D Link IR516A1 Wireless AC Router User Manual DIR 516 Manual
D Link Corporation Wireless AC Router DIR 516 Manual
D Link >
User Manual.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2164446 |
| Application ID | 40xAyT15t085wRWy5lSRJA== |
| Document Description | User Manual.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 149.74kB (1871723 bits) |
| Date Submitted | 2014-01-13 00:00:00 |
| Date Available | 2014-01-13 00:00:00 |
| Creation Date | 2014-01-07 16:37:40 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2014-01-07 16:54:22 |
| Document Title | DIR-516_Manual.pdf |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | TracyTing |
Version 1.0 | December 12, 2013 User Manual DIR-516 Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date 1.0 December 16, 2013 Description • Initial release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright © 2013 by D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation. This purpose of this product is to create a constant network connection for your devices. As such, it does not have a standby mode or use a power management mode. If you wish to power down this product, please simply unplug it from the power outlet. D-Link DIR-516 User Manual Table of Contents Table of Contents Preface ................................................................................. i Manual Revisions ........................................................................... i Trademarks ...................................................................................... i Product Overview .............................................................. 1 Package Contents ......................................................................... 1 System Requirements ................................................................. 2 Introduction ................................................................................... 3 Features............................................................................................ 4 Hardware Overview ..................................................................... 5 Front/Side ................................................................................ 5 Bottom ...................................................................................... 6 Operation Modes.......................................................................... 7 Router Mode........................................................................... 8 Access Point Mode ............................................................... 9 Wireless Installation Considerations ....................................10 Setting Up With a Web Browser ......................................11 Router Mode.........................................................................12 Access Point Mode .............................................................12 Router Mode ................................................................................13 Initial Setup Wizard ............................................................13 Manual Configuration .......................................................15 Setup ..................................................................................16 Wizard ..........................................................................16 Local Network ...........................................................20 Internet Setup ...........................................................24 D-Link DIR-516 User Manual Wireless..............................................................................27 Wireless Basics...........................................................27 Wi-Fi Protected (WPS) Setup................................30 Advanced Wireless...................................................31 Advanced ..........................................................................33 Access Control List ...................................................33 Port Triggering ..........................................................34 DMZ ..............................................................................35 URL Block ....................................................................36 Dynamic DNS ............................................................37 QoS ................................................................................38 UPnP .............................................................................40 Virtual Server .............................................................41 Maintenance ....................................................................43 Reboot .........................................................................43 Firmware Upgrade ...................................................44 Backup/Restore.........................................................45 Admin...........................................................................46 Time and Date ...........................................................47 Status..................................................................................48 Device Info..................................................................48 Active Client Table ...................................................49 Statistics ......................................................................50 Help.....................................................................................51 Access Point Mode .....................................................................52 Manual Configuration .......................................................52 ii Table of Contents Setup ..................................................................................53 Local Network ...........................................................53 Wireless..............................................................................54 Wireless Basics...........................................................54 Wi-Fi Protected (WPS) Setup................................57 Advanced Wireless...................................................58 Maintenance ....................................................................60 Reboot .........................................................................60 Firmware Upgrade ...................................................61 Backup/Restore.........................................................62 Admin...........................................................................63 Time and Date ...........................................................64 Status..................................................................................65 Device Info..................................................................65 Active Client Table ...................................................66 Statistics ......................................................................67 Help.....................................................................................68 Windows® XP ................................................................................83 WPA/WPA2 ............................................................................84 Troubleshooting ..............................................................86 Wireless Basics .................................................................90 What is Wireless? .........................................................................91 Tips...................................................................................................93 Networking Basics ...........................................................94 Statically Assign an IP address ...............................................95 Technical Specifications ..................................................96 Safety Statements ...........................................................97 Connecting a Wireless Client ..........................................69 WPS Button ...................................................................................69 Windows® 8...................................................................................70 WPA/WPA2 ............................................................................70 Windows® 7...................................................................................72 WPA/WPA2 ............................................................................72 WPS ..........................................................................................75 DIR-516 ...................................................................................76 Windows Vista®............................................................................79 WPA/WPA2 ............................................................................80 WPS/WCN 2.0 .......................................................................82 D-Link DIR-516 User Manual iii Section 1 - Product Overview Product Overview Package Contents DIR-516 Quick Installation Guide If any of the above items are missing from your package, please contact your reseller. D-Link DIR-516 User Manual Section 1 - Product Overview System Requirements Network Requirements • An Ethernet-based Cable or DSL modem • IEEE 802.11ac, 802.11a, 802.11n or 802.11g wireless clients • 10/100 Ethernet Computer with the following: • Windows®, Macintosh, or Linux-based operating system • An installed Ethernet adapter Web-based Configuration Utility Requirements Browser Requirements: • Microsoft Internet Explorer® v7, Mozilla® Firefox® v9.0, Google® Chrome 16.0, or Safari® v4 or higher version Windows® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. D-Link DIR-516 User Manual Section 1 - Product Overview Introduction TOTAL COVERAGE Provides greater wireless signal rates even at farther distances for incredible wireless coverage. ULTIMATE PERFORMANCE The D-Link DIR-516 lets you create a secure wireless network to share photos, files, music, video, printers, and network storage throughout your home. Connect the DIR-516 router to a cable or DSL modem and share your high-speed Internet access with everyone on the network. TOTAL NETWORK SECURITY The DIR-516 router supports all of the latest wireless security features to prevent unauthorized access, be it from over the wireless network or from the Internet. Support for WPA/WPA2 standards ensure that you’ll be able to use the best possible encryption method, regardless of your client devices. In addition, this router utilizes dual active firewalls (SPI and NAT) to prevent potential attacks from across the Internet. * Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and draft 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-516 User Manual Section 1 - Product Overview Features • Faster Wireless Networking - The DIR-516 provides an up to 150Mbps wireless connection in 2.4GHz band, 433Mbps wireless connection in 5GHz with other 802.11ac and draft 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. • Portable and Easy to Use - Simply plug the DIR-516 into a power outlet at home or abroad to create an instant wireless network wherever you are. • Compatible with 802.11a/g/n Devices - The DIR-516 is still fully compatible with the IEEE 802.11a, 802.11g and 802.11n, so it can connect with existing 802.11a, 802.11g and 802.11n PCI, USB, and Cardbus adapters. • User-friendly Setup Wizard - Through its easy-to-use web-based user interface, the DIR-516 lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company’s server. Configure your router to your specific settings within minutes. * Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and draft 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-516 User Manual Section 1 - Product Overview Hardware Overview Front/Side Power (PWR LED) A solid green light indicates a proper connection to the power supply. The light will blink when connectiong to a device through WPS. Internet (ISP) LEd A solid light indicates connection on the Internet port. Selector Switch WPS Button Press this to activate Wi-Fi Protected Setup(WPS) to connect other wireless devices automatically. Reset Button Pressing the Reset button for 5 seconds restores the router to its original factory default settings. D-Link DIR-516 User Manual Slide this switch to select between 2.4GHz and 5GHz Section 1 - Product Overview Hardware Overview Bottom Ethernet Port D-Link DIR-516 User Manual The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem. Section 1 - Product Overview Operation Modes Depending on how you want to use your DIR-516 will determine which mode you use. The following pages describe each mode to help you figure out which one to use. • Router Mode: page 8 • Access Point Mode: page 9 D-Link DIR-516 User Manual Section 1 - Product Overview Router Mode In Router Mode, the DIR-516 connects to your cable modem, DSL modem, or other Internet source and shares your Internet connection with your devices wirelessly, providing Internet access for an entire home or office. Router Mode Internet D-Link DIR-516 User Manual Cable/DSL Modem Wireless Devices Section 1 - Product Overview Access Point Mode In Access Point Mode, the DIR-516 connects your wireless devices together, but does not provide routing functionality. It also allows a connected wired device to connect to your other devices wirelessly. This can be useful if you already have an existing Internet router that does not have built-in wireless capabilities. You can also use this to create a private wireless network without Internet access so that your devices can securely connect to one another without being exposed to the Internet or other computers. Access Point Mode Internet (optional) Router (optional) Wireless Devices D-Link DIR-516 User Manual Section 1 - Product Overview Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DIR-516 User Manual 10 Section 2 - Setting Up With a Web Browser - Router Mode Router Mode This section will show you how to configure your new D-Link wireless router using the web-based configuration utility. To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1). Enter admin in the User Name field. By default, the password should be left blank. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance. D-Link DIR-516 User Manual 11 Section 2 - Setting Up With a Web Browser - Router Mode Network Settings This section will allow you to change the local network settings of the router and to configure the DHCP settings. LAN Interface: Use this section to configure the router’s local network settings. DHCP Server Use this section to configure the DIR-516’s built-in DHCP Settings: server settings. DHCP Static IP Use this section to add a new DHCP Static IP configuration. Configuration: DHCP Static IP Displays information about the devices that have a static Table: DHCP assigned from the DIR-516. The information includes the IP Address and MAC Address. You can delete or edit an existing static IP configuration in the table. D-Link DIR-516 User Manual 12 Section 2 - Setting Up With a Web Browser - Router Mode IP Address: Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the subnet mask. The default subnet mask is 255.255.255.0. Click the Apply Changes button to save any changes made. D-Link DIR-516 User Manual 13 Section 2 - Setting Up With a Web Browser - Router Mode DHCP stands for Dynamic Host Control Protocol. The DIR-516 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DIR-516. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. DHCP Server: Enable the DHCP Server option in the pulldown menu to enable the DHCP server on your router. Choose None to disable this function. DHCP IP Enter the starting and ending IP addresses for the DHCP Address Range: server’s IP assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. Lease Time: The maximum length of time for the IP address lease. Enter the Lease time in minutes. DNS Server 1: Enter the IP address of the first DNS Server. DNS Server 2: Enter the IP address of the second DNS Server, if there is one. When you have finished configuring the new DHCP Server Settings, click the Save Setting button. D-Link DIR-516 User Manual 14 Section 2 - Setting Up With a Web Browser - Router Mode If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within the DHCP IP address range. IP Address: Enter the IP address you want to assign to the computer or device. This IP address must be within the DHCP IP address range. MAC Address: Enter the MAC address of the computer or device. When you have finished configuring the new DHCP reservation, click the Add button to activate your reservation. It will then be displayed in the DHCP Static IP Table below. The DHCP Static IP Table displays the IP reservations that have been created. To make any changes, select a reservation in the table by clicking the circle next to it and click Update. To delete a reservation, select a reservation and click Delete Selected. D-Link DIR-516 User Manual 15 Section 2 - Setting Up With a Web Browser - Router Mode Internet Setup This section allows you to manually configure your router’s Internet WAN settings. WAN Access Select the WAN interface type. Type: If you choose DHCP, please configure the following fields: Host Name: Enter the host name of the router. MTU Size: Enter the MTU size. Attain DNS Click this if the DNS is to be obtained automatically. Automatically: Set DNS Click this to specify a DNS server. You can enter up to two Manually: DNS servers. MAC Clone Select the MAC address to be used for the connection. Select Default MAC to use the router’s MAC address. Select MAC from PC to copy your PC’s MAC address, or select MAC Manual to manually enter a MAC address in the field provided. When you have finished configuring the WAN settings, click the Save Settings button. D-Link DIR-516 User Manual 16 Section 2 - Setting Up With a Web Browser - Router Mode If you choose Static IP, please configure the following fields; WAN Access Select Static IP from the drop-down menu. Type: IP Address: Enter the static IP address which was provided to you by your Internet Service Provider (ISP). Subnet Mask: Enter the subnet provided by your ISP. Default Enter the default gateway provided by your ISP. Gateway: MTU Size: Enter the Maximum Transmission Unit size. The default value is 1500. DNS Server 1: Enter the primary DNS server address provided by your ISP. DNS Server 2: Enter the secondary DNS server address provided by your ISP. MAC Clone: Select the MAC address to be used for the connection. Select Default MAC to use the router’s MAC address. Select MAC from PC to copy your PC’s MAC address, or select MAC Manual to manually enter a MAC address in the field provided. Click Save Settings to save the current configuration, or click Don’t Save Settings to discard. D-Link DIR-516 User Manual 17 Section 2 - Setting Up With a Web Browser - Router Mode If you choose PPPoE, please configure the following fields: WAN Access Select PPPoE from the drop-down menu. Type: User Name: Enter the user name provided to you by your ISP. Password: Enter the password provided to you by your ISP. Service Name: Enter the service name if your ISP provided you with one, otherwise leave this field empty. MTU Size: Enter the Maximum Transmission Unit size. The default value is 1492. Static IP If your ISP or network administrator requires you to have a Address: static IP address for your connection, enter it here. Connection Select Continuous, Connect on Demand, or Manual as Type: the connection type from the drop-down menu. If you select Manual, the connect and disconnect buttons will be available. Attain DNS Automatically: Click this if the DNS is to be obtained automatically. Set DNS Click this to specify a DNS server. You can enter up to two Manually: DNS servers. MAC Clone: Select the MAC address to be used for the connection. Select Default MAC to use the router’s MAC address. Select MAC from PC to copy your PC’s MAC address, or select MAC Manual to manually enter a MAC address in the field provided. When you have finished configuring the WAN settings, click the Save Settings button. D-Link DIR-516 User Manual 18 Section 2 - Setting Up With a Web Browser - Router Mode Wireless • Wireless Settings This page allows you to configure the wireless LAN settings. You can also configure the wireless encryption and wireless network parameters. Enabled Access Use this to disable NAT on the router and turn it into an Point Mode: Access Point. Enable Wireless: Enable SSID broadcast if you want the router to transmit its SSID publicly so other wireless devices can discover it. Name (SSID): Enter the SSID name you want to use for your wireless network. Mode: Use the dropdown menu to specify the wireless mode. Channel: Use the dropdown menu to select the wireless channel. Band Width: Use the dropdown menu to select the channel bandwidth. If you selected the 802.11ac, 802.11n, 802.11 b/g, or 802.11 b/g/n wireless modes, the available options are 20 MHz and 20/40 MHz. 20/40/80MHz(Auto) For the others, 20 MHz is the only option. Security Select a wireless security encryption option. You can also Options: choose to not use one by selecting None, but this is not recommended. D-Link DIR-516 User Manual 19 Section 2 - Setting Up With a Web Browser - Router Mode Wireless security helps to prevent unauthorized users from accessing your wireless network, or seeing data being passed between the router and wireless clients. The DIR-516 supports two popular wireless security protocols, you should select a protocol based on the wireless clients which will be accessing your network. Wired Equivalent Privacy (WEP) This is an older form of wireless security and should only be used if your wireless clients do not support the newer WPA or WPA2 protocols. Security Select WEP from the drop-down menu. Options: Authentication Select either Automatic or Shared Key as the Type: authentication type. Encryption Select the encryption strength from the drop-down Strength: menu. 64-bit - A 64-bit key comprises a string of 10 hexadecimal characters, or 5 ASCII characters. 128-bit - A 128-bit key comprises a string of 26 hexadecimal characters, or 13 ASCII characters. Key 1-4: You can predetermine up to 4 WEP keys. Select the WEP key you wish to use by clicking on the radio buttons next to the keys. Select whether you wish to use HEX or ASCII characters in your key using the drop-down menu. Enter the desired key in the field provided. Click Apply to save the current settings. D-Link DIR-516 User Manual 20 Section 2 - Setting Up With a Web Browser - Router Mode Wi-Fi Protected Access (WPA/WPA2) This is a newer and more secure protocol for wireless security. It uses a cipher combined with a pre-shared key (password) to encrypt data being sent over the wireless network. It is recommended that you use this security method if it is supported by your wireless clients. Security Select WPA-PSK/WPA2-PSK AES from the drop-down Options: menu. Pre-Shared Key: Enter a pre-shared key (password) to secure your wireless network. Wireless clients will require this password in order to connect to your network. It is recommended that you make a record of this password for future reference. Click Save Settings to save the current settings. D-Link DIR-516 User Manual 21 Section 2 - Setting Up With a Web Browser - Router Mode Wi-Fi Protected (WPS) Setup Wi-Fi Protected Setup (WPS) System is a simplified method for securely connecting new devices to your network. The process as easy as pressing a button (the Push-Button Connection method) or correctly entering the 8-digit code (the PIN method). If you wish to use the Push-Button Connection (PBC) method, simply press the WPS button on the side of the router. The power LED will begin to flash. Within 120 seconds, press the WPS button on the device that you wish to connect. The power LED will turn solid green if the connection is successful. To connect using the PIN method, click Next to begin the WPS setup process. Enter the PIN for the wireless NIC and click Start PIN. If successful, you will then be taken to another screen and a message will tell you to run WPS in the client device within 2 minutes. D-Link DIR-516 User Manual 22 Section 2 - Setting Up With a Web Browser - Router Mode Firmware This page allows you to upgrade the firmware of the router. If you plan to install new firmware, make sure the firmware you want to use is on the local hard drive of the computer. Please check the D-Link support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site. Select File: After you have downloaded the new firmware, click Browse to locate the firmware update on your hard drive. If you want to reset the router’s settings to their default values, then check the Automatically reset default after firmware upgraded box. Click the Upload button to upload a file to the router after you have selected it. D-Link DIR-516 User Manual 23 Section 2 - Setting Up With a Web Browser - Router Mode System This page allows you to save the router’s current configuration file onto your computer’s hard drive or load a saved file from your hard drive. Click the Save Settings to File button to download the current configuration settings as a file onto your hard drive. To load a previously saved settings file, click the Browse button to locate the file on your hard drive, then click the Upload button. D-Link DIR-516 User Manual 24 Section 2 - Setting Up With a Web Browser - Router Mode Admin This page allows you to add a user account to the router’s web server. You can also delete or modify existing accounts. Confirm Retype the new password. Password: To delete an existing account, click the Select tab next to the user account in the table and then click the Delete button. D-Link DIR-516 User Manual 25 Section 2 - Setting Up With a Web Browser - Router Mode Status Device Info This page displays the current status and basic settings of the router. System: Displays the router’s time and firmware version. LAN Displays the MAC address and the private (local) IP Configuration: settings for the router. WLAN Displays the wireless MAC address and your wireless Configuration: settings such as SSID and Channel. WAN Displays the MAC address and the public IP settings for Configuration: the router. Click the Refresh button to view the most current information. D-Link DIR-516 User Manual 26 Section 2 - Setting Up With a Web Browser - Router Mode Wireless This page displays lists of all wired and wireless clients. The IP address and MAC address of each client is displayed in the tables. Active Wired Client This table displays all active wired clients. Table: Active Wireless This table displays all active wireless clients. Client Table: D-Link DIR-516 User Manual 27 Section 2 - Setting Up With a Web Browser - Router Mode Statistics This page displays the statistics for packets that have been transmitted and received on the network on the router’s WAN and LAN ports, and wireless bands. Click the Refresh button to refresh the router’s traffic statistics. D-Link DIR-516 User Manual 28 Section 2 - Setting Up With a Web Browser - Router Mode Support This section provides an explanation of each configuration or setting for the DIR-516. Click on the links to be taken to the help text for that particular section of router’s setup. D-Link DIR-516 User Manual 29 Section 2 - Setting Up With a Web Browser - Access Point Mode Access Point Mode Manual Configuration This section will show you how to configure your new D-Link wireless router using the web-based configuration utility. To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.50). Enter admin in the User Name field. Leave the password blank as the default password. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance. D-Link DIR-516 User Manual 30 Section 2 - Setting Up With a Web Browser - Access Point Mode Setup Local Network This section will allow you to change the local network settings of the access point. IP Address: Enter the IP address of the access point. Subnet Mask: Enter the subnet mask of the access point. D-Link DIR-516 User Manual 31 Section 2 - Setting Up With a Web Browser - Access Point Mode Wireless Wireless Settings This page allows you to configure the wireless LAN settings. You can also configure the wireless encryption and wireless network parameters. Enabled Access Use this to disable NAT on the router and turn it into an Point Mode: Access Point. Enable SSID Enable SSID broadcast if you want the router to transmit its Broadcast: SSID publicly so other wireless devices can discover it. Enable Wireless Enable wireless isolation to prevent connected wireless Isolation: devices from connecting to other wireless devices that are also connected to the router. Name (SSID): Enter the SSID name you want to use for the wireless network. Mode: Use the dropdown menu to specify the wireless mode. Channel: Use the dropdown menu to select the wireless channel. Band Width: Use the dropdown menu to select the channel bandwidth. If you selected the 802.11n, 802.11 b/g, or 802.11 b/g/n wireless modes, the available options are 20 MHz and 20/40 MHz. For the others, 20 MHz is the only option. Security Select a wireless security encryption option. You can also Options: choose to not use one by selecting None, but this is not recommended. D-Link DIR-516 User Manual 32 Section 2 - Setting Up With a Web Browser - Access Point Mode Wireless security helps to prevent unauthorized users from accessing your wireless network, or seeing data being passed between the router and wireless clients. The DIR-516 supports two popular wireless security protocols, you should select a protocol based on the wireless clients which will be accessing your network. Wired Equivalent Privacy (WEP) This is an older form of wireless security and should only be used if your wireless clients do not support the newer WPA or WPA2 protocols. Security Select WEP from the drop-down menu. Options: Authentication Select either Automatic or Shared Key as the authentication Type: type. Encryption Select the encryption strength from the drop-down menu. Strength: 64-bit - A 64-bit key comprises a string of 10 hexadecimal characters, or 5 ASCII characters. 128-bit - A 128-bit key comprises a string of 26 hexadecimal characters, or 13 ASCII characters. Key 1-4: You can predetermine up to 4 WEP keys. Select the WEP key you wish to use by clicking on the radio buttons next to the keys. Select whether you wish to use HEX or ASCII characters in your key using the drop-down menu. Enter the desired key in the field provided. Click Save Settings to save the current settings. D-Link DIR-516 User Manual 33 Section 2 - Setting Up With a Web Browser - Access Point Mode Wi-Fi Protected Access (WPA/WPA2) This is a newer and more secure protocol for wireless security. It uses a cipher combined with a pre-shared key (password) to encrypt data being sent over the wireless network. It is recommended that you use this security method if it is supported by your wireless clients. Security Select WPA-PSK/WPA2-PSK AES from the drop-down Options: menu. Pre-Shared Key: Enter a pre-shared key (password) to secure your wireless network. Wireless clients will require this password in order to connect to your network. It is recommended that you make a record of this password for future reference. Click Save Settings to save the current settings. D-Link DIR-516 User Manual 34 Section 2 - Setting Up With a Web Browser - Access Point Mode Wi-Fi Protected (WPS) Setup Wi-Fi Protected Setup (WPS) System is a simplified method for securely connecting new devices to your network. The process as easy as pressing a button (the Push-Button Connection method) or correctly entering the 8-digit code (the PIN method). If you wish to use the Push-Button Connection (PBC) method, simply press the WPS button on the side of the router. The power LED will begin to flash. Within 120 seconds, press the WPS button on the device that you wish to connect. The power LED will turn solid green if the connection is successful. To connect using the PIN method, click Next to begin the WPS setup process. Enter the PIN for the wireless NIC and click Start PIN. If successful, you will then be taken to another screen and a message will tell you to run WPS in the client device within 2 minutes. D-Link DIR-516 User Manual 35 Section 2 - Setting Up With a Web Browser - Access Point Mode Maintenance Reboot This page allows you to reboot your router or reset it to the factory default settings. Click the Reboot button to reboot the system. To reset the system to the factory default setting, click the Reset button. This will erase the current settings. D-Link DIR-516 User Manual 36 Section 2 - Setting Up With a Web Browser - Access Point Mode Firmware This page allows you to upgrade the firmware of the router. If you plan to install new firmware, make sure the firmware you want to use is on the local hard drive of the computer. Please check the D-Link support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site. Choose File: After you have downloaded the new firmware, click Browse to locate the firmware update on your hard drive. Click the Upload button to upload a file to the router after you have selected it, or click the Reset button to cancel the selection. D-Link DIR-516 User Manual 37 Section 2 - Setting Up With a Web Browser - Access Point Mode System This page allows you to save the router’s current configuration file onto your computer’s hard drive or load a saved file from your hard drive. Click the Save button to download the current configuration settings as a file onto your hard drive. To load a previously saved settings file, click the Browse button to locate the file on your hard drive, then click the Upload button. D-Link DIR-516 User Manual 38 Section 2 - Setting Up With a Web Browser - Access Point Mode Admin This page allows you to add a user account to the router’s web server. You can also delete or modify existing accounts. User Name: Enter a username. Privilege: The user has root privilege. Old Password: Enter the current password of the account. New Password: Enter the new password for the account. Confirm Password: Retype the new password. Click the Add button to save any changes made. The user account will also be added to the User Account Table below. To modify an existing user account, click the Select tab next to the user account in the table, edit the user settings you wish to change, and then click the Modify button. To delete an existing account, click the Select tab next to the user account in the table and then click the Delete button. D-Link DIR-516 User Manual 39 Section 2 - Setting Up With a Web Browser - Access Point Mode Status Device Info This page displays the current status and basic settings of the router. System: Displays the router’s time and firmware version. LAN Displays the MAC address and the private (local) IP Configuration: settings for the router. WLAN Displays the wireless MAC address and your wireless Configuration: settings such as SSID and Channel. WAN Displays the MAC address and the public IP settings for Configuration: the router. Click the Refresh button to view the most current information. D-Link DIR-516 User Manual 40 Section 2 - Setting Up With a Web Browser - Access Point Mode Wireless This page displays lists of all wired and wireless clients. The IP address and MAC address of each client is displayed in the tables. Active Wired Client This table displays all active wired clients. Table: Active Wireless This table displays all active wireless clients. Client Table: Click the Save Settings button to save any changes made. D-Link DIR-516 User Manual 41 Section 2 - Setting Up With a Web Browser - Access Point Mode Statistics This page displays the statistics for packets that have been transmitted and received on the network on the router’s WAN and LAN ports, and wireless bands. Click the Refresh button to refresh the router’s traffic statistics. D-Link DIR-516 User Manual 42 Section 2 - Setting Up With a Web Browser - Access Point Mode Support This section provides an explanation of each configuration or setting for the DIR-516. Click on the links to be taken to the help text for that particular section of router’s setup. D-Link DIR-516 User Manual 43 Section 3 - Connecting a Wireless Client Connecting a Wireless Client WPS Button The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Many wireless devices will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-516 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS on it. Step 1 - Press the WPS button on the DIR-516 for about 1 second. The WPS button will start to blink. Step 2 - Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS process). Step 3 - Allow up to 1 minute for the devices to configure your connection. Once the WPS light stops blinking, you will be connected and your wireless connection will be secure with WPA2. D-Link DIR-516 User Manual 44 Section 3 - Connecting a Wireless Client Windows® 8 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar, next to the time display. Wireless Icon Clicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DIR-516 User Manual 45 Section 3 - Connecting a Wireless Client You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router at the point to enable the WPS function. When you have established a successful connection a wireless network, the word Connected will appear next to the name of the network to which you are connected. D-Link DIR-516 User Manual 46 Section 3 - Connecting a Wireless Client Windows® 7 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area. D-Link DIR-516 User Manual 47 Section 3 - Connecting a Wireless Client 3. Highlight the wireless network (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-516 User Manual 48 Section 3 - Connecting a Wireless Client 5. Enter the same security key or passphrase that is on your router and click Connect. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-516 User Manual 49 Section 3 - Connecting a Wireless Client WPS The WPS feature of the DIR-516 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-516 User Manual 50 Section 3 - Connecting a Wireless Client 3. Double-click the DIR-516. ',5 4. Input the WPS PIN number (displayed in the WPS window on the Router’s LCD screen or in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next. D-Link DIR-516 User Manual 51 Section 3 - Connecting a Wireless Client 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-516 User Manual 52 Section 3 - Connecting a Wireless Client 7. The following window appears while the Router is being configured. Wait for the configuration to complete. 8. The following window informs you that WPS on the router has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-516 User Manual 53 Section 3 - Connecting a Wireless Client Windows Vista® Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows Vista® utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-516 User Manual 54 Section 3 - Connecting a Wireless Client WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-516 User Manual 55 Section 3 - Connecting a Wireless Client 3. Enter the same security key or passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-516 User Manual 56 Section 3 - Connecting a Wireless Client WPS/WCN 2.0 The router supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista®. The following instructions for setting this up depends on whether you are using Windows Vista® to configure the router or third party software. When you first set up the router, Wi-Fi protection is disabled and unconfigured. To enjoy the benefits of Wi-Fi protection, the router must be both enabled and configured. There are three basic methods to accomplish this: use Windows Vista’s built-in support for WCN 2.0, use software provided by a third party, or manually configure. If you are running Windows Vista®, log into the router and click the Enable checkbox in the Basic > Wireless section. Use the Current PIN that is displayed on the Advanced > Wi-Fi Protected Setup section or choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DIR-516 User Manual 57 Section 3 - Connecting a Wireless Client Windows® XP Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another company’s utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lowerright corner next to the time). Select View Available Wireless Networks. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-516 User Manual 58 Section 3 - Connecting a Wireless Client WPA/WPA2 It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used. 1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-516 User Manual 59 Section 3 - Connecting a Wireless Client 3. The Wireless Network Connection box will appear. Enter the WPA-PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DIR-516 User Manual 60 Section 4 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-516. Read the following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples. 1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. • Make sure you have an updated Java-enabled web browser. We recommend the following: Microsoft Internet Explorer® 6.0 and higher Mozilla Firefox 3.0 and higher Google™ Chrome 2.0 and higher Apple Safari 3.0 and higher • Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. • Disable any Internet security software running on the computer. Software firewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DIR-516 User Manual 61 Section 4 - Troubleshooting • Configure your Internet settings: • Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. • Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. • If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password? If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty. D-Link DIR-516 User Manual 62 Section 4 - Troubleshooting 3. Why can’t I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be another computer, or a URL. • Click on Start and then click Run. • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, 7 and 8 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-516 User Manual 63 Section 4 - Troubleshooting You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size. To change the MTU rate on your router follow the steps below: • Open your browser, enter the IP address of your router (192.168.0.1) and click OK. • Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the device. • Click on Setup and then click Manual Configure. • To change the MTU enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-516 User Manual 64 Appendix A - Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops, and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link. D-Link DIR-516 User Manual 65 Appendix A - Wireless Basics What is Wireless? Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network. Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work? Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networks: Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN). Wireless Local Area Network (WLAN) In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-516 User Manual 66 Appendix A - Wireless Basics Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access • Surf the web, check email, instant message, etc. • Gets rid of the cables around the house • Simple and easy to use Small Office and Home Office • Stay on top of everything at home as you would at office • Remotely access your office network from home • Share Internet connection and printer with multiple computers • No need to dedicate office space D-Link DIR-516 User Manual 67 Appendix A - Wireless Basics Where is wireless used? Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”. Using a D-Link CardBus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations such as airports, hotels, coffee shops, libraries, restaurants, and convention centers. A wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing where to start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind, when you install a wireless network. Centralize your router or Access Point Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. Security Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up. D-Link DIR-516 User Manual 68 Appendix B - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. (Windows® 8/7/Vista® users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-516 User Manual 69 Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step 1 Windows® 7 Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. Windows® XP Click on Start > Control Panel > Network Connections. Windows® 2000 - From the desktop, right-click My Network Places > Properties. Step 2 Right-click on the Local Area Connection which represents your network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router (I.E. 192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-516 User Manual 70 Appendix C - Technical Specifications Technical Specifications Standards • IEEE 802.11a • IEEE 802.11b • IEEE 802.11g • IEEE 802.11n • IEEE 802.11ac(Draft) Interfaces • 802.11n/g/b wireless • 10/100 WAN/LAN port • WPS button • Reset button • Switch Button for 2.4GHz/5GHz Wireless Modes • Router Mode • Access Point Mode Diagnostic LEDs • Power • Internet Operating Temperature • 0 to 40 ˚C (32 to 104 ˚F) Operating Humidity • 0% to 90% non-condensing Power • 5 V DC Certifications • CE • Wi-Fi Certified • FCC Wireless Frequency Range1 • 2.4 GHz to 2.4835 GHz • 5.15~5.25GHz, 5.725 ~ 5.85GHz Dimensions • 63x44x23mm Antennas • Internal Antenna Weight • 29.72g Security • Wi-Fi Protected Access (WPA/WPA2) • WPS™ (PBC) Frequency Range varies depending on local regulations. D-Link DIR-516 User Manual 71 Appendix D - Safety Statements Safety Statements CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. D-Link DIR-516 User Manual 72 AppendixDͲSafetyStatements _____________________________________________________________________ ThemodelDIRͲ516isintendedforusewithothercertifiedequipmentwithlimited powersource,wherethesuitabilityofthecombinationistobedetermined. 㲐シ ! ὅ㒂 Ỷ≇䌯暣㲊廣⮬⿏暣㨇䭉䎮彎㱽䫔⋩Ḵ㡅烉䴻✳⺷娵嫱⎰㟤ᷳỶ≇䌯⮬柣 暣㨇炻朆䴻姙⎗炻℔⎠ˣ⓮嘇ㆾἧ䓐侭⛯ᶵ⼿㑭冒嬲㚜柣䌯ˣ≈⣏≇䌯ㆾ嬲㚜⍇ 姕妰ᷳ䈡⿏⍲ ≇傥ˤ䫔⋩⚃㡅烉Ỷ≇䌯⮬柣暣㨇ᷳἧ䓐ᶵ⼿⼙枧梃凒⬱ℐ⍲⸚ 㒦⎰㱽忂ᾉ烊䴻䘤䎦㚱⸚㒦䎦尉㗪炻ㅱ䩳⌛ 䓐炻᷎㓡┬军䃉⸚㒦㗪㕡⼿两临 ἧ 䓐ˤ⇵枭⎰㱽忂ᾉ炻㊯ὅ暣ᾉ夷⭂ἄ㤕ᷳ䃉䶂暣ᾉˤỶ≇䌯⮬柣暣㨇枰⽵⍿⎰㱽 忂ᾉㆾⶍ㤕ˣ䥹⬠⍲慓䗪䓐暣㲊廣⮬⿏暣㨇姕⁁ᷳ⸚㒦ˤ
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2014:01:07 16:37:40+08:00 Modify Date : 2014:01:07 16:54:22+08:00 Metadata Date : 2014:01:07 16:54:22+08:00 Creator Tool : PScript5.dll Version 5.2 Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 6342 bytes, use -b option to extract) Document ID : uuid:37EACDF07677E311AE68DF23ADD6CBCE Instance ID : uuid:dedea665-bf4c-4ba4-8145-5cee54090343 Derived From Instance ID : uuid:880bb703-3c11-4979-ae23-167adf442a7b Derived From Document ID : xmp.did:FB35FDEE002BE311A2C0AD80B84CB9CA Derived From Rendition Class : proof:pdf Doc Change Count : 434 Format : application/pdf Title : DIR-516_Manual.pdf Creator : TracyTing Page Count : 77 Author : TracyTingEXIF Metadata provided by EXIF.tools