D Link IR605LB1 Wireless N 300 Cloud Router User Manual 15

D Link Corporation Wireless N 300 Cloud Router 15

User Manual

User ManualWireless N 300 Cloud Router Version 2.00 | 02/25/2013
iD-Link DIR-605L User ManualD-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.Manual RevisionsTrademarksD-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.Copyright © 2013 by D-Link Systems, Inc.All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc.Revision Date Description1.0 December 02, 2011 t'JSTUSFMFBTFWFSTJPO2.0 'FCSVBSZ t6QEBUFEGPSSFWJTJPO#Preface
iiD-Link DIR-605L User ManualTable of ContentsPreface................................................................................. iManual Revisions........................................................................... iTrademarks ...................................................................................... iPackage Contents.............................................................. 1System Requirements................................................................. 1'FBUVSFT............................................................................................ 2Hardware Overview.....................................................................3Connections ........................................................................... 3LEDs ........................................................................................... 4Installation ......................................................................... 5#FGPSFZPV#FHJO........................................................................... 5Wireless Installation Considerations...................................... 6Connect to Cable/DSL/Satellite Modem.............................. 7Conguration..................................................................... 8Web-based Conguration Utility............................................8Internet Setup......................................................................13Static (assigned by ISP)................................................13Dynamic ............................................................................14PPPoE ................................................................................15PPTP....................................................................................16L2TP ....................................................................................17Wireless Setup......................................................................18LAN Setup..............................................................................23DHCP Server Settings........................................................24Time and Date......................................................................25Parental Control ..................................................................261PSU'PSXBSEJOH ..................................................................27Application Rules................................................................28Access Control .....................................................................29Trac Control.......................................................................30'JSFXBMM%.;.....................................................................31Advanced Wireless .............................................................32Advanced Network ............................................................33Routing...................................................................................34Device Administration......................................................35Save and Restore.................................................................36'JSNXBSF6QEBUF ................................................................37DDNS Setting .......................................................................38System Check.......................................................................39Schedules ..............................................................................40Log Settings..........................................................................41Device Info ............................................................................42Log ...........................................................................................43Trac Statistics....................................................................44Active Session  .....................................................................44Table of Contents
iiiD-Link DIR-605L User ManualTable of ContentsWireless ..................................................................................45Help .........................................................................................46Wireless Security .............................................................47What is WEP? ................................................................................47Congure WEP.............................................................................48What is WPA?................................................................................49Congure WPA-PSK and WPA2-PSK .....................................50Congure WPA/WPA2-PSK ......................................................51Congure WPA, WPA2, and WPA/WPA2 (RADIUS)...........52Connect to a Wireless Network.......................................53Using Windows® XP ....................................................................53Congure WEP.............................................................................54Congure WPA-PSK....................................................................56Setting Up Wi-Fi Protection ............................................58(WCN 2.0 in Windows Vista) ............................................58*OJUJBM3PVUFS$POöHVSBUJPOGPS8J'J1SPUFDUJPO.............58Setting Up a Congured Router............................................59Changing the Computer Name and Joining a Workgroup.. 60Conguring the IP Address in Vista................................62Setting Up a Connection or Network Wirelessly ...........65Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK).............................................................70Connecting to an Unsecured Wireless Network............74Troubleshooting ..............................................................78Wireless Basics.................................................................82What is Wireless?.........................................................................83Tips...................................................................................................85Wireless Modes............................................................................86Networking Basics...........................................................87Check your IP address...............................................................87Statically Assign an IP address...............................................88Technical Specications..................................................89
1D-Link DIR-605L User ManualSection 1 - Product Overviewt%-JOL%*3-8JSFMFTT/$MPVE3PVUFSt1PXFS"EBQUFSt2VJDL*OTUBMMBUJPO(VJEFt&UIFSOFUDBCMFSystem Requirementst&UIFSOFUCBTFE$BCMFPS%4-.PEFNt $PNQVUFSTXJUI8JOEPXT®, Macintosh®, or Linux-based  operating systems with an installed Ethernet adaptert*OUFSOFU&YQMPSFSPS'JSFGPYPSBCPWFGPSDPOöHVSBUJPOPackage ContentsNote: Using a power supply with a dierent voltage rating than the one included with the DIR-605L will cause damage and void the warranty for this product.Note: Always attach the power cord plug to the power supply, before inserting the power cord and connected power supply to the wall outlet.
2D-Link DIR-605L User ManualSection 1 - Product Overviewt'BTUFS8JSFMFTT/FUXPSLJOH - The DIR-605L provides up to 300Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. t$PNQBUJCMFXJUICBOEH%FWJDFT - The DIR-605L is still fully compatible with the IEEE 802.11b and *&&&HTUBOEBSETPJUDBODPOOFDUXJUIFYJTUJOHCBOE*&&&H1$*64#BOE$BSECVTBEBQUFSTt$MPVE4FSWJDF - The DIR-605L features a new cloud service that pushes information such as rmware upgrade notications, user activity, and intrusion alerts, to the mydlink app on android and apple mobile devices. to insure that your router is up-to-date with the latest features, mydlink will notify you when an update is available for your router.   You can monitor a user’s online activity with real-time website browsing history, maintaining a safe and secure environment, especially for children at home.t&BTZ4FUVQ8J[BSE - Through its easy-to-use Web-based user interface, the DIR-605L lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company’s server. Congure your router to your specic settings within minutes.* Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.'FBUVSFT
3D-Link DIR-605L User ManualSection 1 - Product Overview1SFTTJOHUIF3FTFU#VUUPOSFTUPSFTUIFrouter to its original factory default settings.Receptor for the Power Adapter.The Auto MDI/MDIX WAN port is the connection for the Ethernet cable to the Cable or DSL modem.LAN PortsConnect Ethernet devices such as computers, switches, and hubs.)BSEXBSF0WFSWJFXConnections
4D-Link DIR-605L User ManualSection 1 - Product Overview)BSEXBSF0WFSWJFX-&%T*/5&3/&5A solid light indicates connection on the WAN port. This LED blinks during data transmission.8-"/-&%A solid light indicates that the wireless segment is ready. This LED blinks during wireless data transmission.-PDBM/FUXPSL-&%TA solid light indicates a connection to an Ethernet-enabled computer on ports 1-4. This LED blinks during  data transmission.1PXFS-&%A solid light indicates a proper connection to the power supply.
5D-Link DIR-605L User ManualSection 2 - InstallationBefore you BeginInstallationThis section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. Please congure the router with the computer that was last connected directly to your modem. Also, you can only use the &UIFSOFUQPSUPOZPVSNPEFN*GZPVXFSFVTJOHUIF64#DPOOFDUJPOCFGPSFVTJOHUIFSPVUFSUIFOZPVNVTUUVSOPòZPVSNPEFNEJTDPOOFDUUIF64#DBCMFBOEDPOOFDUBO&UIFSOFUDBCMFUPUIF8"/QPSUPOUIFSPVUFSBOEUIFOUVSOUIFNPEFNCBDLPO*OTPNFDBTFTZPVNBZOFFEUPDBMMZPVS*41UPDIBOHFDPOOFDUJPOUZQFT64#UP&UIFSOFU*GZPVIBWF%4-BOEBSFDPOOFDUJOHWJB111P&NBLFTVSFZPVEJTBCMFPSVOJOTUBMMBOZ111P&TPGUXBSFTVDIBT8JO1PFU#SPBEKVNQor Ethernet 300 from your computer or you will not be able to connect to the Internet.
6D-Link DIR-605L User ManualSection 2 - InstallationWireless Installation ConsiderationsThe D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, PSPUIFSPCKFDUTUIBUUIFXJSFMFTTTJHOBMTNVTUQBTTUISPVHINBZMJNJUUIFSBOHF5ZQJDBMSBOHFTWBSZEFQFOEJOHPOUIFUZQFTPGNBUFSJBMTBOECBDLHSPVOE3'SBEJPGSFRVFODZOPJTFJOZPVSIPNFPSCVTJOFTT5IFLFZUPNBYJNJ[JOHXJSFMFTTSBOHFJTUPfollow these basic guidelines:1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.2. #FBXBSFPG UIFEJSFDUMJOF CFUXFFOOFUXPSLEFWJDFT" XBMMUIBUJTGFFUUIJDLNFUFSTBU B45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. #VJMEJOH.BUFSJBMTNBLFBEJòFSFODF"TPMJENFUBMEPPSPSBMVNJOVNTUVETNBZIBWFBOFHBUJWFFòFDUPOrange. Try to position access points, wireless routers, and computers so that the signal passes through drywall PSPQFOEPPSXBZT.BUFSJBMTBOEPCKFDUTTVDIBTHMBTTTUFFMNFUBMXBMMTXJUIJOTVMBUJPOXBUFSöTIUBOLTmirrors, le cabinets, brick, and concrete will degrade your wireless signal.4.,FFQZPVSQSPEVDUBXBZBUMFBTUGFFUPSNFUFSTGSPNFMFDUSJDBMEFWJDFTPSBQQMJBODFTUIBUHFOFSBUF3'noise.5.*GZPVBSFVTJOH()[DPSEMFTTQIPOFTPS9XJSFMFTTQSPEVDUTTVDIBTDFJMJOHGBOTMJHIUTBOEIPNFTFDVSJUZTZTUFNTZPVSXJSFMFTTDPOOFDUJPONBZEFHSBEFESBNBUJDBMMZPSESPQDPNQMFUFMZ.BLFTVSFZPVS()[QIPOFbase is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
7D-Link DIR-605L User ManualSection 2 - InstallationIf you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:1. Place the router in an open and central location. Do not plug the power adapter into the router. 2. Turn the power o on your modem. If there is no on/o switch, then unplug the modem’s power adapter. Shut down your computer.3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the WAN port on the router.  4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port on your computer.5. Turn on or plug in your modem.  Wait for the modem to boot (about 30 seconds). 6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the router to boot. 7. Turn on your computer.  Verify the link lights on the router. The power light, Internet light, and the LAN light (the port that your computer is plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable connections are correct. 9. Skip to page 8 to congure your router. Connect to Cable/DSL/Satellite Modem
8D-Link DIR-605L User ManualSection 3 - CongurationCongurationThis section will show you how to congure your new D-Link wireless router using the web-based conguration utility.Web-based Conguration UtilityTo access the conguration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1) or http://dlinkrouter.
9D-Link DIR-605L User ManualSection 3 - CongurationSelect the type of Internet connection that Easy Setup Wizard detects, type in necessary information and then click Next to continue.If you selected PPPoE, enter your PPPoE username and password. Click Next to continue.Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.If you selected PPTP, enter your PPTP username and password. Click Next to continue.
10D-Link DIR-605L User ManualSection 3 - CongurationIf you selected L2TP, enter your L2TP username and password. Click Next to continue.If you selected Static, enter your network settings supplied by your Internet provider. Click Next to continue.*OUIFQBHFPGi$633&/5/&5803,4&55*/(wZPVXJMMTFFUIF*/5&3/&5TUBUVTJTiDPOOFDUFEw
11D-Link DIR-605L User ManualSection 3 - Conguration*GZPVIBWFOPUSFHJTUFSFEBNZEMJOLBDDPVOUQMFBTFDMJDLiDPOöHVSFw*OUIFsection “mydlink account’ and complete the registration form. $MJDLi3FHJTUFSwNow you can see the hint that a verication e-mail has been sent out. Open a new browser to login your e-mail account for receiving the verication mail.Once the account verication phase is complete, click "congure" In the section "mydlink account' and login mydlink account.Click "Login"
12D-Link DIR-605L User ManualSection 3 - CongurationNow the router has successfully connected to mydlink service. You can download the App "mydlink lite" from android market or apple store to TUBSUFOKPZNZEJOLTFSWJDF
13D-Link DIR-605L User ManualSection 3 - CongurationEnter the IP address assigned by your ISP.Enter the Subnet Mask assigned by your ISP.&OUFSUIF(BUFXBZBTTJHOFECZZPVS*41The default MAC Address is set to the WAN’s physical interface ."$BEESFTTPOUIF#SPBECBOE3PVUFS*UJTOPUSFDPNNFOEFEthat you change the default MAC address unless required by your ISP.The default MAC address is set to the WAN’s physical interface ."$BEESFTTPOUIF#SPBECBOE3PVUFS:PVDBOVTFUIFClone MAC Address button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless required by your ISP.Enter the Primary DNS server IP address assigned by your ISP.This is optional.Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1492 is the default MTU.IP Address:Subnet Mask:*41(BUFXBZMAC Address:Clone MAC Address:Primary DNS Address:Secondary DNS Address:MTU:Internet SetupStatic (assigned by ISP)Select Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the elds must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.DIR-605L
14D-Link DIR-605L User ManualSection 3 - CongurationChoose Dynamic IP Address to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for Cable modem services.The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed.The default MAC Address is set to the WAN’s physical interface ."$BEESFTTPOUIF#SPBECBOE3PVUFS*UJTOPUSFDPNNFOEFEthat you change the default MAC address unless required by your ISP.The default MAC address is set to the WAN’s physical interface ."$BEESFTTPOUIF#SPBECBOE3PVUFS:PVDBOVTFUIFi$MPOF."$"EESFTTwCVUUPOUPDPQZUIF."$BEESFTTPGUIF&UIFSOFUCard installed by your ISP and replace the WAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless required by your ISP.Enter the DNS (Domain Name Server) server IP address assigned by your ISP. Dynamic IP Address:Host Name:MAC Address:Internet SetupDynamicClone MAC Address: DNS Addresses:MTU: Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specic ISP.Access Point Mode:Checking this box disables NAT and turns the Router into an Access Point only.  To manually set up the Internet connection, click the Manual Internet Connection Setup button on the Router’s opening window.DIR-605L
15D-Link DIR-605L User ManualSection 3 - CongurationSelect Dynamic (most common) or Static. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.Enter your PPPoE user name.Enter your PPPoE password and then retype the password in the next box.Enter the ISP Service Name (optional).Enter the IP address (Static PPPoE only).Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only).Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specic ISP. 1492 is the default MTU.Select either "MXBZTPO,Manual, or Connect-on demand.111P&User Name:1BTTXPSEService Name:IP Address:DNS Addresses:Maximum Idle Time:MTU:Connection Mode Select:Internet Setup111P&Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.DIR-605L
16D-Link DIR-605L User ManualSection 3 - CongurationSelect Dynamic (most common) or Static. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.Enter the IP address (Static PPTP only).Enter the Primary and Secondary DNS Server Addresses (Static PPTP only).&OUFSUIF(BUFXBZ*1"EESFTTQSPWJEFECZZPVS*41The DNS server information will be supplied by your ISP (Inter-net Service Provider.)Enter the Server IP provided by your ISP (optional).Enter your PPTP account name.Enter your PPTP password and then retype the password in the next box.Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.Maximum Transmission Unit - You may need to change the MTU for optimal performance. Select either Always-on, Manual, or Connect-on demand.PPTP:IP Address:Subnet Mask:(BUFXBZDNS:Internet SetupPPTPChoose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Server IP:PPTP Account:11511BTTXPSEMaximum Idle Time:MTU:Connect Mode:DIR-605L
17D-Link DIR-605L User ManualSection 3 - CongurationSelect Dynamic (most common) or Static. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.Enter the IP address (Static L2TP only).Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).&OUFSUIF(BUFXBZ*1"EESFTTQSPWJEFECZZPVS*41The DNS server information will be supplied by your ISP (Inter-net Service Provider.)Enter the Server IP provided by your ISP (optional).Enter your L2TP account name.Enter your L2TP password and then retype the password in the next box.Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specic ISP. Select either Always-on, Manual, or Connect-on demand.L2TP:IP Address:Subnet Mask:(BUFXBZDNS:Server IP:L2TP Account:-511BTTXPSEMaximum Idle Time:MTU:Connect Mode:Internet SetupL2TPChoose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. DIR-605L
18D-Link DIR-605L User ManualSection 3 - CongurationWireless SetupWireless settings for the router may be configured manually or by using a wizard. To use the wizard, click the 8JSFMFTT$POOFDUJPO4FUVQ8J[BSE button and then follow the steps that are described below. To congure the wireless settings manually, click the Manual Wireless Connection Setup button. The parameters for this window are described later in this section. The Wireless Security section that directly follows this Conguration section provides  additional explanation for how to congure the WEP, WPA, WPA2, and WPA/WPA2 wireless security mode options. Click Next to continue.Enter a Wireless Network Name in the textbox, which is also known as the SSID, and then click Next to continue.DIR-605L
19D-Link DIR-605L User ManualSection 3 - CongurationEnter a Wireless Security Password in the textbox and then click Next to continue.This window displays a summary of your wireless security settings. Please print this out or record this information in a safe place and then click Save to continue.The Router will save your new settings and reboot. When it is nished after 1-2 minutes, the opening Wireless Setup window is displayed.
20D-Link DIR-605L User ManualSection 3 - Conguration5PJNQMFNFOU8J'JQSPUFDUJPOPS8$/UJDLUIF&OBCMFcheckbox, click either (FOFSBUF/FX1*/or Reset PIN to DefaultBOEUIFODPOöHVSFUIF8J'JTFUUJOHTCFMPX1MFBTFTFFUIF4FUUJOH6Q8J'J1SPUFDUJPO 8$/JO8JOEPXTVista) section later in this manual for detailed conguration information. Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions.Service Set Identier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The SSID is case-sensitive.*OEJDBUFTUIFDIBOOFMTFUUJOHGPSUIF%*3-#ZEFGBVMUthe channel is set to 6. The Channel can be changed to t the channel setting for an existing wireless network or to customize the wireless network. The "VUP$IBOOFM4FMFDUJPOsetting can be selected to allow the DIR-605L to choose the channel with the least amount of interference.8J'J1SPUFDUFESetup:&OBCMF8JSFMFTT$IBOOFM8JSFMFTT/FUXPSLName:Transmission Rate:8..&OBCMF&OBCMF8JSFMFTT&OBCMF)JEEFOWireless:DIR-605LUse the drop-down menu to select the appropriate Transmission Rate in Mbits per second. Many users will want to use the default setting, Best (automatic).&OBCMF8J'J.VMUJNFEJBUPFOKPZCBTJDRVBMJUZPGTFSWJDFGFBUVSFT8..QSJPSJUJ[FTUSBóDBDDPSEJOHUPGPVSBDDFTTDBUFHPSJFTWPJDFvideo, best eort, and background. Check this option if you would not like the SSID of your wireless network to be broadcasted by the DIR-605L. If this option is checked, the SSID of the DIR-605L will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-605L in order to connect to it.
21D-Link DIR-605L User ManualSection 3 - Conguration1. To enable wireless security on the Router, use the drop-down menu to select the desired option. To enable WEP, select Enable WEP Wireless Security (basic).2. Next to "VUIFOUJDBUJPO, select either Open   or Shared Key. Shared Key provides greater security.3. Select either 64Bit or 128Bit encryption from the drop-down menu next to 8&1&ODSZQUJPO.4. Next to Default Key Type, select WEP Key 1 and enter a WEP key that you create. Make sure you enter this key exactly on all your wireless devices. You may enter up to four dierent keys either using Hex or ASCII. HexJTSFDPNNFOEFEMFUUFST"'BOEOVNCFSTBSFWBMJEIn ASCII all numbers and letters are valid.5. Click Save Settings to save your settings. If you are conguring the Router with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the Router. /05&It is recommended to enable encryption on your wireless Router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
22D-Link DIR-605L User ManualSection 3 - Conguration1. To enable WPA, WPA2, or WPA/WPA2, select either Enable WPA Only Wireless Security (enhanced), Enable WPA2 Only Wireless Security (enhanced), orEnable WPA/WPA2 Wireless Security (enhanced).2. Next to $JQIFS5ZQF, select TKIP,AES,orBoth.3. Next to 14,&"1, select PSK.4. Next to /FUXPSL,FZ, enter a passphrase. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols  @BOETQBDFT.BLFTVSFZPVFOUFSUIJTLFZexactly the same on all other wireless clients.5. Click Save Settings to save your settings. If you are conguring the router with a wireless adapter, you will lose connectivity until you enable WPA, WPA2, or WPA/WPA2 (whichever of the three options you have selected above) on your adapter and enter the same network key as you did on the router.
23D-Link DIR-605L User ManualSection 3 - CongurationThis section will allow you to change the local network settings of the router and to congure the DHCP settings.LAN SetupEnter the IP address of the router. The default IP address is 192.168.0.1.If you change the IP address, once you click Apply,you will need to enter the new IP address in your browser to get back into the conguration utility.Enter the Subnet Mask. The default subnet mask is 255.255.255.0.Enter the Domain name (Optional).Check the box to transfer the DNS server information from your ISP to your computers. If unchecked, your computers will use the router for a DNS server.Router IP Address:Default Subnet Mask:Local Domain Name:&OBCMF%/43FMBZRefer to the next page for DHCP information.DIR-605L
24D-Link DIR-605L User ManualSection 3 - CongurationCheck the box to enable the DHCP server on your router. Uncheck to disable this function.Enter the starting and ending IP addresses for the DHCP server’s IP assignment.The length of time for the IP address lease. Enter the Lease time in minutes.&OBCMF%)$1Server:DHCP IPAddress Range:DHCP Lease Time:DHCP Server SettingsDHCP stands for Dynamic Host Control Protocol. The DIR-605L has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers POUIF -"/QSJWBUFOFUXPSL#F TVSFUPTFUZPVScomputers to be DHCP clients by setting their TCP/IP TFUUJOHTUPi0CUBJOBO*1"EESFTT"VUPNBUJDBMMZw8IFOyou turn your computers on, they will automatically load the proper TCP/IP settings provided by the DIR-605L. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.
25D-Link DIR-605L User ManualSection 3 - CongurationThis section will allow you to congure, update, and maintain the correct time on the internal system clock.Time and Date4FMFDUUIF5JNF;POFGSPNUIFESPQEPXONFOVTicking this checkbox enables Daylight Saving time. Click Sync. your computer’s time settingsto copy your PC’s time settings.Tick the “Automatically synchronize with D-Link’s *OUFSOFUUJNFTFSWFSwDIFDLCPYBOEUIFOVTFUIFdrop-down menu to select an NTP Server. NTP is short for Network Time Protocol. NTP synchronizes computer clock times in a network of computers. To manually input the time, enter the values in these elds for the Year, Month, Day, Hour, Minute, and Second. Click Save Settings.Time Zone:&OBCMF%BZMJHIU Saving:NTPServerUsed:Manual:DIR-605L
26D-Link DIR-605L User ManualSection 3 - CongurationThis feature allows you to create a list of websites that you want to either allow or deny users access.Parental Control4FMFDU5VSO1BSFOUBM$POUSPM0''5VSO1BSFOUBMControl ON and ALLOW computers access to ONLY these sites, or Turn Parental Control ON and DENY computers access to ONLY these sites.Enter the keywords or URLs that you want to block (or allow). Any URL with the keyword in it will be blocked.The schedule of time when the parental control lter will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Maintenance > 4DIFEVMFT section.Congure Parental Control:Website URL:4DIFEVMFDIR-605L
27D-Link DIR-605L User ManualSection 3 - Conguration1PSU'PSXBSEJOHThis will allow you to open a single port or a range of ports.Check the box to enabled the rule. Enter a name for the rule.Enter the IP address of the computer on your local network that you want to allow the incoming service to.Enter the port or ports that you want to open. If you want to open one port, enter the same port in both boxes.Select TCP, UDP, or AnyRule:Name:IP Address:Start Port/&OE1PSUTrac Type:DIR-605L
28D-Link DIR-605L User ManualSection 3 - CongurationApplication RulesSome applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have diculties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DIR-605L.Check the box to enable the rule. Enter a name for the rule.This is the port used to trigger the application. It can be either a single port or a range of ports.This is the port number on the WAN side that will be used to access the application. You may dene a single port or a range of ports. You can use a comma to add multiple ports or port ranges.Select TCP, UDP, or Any.Rule:Name:Trigger Port:'JSFXBMM1PSUTrac Type:DIR-605L
29D-Link DIR-605L User ManualSection 3 - CongurationAccess Control4FMFDU5VSO."$'JMUFSJOH0''5VSO."$'JMUFSJOH0/and ALLOW computers listed to access the network, PS5VSO."$'JMUFSJOH0/BOE%&/:DPNQVUFSTMJTUFEto access the network. Enter the MAC address you would like to lter.To nd the MAC address on a computer, please refer to UIF/FUXPSLJOH#BTJDTTFDUJPOJOUIJTNBOVBMSelect a DHCP client from the drop-down menu and click the arrow to copy that MAC Address. The schedule of time when the network lter will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Maintenance > 4DIFEVMFT section.Congure MAC 'JMUFSMAC Address: DHCP Client List:4DIFEVMF6TF."$.FEJB"DDFTT$POUSPM'JMUFSTUPBMMPXPSEFOZ-"/-PDBM"SFB/FUXPSLDPNQVUFSTCZUIFJS."$BEESFTTFTGSPNaccessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are DVSSFOUMZDPOOFDUFEUPUIF#SPBECBOE3PVUFSDIR-605L
30D-Link DIR-605L User ManualSection 3 - CongurationTrac ControlTrac control can be used to distribute download bandwidth automatically  according to the requirements of the users, and the users also can setup manually. Enable Trac Control: Select this function to control the access bandwidth of computer in LAN.Select this function to control the access bandwidth of computer in LAN. All the computers in LAN will be distributed the bandwidth equally.Key in the value to setup the bandwidth manually.8IFOUIFPQUJPO"VUPNBUJD%JTUSJCVUF#BOEXJEUIJTunchecked, you can control the access bandwidth of the specic IP address. &OBCMF5SBóDControl:Automatic Distribute #BOEXJEUILFZJOCBOEXJEUImanually: Trac Control Rules:DIR-605L
31D-Link DIR-605L User ManualSection 3 - Conguration'JSFXBMM%.;5IJTTFDUJPOXJMMBMMPXZPVUPTFUVQB%.;IPTUBOEUPTFUVQöSFXBMMSVMFTIf you have a client PC that cannot run Internet applications properly from behind the DIR-605L, then you can set the client up for unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful for gaming purposes. &OUFSUIF*1BEESFTTPGUIFJOUFSOBMDPNQVUFSUIBUXJMMCFUIF%.;IPTU"EEJOHBDMJFOUUPUIF%.;%FNJMJUBSJ[FE;POFNBZexpose your local network to a variety of security risks, so only use this option as a last resort.Check this to enable SPI.$IFDLUIJTCPYUPFOBCMF%.;Enter the IP address of the computer you would like to open all ports to.Choose a name for the rewall rule.Select to Allow or Deny transport of the data packets according to the criteria dened in the rule. The Source/Destination is the TCP/UDP port on either the LAN or WAN side.Click "EE/FX to access the Schedules window. See .BJOUFOBODF4DIFEVMFT for more information.Enter a beginning and ending IP address.Select the transport protocol that will be used for the lter rule.Enter the desired port range for the lter rule.&OBCMF%.;)PTUDMZ IP Address:Name:Action:Source/Dest:4DIFEVMFIP Address:Protocol:Port Range:&OBCMF41* DIR-605L
32D-Link DIR-605L User ManualSection 3 - CongurationSet the transmit power of the antennas.#FBDPOTBSFQBDLFUTTFOUCZBO"DDFTT1PJOUUPTZODISPOJ[FBXJSFMFTTOFUXPSLSpecify a value. 100 is the default setting and is recommended. This value should remain at its default setting of 2346. If inconsistent data ow is a problem, only a minor modication should be made.The fragmentation threshold, which is specied in bytes, determines whether packets will be fragmented. Packets exceeding the 2346 byte setting will be fragmented before transmission. 2346 is the default setting. (Delivery Traffic Indication Message) 1 is the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages.Select Short or Long Preamble. The Preamble denes the length of the CRC block (Cyclic Redundancy Check is a common technique for detecting data transmission errors) for communication between the wireless router and the roaming wireless network adapters. Auto is the default setting. Note: High network trac areas should use the shorter preamble type.5SBOTNJU1PXFSBeacon interval:3545ISFTIPME'SBHNFOUBUJPODTIM Interval:Preamble Type:CTS Mode:.PEF$IBOOFM8JEUI4IPSU(*Advanced WirelessThis window allows you to change the behavior of the 802.11g wireless radio from the standard settings. Please be aware that any changes to the factory default settings may adversely aect the behavior of your network.  DIR-605LCTS (Clear To Send) is a function used to minimize collisions among wireless devices on a wireless local area network (LAN). CTS will make sure the wireless network is clear before a wireless client attempts to send wireless data. Enabling CTS will add overhead and may lower wireless through put. None: CTS is typically used JOBQVSFHFOWJSPONFOU*G$54JTTFUUPi/POFwJOBNJYFENPEFFOWJSPONFOUQPQVMBUFECZCDMJFOUTXJSFMFTTDPMMJTJPOTNBZPDDVSGSFRVFOUMZ"MXBZTCTS will always be used to make sure the wireless LAN is clear before sending data. Auto: CTS will monitor the wireless network and automatically decide whether to implement CTS based on the amount of trac and collisions that occurs on the wireless network.Select one of the following:.JYFEHBOEC - Select if you are using both 802.11b and 802.11g wireless clients.O0OMZ - Select only if all of your wireless clients are 802.11n..JYFEOCBOEH - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.Select the Channel Width:Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices..)[ - Select if you are not using any 802.11n wireless clients. This is the default setting. Check this box to reduce the guard interval time therefore increasing the data capacity.  However, it’s less reliable and may create higher data loss.
33D-Link DIR-605L User ManualSection 3 - CongurationTo use the Universal Plug and Play (UPnP™) feature tick this checkbox. UPNP provides compatibility with networking equipment, software and peripherals.Unchecking the box will not allow the DIR-605L to SFTQPOEUP1JOHT#MPDLJOHUIF 1JOHNBZQSPWJEFsome extra security from hackers. Tick this checkbox UPBMMPXUIF8"/QPSUUPCFi1JOHFEwYou may set the port speed of the WAN port to 10Mbps,100Mbps, or 10/100Mbps Auto. Some older cable or DSL modems may require you to set the port speed to 10Mbps.&OBCMF61O1&OBCMF8"/ Ping Respond:WAN Port Speed:"EWBODFE/FUXPSLThis window allows you to change the LAN settings. Please be aware that any changes to the factory default settings may aect the behavior of your network.DIR-605L
34D-Link DIR-605L User ManualSection 3 - CongurationTick this checkbox to enable or disable xed routes to dened destinations.Use the drop-down menu to choose the WAN or WAN (Physical Port) Interface the IP packet must use to transit out of the Router.The IP address of the packets that will take this route.The subnet of the IP address of the packets that will take this route.Species the next hop to be taken if this route is used. &OBCMFInterface:Destination:Subnet Mask:(BUFXBZRoutingThis option allows you to dene xed routes to dened destinations.DIR-605L
35D-Link DIR-605L User ManualSection 3 - CongurationEnter a new Login Name for the Administrator account.Enter a new password for the Administrator Login Name and then retype the new password in the Conrm Password textbox. The administrator can make changes to the settings.Remote management allows the DIR-605L to be congured from the Internet by a web browser. A username and password is still required to access the Web-Management interface. In general, only a member of your network can browse the built-in web pages to perform Administrator tasks. This feature enables you to perform Administrator tasks from the remote (Internet) host.The Internet IP address of the computer that has access to the #SPBECBOE3PVUFS*GZPVJOQVUBOBTUFSJTLJOUPUIJTöFMEthen any computer will be able to access the Router. Putting an asterisk (*) into this eld would present a security risk and is not recommended.5IFQPSUOVNCFSVTFEUPBDDFTTUIF%*3-'PSFYBNQMFhttp://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of the DIR-605L and 8080 is the port used for the Web-Management interface.Administrator Login Name:Administrator 1BTTXPSE&OBCMF3FNPUFManagement:*1"MMPXFEUPAccess:Port:Device AdministrationThis window will allow you to change the Administrator password. You can also enable Remote Management.  DIR-605L
36D-Link DIR-605L User ManualSection 3 - CongurationSave and RestoreUse this option to save the current router conguration settings to a le on the hard disk of the computer you BSFVTJOH'JSTUDMJDLUIFSave button. You will then see a le dialog, where you can select a location and le name for the settings. Use this option to load previously saved router DPOöHVSBUJPOTFUUJOHT'JSTUVTFUIF#SPXTF control to nd a previously save le of conguration settings. Then, click the Upload Settings button to transfer those settings to the Router. This option will restore all conguration settings back to the settings that were in eect at the time the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router conguration settings, use the Save button above. Click the Reboots button on the left side of the window to restart the Router.Save Settings to Local Hard Drive:Load Settings from Local Hard Drive:Restore to 'BDUPSZ%FGBVMUSettings:Reboots:This window allows you to save your conguration le to a hard drive, load conguration settings from a hard drive, and restore the Router’s factory default settings.DIR-605L
37D-Link DIR-605L User ManualSection 3 - Conguration'JSNXBSF6QEBUFClick the $IFDL/PX button (or the link at the top of the window) to nd out if there is an updated rmware; if so, download the new rmware to your hard drive.After you have downloaded the new rmware, click #SPXTF in this window to locate the rmware update on your hard drive.  Click Save Settings to complete the rmware upgrade.'JSNXBSFUpgrade:#SPXTFYou can upgrade the rmware of the Router here. Make sure the rmware you want to use is on the local hard drive of the computer. Click on #SPXTF to locate the rmware le to be used for the update. Please check the D-Link support site for rmware updates at http://support.dlink.com. You can download rmware upgrades to your hard drive from the D-Link support site.DIR-605L
38D-Link DIR-605L User ManualSection 3 - CongurationDDNS SettingTick the Enable DDNS checkbox to enable support for DDNS.Select one of the DDNS registration organizations form those listed in the pull-down menu. Available servers include dlinkddns.com(Free), DynDns.org(Custom), Dyn.Dns.org(free), and Dyn.Dns.org(Static).Enter the host name of the DDNS server.Enter the username given to you by your DDNS server.Enter the password or key given to you by your DDNS server.&OBCMF%%/4Server Address:Host Name:Username:1BTTXPSEThe router supports DDNS (Dynamic Domain Name Service). The Dynamic DNS service allows a dynamic public IP address to be associated with a static host name in any of the many domains, allowing access to a specied host from various locations on UIF*OUFSOFU5IJTJTFOBCMFEUPBMMPXSFNPUFBDDFTTUPBIPTUCZDMJDLJOHBIZQFSMJOLFE63-JOUIFGPSNiIPTUOBNFEZOEOTPSHwMany ISPs assign public IP addresses using DHCP, this can make it dicult to locate a specic host on the LAN using standard DNS. If for example you are running a public web server or VPN server on your LAN, this ensures that the host can be located from the Internet if the public IP address changes. DDNS requires that an account be setup with one of the supported DDNS providers.DIR-605L
39D-Link DIR-605L User ManualSection 3 - Conguration4ZTUFN$IFDLVCT is an advanced feature that integrates a LAN cable tester on every Ethernet port on the router. Through UIFHSBQIJDBMVTFSJOUFSGBDF(6*7$5DBOCFVTFEto remotely diagnose and report cable faults such as opens, shorts, swaps, and impedance mismatch. This feature signicantly reduces service calls and returns by allowing users to easily troubleshoot their cable connections.The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping.Virtual Cable Tester (VCT) Info:Ping Test:This tool is used to verify the physical connectivity on both the LAN and the WAN interfaces. The Ping Test can be used to test the status of the Internet.DIR-605L
40D-Link DIR-605L User ManualSection 3 - Conguration4DIFEVMFTEnter a name for the new schedule rule.Choose the desired day(s), either All Week or Select Days. If the latter is selected, please use the checkboxes directly below to specify the individual days.Tick this check box if the new schedule rule applies to the full 24-hour period.If the new schedule rule does not apply to the full 24-hour period, untick the previous checkbox and then enter a specic beginning and ending time. Name:Day(s):"MM%BZISTStart Time/&OE5JNFThe Router allows the user the ability to manage schedule rules for various rewall and parental control features on this window. Once you have nished conguring the new schedule rule, click the Save Settings button at the top of the window. DIR-605L
41D-Link DIR-605L User ManualSection 3 - CongurationLog SettingsClick on the Save button link on this window to save the log le to your local hard drive.click the checkbox to save the log in the log server in the LAN side.Click the checkbox(es) of the type of log information requested: i4ZTUFN'JSFXBMM 4FDVSJUZ 3PVUFS4UBUVT$SJUJDBM8BSOJOHBOE*OGPSNBUJPOwEnter the your SNTP server name(or IP address) and enter your mail address before sending your system log by mail.4BWF-PH'JMFSyslog Server:-PH5ZQF-FWFMSend by Mail:The system log displays chronological event log data specied by the router user. You may also save a simple text le containing the log to your computer. Click the Save button and follow the prompts to save the le.DIR-605L

Navigation menu