Tap to go back to the main menu.
Tap to upload files from your device to your removable storage.
Tap to update the list of files.
Tap to reorder the files alphabetically.
D-Link DIR-510L User Manual
30
Section 3 - Usage
To delete files:
t
 Tap Edit at the top right.
t
 Tick the circle next to a file to mark it for deletion.
t
 Tap on Delete at the bottom to delete the file.
To copy files:
t
 Tap on Copy to bring up a window where you can select the folder
to copy to.
t
 Browse to the directory you want to copy the marked files to and
tap Paste.
t
 You can also tap Add Folder to create a new folder.
To create a new folder:
t
 Browse to the directory you wish to create a new folder in.
t
 Tap Edit at the top right.
t
 Tap Add Folder to add a new folder.
t
 Enter the name of the new folder, then tap Save.
t
 Tap OK to confirm folder creation.
D-Link DIR-510L User Manual
31
Section 3 - Usage
To upload images and videos from your mobile device:
t
 Browse to the folder you wish to upload to.
t
 Tap Upload at the bottom.
t
 Select the photos/videos you wish to upload.
t
 Tap Done.
During the upload process, the size of the file and the upload progress
will be displayed.
To upload more files, tap the + icon at the top right and repeat the
steps listed above.
D-Link DIR-510L User Manual
32
Section 3 - Usage
Favorites
The Favorites section allows you to quickly access your most often
used files, no matter what file type, in a special section. Files added to
the Favorites section will be copied here for playback in a centralized
location.
Tap to mark files for deletion from the local storage in Favorites.
The file will still be accessible in other mydlink SharePort sections.
Tapping this icon gives you additional options depending on the
file type.
The bottom menu bar includes these options:
Tap to go back to the main menu.
Tap to update the list of files.
Tap to reorder the files alphabetically.
Tap on a file to start the file viewer. In the viewer:
Tap to add/remove the file from your Favorites.
Tap to bring up additional options.
Note: The file options available will vary depending on the file type.
D-Link DIR-510L User Manual
33
Section 3 - Usage
Using the mydlink SharePort app for Android™
The mydlink SharePort app is a streamlined mobile application that allows you to conveniently stream media and share files
stored on a removable storage connected to your router. Once the router is set up, you can start the app and easily connect
from a local network or through the Internet to access your photos, videos, music, and documents. It allows you to create your
own personal cloud storage; you can upload files and photos from your mobile device to the removable storage via the app
from anywhere in the world!
Note: In order to ensure smooth streaming performance, you will need a minimum of 2 Mbit/s upload bandwidth for your router’s Internet connection.
Streaming performance will vary depending on the quality of your Internet connection.
1. If you are connecting remotely through the mydlink SharePort app
from the Internet, you will need a mydlink account. Please refer to
“mydlink” on page 101 for more details.
2. Make sure the device is powered on. Then plug your USB drive into
the USB port of the device.
Note: If you connect a removable storage with many files or a large capacity, it
may take a while for the router to scan and catalog your files.
USB drive
D-Link DIR-510L User Manual
34
Section 3 - Usage
3. Use your Android mobile device to search for and download the
free mydlink SharePort app from Google Play™.
If you have a QR code reader, you can scan the code for mydlink
SharePort to the right.
4. On your mobile device, go to your Wi-Fi settings and connect to
your router’s wireless network using the default Wi-Fi settings. By
default, your wireless network details are:
t
 2.4 GHz Wi-Fi Network Name (SSID): DIR510L
t
 5 GHz Wi-Fi Network Name: DIR510L_5GHz
t
 Password: (leave this blank)
D-Link DIR-510L User Manual
35
Section 3 - Usage
5. Once connected, tap the mydlink SharePort icon, and the app will
load.
6. At the login page, tap to select between a local access
or remote access connection. If you are unsure, tap ? to
see descriptions of the two types of connections.
Local Access:
Local mode will connect you to storage on your
current network. For example, if you are at home
connecting to your router, choose this mode.
Remote Access:
Remote mode will connect you to storage on your
router in a different location. For example, you are at
your office connecting to your router at home.
D-Link DIR-510L User Manual
36
Section 3 - Usage
If you are directly connected to the DIR-510L’s wireless network, tap
Local Access and enter the Admin Password of your router, then tap Log
In.
If you are connecting through the Internet tap Remote Access and
enter your mydlink login information, then tap Log In. Tap on your router
on the devices page that appears. You can now share your files.
After logging in, select your router from the device list.
7. You can now use the mydlink SharePort app interface to stream
media and access files stored on your removable drive.
The wireless icon at the bottom will be lit blue to indicate
a Local Access connection. It will be green to indicate you
are connected to the router through Remote Access.
Note: If you see a red wireless icon, your router’s network environment may not
be suitable for a direct network connection and you may experience slow
network speeds.
D-Link DIR-510L User Manual
37
Section 3 - Usage
Main Menu
The mydlink SharePort main menu has different sections that let you see all the documents, photos, movies, or music stored
on your removable storage. Tap < or >, or swipe left or right to move between the different sections. The Wi-Fi icon at the
bottom indicates an active local network connection (blue) or remote connection (green/red). Tap Log In if it is not lit, or Log
Out to return to the login page.
Tap on the document icon to view documents.
Tap the camera icon to view pictures.
Tap on the movie icon to play videos.
Tap on the music icon to play audio files.
Tap on the folder icon to browse all files in a folder
view.
Tap on the star icon to access your favorite files.
D-Link DIR-510L User Manual
Note: Available features may differ depending on the Android OS version
of your device.
38
Section 3 - Usage
Documents
The Documents section allows you to share, print, and view documents
streamed from your DIR-510L to your mobile device. Tap the document
icon on the main menu to browse the files on your mobile device.
Search Bar: Type in the name of a file to search for it.
Tap to return to the main menu.
Tap to refresh, sort, or mark files for deletion.
Tap the star icon next to each file to download it to your device and
add it into your Favorites section.
Tap
for additional options:
Tap to return to the main menu.
Tap to update the list of files.
Tap to sort the files by name, size, type, or date.
Check a file then tap to delete it.
D-Link DIR-510L User Manual
39
Section 3 - Usage
Tap on a file to start the document viewer. In the viewer:
t
 Tap the screen to bring up zoom in/out buttons.
t
 Drag the screen up or down to scroll between pages.
t
 Tap
to perform File, Find, Zoom, Reading View, Go To Page, and
Bookmarks actions.
Note: Available actions may differ depending on your Android OS.
D-Link DIR-510L User Manual
40
Section 3 - Usage
Pictures
The Pictures section allows you to view images streamed from your
DIR-510L to your mobile device. Tap the camera icon on the main menu
to browse your photo collection on your removable storage.
Search Bar: Type in the name of a file to search for it.
Tap to return to the main menu.
Tap to start a slideshow.
Tap to refresh, sort, or mark files for deletion.
Tap the star icon next to each file to download it to your device and
add it into your Favorites section.
Tap
for additional options:
Tap to return to the main menu.
Tap to update the list of files.
Tap to sort the files by name, size, type, or date.
Check a file then tap to delete it.
D-Link DIR-510L User Manual
41
Section 3 - Usage
Tap on an image file to start the image viewer. In the viewer:
Tap the star icon to download it to your device and add it into your
Favorites section.
Tap to start a slideshow. Tap the image to stop the slideshow.
Tap to delete the current image. Tap OK to confirm.
Tap to bring up additional options using other applications.
Tap to access the image editor.
Note: This function may vary depending on the version of your
Android OS.
D-Link DIR-510L User Manual
42
Section 3 - Usage
Videos
The Videos section allows you to stream video clips and movies from
your DIR-510L to your mobile device. Tap the movie icon on the main
menu to browse your videos on your removable storage.
Search Bar: Type in the name of a file to search for it.
Tap to return to the main menu.
Tap to refresh, sort, or mark files for deletion.
Tap the star icon next to a file to download it to your device and add
it into your Favorites section.
Tap
for additional options:
Tap to return to the main menu.
Tap to update the list of files.
Tap to sort the files by name, size, type, or date.
Check a file then tap this icon to delete it.
D-Link DIR-510L User Manual
43
Section 3 - Usage
Tap on a file to start playing it. Tap on the screen to bring up the scroll
bar, pause button, and play button.
Tap to resume playback.
Tap to pause the video.
Note: Available features may vary depending on the Android OS version installed
on your device.
D-Link DIR-510L User Manual
44
Section 3 - Usage
Music
The Music section allows you to stream songs from your DIR-510L to
your mobile device. Tap the music icon on the main menu to browse
your music collection on your removable storage.
Search Bar: Type in the name of a file to search for it.
Tap to return to the main menu.
Tap to refresh, sort, or mark files for deletion.
Tap to browse your playlists.
Tap the star icon next to a file to download it to your device and add
it into your Favorites section.
Tap
for additional options:
Tap to return to the main menu.
Tap to update the list of files.
Tap to sort the files by name, size, type, or date.
Check a file then tap this icon to delete it.
D-Link DIR-510L User Manual
45
Section 3 - Usage
Tap on a file to start playing it. In the player:
Tap on the up/down arrow to show/hide the player controls.
Tap to repeat all. Tap again to repeat a single song.
Tap to skip to the previous/next song.
Tap to play or pause the song.
Tap to enable/disable shuffle mode.
To create a playlist:
t
 Tap
t
 Tap Add new playlist...
t
 Enter a name for the playlist, then tap OK. The name of the playlist
icon.
will appear in the browser next to the
t
 You can tap
then
D-Link DIR-510L User Manual
to refresh the playlist page.
46
Section 3 - Usage
To add songs to a playlist:
t
 Tap a playlist to see its contents.
t
 Tap Add Music... to add songs to the current playlist.
t
 Tick the songs you wish to add and tap
to save.
To delete songs from the playlist:
t
 Tap Edit in the playlist browser and mark the files to be deleted.
t
 Tap
then tap OK to confirm.
D-Link DIR-510L User Manual
47
Section 3 - Usage
Folders
You can browse your removable storage in a folder view in the folders
section. Tapping the filename will open the viewer/player for that file
type as described in the previous pages. You can also upload files from
your mobile device to the removable storage attached to your router.
Search Bar: Type in the name of a file to search for it.
Tap to return to the main menu.
Tap to access file options.
In the file browser:
Tap to return to the main menu.
Tap to upload files.
Tap to refresh, sort, create a new folder, or mark files for deletion
and copying.
D-Link DIR-510L User Manual
48
Section 3 - Usage
Tap
to select files and perform the following actions:
Tap to update the list of files.
Tap to sort the files by name, size, type, or date.
Tap to create a new folder.
Mark a file then tap this icon to delete it.
Mark a file then tap this icon to copy it.
To delete files:
t
 Tap on
t
 Tap on
and tick the box next to a file for deletion.
to delete your selected files. Tap OK to confirm.
To copy files:
t
 Tap on
to select files for copying. Tick the box next to each
file for copying.
t
 Tap on
to browse to the destination.
D-Link DIR-510L User Manual
49
Section 3 - Usage
t
 Tap Paste or Cancel.
t
 You can also tap New Folder if you wish to create a folder in the
current directory.
To create a new folder:
t
 Browse to the directory you wish to create a new folder in.
t
 Tap
then
t
 Enter the name of the folder in the box, then tap OK.
D-Link DIR-510L User Manual
50
Section 3 - Usage
To upload images and videos from your mobile device:
t
 Browse to the folder you wish to upload to.
t
 Tap and browse to the file or files you wish to upload from the
local device.
t
 Tick the box next to each of the files you wish to upload.
t
 Tap Upload.
During the upload process, the size of the file and the upload progress
will be displayed under the file name.
t
 To remove a file from the upload queue, tap the X next to it.
D-Link DIR-510L User Manual
51
Section 3 - Usage
Favorites
The Favorites section allows you to quickly access your most often
used files, no matter what file type, in a special section. Files added to
the Favorites section will be copied here for playback in a centralized
location.
Search Bar: Type in the name of a file to search for it.
Tap to return to the main menu.
Tap to refresh, sort, or mark files for deletion.
Tap
for additional options:
Tap to return to the main menu.
Tap to update the list of files.
Tap to sort the files by name, size, type, or date.
Check a file then tap to delete it.
D-Link DIR-510L User Manual
52
Section 3 - Usage
Using SharePort Mobile for WindowsÂŽ 8/RT
The SharePort Mobile app is a streamlined mobile application that allows you to conveniently stream media and share files
stored on a removable storage connected to your router. Once the router is set up, you can start the app and easily connect
from a local network to access your photos, videos, music, and documents. Then, you can upload files and photos from your
mobile device to your router’s removable storage via the app wirelessly!
1. Make sure the device is powered on. Then plug your USB drive into
the USB port of the device.
Note: If you connect a removable USB drive with many files or a large capacity, it
may take a while for the router to scan and catalog your files.
USB drive
D-Link DIR-510L User Manual
53
Section 3 - Usage
2. Use your Windows 8/RT mobile device to search for and download
the free SharePort Mobile app from the Windows store.
3. On your mobile device, go to your Wi-Fi settings and connect to
your router’s wireless network using the default Wi-Fi settings. By
default, your wireless network details are:
t
 2.4 GHz Wi-Fi Network Name (SSID): DIR510L
t
 5 GHz Wi-Fi Network Name: DIR510L_5GHz
t
 Password: (leave this blank)
4. Once connected, tap the SharePort Mobile icon, and the app will
load.
5. At the main menu, if you see any greyed out icons, swipe the
right edge of the screen to bring up Settings. Then tap SharePort
Settings and enter your admin password. Tap on the back
icon to exit settings and log in. Once you are logged in, all of
the menu icons will be lit to indicate a successful connection.
D-Link DIR-510L User Manual
54
Section 3 - Usage
6. You can now use the SharePort Mobile app interface to stream media
and access files stored on your removable drive.
D-Link DIR-510L User Manual
55
Section 3 - Usage
Main Menu
The SharePort Mobile main menu has different sections that let you see all the documents, photos, movies, or music stored
on your removable storage. Tap an icon to access your files by type. In each section, you can tap
at any time to go back.
Tap on the document icon to view documents.
Tap the camera icon to view pictures.
Tap on the movie icon to play videos.
Tap on the music icon to play audio files.
Tap on the folder icon to browse all files in a folder
view.
Tap on the star icon to access your favorite files.
D-Link DIR-510L User Manual
56
Section 3 - Usage
Documents
The Documents section allows you to share, print, and view documents
streamed from your DIR-510L to your mobile device. Tap the document
icon on the main menu to browse the documents on your mobile
device.
In the documents browser, tap the document to open it with a thirdparty application.
Tap to sort files by...
Tap to refresh the list of files.
Tap to select files to be added as a favorite or deleted.
Tapping Edit and selecting one or more files gives you the following
options:
Tap to leave the editing screen.
Tap to add the file to Favorite and download it to your local device.
Tap to delete the selected file or files.
Tap to deselect all selected files.
D-Link DIR-510L User Manual
57
Section 3 - Usage
Pictures
The Pictures section allows you to stream images from your DIR-510L to
your mobile device. Tap the camera icon on the main menu to browse
your photo collection on your removable storage.
In the image browser, tap the image to open it.
Tap to start a slideshow of your images.
Tap to sort files by....
Tap to refresh the list of files.
Tap to select files to be added as a favorite or deleted.
Tapping Edit and selecting a file gives you the following options:
Tap to leave the editing screen.
Tap to add the file to Favorite and download it to your local device.
Tap to delete the selected file or files.
Tap to deselect all selected files.
D-Link DIR-510L User Manual
58
Section 3 - Usage
In the image viewer:
Tap to start a slideshow of your images.
Tap to open, mark as favorite, or delete the image.
After tapping Edit:
Tap to leave the editing screen.
Tap to add the file to Favorite and download it to your local device.
Tap to delete the selected file or files.
D-Link DIR-510L User Manual
59
Section 3 - Usage
Movies
The Movies section allows you to stream video clips and movies from
your DIR-510L to your mobile device. Tap the movie icon on the main
menu to browse your videos on your removable storage.
In the movies browser, tap the file to play it.
Tap to sort files by....
Tap to refresh the list of files.
Tap to select files to be added as a favorite or deleted.
Tapping Edit and selecting a file gives you the following options:
Tap to leave the editing screen.
Tap to add the file to Favorite and download it to your local device.
Tap to delete the selected file or files.
Tap to deselect all selected files.
D-Link DIR-510L User Manual
60
Section 3 - Usage
Tap on a file to start playing it. In the player:
Tap to play/pause the video. You can scroll to any time on the time
line by holding and sliding your finger.
Tap to enter/exit fullscreen mode.
Tap to adjust the volume.
Tap to add or delete the file.
After tapping Edit:
Tap to leave the editing screen.
Tap to return to the main menu.
Tap to add the file to Favorite and download it to your local device.
Tap to delete the file.
D-Link DIR-510L User Manual
61
Section 3 - Usage
Music
The Music section allows you to stream songs from your DIR-510L to
your mobile device. Tap the music icon on the main menu to browse
your music collection on your removable storage.
In the music browser, tap a file to play it with the music player.
Tap to repeat one or all songs.
Tap to enable/disable shuffle mode.
Tap to sort files by....
Tap to refresh the list of files.
Tap to select files to be added as a favorite or deleted.
Tapping Edit and selecting a file will show:
Tap to leave the editing screen.
Tap to add selected songs to a new play list.
Tap to add the file to Favorite and download it to your local device.
Tap to delete the selected file or files.
Tap to deselect all selected files.
D-Link DIR-510L User Manual
62
Section 3 - Usage
Tap on a file to start playing it. In the player:
Tap to play/pause the song.
Tap to skip to the previous/next song.
Tap to stop playback.
Tap to adjust the volume.
To create a playlist:
t
 Tap Edit, then select songs to be added to a new playlist.
t
 Tap Add Playlist.
t
 Enter a name for the playlist, then tap Save.
The playlist will appear in the browser as an
icon.
To add songs to a playlist:
t
 Tap your playlist to see its current contents.
t
 Tap Edit.
t
 Tap Add.
D-Link DIR-510L User Manual
63
Section 3 - Usage
t
 Select songs to be added to your playlist, then tap Add.
To delete songs from your playlist:
t
 Tap your playlist to see its current contents.
t
 Tap Edit in the playlist browser and mark the files to be deleted.
t
 Tap Delete to remove the file.
D-Link DIR-510L User Manual
64
Section 3 - Usage
Folder
You can browse your removable storage in a folder view in the Folder
section. Tapping the filename will open the viewer/player for that
file type as described in the previous pages. You can also upload files
from your mobile device to the removable storage attached to your
router here.
In the browser, tap the file to open it.
Tap to sort files by....
Tap to refresh the list of files.
Tap to upload files, create a new folder, or select files to be copied,
opened, favorited or deleted.
Tapping Edit will show:
Tap to return to the main menu.
Tap to upload a file from your device.
Tap to create a new folder.
D-Link DIR-510L User Manual
65
Section 3 - Usage
Tapping Edit and selecting a file gives you the following options:
Tap to leave the editing screen.
Tap to return to the main menu.
Tap to copy selected files.
Tap to add the file to Favorite and download it to your local device.
Tap to delete the selected file or files.
Tap to deselect all selected files.
To delete files:
t
 Browse to the folder with the file to be deleted.
t
 Tap Edit in the browser and mark the file to be deleted.
t
 Tap Delete to delete the file.
To copy files:
t
 Select the file to be copied and tap Copy.
t
 Browse to and select the destination folder.
t
 Tap Choose to copy the file to that folder.
D-Link DIR-510L User Manual
66
Section 3 - Usage
To create a new folder:
t
 Browse to the directory you wish to create a new folder in.
t
 Tap Edit at the top right.
t
 Tap New Folder and enter the name of the new folder.
t
 Tap Save to create the folder.
To upload images and videos from your mobile device:
t
 Browse to the folder you wish to upload to.
t
 Tap Upload. In the Upload screen, tap Upload to bring up
Windows file browser.
t
 Select your files to be uploaded from your device to the USB
storage and tap Open. The files will begin uploading.
t
 During the upload process, you can tap the upload queue files to
delete them from the queue.
t
 To upload more files, tap the Upload icon at the top right and
repeat the steps above.
D-Link DIR-510L User Manual
67
Section 3 - Usage
Favorite
The Favorite section allows you to quickly access your most often used
files, no matter what file type, in a special section. Files added to this
section will be copied here for playback in a centralized location.
In the Favorite browser, tap the file to open it.
Tap to refresh the list of files.
Tap to select files to be opened or deleted.
Tapping Edit and selecting a file gives you the following options:
Tap to leave the editing screen.
Tap to delete the selected file or files.
Tap to deselect all selected files.
D-Link DIR-510L User Manual
68
Section 3 - Usage
Using SharePort Web Access
SharePort Web Access lets you stream music, photos, and movies from a USB drive attached to your DIR-510L through a Web
browser. You can also download and upload files to and from a computer through the Web browser interface.
t
 Type http://shareport.local. in your browser’s URL to take
you to the SharePort Web Access log in page.
t
 Log in with your admin password or a SharePort Username
and Password.
At the main menu, you can browse the files stored on your USB
drive by file type.
t
 Click
to browse by folders.
D-Link DIR-510L User Manual
69
Section 3 - Usage
The folder browser section will show folder hierarchy at the left
and files at the right. You can quickly browse directories and
perform operations by using the buttons in the folder browser
view.
t
 Click
to return to the main menu.
To create a new folder:
t
 Click New Folder in the current directory.
t
 Enter a folder name in the Create Folder pop-up.
t
 Click OK. The new folder will appear in the left column.
To upload a file:
t
 Click Upload to upload a file to the current folder.
t
 In the pop-up browse to the file you wish to upload.
t
 Click OK. The file will appear after the browser refreshes.
To delete a file:
t
 Tick the checkbox next to the files you wish to delete.
t
 Click Delete and a dialog box will appear.
t
 Click OK to confirm.
D-Link DIR-510L User Manual
70
Section 3 - Usage
Music
You can go to the Music section to browse and play the music files on your storage. Click Back to return to the main menu.
t
 Click on the audio filename to play it in the browser.
You can pause, seek, mute and adjust the volume in the window.
t
 Close the window to end playback.
D-Link DIR-510L User Manual
71
Section 3 - Usage
Pictures
You can go to the Pictures section to browse and view the image files on your storage. Click Back to return to the main menu.
t
 Click on the image name to view it in the browser.
t
 Hover your mouse over the left or right side of the image and
click < or > to view the previous or next image.
D-Link DIR-510L User Manual
72
Section 3 - Usage
Videos
You can go to the Videos section to browse and play the video files on your storage. Click Back to return to the main menu.
t
 Click on the video file to open the file in a window for
streaming.
You can pause, seek, mute, adjust the volume, and activate full
screen mode in the window controls.
t
 Close the window to end playback.
Note: Depending on your browser, the video file may be played back using
the default player associated with that file format.
D-Link DIR-510L User Manual
73
Section 3 - Usage
Documents
You can go to the Documents section to open and save files from your storage to your computer. Click Back to return to the
main menu.
t
 Click on the filename to open the file.
t
 Depending on the file type, the default program will be
started or a pop-up may ask you to open or save the file.
D-Link DIR-510L User Manual
74
Section 4 - Configuration
Configuration
Before you can use your DIR-510L, you will need to access its configuration utility by using a Web browser.
t
 To access the configuration utility of the DIR-510L, open
a Web browser and enter http://dlinkrouter.local. or
http://dlinkrouter in the address bar.
t
 Enter your password for the Admin account.
By default, the password is blank.
t
 Click Log In.
The router’s home page will open, and you can check its current
status, start a wizard, and navigate to the different settings of the
DIR-510L.
The bar at the top of the page has quick access to Settings and
Management functions, and you may quickly jump back Home
at any time.
Note: The system will automatically log out after a period of inactivity.
D-Link DIR-510L User Manual
75
Section 4 - Configuration
Home
The Home page will display a diagram with icons indicating the statuses of various functions and connections. Clicking on an
icon with an next to it will start a wizard for that function. You may also click on the to configure your Internet connection.
If the link to the Internet shows , this means your router has been assigned an uplink IP but does not have Internet access.
You will need to contact your service provider. If the link is showing a , it means you are connected to the Internet.
Internet: The Internet icon indicates the status of the Internet connection to the router. It is grey if there is no connection,
and blue if a connection is established.
DIR-510L: The router icon indicates the status of the Wi-Fi security on the DIR-510L. It is grey if it is unsecured, and blue if your Wi-Fi network
name (SSID) and password have been set.
Wi-Fi Clients: The Wi-Fi icon indicates if there are clients currently connected to the router via Wi-Fi. It will be blue if there are active connections.
USB Storage: The USB icon will be blue if you have connected a USB storage device to the router.
D-Link DIR-510L User Manual
76
Section 4 - Configuration
Internet
Broadband Ethernet
If you have connected the DIR-510L to a cable modem via an Ethernet cable, your Internet should be connected and ready for
use. The Internet icon will be blue and the connection will have a check mark .
If you have connected the DIR-510L to an xDSL modem via an
Ethernet cable but can not access the Internet:
t
 Click on the Internet icon to start the wizard.
t
 Enter the Username and Password as provided by your
Internet Service Provider.
t
 Click Save.
D-Link DIR-510L User Manual
77
Section 4 - Configuration
Once you are connected:
t
 Click on the Internet icon to display the IPv4 network details
below the diagram. You can view the IPv6 details by clicking
at the top right.
Note: This information will be saved as an xDSL Broadband (PPPoE) Internet
Profile for future use.
t
 Click on DHCP Release if you wish to disconnect from the
Internet.
t
 To reconnect to the Internet, you may click the Internet icon
and then click Connect in the pop-up dialog to enable DHCP.
D-Link DIR-510L User Manual
78
Section 4 - Configuration
3G/4G Mobile Broadband
You can connect a compatible 3G/4G USB adapter to the USB port on the DIR-510L to access the Internet. Depending on your
mobile service provider, you may have to input optional settings before use. You may need to contact your service provider
regarding these details.
PIN code Enter the 4-digit PIN for your SIM card.
(optional):
t
 Click Save to store the settings.
APN: Enter your service provider’s APN.
Dial-Up Num- Enter the dial-up number required by your service
ber (optional): provider.
Username Enter the username provided by your service provider.
(optional):
Password Enter the password provided by your service provider.
(optional):
t
 Click Save to store the settings.
D-Link DIR-510L User Manual
79
Section 4 - Configuration
When you are connected to the Internet via mobile broadband, the Internet icon should be blue and the link will have a green
check mark .
Clicking on the Internet icon will display the 3G/4G network details. You may click on the Disconnect button to drop the 3G/4G
connection .
Connection Type: Displays whether it is a 3G/4G network.
Operator: Displays the country name and service provider.
Network Status: Displays the status of the connection to the 3G/4G
network.
Connection Up Displays the number of days, hours, minutes, and seconds
Time: the router has been connected to the 3G/4G network.
MAC Address: Displays the MAC address of the 3G/4G adapter.
IP Address: Displays the IP address provided to the router.
Subnet Mask: Displays the subnet mask of the 3G/ 4G network.
Default Gateway: Displays the default gateway of the 3G/4G network.
Primary Displays the primary DNS server of the 3G/4G network.
DNS Server:
Secondary Displays the secondary DNS server of the 3G/4G network.
DNS Server:
D-Link DIR-510L User Manual
80
Section 4 - Configuration
Wi-Fi Hotspot
On the Home page, when you wish to connect to the Internet via a Wi-Fi hotspot, there will be a
Click it to start the wizard.
next to the Internet icon.
t
 Click Next to scan available Wi-Fi networks.
t
 Click on the hotspot network you wish to connect to and
click Select.
t
 You will need to enter a password if there is a lock icon next
to that network. Enter the password and click Save. You will
need to wait while the router connects to the network.
D-Link DIR-510L User Manual
81
Section 4 - Configuration
Once you are connected, the Internet icon will be blue and the status diagram will show a green check mark when the
connection is established. You can now click on the Internet icon in the Current Status diagram to see details of the connection.
You may also click on the button to Disconnect from this network .
Connection Type: Displays whether it is a hotspot network connection.
Network Status: Displays the status of the connection to the hotspot
network.
Hotspot Name (SSID): Displays the SSID or the name of the hotspot network.
Password: Displays the password of the hotspot network.
Connection Up Displays the number of days, hours, minutes, and seconds
Time: the router has been connected to the hotspot network.
MAC Address: Displays the MAC address of the hotspot router.
IP Address: Displays the IP address provided to the router.
Subnet Mask: Displays the subnet mask of the hotspot network.
Default Gateway: Displays the default gateway of the hotspot network.
Primary Displays the primary DNS server of the hotspot network.
DNS Server:
Secondary Displays the secondary DNS server of the hotspot
DNS Server: network.
Note: These connection details will be saved as a Wi-Fi Hotspot under
Internet Profiles to allow automatic connections to this network in
the future. For more information, please refer to “Internet Profiles”
on page 87.
D-Link DIR-510L User Manual
82
Section 4 - Configuration
Router
On the home page, you can proceed to secure your wireless network. To secure your network, you may customize your Wi-Fi
Network Name (SSID) and Password by clicking on the router icon. You may also customize the 2.4 GHz and 5 GHz network
settings independently.
t
 Click on the router icon with the
start the wizard.
next to “DIR-510L” to
t
 Click Secure your network in the pop-up.
On the Wi-Fi Settings page, you can customize the Wi-Fi
Network Name (SSID) and Password for both bands.
Note: Enter a password with a minimum of 8 characters.
t
 Click Save. The settings will take effect and you will be
disconnected from the network.
D-Link DIR-510L User Manual
83
Section 4 - Configuration
Devices may now connect to the network using the new SSID and
will no longer be displayed on the Home page.
password. The
t
 Clicking on the router icon will now display Network, Wi-Fi,
and Guest Zone information.
t
 Clicking on the links will take you to their respective pages
under Settings where you can further configure advanced
settings.
For Network, please refer to “Network (LAN)” on page 95.
For Wi-Fi, please refer to “Wi-Fi” on page 93.
For Guest Zone, please refer to “Guest Zone” on page 100.
D-Link DIR-510L User Manual
84
Section 4 - Configuration
Wi-Fi Clients
On the Home page, clicking on the Wi-Fi Clients icon takes you to a page where you can see a list of all devices connected to
your Wi-Fi network on both the 2.4 GHz and 5 GHz bands.
t
 Click on the Wi-Fi icon to access Wi-Fi client details.
The box for each device will show its connection status, name,
vendor, IP address, and access status. To change the settings for
each device, you can click on the pencil icon to bring up a new
window.
Name: Enter a custom name for this client.
Vendor: Displays the vendor of the device.
IP Address: Enter a specific IP address for this client.
Reserved IP: Enable to reserve this IP address for this client.
Access: Allow or Block access to the router.
t
 Click Save when you are done.
D-Link DIR-510L User Manual
85
Section 4 - Configuration
USB Storage
If you have a USB drive attached to the DIR-510L, you can view the storage details from the Home page via the USB Storage
pane.
t
 Click on the USB Storage icon to access storage details.
USB1/USB2
Available Space: Displays the amount of free space on the USB storage.
Total: Displays the total capacity of the USB storage.
DLNA MEDIA SERVER
Status: Displays if DLNA is enabled or disabled.
Service Name: Displays the name of the DLNA server as it appears to
other devices on the network.
SHAREPORT
Status: Displays if SharePort is enabled or disabled.
For more information on DLNA and SharePort settings, please
refer to “SharePort” on page 97.
D-Link DIR-510L User Manual
86
Section 4 - Configuration
Settings
Internet Profiles
Internet Profiles are networks you want the device to remember and reconnect to in the future.
Profiles are created automatically the first time you connect to a particular network. The Profile
List shows all of the saved profiles and you can select the profile you wish to use by clicking on the
radio button. You may also Add, Edit, and Delete profiles from this page.
To Add a profile:
t
 Click Add Profile.
t
 On the next screen, select a connection type from the drop
down menu.
t
 Fill in the required information under the connection type.
If required, click on Advanced Settings... to fill in details
required by the ISP.
t
 Click Save to store the profile.
To Edit a profile:
t
 Click on the pencil icon next to the profile you want to edit.
To Delete a profile:
t
 Click on the trash icon next to the profile you want to delete.
D-Link DIR-510L User Manual
87
Section 4 - Configuration
DHCP
Depending on your connection method and your service provider, you may select the default DHCP profile to automatically
connect to the Internet. Click on the pencil to edit it. Click Save to store your settings.
Host Name: Enter the name of your host.
MAC Address Clone: Type in the MAC address or select the client from the
drop-down menu and click <<.
D-Link DIR-510L User Manual
88
Section 4 - Configuration
xDSL Broadband (PPPoE)
Depending on your Internet Service Provider, you may need to configure the PPPoE settings in order to connect to the Internet.
You may need to contact your ISP for this information. Click Save to store your settings.
My Internet Select xDSL Broadband (PPPoE) from the drop-down list.
Connection is:
Profile Name: Enter a custom name for this profile.
Username: Enter the username assigned by your ISP.
Password: Enter the password assigned by your ISP.
ADVANCED SETTINGS
Address Mode: Select Static IP if your ISP assigned you the IP address,
Subnet Mask, ateway, and DNS Server addresses.
Otherwise, select Dynamic.
Service Name: Enter the ISP Service Name (optional).
Reconnect Mode: Select either Always-on, On-Demand, or Manual.
Primary Enter the Primary DNS Server Address.
DNS Address:
Secondary Enter the Secondary DNS Server Address.
DNS Address:
MTU: Maximum Transmission Unit - you may need to change
the MTU for optimal performance with your specific ISP.
1492 is the default MTU.
Note: If you are using a PPPoE connection, you will need to remove or disable
any PPPoE client software running on your computers.
D-Link DIR-510L User Manual
89
Section 4 - Configuration
3G/4G Wireless USB
Depending on the service provider for your 3G/4G wireless service, you may need to configure the 3G/4G settings in order to
connect to the Internet. You may need to contact your ISP for this information. Click Save to store your settings.
My Internet Select 3G/4G Wireless USB from the drop-down list.
Connection Is:
Profile Name: Enter a custom name for this profile.
Dial-up Number: Enter your service provider’s dial-up number.
APN: Enter the password assigned by your ISP.
ADVANCED SETTINGS
Country: Select the country of your service provider.
ISP: Select your provider from the drop-down menu.
Username: Enter the username assigned by your service provider.
Password: Enter the password assigned by your service provider.
Authentication Select between Auto(PAP+CHAP), PAP, or CHAP, depending
Protocol: on your service provider.
SIM Card Status: Displays whether your SIM card is locked or unlocked.
Reconnect Mode: Select between Always-on, On Demand, or Manual.
MTU: Maximum Transmission Unit - you may need to change
the MTU for optimal performance with your specific ISP.
1500 is the default MTU.
D-Link DIR-510L User Manual
90
Section 4 - Configuration
Wi-Fi Hotspot Client
This is the Wi-Fi Hotspot page; you may need to configure the settings in order to connect to the Internet. You may need to
contact your hotspot provider for this information. Click Save to store your settings.
Hotspot Network Enter the name of your hotspot or click Scan to select
Name (SSID): from a list. Please refer to “Wi-Fi Hotspot” on page 81
for detailed steps.
Security: Select None, WEP, or WPA/WPA2-Personal encryption
depending on the security of your hotspot.
Password: Enter the hotspot network password.
D-Link DIR-510L User Manual
91
Section 4 - Configuration
Static IP
Depending on your Internet Service Provider, you may need to configure the static IP settings in order to connect to the Internet.
You may need to contact your service provider for this information. Click Save to store your settings.
My Internet Select Static IP from the drop-down list.
Connection Is:
IP Address: Enter the IP address assigned by your ISP.
Subnet Mask: Enter the Subnet Mask assigned by your ISP.
Default Gateway: Enter the Gateway assigned by your ISP.
Primary Enter the Primary DNS Address assigned by your ISP.
DNS Address:
ADVANCED SETTINGS
Secondary Enter the Secondary DNS Address assigned by your ISP.
DNS Address:
MTU: Maximum Transmission Unit - you may need to change
the MTU for optimal performance with your specific ISP.
1500 is the default MTU.
D-Link DIR-510L User Manual
92
Section 4 - Configuration
Wi-Fi
To secure your Wi-Fi network manually and/or access advanced settings, you can go to the Wi-Fi
page under Settings. You can configure the settings for both the 2.4 GHz and 5 GHz bands on this
page. Click Save to store your settings.
2.4 GHz
Wi-Fi Network Name Enter a custom name for your 2.4 GHz network.
(SSID):
Password: Enter a custom password for your network.
ADVANCED SETTINGS
Security Mode: Select from None or WPA/WPA2-Personal
802.11 Mode: 802.11b Only - Select only if all of your wireless clients
are 802.11b.
802.11g Only - Select only if all of your wireless clients
are 802.11g.
802.11n Only - Select only if all of your wireless clients
are 802.11n.
Mixed 802.11g/b - Select if you are using both 802.11g
and 802.11b wireless clients.
Mixed 802.11n/g - Select if you are using both 802.11n
and 802.11g wireless clients.
Mixed 802.11b/g/n - Select if you are using both 802.11b,
802.11g, and 802.11n wireless clients.
Wi-Fi Channel: Change the channel setting for the DIR-510L. By default
the channel is set to Auto.
Transmission Power: Select from High, Medium, or Low.
Channel Width: Select between Auto 20/40 MHz or 20 MHz.
D-Link DIR-510L User Manual
93
Section 4 - Configuration
5 GHz
Wi-Fi Network Name Enter a custom name for your 5 GHz network.
(SSID):
Password: Enter a custom password for your network.
ADVANCED SETTINGS
Security Mode: Select from None or WPA/WPA2-Personal
802.11 Mode: 802.11a Only - Select only if all of your wireless clients
are 802.11b.
802.11n Only - Select only if all of your wireless clients
are 802.11g.
Mixed 802.11a/n - Select if you are using both 802.11a
and 802.11n wireless clients.
Mixed 802.11a/n/ac - Select if you are using both 802.11a
802.11n, and 802.11ac wireless clients.
Wi-Fi Channel: Change the channel setting for the DIR-510L. By default
the channel is set to Auto.
Transmission Power: Select from High, Medium, or Low.
Channel Width: Select between Auto 20/40/80, Auto 20/40 MHz, or 20
MHz.
D-Link DIR-510L User Manual
94
Section 4 - Configuration
Network (LAN)
You can configure the local network settings for your router by going to Network (LAN) under
Settings. Click Save to store your settings.
NETWORK SETTINGS
Device IP Address: Enter the IP address of the router. The default IP address
is 192.168.0.1.
If you change the IP address, once you click Save Settings,
you will need to enter the new IP address in your browser
to get back into the configuration utility.
Subnet Mask: Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Device Name: Enter a name for the router.
Local Domain Name: Enter the Domain name (Optional).
Enable DNS Relay: Disable DNS Relay to transfer the DNS server information
from your ISP to your computers. If enabled, your
computers will use the router for a DNS server.
D-Link DIR-510L User Manual
95
Section 4 - Configuration
DHCP SERVER
Status: Slide to enable or disable the DHCP server function.
DHCP IP Address Enter the starting and ending IP addresses for the DHCP
Range: server’s IP assignment.
Note: If you statically (manually) assign IP addresses to your
computers or devices, make sure the IP addresses are outside
of this range or you may have an IP conflict.
DHCP Lease Time: The length of time for the IP address lease. Enter the Lease
time in minutes.
Always Broadcast: Enable this feature to broadcast your network’s DHCP
server to LAN/WLAN clients.
D-Link DIR-510L User Manual
96
Section 4 - Configuration
SharePort
On this page, you can configure the various storage sharing features of your router. The DLNA
server allows you to stream stored pictures, music, and video to another DLNA-compatible device
on your network. SharePort Web Access allows you to use a Web browser to access stored files from
a PC connected to your network. Click Save to store your settings.
DLNA MEDIA SERVER
Status: Slide to enable or disable the DLNA Media Server function.
DLNA Media Server Enter a name for the DLNA Media Server.
Name:
SHAREPORT WEB ACCESS
Status: Slide to enable or disable the SharePort Web Access
function.
Direct Links: Click on the first link to reach your SharePort page using
HTTP protocol.
Click on the second link to reach your SharePort page
using HTTPS protocol.
D-Link DIR-510L User Manual
97
Section 4 - Configuration
You can manage your user accounts and their access privileges
for SharePort Web Access by clicking on the Users tab.
The User List displays the Username, Access Path, and Permissions
of all saved users.
USERS
t
 To Edit a user, click on the pencil icon.
t
 To Delete a user, click on the trash icon.
t
 To Create a user, click on Create a New User +.
A window with the following fields will appear:
Username: Enter a username for the new user.
Password: Enter a password for the new user.
Permissions: Select Read Only or Read/Write privileges from the dropdown.
Folder: Click Browse to select a folder that you want this user to
access. You can browse to lower directories by clicking
on the rightward-facing arrow.
Click on the folder name to add it. Then, click Append.
If you wish to add multiple sub-directories, repeat the
steps above. Click Save.
t
 Click Save to store your settings.
D-Link DIR-510L User Manual
98
Section 4 - Configuration
You can now log in to SharePort Web Access with any of the
accounts you created by typing http://shareport.local. in your
browser URL to access the log in page.
D-Link DIR-510L User Manual
99
Section 4 - Configuration
Guest Zone
You can create a Wi-Fi Guest Zone to share Internet access with guests on a separate Wi-Fi network
for both the 2.4 GHz and 5 GHz networks. This is useful when you wish to block guests from accessing
devices on your home network.
Status: Enable or disable the Guest Zone feature.
Guest Zone Wi-Fi Enter a custom Guest Zone name.
Name (SSID):
Password: Enter a password for your Guest Zone.
Allow Local Access: Enable or disable this feature to allow or block guests from
accessing devices and files on your network.
t
 Click Save to store the settings.
D-Link DIR-510L User Manual
100
Section 4 - Configuration
mydlink
Setting and registering your router with mydlink will allow you to use its mydlink cloud services
features, including online access and management of your router through the mydlink portal
website.
If you have an existing account:
t
 Select Yes, I have a mydlink account.
t
 Log in with the E-mail address and password that you signed
up with.
t
 Click the Save button.
D-Link DIR-510L User Manual
101
Section 4 - Configuration
If you do not have an account:
t
 Select No, I want to create a new mydlink account.
t
 Fill in the following fields.
t
 Read and tick the checkbox next to I accept the mydlink
terms and conditions.
t
 Click the Sign Up button.
Note: If you have not set an admin password, you will be asked to do so
now. Click Save.
D-Link DIR-510L User Manual
102
Section 4 - Configuration
Accessing Settings>mydlink will now display a summary of your
mydlink Service status and mydlink Account.
Note: After mydlink registration is completed, your router’s default PPPoE
connection will be set to Always On. If your ISP charges for usage,
you may wish to manually choose Dial On Demand as your default
setting, however, mydlink features may not work as intended.
D-Link DIR-510L User Manual
103
Section 4 - Configuration
Management
Admin
On this page, you can change the admin security settings for logging in to the router configuration interface. It is highly
recommended that you create a password with a minimum of 6 characters to keep your router secure. Click Save to store your
settings.
Admin Password: Enter a password to secure administrative access to your
router.
Enable Graphical If enabled, you will be required to enter a CAPTCHA along
Authentication with your password at the log in page.
(CAPTCHA):
You will need to log back into the configuration interface with
the new password.
If CAPTCHA has been enabled, you will need to enter the 4-digit
code as well.
D-Link DIR-510L User Manual
104
Section 4 - Configuration
System
Here, you can save or restore your router settings to and from a file. You can also reset your router to the factory default settings
and reboot the router.
Save Settings to Use this option to save the current router configuration
Local Hard Drive: settings to a file on the hard disk of the computer you are
using. First, click the Save Settings to File button. A file
dialog will appear, allowing you to select a location and file
name for the settings.
Load Settings Use this option to load previously saved router configuration
from Local Hard settings. First, click the Select File button to find a previously
Drive: saved file of configuration settings. Then, click the Restore
Settings From File button to transfer those settings to the
router.
Reset to Factory This option will restore all configuration settings back to
Default Settings: the settings that were in effect at the time the router was
shipped from the factory. Any settings that have not been
saved will be lost, including any rules that you have created.
Clicking OK in the window will require you to reconnect to
this device using the default SSID and password.
Reboot Device: Click to reboot the router.
Note: Resetting your router here or via the RESET button will have the same
effect as Reset to Factory Default Settings.
D-Link DIR-510L User Manual
105
Section 4 - Configuration
Upgrade
This page displays your current firmware version and language pack, and allows you to check for and download new firmware.
After downloading the firmware, you can then upload it from this page. If you are using a language pack for your web UI,
we recommend that you also download the latest version when upgrading the firmware to ensure that any changes in the
interface are shown correctly.
FIRMWARE INFORMATION
Current Firmware Displays the version of the installed firmware.
Version:
Current Firmware Displays the date of the installed firmware.
Date:
Click Check for New Firmware to retrieve the latest
version.
LANGUAGE PACK INFORMATION
Current Language Displays the installed language pack.
Pack: You can select your language on the login page.
Click Remove to uninstall any previously installed
language packs.
UPGRADE MANUALLY
Upgrade Firmware: Click Select File to open a window and select a
downloaded firmware file. Click Upload to install it.
Add a Language Click Select File to install a downloaded language pack.
Pack: Click Upload to install it.
D-Link DIR-510L User Manual
106
Section 5 - Status
Statistics
This page provides statistics about data transmitted and received by your router through the Internet (WAN) on your router’s
2.4 GHz and 5 GHz wireless networks. It also displays the status of the internal battery. The graph displays the real-time upstream
and downstream transfer speeds depending on which tab (Internet or Wi-Fi) you are currently viewing.
The Blue line indicates the upload speeds and the red line
indicates the download speeds.
Click Clear to reset the statistics.
The table below displays the following in real-time:
t
 Total Packets
t
 Total Byte(s)
t
 Total Kbit(s)
t
 Kbits/sec
t
 Session (Internet only)
The Session box displays the number of active Internet sessions
through your router. An Internet session is a conversation between
a program or application on a LAN-side computer and a program
or application on a WAN-side computer.
The Battery tab shows the remaining charge in percent.
D-Link DIR-510L User Manual
107
Section 6 - Connecting a Wireless Client
Connecting a Wireless Client
WPS Button
The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the router. Please refer to your user manual for the wireless
device you want to connect to make sure you understand how to enable WPS. To connect a client, follow the steps below:
To connect your wireless devices to the router using WPS:
WPS Button
Step 1 - Press the WPS button on the router for about 1 second.
The Power/Status LED will start to blink.
Step 2 - Within 2 minutes, press the WPS button on your wireless client
(or launch the software utility and start the WPS process).
Step 3 - Allow up to 1 minute to configure. Once the Power/Status
LED stops blinking, you will be connected and your wireless
connection will be secure with WPA2.
D-Link DIR-510L User Manual
108
Section 6 - Connecting a Wireless Client
WindowsÂŽ 8
WPA/WPA2
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used.
To join an existing network, locate the wireless network icon in the taskbar, next to
the time display.
Wireless Icon
Clicking on this icon will display a list of wireless networks which are within connecting
proximity of your computer. Select the desired network by clicking on the network
name.
D-Link DIR-510L User Manual
109
Section 6 - Connecting a Wireless Client
You will then be prompted to enter the network security key (Wi-Fi password) for
the wireless network. Enter the password into the box and click Next.
If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also
press the WPS button on your router at this point to enable the WPS function.
When you have established a successful connection to a wireless network, the word
Connected will appear next to the name of the network to which you are connected.
D-Link DIR-510L User Manual
110
Section 6 - Connecting a Wireless Client
WindowsÂŽ 7
WPA/WPA2
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
Wireless Icon
2. The utility will display any available wireless networks in your area.
D-Link DIR-510L User Manual
111
Section 6 - Connecting a Wireless Client
3. Highlight the wireless connection with Wi-Fi name (SSID) you would
like to connect to and click the Connect button.
If you get a good signal but cannot access the Internet, check your
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
4. The following window appears while your computer tries to connect
to the router.
D-Link DIR-510L User Manual
112
Section 6 - Connecting a Wireless Client
5. Enter the same security key or passphrase (Wi-Fi password) that is
on your router and click Connect. You can also connect by pushing
the WPS button on the router.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct. The
key or passphrase must be exactly the same as on the wireless router.
D-Link DIR-510L User Manual
113
Section 6 - Connecting a Wireless Client
Windows VistaÂŽ
Windows VistaÂŽ users may use the built-in wireless utility. If you are using a third-party utility or WindowsÂŽ 2000, please refer to
the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey”
option similar to the Windows VistaÂŽ utility as seen below.
If you receive the Wireless Networks Detected pop-up, click on the
center of the window to access the utility.
or
Right-click on the wireless computer icon in your system tray (lowerright corner next to the time). Select Connect to a network.
The utility will display available wireless networks in your area. Select
a network (displayed using the SSID) and click the Connect button.
If you have a good signal but cannot access the Internet, check your
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
D-Link DIR-510L User Manual
114
Section 6 - Connecting a Wireless Client
WPA/WPA2
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Open the Windows VistaÂŽ Wireless Utility by right-clicking on the
wireless computer icon in your system tray (lower right corner of
screen). Select Connect to a network.
2. Highlight the wireless network (SSID) you would like to connect to
and click Connect.
D-Link DIR-510L User Manual
115
Section 6 - Connecting a Wireless Client
3. Enter the same security key or passphrase that is on your router
and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct. The
key or passphrase must be exactly the same as on the wireless router.
D-Link DIR-510L User Manual
116
Section 6 - Connecting a Wireless Client
WindowsÂŽ XP
WindowsÂŽ XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service
Pack 2 users. If you are using another company’s utility, please refer to the user manual of your wireless adapter for help with
connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lower-right
corner next to the time). Select View Available Wireless Networks.
The utility will display any available wireless networks in your area. Click
on a network (displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check your TCP/
IP settings for your wireless adapter. Refer to the Networking Basics
section in this manual for more information.
D-Link DIR-510L User Manual
117
Section 6 - Connecting a Wireless Client
WPA/WPA2
It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are
joining an existing network, you will need to know the WPA key being used.
1. Open the WindowsÂŽ XP Wireless Utility by right-clicking on the
wireless computer icon in your system tray (lower-right corner of
screen). Select View Available Wireless Networks.
2. Highlight the wireless network (SSID) you would like to connect to
and click Connect.
D-Link DIR-510L User Manual
118
Section 6 - Connecting a Wireless Client
3. The Wireless Network Connection box will appear. Enter the WPAPSK passphrase and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the WPA-PSK settings are correct.
The WPA-PSK passphrase must be exactly the same as on the wireless
router.
D-Link DIR-510L User Manual
119
Section 7 - Troubleshooting
Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of the DIR-510L. Read the
following descriptions if you are having problems. The examples below are illustrated in WindowsÂŽ XP. If you have a different
operating system, the screenshots on your computer will look similar to the following examples.
1. Why can’t I access the web-based configuration?
When entering http://dlinkrouter.local., you are not connecting to a website nor do you have to be connected to the Internet.
The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect
to the web-based utility.
Make sure you have an updated Java-enabled Web browser. We recommend the following:
t
 Microsoft Internet ExplorerÂŽ 8.0 or higher
t
 Mozilla FirefoxÂŽ 12.0 or higher
t
 Google™ Chrome 20 or higher
t
 SafariÂŽ 4.0 or higher
Verify wireless connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different
device if possible.
Disable any Internet security software running on the computer. Software firewalls such as ZoneAlarm, BlackICE, Sygate, Norton
Personal Firewall, and WindowsÂŽ XP firewall may block access to the configuration pages. Check the help files included with
your firewall software for more information on disabling or configuring it.
D-Link DIR-510L User Manual
120
Section 7 - Troubleshooting
Configure your Internet settings:
t
 Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the
button to restore the settings to their defaults.
t
 Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make
sure nothing is checked. Click OK.
t
 Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
t
 Close your Web browser (if open) and open it.
Access the web management. Open your Web browser and enter the IP address of your D-Link router in the address bar. This
should open the login page for your web management.
If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 60
seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the
factory defaults.
To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip
to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait
about 60 seconds to access the router. The default IP address is 192.168.0.1 or you may be able to reach the router at
http://dlinkrouter.local./ or http://dlinkrouter/. When logging in, leave the admin password box empty.
D-Link DIR-510L User Manual
121
Section 7 - Troubleshooting
3. Why can’t I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail,
we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc).
To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be
another computer, or a URL.
t
 Click on Start and then click Run.
t
 WindowsÂŽ 95, 98, and Me users type in command (WindowsÂŽ
NT, 2000, XP, VistaÂŽ, and 7 users type in cmd) and press Enter
(or click OK).
t
 Once the window opens, you’ll need to do a special ping.
Use the following syntax:
ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472
You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented
packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the
proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480).
Once you find your MTU, you can now configure your router with the proper MTU size.
D-Link DIR-510L User Manual
122
Section 7 - Troubleshooting
To change the MTU rate on your router follow the steps below:
t
 Open your browser, enter the IP address of your router (192.168.0.1, http://dlinkrouter.local. or http://dlinkrouter)
and click OK.
t
 Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the
device.
t
 Click on Setup and then click Manual Configure.
t
 To change the MTU enter the number in the MTU field and click Save Settings to save your settings.
t
 Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten.
D-Link DIR-510L User Manual
123
Section 7 - Troubleshooting
4. What happens if the power is cut during firmware upgrade?
If you can’t connect to your device or are having a problem connecting to the admin page, your router may be in recovery
mode. This is indicated by a steady blinking orange Power/Status LED.
To recover your device:
t
 Connect an Ethernet cable from the router to your computer.
t
 Open a Web browser and enter the IP of your router
(http://dlinkrouter or http://dlinkrouter.local. or 192.168.0.1)
and press Enter.
t
 The page will show D-link Router Recovery Mode. Click
Browse to select your current or a newer firmware.
t
 Click Open to load it.
t
 Click Upgrade.
t
 When the screen shows “Upgrade Successfully”, unplug the
Ethernet cable and power off and on the device.
t
 Please refer to “Connecting to Your DIR-510L” on page 14
to setup your router.
D-Link DIR-510L User Manual
124
Appendix A - Wireless Basics
Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless
connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link
wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able
to enjoy the freedom that wireless networking delivers.
A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of
wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops
and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently.
Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users.
Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop
systems support the same protocols as Ethernet adapter cards.
Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to
use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide
this link.
D-Link DIR-510L User Manual
125
Appendix A - Wireless Basics
What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio
frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network.
Why D-Link Wireless?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link
delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
How does wireless work?
Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But
wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area
to be able to connect your computer. There are two different types of wireless networks Wireless Local Area Network (WLAN),
and Wireless Personal Area Network (WPAN).
Wireless Local Area Network (WLAN)
In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has
a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point,
the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like
manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor
venues.
D-Link DIR-510L User Manual
126
Appendix A - Wireless Basics
Wireless Personal Area Network (WPAN)
Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to
30 feet away.
Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as
much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other
devices that operate on batteries.
Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business,
D-Link has a wireless solution for it.
Home
t
(JWFT
FWFSZPOF
BU
IPNF
CSPBECBOE
BDDFTT
t
4VSG
UIF
XFC 
DIFDL
FNBJM 
JOTUBOU
NFTTBHF 
FUD
t
(FUT
SJE
PG
UIF
DBCMFT
BSPVOE
UIF
IPVTF
t
4JNQMF
BOE
FBTZ
UP
VTF
Small Office and Home Office
t
4UBZ
PO
UPQ
PG
FWFSZUIJOH
BU
IPNF
BT
ZPV
XPVME
BU
PĂłDF
t
3FNPUFMZ
BDDFTT
ZPVS
PĂłDF
OFUXPSL
GSPN
IPNF
t
4IBSF
*OUFSOFU
DPOOFDUJPO
BOE
QSJOUFS
XJUI
NVMUJQMF
DPNQVUFST
t
/P
OFFE
UP
EFEJDBUF
PĂłDF
TQBDF
D-Link DIR-510L User Manual
127
Appendix A - Wireless Basics
Where is wireless used?
Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s becoming
so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public
places is usually called “hotspots”.
Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations
like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.
Wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing where to start.
That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.
Tips
Here are a few things to keep in mind, when you install a wireless network.
Centralize your router or Access Point
Make sure you place the router/access point in a centralized location within your network for the best performance. Try to
place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have
a two-story home, you may need a repeater to boost the signal to extend the range.
D-Link DIR-510L User Manual
128
Appendix A - Wireless Basics
Eliminate Interference
Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access
point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency.
Security
Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on
the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up.
Wireless Modes
There are basically two modes of networking:
t
 Infrastructure – All wireless clients will connect to an access point or wireless router.
t
 Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters
on each computer, such as two or more wireless network Cardbus adapters.
An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the
wireless router or access point.
An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc
mode to communicate.
D-Link DIR-510L User Manual
129
Appendix B - Networking Basics
Networking Basics
Check your IP Address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP
server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
In Windows:
Click on Start > Run.
In the run box type cmd and click OK. (WindowsÂŽ 7/VistaÂŽ users
type cmd in the Start Search box.)
At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and the default
gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation, security
settings, and the settings on your router. Some firewall software
programs may block a DHCP request on newly installed adapters.
D-Link DIR-510L User Manual
130
Appendix B - Networking Basics
Assign a Static IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
WindowsÂŽ 7 -
Click on Start > Control Panel > Network and Internet > Network and Sharing Center.
Windows VistaÂŽ - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network
Connections.
WindowsÂŽ XP -
Click on Start > Control Panel > Network Connections.
WindowsÂŽ 2000 - From the desktop, right-click My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same
subnet as your network or the LAN IP address on your router.
D-Link DIR-510L User Manual
131
Appendix B - Networking Basics
Example: If the router´s LAN IP address is 192.168.0.1 or http://dlinkrouter.local., make your IP address 192.168.0.X where X is
a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway
the same as the LAN IP address of your router (I.E. 192.168.0.1 or http://dlinkrouter.local.).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1 or http://dlinkrouter.local.). The Secondary DNS
is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DIR-510L User Manual
132
Appendix C - Technical Specifications
Technical Specifications
Standards
t
IEEE 802.11b/g/n
t
IEEE 802.11a/n
t
IEEE 802.11ac
t
IEEE 802.3
t
IEEE 802.3u
t
IEEE 802.3x
Internet Modes
t
Broadband Router Mode
t
Mobile Router Mode
t
Wi-Fi Hotspot Mode
Wireless Frequency Range 1
t
802.11b/g/n: 2.4 GHz to 2.497 GHz
t
802.11a/n/ac: 5.15 GHz to 5.85 GHz
Security
t
Wi-Fi Protected Access (WPA/WPA2)
t
WPS 2.0 (Wi-Fi Protected Setup)
Advanced Features
t
mydlink SharePort app for iPhoneÂŽ, iPadÂŽ, iPod touchÂŽ and Android
t
SharePort Mobile app for Windows 8/RT
t
D-Link Intelligent QoS Technology
t
VPN passthrough
t
Guest Zone Support
t
UPnP™ (DLNA) Support
t
SharePort Web Access Support
t
IPv6
D-Link DIR-510L User Manual
Transmitter Output Power
IEEE 802.11b:
t
17 dBm at 1, 2, 5.5, 11 Mbps
IEEE 802.11g:
t
18 dBm at 6 to 18 Mbps
t
16 dBm at 24 to 36 Mbps
t
14 dBm at 48 to 54 Mbps
IEEE 802.11n (2.4 GHz):
t

E#N
BU
.$4
UP
.$4
 

t

E#N
BU
.$4
UP
.$4
 

t

E#N
BU
.$4
UP
.$4

t

E#N
BU
.$4
UP
.$4
t

E#N
BU
.$4
BOE
.$4
t

E#N
BU
.$4
UP
.$4
IEEE 802.11n (5 GHz):
t

E#N
BU
.$4
UP
.$4
 

t

E#N
BU
.$4
UP
.$4
 

t

E#N
BU
.$4
UP
.$4

t

E#N
BU
.$4
UP
.$4
t

E#N
BU
.$4
BOE
.$4
t

E#N
BU
.$4
UP
.$4
IEEE 802.11ac (5 GHz):
t

E#N
BU
.$4
UP
.$4
 

t

E#N
BU
.$4
UP
.$4
 

t

E#N
BU
.$4
UP
.$4

t

E#N
BU
.$4
UP
.$4
t

E#N
BU
.$4
BOE
.$4
t

E#N
BU
.$4
UP
.$4
Receiver Sensitivity1
IEEE 802.11b:
t

E#N
BU

.CQT


t

E#N
BU

.CQT

t

E#N
BU

.CQT
t

E#N
BU

.CQT
IEEE 802.11g:
t

E#N
BU

.CQT


t

E#N
BU

.CQT
133
Appendix C - Technical Specifications
t

E#N
BU

.CQT

t

E#N
BU

.CQT

t

E#N
BU

.CQT

t

E#N
BU

.CQT
t

E#N
BU

.CQT
t

E#N
BU

.CQT
IEEE 802.11n HT20(MHz):
t
-82 dBm at MCS0, MCS8
t
-77 dBm at MCS2, MCS10
t
-70 dBm at MCS4, MCS12
t
-65 dBm at MCS6, MCS14
¡ -79 dBm at MCS1, MCS9
¡ -74 dBm at MCS3, MCS11
¡ -66 dBm at MCS5, MCS13
¡ -64 dBm at MCS7, MCS15
IEEE 802.11n HT40(MHz):
t
-79 dBm at MCS0, MCS8
t
-74 dBm at MCS2, MCS10
t
-67 dBm at MCS4, MCS12
t
-62 dBm at MCS6, MCS14
¡ -76 dBm at MCS1, MCS9
¡ -71 dBm at MCS3, MCS11
¡ -63 dBm at MCS5, MCS13
¡ -61 dBm at MCS7, MCS15
USB Interface
t
USB 2.0 Type A
t
Micro USB-B
Storage Temperature
t
-20 to 65 °C (-4 to 149 °F)
Operating Humidity
t
10% to 90% non-condensing
Storage Humidity
t
5% to 95% non-condensing
Certifications
t
FCC/CE/cUL
Dimensions
t
140 x 59 x 16 mm (5.51 x 2.32 x 0.63 inches)
Weight
t
154 g (0.34 lbs)
mydlink SharePort App Supported File Formats for iPhone, iPad,
iPod touch, and Android
Video:
Embedded Battery
t
.mp4,
.mov, .m4v
t
4000 mAh (Li-ion) power capacity1
Music:
t
OCP, OVP, OTP, SCP protection
t
.mp3, .wav, .m4a
Image:
Electrical
t
.jpg,
.bmp,
.png
t
Power Input: Max 1800 mA (standard adapter); 1000 mA (USB 2.0 port)
Document:
t
Max Operating Voltage: 5 V
t
Microsoft
Office formats, .pdf
t
Max Power Consumption: 14 W
t
USB 1 A Output: Max 1000 mA
t
USB 0.5 A Output: Max 500 mA
Operating Temperature
t
0 to 40 °C (32 to 104 °F)
Actual usable capacity may vary depending on charging conditions.
D-Link DIR-510L User Manual
134
Appendix D - GPL Code Statement
GPL Code Statement
This D-Link product includes software code developed by third parties, including software code subject to the GNU General
Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and
information on obtaining access to the GPL code and LGPL code used in this product, are available to you at:
http://tsd.dlink.com.tw/GPL.asp
The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights
of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.
WRITTEN OFFER FOR GPL AND LGPL SOURCE CODE
Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request
via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover
shipping and media charges as allowed under the GPL and LGPL.
Please direct all inquiries to:
Email: GPLCODE@DLink.com
Snail Mail:
Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
17595 Mt. Herrmann Street
Fountain Valley, CA 92708
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc.  Everyone is permitted to copy and distribute verbatim
copies of this license document, but changing it is not allowed.
D-Link DIR-510L User Manual
135
Appendix D - GPL Code Statement
Preamble
The GNU General Public License is a free, copyleft license for software and other kinds of works.
The licenses for most software and other practical works are designed to take away your freedom to share and change the
works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions
of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General
Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make
sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source
code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know
you can do these things.
To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore,
you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the
freedom of others.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the
same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show
them these terms so they know their rights.
Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or
modify it.
For the developers’ and authors’ protection, the GPL clearly explains that there is no warranty for this free software. For both
users’ and authors’ sake, the GPL requires that modified versions be marked as changed, so that their problems will not be
attributed erroneously to authors of previous versions.
Some devices are designed to deny users access to install or run modified versions of the software inside them, although
the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users’ freedom to change the
software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it
is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such
problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of
the GPL, as needed to protect the freedom of users.
D-Link DIR-510L User Manual
136
Appendix D - GPL Code Statement
Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development
and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents
applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used
to render the program non-free.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS
0. Definitions.
“This License” refers to version 3 of the GNU General Public License.
“Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks.
“The Program” refers to any copyrightable work licensed under this License. Each licensee is addressed as “you”. “Licensees”
and “recipients” may be individuals or organizations.
To “modify” a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than
the making of an exact copy. The resulting work is called a “modified version” of the earlier work or a work “based on” the
earlier work.
A “covered work” means either the unmodified Program or a work based on the Program.
To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liable
for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation
includes copying, distribution (with or without modification), making available to the public, and in some countries other
activities as well.
To “convey” a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with
a user through a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently
visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work
(except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a
copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list
meets this criterion.
D-Link DIR-510L User Manual
137
Appendix D - GPL Code Statement
1. Source Code.
The “source code” for a work means the preferred form of the work for making modifications to it. “Object code” means any
non-source form of a work.
A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the
case of interfaces specified for a particular programming language, one that is widely used among developers working in that
language.
The “System Libraries” of an executable work include anything, other than the work as a whole, that (a) is included in the
normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable
use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available
to the public in source code form. A “Major Component”, in this context, means a major essential component (kernel, window
system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce
the work, or an object code interpreter used to run it.
The “Corresponding Source” for a work in object code form means all the source code needed to generate, install, and (for
an executable work) run the object code and to modify the work, including scripts to control those activities. However, it
does not include the work’s System Libraries, or general-purpose tools or generally available free programs which are used
unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes
interface definition files associated with source files for the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow
between those subprograms and other parts of the work.
The Corresponding Source need not include anything that users can regenerate automatically from other parts of the
Corresponding Source.
The Corresponding Source for a work in source code form is that same work.
D-Link DIR-510L User Manual
138
Appendix D - GPL Code Statement
2. Basic Permissions.
All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the
stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The
output from running a covered work is covered by this License only if the output, given its content, constitutes a covered
work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications
exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this
License in conveying all material for which you do not control copyright. Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any
copies of your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed;
section 10 makes it unnecessary.
3. Protecting Users’ Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations
under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting
circumvention of such measures.
When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent
such circumvention
is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit
operation or modification of the work as a means of enforcing, against the work’s users, your or third parties’ legal rights to
forbid circumvention of technological measures.
D-Link DIR-510L User Manual
139
Appendix D - GPL Code Statement
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously
and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and
any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any
warranty; and give all recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a
fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source
code under the terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified it, and giving a relevant date.
b) The work must carry prominent notices stating that it is released under this License and any conditions added
under section 7. This requirement modifies the requirement in section 4 to “keep intact all notices”.
c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a
copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of
the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the
work in any other way, but it does not invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program
has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so.
A compilation of a covered work with other separate and independent works, which are not by their nature extensions of
the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or
distribution medium, is called an “aggregate” if the compilation and its resulting copyright are not used to limit the access or
legal rights of the compilation’s users beyond what the individual works permit. Inclusion of a covered work in an aggregate
does not cause this License to apply to the other parts of the aggregate.
D-Link DIR-510L User Manual
140
Appendix D - GPL Code Statement
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License, in one of these ways:
a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium),
accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software
interchange.
b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium),
accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or
customer support for that product model, to give anyone who possesses the object code either (1) a copy
of the Corresponding Source for all the software in the product that is covered by this License, on a durable
physical medium customarily used for software interchange, for a price no more than your reasonable cost of
physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network
server at no charge.
c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding
Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object
code with such an offer, in accord with subsection 6b.
d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent
access to the Corresponding Source in the same way through the same place at no further charge. You need
not require recipients to copy the Corresponding Source along with the object code. If the place to copy the
object code is a network server, the Corresponding Source may be on a different server (operated by you or
a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the
object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding
Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object
code and Corresponding Source of the work are being offered to the general public at no charge under
subsection 6d.
A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System
Library, need not be included in conveying the object code work.
D-Link DIR-510L User Manual
141
Appendix D - GPL Code Statement
A “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for
personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining
whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product
received by a particular user, “normally used” refers to a typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A
product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer
uses, unless such uses represent the only significant mode of use of the product.
“Installation Information” for a User Product means any methods, procedures, authorization keys, or other information required
to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding
Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case
prevented or interfered with solely because modification has been made.
If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying
occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in
perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under
this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any
third party retains the ability to install modified object code on the User Product (for example, the work has been installed in
ROM).
The requirement to provide Installation Information does not include a requirement to continue to provide support service,
warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has
been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects
the operation of the network or violates the rules and protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is
publicly documented (and with an implementation available to the public in source code form), and must require no special
password or key for unpacking, reading or copying.
D-Link DIR-510L User Manual
142
Appendix D - GPL Code Statement
7. Additional Terms.
“Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its
conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in
this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program,
that part may be used separately under those permissions, but the entire Program remains governed by this License without
regard to the additional permissions.
When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or
from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify
the work). You may place additional permissions on material, added by you to a covered work, for which you have or can give
appropriate copyright permission.
Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the
copyright holders of that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the
Appropriate Legal Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material
be marked in reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or authors of the material; or
e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or
f ) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or
modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these
contractual assumptions directly impose on those licensors and authors.
D-Link DIR-510L User Manual
143
Appendix D - GPL Code Statement
All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program
as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a
further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing
or conveying under this License, you may add to a covered work material governed by the terms of that license document,
provided that the further restriction does not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as
exceptions; the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to
propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses
granted under the third paragraph of section 11).
However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the
copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work)
from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.
Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights
D-Link DIR-510L User Manual
144
Appendix D - GPL Code Statement
from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to
receive new licenses for the same material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a
covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not
require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered
work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered
work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify
and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this
License.
An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing
an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party
to that transaction who receives a copy of the work also receives whatever licenses to the work the party’s predecessor in
interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work
from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example,
you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not
initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making,
using, selling, offering for sale, or importing the Program or any portion of it.
D-Link DIR-510L User Manual
145
Appendix D - GPL Code Statement
11. Patents.
A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is
based. The work thus licensed is called the contributor’s “contributor version”.
A contributor’s “essential patent claims” are all patent claims owned or controlled by the contributor, whether already acquired
or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its
contributor version, but do not include claims that would be infringed only as a consequence of further modification of
the contributor version. For purposes of this definition, “control” includes the right to grant patent sublicenses in a manner
consistent with the requirements of this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor’s essential patent
claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version.
In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not
to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To
“grant” such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the
party.
If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available
for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other
readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive
yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements
of this License, to extend the patent license to downstream recipients. “Knowingly relying” means you have actual knowledge
that, but for the patent license, your conveying the covered work in a country, or your recipient’s use of the covered work in a
country, would infringe one or more identifiable patents in that country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance
of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use,
propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended
to all recipients of the covered work and works based on it.
D-Link DIR-510L User Manual
146
Appendix D - GPL Code Statement
A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not
convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software,
under which you make payment to the third party based on the extent of your activity of conveying the work, and under which
the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a)
in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in
connection with specific products or compilations that contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that
may otherwise be available to you under applicable patent law.
12. No Surrender of Others’ Freedom.
If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not
convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to
whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely
from conveying the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work
licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting
work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of
the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination
as such.
D-Link DIR-510L User Manual
147
Appendix D - GPL Code Statement
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time.
Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU
General Public License “or any later version” applies to it, you have the option of following the terms and conditions either of
that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify
a version number of the GNU General Public License, you may choose any version ever published by the Free Software
Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can
be used, that proxy’s public statement of acceptance of a version permanently authorizes you to choose that version for the
Program.
Later license versions may give you additional or different permissions. However, no additional obligations are imposed on
any author or copyright holder as a result of your choosing to follow a later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM“AS IS”WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS
WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY
OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO
USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
D-Link DIR-510L User Manual
148
Appendix D - GPL Code Statement
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their
terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection
with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee.
D-Link DIR-510L User Manual
149
Appendix E - Safety Statements
Safety Statements
CE Mark Warning:
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take
adequate measures.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the Instructions , may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
1. This device complies with Part 15 of the FCC rules/Industry Canada RSS 210 standard . Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
3. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate
the equipment.
IMPORTANT NOTE : (For Mobile Device Configuration)
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
D-Link DIR-510L User Manual
150
Appendix E - Safety Statements
operated with minimum distance 20 cm between the radiator & your body.
IMPORTANT NOTE : (For Portable Device Configuration)
Federal Communication Commission (FCC) Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in
ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods
and procedures specified in OET Bulletin 65 Supplement C. SAR has been evaluated at 10 mm.
This Class [*] digital apparatus complies with Canadian ICES-003.
Cet appareil numĂŠrique de la classe [*] est conforme Ă  la norme NMB-003 du Canada.
Industry Canada Caution:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) il ne doit pas produire de brouillage et
(2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu,
mĂŞme si ce brouillage est susceptible de compromettre le fomctionnement du dispositif.
IC IMPORTANT NOTE : (For Mobile Device Configuration)
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20 cm
between the radiator & your body.
IC IMPORTANT NOTE : (For Portable Device Configuration)
IC Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in
IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528. This equipment
should be installed and operated with minimum distance 1 cm between the radiator & your body. SAR has been evaluated at 10 mm.
D-Link DIR-510L User Manual
151
Appendix E - Safety Statements
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
En vertu de la réglementation de l’industrie du Canada, cet émetteur de radio ne peuvent fonctionner en utilisant une antenne d’un type
et maximum (ou moins) Gain approuvé pour l’émetteur par Industrie Canada. Pour réduire risque d’interférence aux autres utilisateurs,
le type d’antenne et son gain doivent être choisis de sorte que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui
est nĂŠcessaire pour la rĂŠussite de communication.
旬抬)8*!Ỷ≇䌯暣㲊廣⮬⿏暣㨇䭉䎮彎㱽
䫔⋩Ḵ㡅
䴻✳⺷娵嫱⎰㟤ᷳỶ≇澯⮬柣暣㨇炻朆䴻姙⎗炻℔⎠ˣ⓮嘇ㆾἧ䓐侭⛯澵⼿㑭冒嬲潏柣澯ˣ≈⣏≇澯ㆾ嬲潏⍇姕妰ᷳ䈡⿏⍲≇傥ˤ
䫔⋩⚃㡅
Ỷ≇澯⮬柣暣㨇ᷳἧ䓐澵⼿⼙枧梃凒⬱ℐ⍲⸚㒦⎰㱽忂ᾉ烊䴻䘤䎦㚱⸚㒦䎦尉㗪炻ㅱ㓡┬军䃉⸚㒦㗪㕡⼿两临ἧ䓐ˤ⇵枭⎰㱽忂ᾉ炻㊯ὅ
暣ᾉ㱽夷⭂ἄ㤕ᷳ䃉䶂暣忂ᾉˤỶ≇澯⮬柣暣㨇枰⽵⍿⎰㱽忂ᾉㆾⶍ㤕ˣ䥹⬠⍲慓瀏䓐暣㲊灕⮬⿏暣㨇姕⁁ᷳ⸚㒦ˤ
D-Link DIR-510L User Manual
152

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-702
Create Date                     : 2013:12:18 12:25:54+08:00
Metadata Date                   : 2013:12:19 23:56:26+08:00
Modify Date                     : 2013:12:19 23:56:26+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:1c63b802-fcfa-4c68-a04e-624fef4fac28
Original Document ID            : adobe:docid:indd:5e8875e4-12a0-11df-9c31-b8a2ca951b65
Document ID                     : xmp.id:4BF8C4348667E311BEBDF164A7E317A5
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:4AF8C4348667E311BEBDF164A7E317A5
Derived From Document ID        : xmp.did:B08C5D298567E311BEBDF164A7E317A5
Derived From Original Document ID: adobe:docid:indd:5e8875e4-12a0-11df-9c31-b8a2ca951b65
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2013:12:18 09:47:07+08:00
Format                          : application/pdf
Title                           : DIR-510L_A1_Manual_V1.01(HQ).pdf
Creator                         : 1015
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Trapped                         : False
Page Count                      : 156
Author                          : 1015

EXIF Metadata provided by EXIF.tools