D Link IR516A1 Wireless AC Router User Manual DIR 516 Manual

D Link Corporation Wireless AC Router DIR 516 Manual

UserManual.wiki >

IR516A1 User Manual

User Manual.pdf

Version 1.0 | December 12, 2013DIR-516User Manual

iiD-Link DIR-516 User ManualTable of ContentsPreface ................................................................................. iManual Revisions ........................................................................... iTrademarks ...................................................................................... iProduct Overview .............................................................. 1Package Contents ......................................................................... 1System Requirements ................................................................. 2Introduction ................................................................................... 3Features ............................................................................................ 4Hardware Overview ..................................................................... 5Front/Side ................................................................................5Bottom ......................................................................................6Operation Modes ..........................................................................7Router Mode ...........................................................................8Access Point Mode ............................................................... 9Wireless Installation Considerations ....................................10Setting Up With a Web Browser ......................................11Router Mode .........................................................................12Access Point Mode .............................................................12Router Mode ................................................................................13Initial Setup Wizard ............................................................13Manual Conguration .......................................................15Setup ..................................................................................16Wizard ..........................................................................16Local Network ...........................................................20Internet Setup ...........................................................24Wireless..............................................................................27Wireless Basics ...........................................................27Wi-Fi Protected (WPS) Setup ................................30Advanced Wireless ...................................................31Advanced ..........................................................................33Access Control List ...................................................33Port Triggering ..........................................................34DMZ ..............................................................................35URL Block ....................................................................36Dynamic DNS ............................................................37QoS ................................................................................ 38UPnP .............................................................................40Virtual Server .............................................................41Maintenance .................................................................... 43Reboot .........................................................................43Firmware Upgrade ...................................................44Backup/Restore.........................................................45Admin ...........................................................................46Time and Date ...........................................................47Status ..................................................................................48Device Info ..................................................................48Active Client Table ...................................................49Statistics ......................................................................50Help.....................................................................................51Access Point Mode .....................................................................52Manual Conguration .......................................................52Table of Contents

iiiD-Link DIR-516 User ManualTable of ContentsSetup ..................................................................................53Local Network ...........................................................53Wireless..............................................................................54Wireless Basics ...........................................................54Wi-Fi Protected (WPS) Setup ................................57Advanced Wireless ...................................................58Maintenance .................................................................... 60Reboot .........................................................................60Firmware Upgrade ...................................................61Backup/Restore.........................................................62Admin ...........................................................................63Time and Date ...........................................................64Status ..................................................................................65Device Info ..................................................................65Active Client Table ...................................................66Statistics ......................................................................67Help.....................................................................................68Connecting a Wireless Client ..........................................69WPS Button ...................................................................................69Windows® 8 ...................................................................................70WPA/WPA2 ............................................................................70Windows® 7 ...................................................................................72WPA/WPA2 ............................................................................72WPS ..........................................................................................75DIR-516 ...................................................................................76Windows Vista® ............................................................................79WPA/WPA2 ............................................................................80WPS/WCN 2.0 .......................................................................82Windows® XP ................................................................................83WPA/WPA2 ............................................................................84Troubleshooting ..............................................................86Wireless Basics .................................................................90What is Wireless? .........................................................................91Tips ...................................................................................................93Networking Basics ...........................................................94Statically Assign an IP address ...............................................95Technical Specications ..................................................96Safety Statements ...........................................................97

1D-Link DIR-516 User ManualSection 1 - Product OverviewPackage ContentsDIR-516 Quick Installation GuideIf any of the above items are missing from your package, please contact your reseller.Product Overview

2D-Link DIR-516 User ManualSection 1 - Product OverviewNetwork Requirements• An Ethernet-based Cable or DSL modem• IEEE 802.11ac, 802.11a, 802.11n or 802.11g wireless clients• 10/100 EthernetWeb-based Conguration Utility RequirementsComputer with the following:• Windows®, Macintosh, or Linux-based operating system • An installed Ethernet adapterBrowser Requirements:• Microsoft Internet Explorer® v7, Mozilla® Firefox® v9.0,Google® Chrome 16.0, or Safari® v4 or higher versionWindows® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version.System Requirements

3D-Link DIR-516 User ManualSection 1 - Product OverviewIntroductionTOTAL COVERAGEProvides greater wireless signal rates even at farther distances for incredible wireless coverage.ULTIMATE PERFORMANCEThe D-Link DIR-516 lets you create a secure wireless network to share photos, les, music, video, printers, and network storage throughout your home. Connect the DIR-516 router to a cable or DSL modem and share your high-speed Internet access with everyone on the network. TOTAL NETWORK SECURITYThe DIR-516 router supports all of the latest wireless security features to prevent unauthorized access, be it from over the wireless network or from the Internet. Support for WPA/WPA2 standards ensure that you’ll be able to use the best possible encryption method, regardless of your client devices. In addition, this router utilizes dual active rewalls (SPI and NAT) to prevent potential attacks from across the Internet.* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and draft 802.11ac specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.

4D-Link DIR-516 User ManualSection 1 - Product Overview• Faster Wireless Networking - The DIR-516 provides an up to 150Mbps wireless connection in 2.4GHz band,433Mbps wireless connection in 5GHz with other 802.11ac and draft 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio.• Portable and Easy to Use - Simply plug the DIR-516 into a power outlet at home or abroad to create an instant wireless network wherever you are.• Compatible with 802.11a/g/n Devices - The DIR-516 is still fully compatible with the IEEE 802.11a, 802.11gand 802.11n, so it can connect with existing 802.11a, 802.11g and 802.11n PCI, USB, and Cardbus adapters.• User-friendly Setup Wizard - Through its easy-to-use web-based user interface, the DIR-516 lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company’s server. Congure your router to your specic settings within minutes.* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and draft 802.11ac specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.Features

5D-Link DIR-516 User ManualSection 1 - Product OverviewHardware OverviewFront/Side1Power (PWR LED) A solid green light indicates a proper connection to the power supply. The light will blink when connectiong to a device through WPS.2Internet (ISP) LEd A solid light indicates connection on the Internet port. 3Selector Switch Slide this switch to select between 2.4GHz and 5GHz4WPS Button Press this to activate Wi-Fi Protected Setup(WPS) to connect other wireless devices automatically.5Reset Button Pressing the Reset button for 5 seconds restores the router to its original factory default settings.13452

6D-Link DIR-516 User ManualSection 1 - Product OverviewHardware OverviewBottom1Ethernet Port The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem.1

7D-Link DIR-516 User ManualSection 1 - Product OverviewOperation ModesDepending on how you want to use your DIR-516 will determine which mode you use. The following pages describe each mode to help you gure out which one to use.• Router Mode: page 8• Access Point Mode: page 9

8D-Link DIR-516 User ManualSection 1 - Product OverviewRouter ModeIn Router Mode, the DIR-516 connects to your cable modem, DSL modem, or other Internet source and shares your Internet connection with your devices wirelessly, providing Internet access for an entire home or oce.Router ModeCable/DSL Modem Wireless DevicesInternet

9D-Link DIR-516 User ManualSection 1 - Product OverviewAccess Point ModeIn Access Point Mode, the DIR-516 connects your wireless devices together, but does not provide routing functionality. It also allows a connected wired device to connect to your other devices wirelessly. This can be useful if you already have an existing Internet router that does not have built-in wireless capabilities. You can also use this to create a private wireless network without Internet access so that your devices can securely connect to one another without being exposed to the Internet or other computers.Access Point ModeRouter (optional)Wireless DevicesInternet (optional)

10D-Link DIR-516 User ManualSection 1 - Product OverviewWireless Installation ConsiderationsThe D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building materials make a dierence. A solid metal door or aluminum studs may have a negative eect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.

11D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeThis section will show you how to congure your new D-Link wireless router using the web-based conguration utility.To access the conguration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1).Enter admin in the User Name eld. By default, the password should be left blank.If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.Router Mode

12D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeThis section will allow you to change the local network settings of the router and to congure the DHCP settings.Network SettingsUse this section to congure the router’s local network settings.Use this section to congure the DIR-516’s built-in DHCP server settings.Use this section to add a new DHCP Static IP conguration.Displays information about the devices that have a static DHCP assigned from the DIR-516. The information includes the IP Address and MAC Address. You can delete or edit an existing static IP conguration in the table.LAN Interface:DHCP Server Settings:DHCP Static IP Conguration:DHCP Static IP Table:

13D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeEnter the IP address of the router. The default IP address is 192.168.0.1.If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to get back into the conguration utility.Enter the subnet mask. The default subnet mask is 255.255.255.0.IP Address:Subnet Mask:Click the Apply Changes button to save any changes made.

14D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeDHCP stands for Dynamic Host Control Protocol. The DIR-516 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DIR-516. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.Enable the DHCP Server option in the pulldown menu to enable the DHCP server on your router. Choose None to disable this function.Enter the starting and ending IP addresses for the DHCP server’s IP assignment.Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conict. The maximum length of time for the IP address lease. Enter the Lease time in minutes.Enter the IP address of the rst DNS Server. Enter the IP address of the second DNS Server, if there is one.DHCP Server:DHCP IP Address Range:Lease Time:DNS Server 1:DNS Server 2:When you have finished configuring the new DHCP Server Settings, click the Save Setting button.

15D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeIf you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within the DHCP IP address range.Enter the IP address you want to assign to the computer or device. This IP address must be within the DHCP IP address range.Enter the MAC address of the computer or device.IP Address:MAC Address:When you have nished conguring the new DHCP reservation, click the Add button to activate your reservation. It will then be displayed in the DHCP Static IP Table below.The DHCP Static IP Table displays the IP reservations that have been created. To make any changes, select a reservation in the table by clicking the circle next to it and click Update. To delete a reservation, select a reservation and click Delete Selected.

16D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeInternet SetupThis section allows you to manually congure your router’s Internet WAN settings.Select the WAN interface type.If you choose DHCP, please congure the following elds:Enter the host name of the router.Enter the MTU size.Click this if the DNS is to be obtained automatically.Click this to specify a DNS server. You can enter up to two DNS servers.Select the MAC address to be used for the connection. Select Default MAC to use the router’s MAC address. Select MAC from PC to copy your PC’s MAC address, or select MAC Manual to manually enter a MAC address in the eld provided. WAN Access Type:Host Name:MTU Size:Attain DNS Automatically:Set DNS Manually:MAC Clone When you have nished conguring the WAN settings, click the Save Settings button.

17D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeSelect Static IP from the drop-down menu. Enter the static IP address which was provided to you by your Internet Service Provider (ISP).Enter the subnet provided by your ISP.Enter the default gateway provided by your ISP.Enter the Maximum Transmission Unit size. The default value is 1500.Enter the primary DNS server address provided by your ISP.Enter the secondary DNS server address provided by your ISP.Select the MAC address to be used for the connection. Select Default MAC to use the router’s MAC address. Select MAC from PC to copy your PC’s MAC address, or select MAC Manual to manually enter a MAC address in the eld provided. Click Save Settings to save the current conguration, or click Don’t Save Settings to discard. WAN Access Type:IP Address:Subnet Mask:Default Gateway:MTU Size:DNS Server 1:DNS Server 2:MAC Clone:If you choose Static IP, please congure the following elds;

18D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeIf you choose PPPoE, please congure the following elds:When you have nished conguring the WAN settings, click the Save Settings button.Select PPPoE from the drop-down menu. Enter the user name provided to you by your ISP.Enter the password provided to you by your ISP.Enter the service name if your ISP provided you with one, otherwise leave this eld empty.Enter the Maximum Transmission Unit size. The default value is 1492.If your ISP or network administrator requires you to have a static IP address for your connection, enter it here. Select Continuous, Connect on Demand, or Manual as the connection type from the drop-down menu. If you select Manual, the connect and disconnect buttons will be available. Click this if the DNS is to be obtained automatically.Click this to specify a DNS server. You can enter up to two DNS servers.Select the MAC address to be used for the connection. Select Default MAC to use the router’s MAC address. Select MAC from PC to copy your PC’s MAC address, or select MAC Manual to manually enter a MAC address in the eld provided. WAN Access Type:User Name:Password:Service Name:MTU Size:Static IP Address:Connection Type:Attain DNS Automatically:Set DNS Manually:MAC Clone:

19D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router Mode• Wireless SettingsWirelessUse this to disable NAT on the router and turn it into an Access Point.Enable SSID broadcast if you want the router to transmit its SSID publicly so other wireless devices can discover it.Enter the SSID name you want to use for your wireless network.Use the dropdown menu to specify the wireless mode.Use the dropdown menu to select the wireless channel.Use the dropdown menu to select the channel bandwidth. If you selected the 802.11ac, 802.11n, 802.11 b/g, or 802.11 b/g/n wireless modes, the available options are 20 MHz and 20/40 MHz. 20/40/80MHz(Auto) For the others, 20 MHz is the only option.Select a wireless security encryption option. You can also choose to not use one by selecting None, but this is not recommended.Enabled Access Point Mode:Enable Wireless:Name (SSID):Mode:Channel:Band Width:Security Options:This page allows you to congure the wireless LAN settings. You can also congure the wireless encryption and wireless network parameters.

20D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeWireless security helps to prevent unauthorized users from accessing your wireless network, or seeing data being passed between the router and wireless clients. The DIR-516 supports two popular wireless security protocols, you should select a protocol based on the wireless clients which will be accessing your network. Wired Equivalent Privacy (WEP)This is an older form of wireless security and should only be used if your wireless clients do not support the newer WPA or WPA2 protocols. Select WEP from the drop-down menu. Select either Automatic or Shared Key as the authentication type. Select the encryption strength from the drop-down menu. 64-bit - A 64-bit key comprises a string of 10 hexadecimal characters, or 5 ASCII characters. 128-bit - A 128-bit key comprises a string of 26 hexadecimal characters, or 13 ASCII characters. You can predetermine up to 4 WEP keys. Select the WEP key you wish to use by clicking on the radio buttons next to the keys. Select whether you wish to use HEX or ASCII characters in your key using the drop-down menu. Enter the desired key in the eld provided. Click Apply to save the current settings. Security Options:Authentication Type:Encryption Strength:Key 1-4:

21D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeWi-Fi Protected Access (WPA/WPA2)This is a newer and more secure protocol for wireless security. It uses a cipher combined with a pre-shared key (password) to encrypt data being sent over the wireless network. It is recommended that you use this security method if it is supported by your wireless clients. Select WPA-PSK/WPA2-PSK AES from the drop-down menu. Enter a pre-shared key (password) to secure your wireless network. Wireless clients will require this password in order to connect to your network. It is recommended that you make a record of this password for future reference. Click Save Settings to save the current settings. Security Options:Pre-Shared Key:

22D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeWi-Fi Protected (WPS) SetupWi-Fi Protected Setup (WPS) System is a simplied method for securely connecting new devices to your network. The process as easy as pressing a button (the Push-Button Connection method) or correctly entering the 8-digit code (the PIN method).If you wish to use the Push-Button Connection (PBC) method, simply press the WPS button on the side of the router. The power LED will begin to ash. Within 120 seconds, press the WPS button on the device that you wish to connect. The power LED will turn solid green if the connection is successful. To connect using the PIN method, click Next to begin the WPS setup process. Enter the PIN for the wireless NIC and click Start PIN. If successful, you will then be taken to another screen and a message will tell you to run WPS in the client device within 2 minutes.

23D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeFirmwareThis page allows you to upgrade the rmware of the router. If you plan to install new rmware, make sure the rmware you want to use is on the local hard drive of the computer. Please check the D-Link support site for rmware updates at http://support.dlink.com. You can download rmware upgrades to your hard drive from the D-Link support site.After you have downloaded the new rmware, clickBrowse to locate the rmware update on your harddrive.If you want to reset the router’s settings to their default values, then check the Automatically reset default after rmware upgraded box.Select File:Click the Upload button to upload a le to the router after you have selected it.

24D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeSystemThis page allows you to save the router’s current conguration le onto your computer’s hard drive or load a saved le from your hard drive.Click the Save Settings to File button to download the current conguration settings as a le onto your hard drive. To load a previously saved settings le, click the Browse button to locate the le on your hard drive, then click the Upload button.

25D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeAdminRetype the new password.Conrm Password:This page allows you to add a user account to the router’s web server. You can also delete or modify existing accounts.To delete an existing account, click the Select tab next to the user account in the table and then click the Delete button.

26D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeDisplays the router’s time and rmware version.Displays the MAC address and the private (local) IP settings for the router.Displays the wireless MAC address and your wirelesssettings such as SSID and Channel.Displays the MAC address and the public IP settings forthe router.System:Device InfoThis page displays the current status and basic settings of the router. StatusLAN Conguration:WLAN Conguration:WAN Conguration:Click the Refresh button to view the most current information.

27D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeWirelessThis table displays all active wired clients.This table displays all active wireless clients.Active Wired Client Table:Active Wireless Client Table:This page displays lists of all wired and wireless clients. The IP address and MAC address of each client is displayed in the tables.

28D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeStatisticsThis page displays the statistics for packets that have been transmitted and received on the network on the router’s WAN and LAN ports, and wireless bands. Click the Refresh button to refresh the router’s trac statistics.

29D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Router ModeSupportThis section provides an explanation of each conguration or setting for the DIR-516. Click on the links to be taken to the help text for that particular section of router’s setup.

30D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Access Point ModeThis section will show you how to congure your new D-Link wireless router using the web-based conguration utility.To access the conguration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.50).Enter admin in the User Name eld. Leave the password blank as the default password. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance.Manual CongurationAccess Point Mode

31D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Access Point ModeThis section will allow you to change the local network settings of the access point.Local NetworkEnter the IP address of the access point.Enter the subnet mask of the access point.IP Address:Subnet Mask:Setup

32D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Access Point ModeWireless SettingsWirelessUse this to disable NAT on the router and turn it into an Access Point. Enable SSID broadcast if you want the router to transmit its SSID publicly so other wireless devices can discover it.Enable wireless isolation to prevent connected wireless devices from connecting to other wireless devices that are also connected to the router.Enter the SSID name you want to use for the wireless network.Use the dropdown menu to specify the wireless mode.Use the dropdown menu to select the wireless channel.Use the dropdown menu to select the channel bandwidth. If you selected the 802.11n, 802.11 b/g, or 802.11 b/g/n wireless modes, the available options are 20 MHz and 20/40 MHz. For the others, 20 MHz is the only option.Select a wireless security encryption option. You can also choose to not use one by selecting None, but this is not recommended.Enabled Access Point Mode:Enable SSID Broadcast:Enable Wireless Isolation:Name (SSID):Mode:Channel:Band Width:Security Options:This page allows you to congure the wireless LAN settings. You can also congure the wireless encryption and wireless network parameters.

33D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Access Point ModeWireless security helps to prevent unauthorized users from accessing your wireless network, or seeing data being passed between the router and wireless clients. The DIR-516 supports two popular wireless security protocols, you should select a protocol based on the wireless clients which will be accessing your network. Wired Equivalent Privacy (WEP)This is an older form of wireless security and should only be used if your wireless clients do not support the newer WPA or WPA2 protocols. Select WEP from the drop-down menu. Select either Automatic or Shared Key as the authentication type. Select the encryption strength from the drop-down menu. 64-bit - A 64-bit key comprises a string of 10 hexadecimal characters, or 5 ASCII characters. 128-bit - A 128-bit key comprises a string of 26 hexadecimal characters, or 13 ASCII characters. You can predetermine up to 4 WEP keys. Select the WEP key you wish to use by clicking on the radio buttons next to the keys. Select whether you wish to use HEX or ASCII characters in your key using the drop-down menu. Enter the desired key in the eld provided. Click Save Settings to save the current settings. Security Options:Authentication Type:Encryption Strength:Key 1-4:

34D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Access Point ModeWi-Fi Protected Access (WPA/WPA2)This is a newer and more secure protocol for wireless security. It uses a cipher combined with a pre-shared key (password) to encrypt data being sent over the wireless network. It is recommended that you use this security method if it is supported by your wireless clients. Select WPA-PSK/WPA2-PSK AES from the drop-down menu. Enter a pre-shared key (password) to secure your wireless network. Wireless clients will require this password in order to connect to your network. It is recommended that you make a record of this password for future reference. Click Save Settings to save the current settings. Security Options:Pre-Shared Key:

35D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Access Point ModeWi-Fi Protected (WPS) SetupIf you wish to use the Push-Button Connection (PBC) method, simply press the WPS button on the side of the router. The power LED will begin to ash. Within 120 seconds, press the WPS button on the device that you wish to connect. The power LED will turn solid green if the connection is successful. To connect using the PIN method, click Next to begin the WPS setup process. Enter the PIN for the wireless NIC and click Start PIN. If successful, you will then be taken to another screen and a message will tell you to run WPS in the client device within 2 minutes.Wi-Fi Protected Setup (WPS) System is a simplied method for securely connecting new devices to your network. The process as easy as pressing a button (the Push-Button Connection method) or correctly entering the 8-digit code (the PIN method).

36D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Access Point ModeThis page allows you to reboot your router or reset it to the factory default settings.RebootMaintenanceClick the Reboot button to reboot the system. To reset the system to the factory default setting, click the Reset button. This will erase the current settings.

37D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Access Point ModeFirmwareThis page allows you to upgrade the rmware of the router. If you plan to install new rmware, make sure the rmware you want to use is on the local hard drive of the computer. Please check the D-Link support site for rmware updates at http://support.dlink.com. You can download rmware upgrades to your hard drive from the D-Link support site.After you have downloaded the new rmware, clickBrowse to locate the rmware update on your harddrive.Choose File:Click the Upload button to upload a le to the router after you have selected it, or click the Reset button to cancel the selection.

38D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Access Point ModeSystemThis page allows you to save the router’s current conguration le onto your computer’s hard drive or load a saved le from your hard drive.Click the Save button to download the current conguration settings as a le onto your hard drive. To load a previously saved settings le, click the Browse button to locate the le on your hard drive, then click the Upload button.

39D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Access Point ModeAdminEnter a username.The user has root privilege.Enter the current password of the account.Enter the new password for the account.Retype the new password.User Name:Privilege:Old Password:New Password:Conrm Password:This page allows you to add a user account to the router’s web server. You can also delete or modify existing accounts.Click the Add button to save any changes made. The user account will also be added to the User Account Table below. To modify an existing user account, click the Select tab next to the user account in the table, edit the user settings you wish to change, and then click the Modify button. To delete an existing account, click the Select tab next to the user account in the table and then click the Delete button.

40D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Access Point ModeDisplays the router’s time and rmware version.Displays the MAC address and the private (local) IP settings for the router.Displays the wireless MAC address and your wirelesssettings such as SSID and Channel.Displays the MAC address and the public IP settings forthe router.System:Device InfoThis page displays the current status and basic settings of the router. StatusLAN Conguration:WLAN Conguration:WAN Conguration:Click the Refresh button to view the most current information.

41D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Access Point ModeWirelessThis table displays all active wired clients.This table displays all active wireless clients.Active Wired Client Table:Active Wireless Client Table:This page displays lists of all wired and wireless clients. The IP address and MAC address of each client is displayed in the tables.Click the Save Settings button to save any changes made.

42D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Access Point ModeStatisticsThis page displays the statistics for packets that have been transmitted and received on the network on the router’s WAN and LAN ports, and wireless bands. Click the Refresh button to refresh the router’s trac statistics.

43D-Link DIR-516 User ManualSection 2 - Setting Up With a Web Browser - Access Point ModeSupportThis section provides an explanation of each conguration or setting for the DIR-516. Click on the links to be taken to the help text for that particular section of router’s setup.

44D-Link DIR-516 User ManualSection 3 - Connecting a Wireless ClientConnecting a Wireless ClientWPS ButtonStep 2 - Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS process).The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Many wireless devices will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-516 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS on it.Step 1 - Press the WPS button on the DIR-516 for about 1 second. The WPS button will start to blink.Step 3 - Allow up to 1 minute for the devices to congure your connection. Once the WPS light stops blinking, you will be connected and your wireless connection will be secure with WPA2.

45D-Link DIR-516 User ManualSection 3 - Connecting a Wireless ClientWindows® 8WPA/WPA2It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used.To join an existing network, locate the wireless network icon in the taskbar, next to the time display. Wireless IconClicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the desired network by clicking on the network name.

46D-Link DIR-516 User ManualSection 3 - Connecting a Wireless ClientYou will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router at the point to enable the WPS function. When you have established a successful connection a wireless network, the word Connected will appear next to the name of the network to which you are connected.

47D-Link DIR-516 User ManualSection 3 - Connecting a Wireless ClientWindows® 7It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.1. Click on the wireless icon in your system tray (lower-right corner).2. The utility will display any available wireless networks in your area.Wireless IconWPA/WPA2

48D-Link DIR-516 User ManualSection 3 - Connecting a Wireless Client3. Highlight the wireless network (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.4. The following window appears while your computer tries to connect to the router.

49D-Link DIR-516 User ManualSection 3 - Connecting a Wireless Client5. Enter the same security key or passphrase that is on your router and click Connect. You can also connect by pushing the WPS button on the router.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.

50D-Link DIR-516 User ManualSection 3 - Connecting a Wireless ClientWPSThe WPS feature of the DIR-516 can be congured using Windows® 7. Carry out the following steps to use Windows® 7 to congure the WPS feature:1. Click the Start button and select Computer from the Start menu.2. Click Network on the left side.

51D-Link DIR-516 User ManualSection 3 - Connecting a Wireless Client3. Double-click the DIR-516.4. Input the WPS PIN number (displayed in the WPS window on the Router’s LCD screen or in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next.',5

52D-Link DIR-516 User ManualSection 3 - Connecting a Wireless Client5. Type a name to identify the network.6. To congure advanced settings, click the icon.Click Next to continue.

53D-Link DIR-516 User ManualSection 3 - Connecting a Wireless Client7. The following window appears while the Router is being congured. Wait for the conguration to complete.8. The following window informs you that WPS on the router has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future.9. Click Close to complete WPS setup.

54D-Link DIR-516 User ManualSection 3 - Connecting a Wireless ClientWindows Vista®Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows Vista® utility as seen below.Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. orThe utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.

55D-Link DIR-516 User ManualSection 3 - Connecting a Wireless ClientWPA/WPA2It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.2. Highlight the wireless network (SSID) you would like to connect to and click Connect.1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network.

56D-Link DIR-516 User ManualSection 3 - Connecting a Wireless Client3. Enter the same security key or passphrase that is on your router and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.

57D-Link DIR-516 User ManualSection 3 - Connecting a Wireless ClientWPS/WCN 2.0The router supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista®. The following instructions for setting this up depends on whether you are using Windows Vista® to congure the router or third party software. When you rst set up the router, Wi-Fi protection is disabled and uncongured. To enjoy the benets of Wi-Fi protection, the router must be both enabled and congured. There are three basic methods to accomplish this: use Windows Vista’s built-in support for WCN 2.0, use software provided by a third party, or manually congure. If you are running Windows Vista®, log into the router and click the Enable checkbox in the Basic > Wireless section. Use the Current PIN that is displayed on the Advanced > Wi-Fi Protected Setup section or choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are nished, proceed to the next section to set up the newly-congured router.

58D-Link DIR-516 User ManualSection 3 - Connecting a Wireless ClientWindows® XPWindows® XP users may use the built-in wireless utility (Zero Conguration Utility). The following instructions are for Service Pack 2 users. If you are using another company’s utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below.Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. orThe utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.

59D-Link DIR-516 User ManualSection 3 - Connecting a Wireless ClientIt is recommended to enable WPA on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used.2. Highlight the wireless network (SSID) you would like to connect to and click Connect.1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. WPA/WPA2

60D-Link DIR-516 User ManualSection 3 - Connecting a Wireless Client3. The Wireless Network Connection box will appear. Enter the WPA-PSK passphrase and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router.

61D-Link DIR-516 User ManualSection 4 - TroubleshootingTroubleshootingThis chapter provides solutions to problems that can occur during the installation and operation of the DIR-516. Read the following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a dierent operating system, the screenshots on your computer will look similar to the following examples.1. Why can’t I access the web-based conguration utility?When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. • Make sure you have an updated Java-enabled web browser. We recommend the following: - Microsoft Internet Explorer® 6.0 and higher- Mozilla Firefox 3.0 and higher- Google™ Chrome 2.0 and higher- Apple Safari 3.0 and higher• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a dierent cable or connect to a dierent port on the device if possible. If the computer is turned o, the link light may not be on.• Disable any Internet security software running on the computer. Software rewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows® XP rewall may block access to the conguration pages. Check the help les included with your rewall software for more information on disabling or conguring it.

62D-Link DIR-516 User ManualSection 4 - Troubleshooting• Congure your Internet settings:• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.• Close your web browser (if open) and open it.• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. • If you still cannot access the conguration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the conguration. If you have multiple computers, try connecting using a dierent computer.2. What can I do if I forgot my password?If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults.To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty.

63D-Link DIR-516 User ManualSection 4 - Troubleshooting3. Why can’t I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To nd the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be another computer, or a URL. • Click on Start and then click Run. • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, 7 and 8 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472

64D-Link DIR-516 User ManualSection 4 - TroubleshootingYou should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480). Once you nd your MTU, you can now congure your router with the proper MTU size. To change the MTU rate on your router follow the steps below: • Open your browser, enter the IP address of your router (192.168.0.1) and click OK. • Enter your username (admin) and password (blank by default). Click OK to enter the web conguration page for the device. • Click on Setup and then click Manual Congure. • To change the MTU enter the number in the MTU eld and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten.

65D-Link DIR-516 User ManualAppendix A - Wireless BasicsD-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and oce environments, and public areas such as airports, coee shops, and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more eciently. Increased mobility and the absence of cabling and other xed infrastructure have proven to be benecial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link.Wireless Basics

66D-Link DIR-516 User ManualAppendix A - Wireless BasicsWhat is Wireless?Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or oce network.Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can aord. D-Link has all the products you need to build your network.How does wireless work? Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two dierent types of wireless networks: Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN).Wireless Local Area Network (WLAN)In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues.

67D-Link DIR-516 User ManualAppendix A - Wireless BasicsWireless Personal Area Network (WPAN)Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away.Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries.Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, oce, business, D-Link has a wireless solution for it.Home • Gives everyone at home broadband access • Surf the web, check email, instant message, etc. • Gets rid of the cables around the house • Simple and easy to use Small Oce and Home Oce • Stay on top of everything at home as you would at oce • Remotely access your oce network from home • Share Internet connection and printer with multiple computers • No need to dedicate oce space

68D-Link DIR-516 User ManualAppendix A - Wireless BasicsWhere is wireless used? Wireless technology is expanding everywhere not just at home or oce. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.Using a D-Link CardBus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations such as airports, hotels, coee shops, libraries, restaurants, and convention centers.A wireless network is easy to setup, but if you’re installing it for the rst time it could be quite a task not knowing where to start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.TipsHere are a few things to keep in mind, when you install a wireless network.Centralize your router or Access Point Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range.Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would signicantly reduce any interference that the appliances might cause since they operate on same frequency.Security Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up.

69D-Link DIR-516 User ManualAppendix B - Networking BasicsNetworking BasicsCheck your IP addressAfter you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.Click on Start > Run. In the run box type cmd and click OK. (Windows® 8/7/Vista® users type cmd in the Start Search box.)At the prompt, type ipcong and press Enter.This will display the IP address, subnet mask, and the default gateway of your adapter.If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some rewall software programs may block a DHCP request on newly installed adapters.

70D-Link DIR-516 User ManualAppendix B - Networking BasicsStatically Assign an IP addressIf you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:Step 1Windows® 7 - Click on Start > Control Panel > Network and Internet > Network and Sharing Center.Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.Windows® XP - Click on Start > Control Panel > Network Connections.Windows® 2000 - From the desktop, right-click My Network Places > Properties.Step 2Right-click on the Local Area Connection which represents your network adapter and select Properties.Step 3Highlight Internet Protocol (TCP/IP) and click Properties.Step 4Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router (I.E. 192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP.Step 5Click OK twice to save your settings.

71D-Link DIR-516 User ManualAppendix C - Technical SpecicationsTechnical SpecicationsStandards • IEEE 802.11a • IEEE 802.11b • IEEE 802.11g • IEEE 802.11n • IEEE 802.11ac(Draft)Interfaces • 802.11n/g/b wireless • 10/100 WAN/LAN port • WPS button • Reset button • Switch Button for 2.4GHz/5GHzWireless Modes • Router Mode • Access Point ModeWireless Frequency Range1 • 2.4 GHz to 2.4835 GHz • 5.15~5.25GHz, 5.725 ~ 5.85GHzAntennas • Internal AntennaSecurity • Wi-Fi Protected Access (WPA/WPA2) • WPS™ (PBC) Diagnostic LEDs • Power • InternetOperating Temperature • 0 to 40 ˚C (32 to 104 ˚F)Operating Humidity • 0% to 90% non-condensingPower • 5 V DC Certications • CE • Wi-Fi Certied • FCCDimensions • 63x44x23mmWeight • 29.72g1 Frequency Range varies depending on local regulations.

72D-Link DIR-516 User ManualAppendix D - Safety StatementsSafety StatementsCE Mark Warning:This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment. This device meets all the other requirements specied in Part 15E, Section 15.407 of the FCC Rules. Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

AppendixDͲSafetyStatements_____________________________________________________________________ThemodelDIRͲ516isintendedforusewithothercertifiedequipmentwithlimitedpowersource,wherethesuitabilityofthecombinationistobedetermined.㲐シ!ὅ㒂Ỷ≇䌯暣㲊廣⮬⿏暣㨇䭉䎮彎㱽䫔⋩Ḵ㡅烉䴻✳⺷娵嫱⎰㟤ᷳỶ≇䌯⮬柣暣㨇炻朆䴻姙⎗炻℔⎠ˣ⓮嘇ㆾἧ䓐侭⛯ᶵ⼿㑭冒嬲㚜柣䌯ˣ≈⣏≇䌯ㆾ嬲㚜⍇姕妰ᷳ䈡⿏⍲≇傥ˤ䫔⋩⚃㡅烉Ỷ≇䌯⮬柣暣㨇ᷳἧ䓐ᶵ⼿⼙枧梃凒⬱ℐ⍲⸚㒦⎰㱽忂ᾉ烊䴻䘤䎦㚱⸚㒦䎦尉㗪炻ㅱ䩳⌛ 䓐炻᷎㓡┬军䃉⸚㒦㗪㕡⼿两临ἧ䓐ˤ⇵枭⎰㱽忂ᾉ炻㊯ὅ暣ᾉ夷⭂ἄ㤕ᷳ䃉䶂暣ᾉˤỶ≇䌯⮬柣暣㨇枰⽵⍿⎰㱽忂ᾉㆾⶍ㤕ˣ䥹⬠⍲慓䗪䓐暣㲊廣⮬⿏暣㨇姕⁁ᷳ⸚㒦ˤ

Navigation menu

Upload a User Manual

Namespaces

Wiki Guide
HTML
PDF
Info

Views

User Manual
Discussion / Help

Navigation

© 2024 UserManual.wiki | Privacy Policy

Contact Us
DMCA