D Link IR835A1 Wireless N750 Dual-Band Router User Manual

D Link Corporation Wireless N750 Dual-Band Router

User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1570901
Application ID	4i8xZXUozwgsoWqaBRd/GQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	439.01kB (5487601 bits)
Date Submitted	2011-10-31 00:00:00
Date Available	2011-10-31 00:00:00
Creation Date	2011-10-14 16:22:12
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2011-10-27 16:10:33
Document Title	User Manual
Document Creator	Adobe InDesign CS4 (6.0)

Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any
person or organization of such revisions or changes.
Manual Revisions
Revision
Date
1.0
October 12, 2011
Description
• Initial release
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of
their respective companies.
Copyright © 2011 by D-Link Systems, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission
from D-Link Systems, Inc.
D-Link DIR-835 User Manual
Table of Contents
Table of Contents
Preface.................................................................................. i
Manual Revisions............................................................................ i
Trademarks....................................................................................... i
Product Overview............................................................... 1
Package Contents.......................................................................... 1
System Requirements.................................................................. 2
Introduction.................................................................................... 3
Features............................................................................................. 4
Hardware Overview...................................................................... 5
Connections............................................................................ 5
LEDs............................................................................................ 6
Installation.......................................................................... 7
Before you Begin............................................................................ 7
Wireless Installation Considerations....................................... 8
Connect to Cable/DSL/Satellite Modem............................... 9
Connect to Another Router.....................................................10
Getting Started.............................................................................12
Configuration....................................................................13
Quick Setup Wizard.....................................................................13
Web-based Configuration Utility...........................................16
Internet Connection Setup..............................................17
Static (assigned by ISP).................................................18
Static IP...............................................................................18
Dynamic (Cable)..............................................................19
PPPoE (DSL).......................................................................20
D-Link DIR-835 User Manual
PPTP.....................................................................................21
L2TP.....................................................................................23
DS-Lite................................................................................25
Wireless Settings..................................................................26
Manual Wireless Settings..................................................27
802.11n/g (2.4GHz)........................................................27
802.11n/a (5GHz)............................................................29
Network Settings.................................................................31
Router Settings................................................................31
DHCP Server Settings....................................................32
DHCP Reservation..........................................................34
Media Server.................................................................................35
IPv6...................................................................................................36
IPv6 Internet Connection Setup Wizard......................37
IPv6 Manual Setup..............................................................42
Auto Detection................................................................42
Static IPv6..........................................................................43
Autoconfiguration..........................................................44
PPPoE..................................................................................45
IPv6 in IPv4 Tunneling...................................................47
6 to 4 Tunneling...............................................................48
6rd........................................................................................49
Link-Local Connectivity................................................50
Advanced.......................................................................................51
Virtual Server.........................................................................51
Port Forwarding...................................................................53
ii
Table of Contents
Application Rules.................................................................54
QoS Engine............................................................................55
Network Filters......................................................................57
Access Control......................................................................58
Access Control Wizard...................................................58
Website Filters.......................................................................61
Inbound Filters.....................................................................62
Firewall Settings...................................................................63
Routing....................................................................................64
Advanced Wireless..............................................................65
Advanced Wireless Settings.............................................66
802.11n/g (2.4GHz)........................................................66
802.11n/a (5GHz)............................................................67
Wi-Fi Protected Setup (WPS)...........................................68
Advanced Network Settings............................................70
UPnP....................................................................................70
Internet Ping Block.........................................................70
Internet Port Speed........................................................70
Multicast Streams...........................................................70
Guest Zone.............................................................................71
IPv6 Firewall...........................................................................72
IPv6 Routing..........................................................................73
Tools.................................................................................................74
Admin......................................................................................74
Time..........................................................................................75
SysLog......................................................................................76
Email Settings.......................................................................77
System.....................................................................................78
Language Pack......................................................................79
D-Link DIR-835 User Manual
Firmware.................................................................................79
Dynamic DNS........................................................................80
System Check........................................................................82
Schedules...............................................................................83
Status...............................................................................................84
Device Info.............................................................................84
Logs..........................................................................................85
Statistics..................................................................................86
Internet Sessions..................................................................87
Routing....................................................................................88
Wireless...................................................................................89
IPv6...........................................................................................90
IPV6 Routing..........................................................................91
Support...................................................................................92
Wireless Security..............................................................93
What is WPA?.................................................................................93
Wireless Security Setup Wizard..............................................94
Add Wireless Device with WPS Wizard.................................96
Configure WPA-Personal (PSK)................................................97
Configure WPA-Enterprise (RADIUS).....................................98
Connect to a Wireless Network......................................100
Using Windows® 7.................................................................... 100
Configure WPS................................................................... 103
Windows Vista®.......................................................................... 107
Configure Wireless Security.......................................... 108
Connect Using WCN 2.0 in Windows Vista® . ..... 110
Windows® XP.............................................................................. 111
Configure WPA-PSK.......................................................... 112
iii
Table of Contents
Troubleshooting.............................................................114
Wireless Basics................................................................118
What is Wireless?....................................................................... 119
Tips................................................................................................. 121
Wireless Modes.......................................................................... 122
Networking Basics..........................................................123
Check your IP address............................................................. 123
Statically Assign an IP address............................................. 124
Technical Specifications.................................................125
Contacting Technical Support.......................................126
Warranty..........................................................................127
Registration....................................................................135
D-Link DIR-835 User Manual
iv
Section 1 - Product Overview
Product
PackageOverview
Contents
DIR-835 Wireless N750 Dual Band Router
Ethernet Cable
Three Detachable Antennas
Power Adapter
CD-ROM with Manual and Setup Wizard
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a different voltage rating than the one included with the DIR-835 will cause damage and void the warranty for this product.
D-Link DIR-835 User Manual
Section 1 - Product Overview
System Requirements
Network Requirements
• An Ethernet-based Cable or DSL modem
• IEEE 802.11n or 802.11g wireless clients
• IEEE 802.11a wireless clients
• 10/100/1000 Ethernet
Computer with the following:
• Windows®, Macintosh, or Linux-based operating system
• An installed Ethernet adapter
Web-based Configuration
Utility Requirements
Browser Requirements:
• Internet Explorer 6 or higher
• Firefox 3.0 or higher
• Safari 3.0 or higher
• Chrome 2.0 or higher
Windows® Users: Make sure you have the latest version of Java
installed. Visit www.java.com to download the latest version.
CD Installation Wizard
Requirements
D-Link DIR-835 User Manual
Computer with the following:
• Windows® 7, Vista®, or XP (Service Pack 2 or higher)
• An installed Ethernet adapter
• CD-ROM drive
Section 1 - Product Overview
Introduction
TOTAL PERFORMANCE
Combines award winning router features and IEEE 802.11a/g/n wireless technology to provide the best wireless performance.
TOTAL SECURITY
The most complete set of security features including Active Firewall and WPA/WPA2 to protect your network against outside intruders.
TOTAL COVERAGE
Provides greater wireless signal rates even at farther distances for best-in-class Whole Home Coverage.
ULTIMATE PERFORMANCE
The D-Link Wireless N750 Dual Band Router (DIR-835) is an 802.11n/802.11a compliant device that delivers real world performance of up to
13x faster than an 802.11g wireless connection (also faster than a 100Mbps wired Ethernet connection). Create a secure wireless network
to share photos, files, music, video, printers, and network storage throughout your home. Connect the DIR-835 router to a cable or DSL
modem and share your high-speed Internet access with everyone on the network. In addition, this Router includes a Quality of Service
(QoS) engine that keeps digital phone calls (VoIP) and online gaming smooth and responsive, providing a better Internet experience.
EXTENDED WHOLE HOME COVERAGE
Powered by Wireless N technology, this high performance router provides superior Whole Home Coverage while reducing dead spots.
The router is designed for use in bigger homes and for users who demand higher performance networking. Add a Wireless N notebook
or desktop adapter and stay connected to your network from virtually anywhere in your home.
TOTAL NETWORK SECURITY
The Wireless N router supports all of the latest wireless security features to prevent unauthorized access, be it from over the wireless
network or from the Internet. Support for WPA/WPA2 standards ensure that you’ll be able to use the best possible encryption method,
regardless of your client devices. In addition, this router utilizes dual active firewalls (SPI and NAT) to prevent potential attacks from
across the Internet.
* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will
adversely affect wireless signal range.
D-Link DIR-835 User Manual
Section 1 - Product Overview
Features
• Faster Wireless Networking - The DIR-835 provides up to 750Mbps* combined wireless bandwidth with other
802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video
streaming, online gaming, and real-time audio. The performance of this 802.11n wireless router gives you the
freedom of wireless networking at speeds 13x faster than 802.11g.
• Compatible with 802.11a/g Devices - The DIR-835 is still fully compatible with the IEEE 802.11g and 802.11a
standards, so it can connect with existing 802.11g and 802.11a PCI, USB, and Cardbus adapters.
• Advanced Firewall Features - The Web-based user interface displays a number of advanced network
management features including:
• Content Filtering - Easily applied content filtering based on MAC Address, URL, and/or Domain
Name.
• Filter Scheduling - These filters can be scheduled to be active on certain days or for a duration of
hours or minutes.
• Secure Multiple/Concurrent Sessions - The DIR-835 can pass through VPN sessions. It supports
multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-835 can securely access
corporate networks.
• User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DIR-835 lets you control what
information is accessible to those on the wireless network, whether from the Internet or from your company’s
server. Configure your router to your specific settings within minutes.
* Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11a, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will
adversely affect wireless signal range.
D-Link DIR-835 User Manual
Section 1 - Product Overview
Hardware Overview
Connections
LAN Ports (1-4)
Internet Port
The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL
modem.
USB Port
Connect a USB 1.1 or 2.0 flash drive to configure the wireless settings using WCN and
SharePort.
Reset Button
Pressing the Reset button restores the router to its original factory default settings.
Power Button
Press the power button to power on and off.
Power Receptor
D-Link DIR-835 User Manual
Connect 10/100/1000 Ethernet devices such as computers, switches, and NAS.
Receptor for the supplied power adapter.
Section 1 - Product Overview
Hardware Overview
LEDs
Power LED
Internet LED
D-Link DIR-835 User Manual
A solid green light indicates a proper connection to the power supply.
A solid green light indicates connection on the Internet port. This LED blinks during data transmission.
Section 2 - Installation
Installation
This section will walk you through the installation process. Placement of the router is very important. Do not place the router
in an enclosed area such as a closet, cabinet, or in the attic or garage.
Before you Begin
• Please configure the router with the computer that was last connected directly to your modem.
• You can only use the Ethernet port on your modem. If you were using the USB connection before using the
router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the
Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to
change connection types (USB to Ethernet).
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as
WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.
• When running the Setup Wizard from the D-Link CD, make sure the computer you are running the CD from
is connected to the Internet and online or the wizard will not work. If you have disconnected any hardware,
re-connect your computer back to the modem and make sure you are online.
D-Link DIR-835 User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the
operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings,
or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types
of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to
follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each
wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number
of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle
appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position
devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range.
Try to position access points, wireless routers, and computers so that the signal passes through drywall or open
doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file
cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF
noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security
systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone
base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not
in use.
D-Link DIR-835 User Manual
Section 2 - Installation
Connect to Cable/DSL/Satellite Modem
If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:
1. Place the router in an open and central location. Do not plug the power adapter into the router.
2. Unplug the modem’s power adapter. Shut down your computer.
3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into
the Internet port on the router.
4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port
on your computer.
5. Plug in your modem. Wait for the modem to boot (about 30 seconds).
6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the
router to boot.
7. Turn on your computer.
8. Refer to page 13 to configure your router.
D-Link DIR-835 User Manual
Section 2 - Installation
Connect to Another Router
If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have to do
the following before connecting the router to your network:
• Disable UPnP™
• Disable DHCP
• Change the LAN IP address to an available address on your network. The LAN ports on the router cannot accept
a DHCP address from your other router.
To connect to another router, please follow the steps below:
1. Plug the power into the router. Connect one of your computers to the router (LAN port) using an Ethernet cable. Make sure
your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the Networking Basics
section for more information. If you need to change the settings, write down your existing settings before making any
changes. In most cases, your computer should be set to receive an IP address automatically in which case you will not have
to do anything to your computer.
2. Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user name to
Admin and leave the password box empty. Click Log In to continue.
3. Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settings to
continue.
4. Click Setup and then click Network Settings. Uncheck the Enable DHCP Server checkbox. Click Save Settings to
continue.
5. Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save Settings to save your
settings. Use this new IP address to access the configuration utility of the router in the future. Close the browser and change
your computer’s IP settings back to the original values as in Step 1.
D-Link DIR-835 User Manual
10
Section 2 - Installation
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network.
7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug anything
into the Internet (WAN) port of the D-Link router.
8. You may now use the other 3 LAN ports to connect other Ethernet devices and computers. To configure your wireless network,
open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and Wireless Security
sections for more information on setting up your wireless network.
D-Link DIR-835 User Manual
11
Section 2 - Installation
Getting Started
The DIR-835 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to guide you
quickly through the installation process.
Insert the Quick Router Setup Wizard CD in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows®
XP. The steps and screens are similar for the other Windows operating systems.
If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type “D:\autorun.exe”
(where D: represents the drive letter of your CD-ROM drive).
When the autorun screen appears, click Install.
Note: It is recommended to write down the SSID and Security Key, followed by the login password on the provided CD holder.
D-Link DIR-835 User Manual
12
Section 3 - Configuration
Configuration
This section will show you how to configure your new D-Link wireless router using the web-based configuration utility.
Quick Setup Wizard
To access the configuration utility, open a web-browser such
as Internet Explorer and enter the IP address of the router
(192.168.0.1).
You may also connect using the NetBIOS name in the address bar
(http://dlinkrouter).
This wizard is designed to guide you through a step-by
step process to configure your new D-Link router and
connect to the Internet.
Click Next to continue.
D-Link DIR-835 User Manual
13
Section 3 - Configuration
Please wait while your router detects your internet
connection type.
Please give your network a name using up to 32 characters.
Click Next to continue.
In order to secure your new networking device, please enter
a password and click Next.
D-Link DIR-835 User Manual
14
Section 3 - Configuration
Select your time zone from the drop-down menu and click
Next to continue.
Once this screen appears, your setup is complete. Click Save
& Connect to reboot the router.
D-Link DIR-835 User Manual
15
Section 3 - Configuration
Web-based Configuration Utility
To access the configuration utility, open a web-browser such
as Internet Explorer and enter the IP address of the router
(192.168.0.1).
If you selected Cancel Setup on the Quick Setup Wizard
page, you will be directed to this screen.
Select Admin from the drop-down menu and then enter
your password. Leave the password blank by default.
If you get a Page Cannot be Displayed error, please refer
to the Troubleshooting section for assistance.
D-Link DIR-835 User Manual
16
Section 3 - Configuration
Internet Connection Setup
Select the Internet Connection you would like to use.
Click Manual Internet Connection Setup to configure your
connection manually and continue on pg 18.
If you want to configure your router to connect to the Internet
using the wizard, click Internet Connection Setup Wizard.
You will be directed to the Quick Setup Wizard section on
pg 13.
D-Link DIR-835 User Manual
17
Section 3 - Configuration
Internet Setup
Static (assigned by ISP)
Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask,
gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which
are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
IP Address: Enter the IP address assigned by your ISP.
Subnet Mask: Enter the Subnet Mask assigned by your ISP.
Default Gateway: Enter the Gateway assigned by your ISP.
DNS Servers: The DNS server information will be supplied by your ISP (Internet Service
Provider.)
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1500 is the default MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface
MAC address on the Broadband Router. It is not recommended that you
change the default MAC address unless required by your ISP. You can use
the Clone Your PC’s MAC Address button to replace the Internet port’s
MAC address with the MAC address of your Ethernet card.
D-Link DIR-835 User Manual
18
Section 3 - Configuration
Dynamic (Cable)
My Internet Select Dynamic IP (DHCP) to obtain IP Address information automatically from your
Connection: ISP. Select this option if your ISP does not give you any IP numbers to use. This option
is commonly used for cable modem services such as Comcast and Cox.
Advanced Domain Name System (DNS) services enhances your Internet performance by
Enable getting you the information and web pages you are looking for faster and more reliably.
Advanced In addition, it improves your overall Internet experience by correcting many common typo
DNS Service: mistakes automatically, taking you where you intended to go and saving you valuable time.
Disclaimer: D-Link makes no warranty as to the availability, reliability, functionality and
operation of the Advanced DNS service or its features.
Host Name: The Host Name is optional but may be required by some ISPs. Leave blank if you are
not sure.
Use Unicasting: Check the box if you are having problems obtaining an IP address from your ISP.
Primary/ Enter the Primary and secondary DNS server IP addresses assigned by your ISP. These
Secondary DNS addresses are usually obtained automatically from your ISP. Leave at 0.0.0.0 if you did
not specifically receive these from your ISP.
Server:
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance
with your specific ISP. 1500 is the default MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on
the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC
Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
D-Link DIR-835 User Manual
19
Section 3 - Configuration
Internet Setup
PPPoE (DSL)
Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a
username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your
computer. The software is no longer needed and will not work through a router.
My Internet Select PPPoE (Username/Password) from the drop-down menu.
Connection:
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic.
IP Address: Enter the IP address (Static PPPoE only).
User Name: Enter your PPPoE user name.
Password: Enter your PPPoE password and then retype the password in the next box.
Service Name: Enter the ISP Service Name (optional).
Reconnect Select either Always-on, On-Demand, or Manual.
Mode:
Maximum Idle Enter a maximum idle time during which the Internet connection is
Time: maintained during inactivity. To disable this feature, enable Auto-reconnect.
DNS Addresses: Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only).
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal
performance with your specific ISP. 1492 is the default MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC
address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP.
You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your
Ethernet card.
D-Link DIR-835 User Manual
20
Section 3 - Configuration
Internet Setup
PPTP
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
Address Mode: Select Static if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In
most cases, select Dynamic.
PPTP IP Address: Enter the IP address (Static PPTP only).
PPTP Subnet Enter the Primary and Secondary DNS Server
Mask: Addresses (Static PPTP only).
PPTP Gateway: Enter the Gateway IP Address provided by your ISP.
PPTP Server IP: Enter the Server IP provided by your ISP (optional).
Username: Enter your PPTP username.
Password: Enter your PPTP password and then retype the
password in the next box.
Reconnect Select either Always-on, On-Demand, or Manual.
Mode:
Maximum Idle Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Time: Auto-reconnect.
DNS Servers: The DNS server information will be supplied by your ISP (Internet Service Provider.)
D-Link DIR-835 User Manual
21
Section 3 - Configuration
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default
MTU.
MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to
replace the Internet port’s MAC address with the MAC address of your Ethernet card.
D-Link DIR-835 User Manual
22
Section 3 - Configuration
Internet Setup
L2TP
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and
password. This option is typically used for DSL services.
Address Mode: Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases,
select Dynamic.
L2TP IP Address: Enter the L2TP IP address supplied by your ISP (Static only).
L2TP Subnet Enter the Subnet Mask supplied by your ISP (Static only).
Mask:
L2TP Gateway: Enter the Gateway IP Address provided by your ISP.
L2TP Server IP: Enter the Server IP provided by your ISP (optional).
Username: Enter your L2TP username.
Password: Enter your L2TP password and then retype the password in
the next box.
Reconnect Select either Always-on, On-Demand, or Manual.
Mode:
Maximum Idle Enter a maximum idle time during which the Internet
Time: connection is maintained during inactivity. To disable this
feature, enable Auto-reconnect.
DNS Servers: Enter the Primary and Secondary DNS Server Addresses (Static
L2TP only).
D-Link DIR-835 User Manual
23
Section 3 - Configuration
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default
MTU.
Clone MAC The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended
Address: that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to
replace the Internet port’s MAC address with the MAC address of your Ethernet card.
D-Link DIR-835 User Manual
24
Section 3 - Configuration
Internet Setup
DS-Lite
Another Internet Connection type is DS-Lite.
DS-Lite is an IPv6 connection type. After selecting DS-Lite, the following parameters will be available for configuration:
DS-Lite Select the DS-Lite DHCPv6 option to let the router allocate the
Configuration: AFTR IPv6 address automatically. Select the Manual Configuration
to enter the AFTR IPv6 address in manually.
AFTR IPv6 After selecting the Manual Configuration option above, enter the
Address: AFTR IPv6 address used here.
B4 IPv4 Address: Enter the B4 IPv4 address value used here.
WAN IPv6 Once connected, the WAN IPv6 address will be displayed here.
Address:
IPv6 WAN Once connected, the IPv6 WAN Default Gateway address will be
Default Gateway displayed here.
D-Link DIR-835 User Manual
25
Section 3 - Configuration
Wireless Settings
If you want to configure the wireless settings on your router using
the wizard, click Wireless Security Setup Wizard and refer to
page 94.
Click Add Wireless Device with WPS if you want to add a wireless
device using Wi-Fi Protected Setup (WPS) and refer to page 96.
If you want to manually configure the wireless settings on your
router click Manual Wireless Network Setup and refer to the
next page.
D-Link DIR-835 User Manual
26
Section 3 - Configuration
Manual Wireless Settings
802.11n/g (2.4GHz)
Enable Wireless: Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all the
wireless functions.
Schedule: Select the time frame that you would like your wireless
network enabled. The schedule may be set to Always. Any
schedule you create will be available in the drop-down menu.
Click Add New to create a new schedule.
Wireless Network Service Set Identifier (SSID) is the name of your wireless
Name: network. Create a name using up to 32 characters. The SSID
is case-sensitive.
802.11 Mode: Select one of the following:
802.11g Only - Select if all of your wireless clients are 802.11g.
Mixed 802.11n and 802.11g - Select if you are using both
802.11n and 802.11g wireless clients.
802.11n Only - Select only if all of your wireless clients are 802.11n.
Enable Auto The Auto Channel Scan setting can be selected to allow the DIR-835 to choose the channel with the least amount of interference.
Channel Scan:
Wireless Channel: Indicates the channel setting for the DIR-835. By default the channel is set to 6. The Channel can be changed to fit the channel
setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will
be greyed out.
Transmission Rate: Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance.
Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
D-Link DIR-835 User Manual
27
Section 3 - Configuration
Channel Width: 20MHz - Select if you are not using any 802.11n wireless clients.
40MHz - Select if you are using 802.11n wireless clients only.
Visibility Status: Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-835. If Invisible is selected, the
SSID of the DIR-835 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-835 in
order to connect to it.
Wireless Security: Refer to page 93 for more information regarding wireless security.
D-Link DIR-835 User Manual
28
Section 3 - Configuration
802.11n/a (5GHz)
Enable Wireless: Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions.
Schedule: Select the time frame that you would like your wireless
network enabled. The schedule may be set to Always. Any
schedule you create will be available in the drop-down
menu. Click Add New to create a new schedule.
Wireless Service Set Identifier (SSID) is the name of your wireless
Network Name: network. Create a name using up to 32 characters. The
SSID is case-sensitive.
802.11 Mode: Select one of the following:
802.11a Only - Select if all of your wireless clients are
802.11a.
Mixed 802.11n and 802.11a - Select if you are using
both 802.11n and 802.11a wireless clients.
802.11n Only - Select only if all of your wireless clients are 802.11n.
Enable Auto The Auto Channel Scan setting can be selected to allow the DIR-835 to choose the channel with the least amount of interference.
Channel Scan:
Wireless Indicates the channel setting for the DIR-835. By default the channel is set to 6. The Channel can be changed to fit the channel
Channel: setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will
be greyed out.
Transmission Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance.
Rate:
D-Link DIR-835 User Manual
29
Section 3 - Configuration
Channel Width: Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
40MHz - Select if you are using 802.11n wireless clients only.
Visibility Status: Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-835. If Invisible is selected, the
SSID of the DIR-835 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-835 in
order to connect to it.
Wireless Security: Refer to page 93 for more information regarding wireless security.
D-Link DIR-835 User Manual
30
Section 3 - Configuration
Network Settings
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Router Settings
Router IP Address: Enter the IP address of the router. The default IP address
is 192.168.0.1.
If you change the IP address, once you click Save Settings,
you will need to enter the new IP address in your browser
to get back into the configuration utility.
Subnet Mask: Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Local Domain: Enter the Domain name (Optional).
Enable DNS Relay: Uncheck the box to transfer the DNS server information
from your ISP to your computers. If checked, your
computers will use the router for a DNS server.
D-Link DIR-835 User Manual
31
Section 3 - Configuration
DHCP Server Settings
DHCP stands for Dynamic Host Control Protocol. The DIR-835 has a built-in DHCP server. The DHCP Server will automatically
assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting
their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load
the proper TCP/IP settings provided by the DIR-835. The DHCP Server will automatically allocate an unused IP address from
the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.
Enable DHCP Check this box to enable the DHCP server on your router.
Server: Uncheck to disable this function.
DHCP IP Address Enter the starting and ending IP addresses for the DHCP server’s
Range: IP assignment.
Note: If you statically (manually) assign IP addresses to your
computers or devices, make sure the IP addresses are outside of
this range or you may have an IP conflict.
DHCP Lease Time: The length of time for the IP address lease. Enter the Lease time
in minutes.
Always Enable this feature to broadcast your networks DHCP server to
Broadcast: LAN/WLAN clients.
NetBIOS NetBIOS allows LAN hosts to discover all other computers within
Announcement: the network, enable this feature to allow the DHCP Server to
offer NetBIOS configuration settings.
Learn NetBIOS Enable this feature to allow WINS information to be learned from the WAN side, disable to allow manual configuration.
from WAN:
NetBIOS Scope: This feature allows the configuration of a NetBIOS ‘domain’ name under which network hosts operates. This setting has no effect if
the ‘Learn NetBIOS information from WAN’ is activated.
D-Link DIR-835 User Manual
32
Section 3 - Configuration
NetBIOS Node: Select the different type of NetBIOS node; Broadcast only, Point-to-Point, Mixed-mode, and Hybrid.
WINS IP Enter your WINS IP address.
Address:
D-Link DIR-835 User Manual
33
Section 3 - Configuration
DHCP Reservation
If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router
will assign the IP address only to that computer or device.
Note: This IP address must be within the DHCP IP Address Range.
Enable: Check this box to enable the reservation.
Computer Enter the computer name or select from the drop
Name: down menu and click <<.
IP Address: Enter the IP address you want to assign to the
computer or device. This IP Address must be within
the DHCP IP Address Range.
MAC Address: Enter the MAC address of the computer or device.
Copy Your PC’s If you want to assign an IP address to the computer
MAC Address: you are currently on, click this button to populate the
fields.
Save: Click Save to save your entry. You must click Save
Settings at the top to activate your reservations.
D-Link DIR-835 User Manual
34
Section 3 - Configuration
Media Server
This feature allows you to share music, pictures and videos with any devices connected to your network.
Enable Media Check this box to enable the media server feature.
Server:
Computer Enter the media server’s name.
Name:
Click Save to save your entry. You must click Save
Settings at the top to activate your reservations.
D-Link DIR-835 User Manual
35
Section 3 - Configuration
IPv6
On this page, the user can configure the IPv6 Connection type. There are two ways to set up the IPv6 Internet connection. You
can use the Webbased IPv6 Internet Connection Setup Wizard, or you can manually configure the connection.
IPv6 Internet Connection Setup Wizard
For the beginner user that has not configured a router before, click
on the IPv6 Internet Connection Setup Wizard button and the router
will guide you through a few simple steps to get your network up and
running.
Manual IPv6 Internet Connection Option
For the advanced user that has configured a router before, click on
the Manual IPv6 Internet Connection Setup button to input all the
settings manually.
D-Link DIR-835 User Manual
36
Section 3 - Configuration
IPv6 Internet Connection Setup Wizard
On this page, the user can configure the IPv6 Connection type. There are two ways to set up the IPv6 Internet connection. You can use the Webbased IPv6 Internet Connection Setup Wizard, or you can manually configure the connection.
Click the IPv6 Internet Connection Setup Wizard button and the router will guide
you through a few simple steps to get your network up and running.
The wizard will guide you through a step-by-step process to configure your new
D-Link router and connect to the IPv6 Internet.
Click Next to continue to the next page. Click Cancel to discard the changes
made and return to the main page.
D-Link DIR-835 User Manual
37
Section 3 - Configuration
The router will try to detect whether its possible to obtain the IPv6 Internet
connection type automatically. If this succeeds then the user will be guided
through the input of the appropriate parameters for the connection type found.
However, if the automatic detection fails, the user will be prompt to either Try
again or to click on the Guide me through the IPv6 settings button to initiate the
manual continual of the wizard.
D-Link DIR-835 User Manual
38
Section 3 - Configuration
There are several connection types to choose from. If you are unsure of your
connection method, please contact your IPv6 Internet Service Provider.
Note: If using the PPPoE option, you will need to ensure that any PPPoE client
software on your computers has been removed or disabled. The 3 options available
on this page are IPv6 over PPPoE, Static IPv6 address and Route, and Tunneling
Connection.
Choose the required IPv6 Internet Connection type and click on the Next button
to continue. Click on the Prev button to return to the previous page. Click on the
Cancel button to discard all the changes made and return to the main page.
IPv6 over PPPoE
After selecting the IPv6 over PPPoE option, the user will be able to configure the
IPv6 Internet connection that requires a username and password to get online.
Most DSL modems use this type of connection.
The following parameters will be available for configuration:
PPPoE Session: Select the PPPoE Session value used here. This option will
state that this connection shares it’s information with the
already configured IPv6 PPPoE connection, or the user can
create a new PPPoE connection here.
User Name: Enter the PPPoE username used here. If you do not know
your user name, please contact your ISP.
Password: Enter the PPPoE password used here. If you do not know
your password, please contact your ISP.
Verify Password: Re-enter the PPPoE password used here.
Service Name: Enter the service name for this connection here. This option
is optional.
Click on the Next button to continue. Click on the Prev button to return to the previous page.
Click on the Cancel button to discard all the changes made and return to the main page.
D-Link DIR-835 User Manual
39
Section 3 - Configuration
Static IPv6 Address Connection
This mode is used when your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your
IPv6 configuration settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS
Server. Your ISP provides you with all this information.
Use Link-Local The Link-local address is used by nodes and routers when communicating
Address: with neighboring nodes on the same link. This mode enables IPv6capable devices to communicate with each other on the LAN side.
IPv6 Address: Enter the WAN IPv6 address for the router here.
Subnet Prefix Enter the WAN subnet prefix length value used here.
Length:
Default Gateway: Enter the WAN default gateway IPv6 address used here.
Primary IPv6 DNS Enter the WAN primary DNS Server address used here.
Address:
Secondary IPv6 DNS Enter the WAN secondary DNS Server address used here.
Address:
LAN IPv6 Address: These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The router’s LAN IPv6 Address configuration is based on the IPv6
Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.)
Click on the Next button to continue. Click on the Prev button to return to the previous page.
Click on the Cancel button to discard all the changes made and return to the main page.
D-Link DIR-835 User Manual
40
Section 3 - Configuration
Tunneling Connection (6rd)
After selecting the Tunneling Connection (6rd) option, the user can
configure the IPv6 6rd connection settings.
The following parameters will be available for configuration:
6rd IPv6 Prefix: Enter the 6rd IPv6 address and prefix value used
here.
IPv4 Address: Enter the IPv4 address used here.
Mask Length: Enter the IPv4 mask length used here.
Assigned IPv6 Displays the IPv6 assigned prefix value here.
Prefix:
6rd Border Relay Enter the 6rd border relay IPv4 address used here.
IPv4 Address:
IPv6 DNS Server: Enter the primary DNS Server address used here.
Click on the Next button to continue. Click on the Prev button to return to the previous page.
Click on the Cancel button to discard all the changes made and return to the main page.
The IPv6 Internet Connection Setup Wizard was completed.
Click on the Connect button to continue. Click on the Prev button to return to the
previous page. Click on the Cancel button to discard all the changes made and return
to the main page.
D-Link DIR-835 User Manual
41
Section 3 - Configuration
IPv6 Manual Setup
There are several connection types to choose from: Auto Detection, Static IPv6, Autoconfiguration (SLAAC/DHCPv6), PPPoE,
IPv6 in IPv4 Tunnel, 6to4, 6rd, and Link-local. If you are unsure of your connection method, please contact your IPv6 Internet
Service Provider.
Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed
or disabled.
Auto Detection
Select Auto Detection to have the router detect and
automatically configure your IPv6 setting from your ISP.
D-Link DIR-835 User Manual
42
Section 3 - Configuration
Static IPv6
My IPv6 Connection: Select Static IPv6 from the drop-down menu.
WAN IPv6 Address Enter the address settings supplied by your Internet provider
Settings: (ISP).
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address: Displays the Router’s LAN Link-Local Address.
Enable Check to enable the Autoconfiguration feature.
Autoconfiguration:
Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC +
Stateless DHCPv6.
IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your local
Start: computers.
IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local
End: computers.
IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes).
D-Link DIR-835 User Manual
43
Section 3 - Configuration
Autoconfiguration
My IPv6 Connection: Select Autoconfiguration (Stateless/DHCPv6) from the dropdown menu.
IPv6 DNS Settings: Select either Obtain DNS server address automatically or Use
the following DNS Address.
Primary/Secondary DNS Enter the primary and secondary DNS server addresses.
Address:
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address: Displays the Router’s LAN Link-Local Address.
Enable Check to enable the Autoconfiguration feature.
Autoconfiguration:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Autoconfiguration Type: DHCPv6.
IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your local
Start: computers.
IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local
End: computers.
IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes).
D-Link DIR-835 User Manual
44
Section 3 - Configuration
PPPoE
My IPv6 Connection: Select PPPoE from the drop-down menu.
PPPoE: Enter the PPPoE account settings supplied by your Internet provider
(ISP).
Address Mode: Select Static if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic.
IP Address: Enter the IP address (Static PPPoE only).
User Name: Enter your PPPoE user name.
Password: Enter your PPPoE password and then retype the password in the next
box.
Service Name: Enter the ISP Service Name (optional).
Reconnection Mode: Select either Always-on, On-Demand, or Manual.
Maximum Idle Time: Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable Autoreconnect.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1492 is the default MTU.
IPv6 DNS Settings: Select either Obtain DNS server address automatically or Use the
following DNS Address.
Primary/Secondary DNS Enter the primary and secondary DNS server addresses.
Address:
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address: Displays the Router’s LAN Link-Local Address.
Enable Check to enable the Autoconfiguration feature.
Autoconfiguration:
D-Link DIR-835 User Manual
45
Section 3 - Configuration
Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6.
IPv6 Address Range Start: Enter the start IPv6 Address for the DHCPv6 range for your local computers.
IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your local computers.
IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes).
D-Link DIR-835 User Manual
46
Section 3 - Configuration
IPv6 in IPv4 Tunneling
My IPv6 Select IPv6 in IPv4 Tunnel from the drop-down menu.
Connection:
IPv6 in IPv4 Tunnel Enter the settings supplied by your Internet provider (ISP).
Settings:
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Displays the Router’s LAN Link-Local Address.
Address:
Enable Check to enable the Autoconfiguration feature.
Autoconfiguration:
Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Type: DHCPv6.
IPv6 Address Enter the start IPv6 Address for the DHCPv6 range for your local
Range Start: computers.
IPv6 Address Enter the end IPv6 Address for the DHCPv6 range for your local
Range End: computers.
Pv6 Address Enter the Router Advertisement Lifetime (in minutes).
Lifetime:
D-Link DIR-835 User Manual
47
Section 3 - Configuration
6 to 4 Tunneling
My IPv6 Connection: Select 6 to 4 from the drop-down menu.
6 to 4 Settings: Enter the IPv6 settings supplied by your Internet provider (ISP).
Primary/Secondary Enter the primary and secondary DNS server addresses.
DNS Address:
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Displays the Router’s LAN Link-Local Address.
Address:
Enable Check to enable the Autoconfiguration feature.
Autoconfiguration:
Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Type: DHCPv6.
IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your local
Start: computers.
IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local
End: computers.
IPv6 Address Enter the IPv6 Address Lifetime (in minutes).
Lifetime:
D-Link DIR-835 User Manual
48
Section 3 - Configuration
6rd
My IPv6 Connection: Select 6rd from the drop-down menu.
6RD Settings: Enter the address settings supplied by your Internet provider
(ISP).
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN Link-Local Address: Displays the Router’s LAN Link-Local Address.
Enable Check to enable the Autoconfiguration feature.
Autoconfiguration:
Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC+RDNSS or SLAAC + Stateless
DHCPv6.
Router Advertisement Enter the Router Advertisement Lifetime (in minutes).
Lifetime:
D-Link DIR-835 User Manual
49
Section 3 - Configuration
Link-Local Connectivity
My IPv6 Connection: Select Link-Local Only from the drop-down
menu.
LAN IPv6 Address Displays the IPv6 address of the router.
Settings:
D-Link DIR-835 User Manual
50
Section 3 - Configuration
Advanced
Virtual Server
The DIR-835 can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address
can be automatically redirected to local servers in the LAN (Local Area Network).
The DIR-835 firewall feature filters out unrecognized packets to protect your LAN network so all computers networked with
the DIR-835 are invisible to the outside world. If you wish, you can make some of the LAN computers accessible from the
Internet by enabling Virtual Server. Depending on the requested service, the DIR-835 redirects the external service request to
the appropriate server within the LAN network.
The DIR-835 is also capable of port-redirection meaning incoming traffic to a particular port may be redirected to a different
port on the server computer.
Each virtual service that is created will be listed at the bottom of the screen in the Virtual Servers List. There are pre-defined
virtual services already in the table. You may use them by enabling them and assigning the server IP to use that particular
virtual service.
For a list of ports for common applications, please visit http://support.dlink.com/faq/view.asp?prod_id=1191.
D-Link DIR-835 User Manual
51
Section 3 - Configuration
This will allow you to open a single port. If you would like to open a range of ports, refer to the next page.
Name: Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click << to populate the fields.
IP Address: Enter the IP address of the computer on your local
network that you want to allow the incoming
service to. If your computer is receiving an IP
address automatically from the router (DHCP), you
computer will be listed in the “Computer Name”
drop-down menu. Select your computer and click
<<.
Private Port/ Enter the port that you want to open next to Private
Public Port: Port and Public Port. The private and public ports
are usually the same. The public port is the port
seen from the Internet side, and the private port
is the port being used by the application on the
computer within your local network.
Protocol Type: Select TCP, UDP, or Both from the drop-down
menu.
Schedule: The schedule of time when the Virtual Server Rule
will be enabled. The schedule may be set to Always,
which will allow the particular service to always be
enabled. You can create your own times in the Tools
> Schedules section.
Inbound Filter: Select Allow All (most common) or a created
Inbound filter. You may create your own inbound
filters in the Advanced > Inbound Filter page.
D-Link DIR-835 User Manual
52
Section 3 - Configuration
Port Forwarding
This will allow you to open a single port or a range of ports.
Name: Enter a name for the rule or select an application
from the drop-down menu. Select an application
and click << to populate the fields.
IP Address: Enter the IP address of the computer on your local
network that you want to allow the incoming service
to. If your computer is receiving an IP address
automatically from the router (DHCP), you computer
will be listed in the “Computer Name” drop-down
menu. Select your computer and click <<.
TCP/UDP: Enter the TCP and/or UDP port or ports that you
want to open. You can enter a single port or a range
of ports. Separate ports with a common.
Example: 24,1009,3000-4000
Schedule: The schedule of time when the Virtual Server Rule
will be enabled. The schedule may be set to Always,
which will allow the particular service to always be
enabled. You can create your own times in the Tools
> Schedules section.
Inbound Filter: Select Allow All (most common) or a created
Inbound filter. You may create your own inbound
filters in the Advanced > Inbound Filter page.
D-Link DIR-835 User Manual
53
Section 3 - Configuration
Application Rules
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others.
These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of
these applications work with the DIR-835. If you need to run applications that require multiple connections, specify the port
normally associated with an application in the “Trigger Port” field, select the protocol type as TCP or UDP, then enter the firewall
(public) ports associated with the trigger port to open them for inbound traffic.
The DIR-835 provides some predefined applications in the table on the bottom of the web page. Select the application you
want to use and enable it.
Name: Enter a name for the rule. You may select a
pre-defined application from the drop-down menu
and click <<.
Trigger: This is the port used to trigger the application. It
can be either a single port or a range of ports.
Traffic Type: Select the protocol of the trigger port (TCP, UDP,
or Both).
Firewall: This is the port number on the Internet side that
will be used to access the application. You may
define a single port or a range of ports. You can use
a comma to add multiple ports or port ranges.
Traffic Type: Select the protocol of the firewall port (TCP, UDP,
or Both).
Schedule: The schedule of time when the Application Rule
will be enabled. The schedule may be set to Always,
which will allow the particular service to always
be enabled. You can create your own times in the
Tools > Schedules section.
D-Link DIR-835 User Manual
54
Section 3 - Configuration
QoS Engine
The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are
disabled and application priority is not classified automatically.
Enable Traffic This option is disabled by default. Enable this option for
Shaping: better performance and experience with online games and
other interactive applications, such as VoIP.
Automatic Uplink This option is enabled by default when the QoS Engine
Speed: option is enabled. This option will allow your router to
automatically determine the uplink speed of your Internet
connection.
Measured Uplink This displays the detected uplink speed.
Speed:
Manual Uplink The speed at which data can be transferred from the router
Speed: to your ISP. This is determined by your ISP. ISP’s often speed
as a download/upload pair. For example, 1.5Mbits/284Kbits.
Using this example, you would enter 284. Alternatively you
can test your uplink speed with a service such as www.
dslreports.com.
Connection Type: By default, the router automatically determines whether
the underlying connection is an xDSL/Frame-relay network
or some other connection type (such as cable modem or
Ethernet), and it displays the result as Detected xDSL or
Frame Relay Network. If you have an unusual network connection in which you are actually connected via xDSL but for which you
configure either “Static” or “DHCP” in the Internet settings, setting this option to xDSL or Other Frame Relay Network ensures that
the router will recognize that it needs to shape traffic slightly differently in order to give the best performance. Choosing xDSL or
Other Frame Relay Network causes the measured uplink speed to be reported slightly lower than before on such connections, but
gives much better results.
Detected Network When Connection Type is set to automatic, the automatically detected connection type is displayed here.
Type: This option is disabled by default. Enable this option for better performance and experience with online games and other interactive
applications, such as VoIP.
D-Link DIR-835 User Manual
55
Section 3 - Configuration
Enable QoS This option is enabled by default. This will allow your router to automatically determine the network priority of running
Engine: programs.
Automatic This option should be enabled when you have a slow Internet uplink. It helps to reduce the impact that large low priority network
Classification: packets can have on more urgent ones.
D-Link DIR-835 User Manual
56
Section 3 - Configuration
Network Filters
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.
Configure MAC Select Turn MAC Filtering Off, Allow MAC
Filtering: addresses listed below, or Deny MAC addresses
listed below from the drop-down menu.
MAC Address: Enter the MAC address you would like to filter.
To find the MAC address on a computer, please
refer to the Networking Basics section in this
manual.
DHCP Client: Select a DHCP client from the drop-down menu
and click << to copy that MAC Address.
Clear: Click to remove the MAC address.
D-Link DIR-835 User Manual
57
Section 3 - Configuration
Access Control
The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls to
only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like P2P
utilities or games.
Add Policy: Click the Add Policy button to start the Access
Control Wizard.
Access Control Wizard
Click Next to continue with the wizard.
D-Link DIR-835 User Manual
58
Section 3 - Configuration
Enter a name for the policy and then click Next to continue.
Select a schedule (I.E. Always) from the drop-down menu and
then click Next to continue.
Enter the following information and then click Next to continue.
• Address Type - Select IP address, MAC address, or Other
Machines.
• IP Address - Enter the IP address of the computer you want to
apply the rule to.
• Machine Address - Enter the PC MAC address (i.e. 00:00.00.00.00).
Select the filtering method and then click Next to continue.
D-Link DIR-835 User Manual
59
Section 3 - Configuration
Enter the rule:
Enable - Check to enable the rule.
Name - Enter a name for your rule.
Dest IP Start - Enter the starting IP address.
Dest IP End - Enter the ending IP address.
Protocol - Select the protocol.
Dest Port Start - Enter the starting port number.
Dest Port End - Enter the ending port number.
To enable web logging, click Enable.
Click Save to save the access control rule.
Your newly created policy will now show up under Policy Table.
D-Link DIR-835 User Manual
60
Section 3 - Configuration
Website Filters
Website Filters are used to allow you to set up a list of Web sites that can be viewed by multiple users through the network.
To use this feature select to Allow or Deny, enter the domain or website and click Save Settings. You must also select Apply
Web Filter under the Access Control section (page 45).
Add Website Select Allow or Deny.
Filtering Rule:
Website URL/ Enter the keywords or URLs that you want to allow
Domain: or block. Click Save Settings.
D-Link DIR-835 User Manual
61
Section 3 - Configuration
Inbound Filters
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can
configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual
Server, Port Forwarding, or Remote Administration features.
Name: Enter a name for the inbound filter rule.
Action: Select Allow or Deny.
Enable: Check to enable rule.
Remote IP Start: Enter the starting IP address. Enter 0.0.0.0 if you
do not want to specify an IP range.
Remote IP End: Enter the ending IP address. Enter 255.255.255.255
if you do not want to specify and IP range.
Add: Click the Add button to apply your settings. You
must click Save Settings at the top to save the
settings.
Inbound Filter This section will list any rules that are created. You
Rules List: may click the Edit icon to change the settings or
enable/disable the rule, or click the Delete icon
to remove the rule.
D-Link DIR-835 User Manual
62
Section 3 - Configuration
Firewall Settings
A firewall protects your network from the outside world. The DIR-835 offers a firewall type functionality. The SPI feature helps
prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain types of applications.
If you choose to expose a computer, you can enable DMZ. DMZ is short for Demilitarized Zone. This option will expose the
chosen computer completely to the outside world.
Enable SPI: SPI (Stateful Packet Inspection, also known as dynamic packet filtering)
helps to prevent cyber attacks by tracking more state per session. It
validates that the traffic passing through the session conforms to the
protocol.
NAT Endpoint Select one of the following for TCP and UDP ports:
Filtering: Endpoint Independent - Any incoming traffic sent to an open port
will be forwarded to the application that opened the port. The port
will close if idle for 5 minutes.
Address Restricted - Incoming traffic must match the IP address of
the outgoing connection.
Address + Port Restriction - Incoming traffic must match the IP address
and port of the outgoing connection.
Anti-Spoof Check: Enable this feature to protect your network from certain kinds of
“spoofing” attacks.
Enable DMZ: If an application has trouble working from behind the router, you can
expose one computer to the Internet and run the application on that
computer.
Note: Placing a computer in the DMZ may expose that computer to a
variety of security risks. Use of this option is only recommended as a last
resort.
DMZ IP Address: Specify the IP address of the computer on the LAN that you want to have unrestricted Internet communication. If this computer
obtains it’s IP address automatically using DHCP, be sure to make a static reservation on the Setup > Network Settings page so
that the IP address of the DMZ machine does not change.
D-Link DIR-835 User Manual
63
Section 3 - Configuration
Routing
The Routing option is an advanced method of customizing specific routes of data through your network.
Destination IP: Enter the IP address of packets that will take this
route.
Netmask: Enter the netmask of the route, please note
that the octets must match your destination IP
address.
Gateway: Enter your next hop gateway to be taken if this
route is used.
Metric: The route metric is a value from 1 to 16 that
indicates the cost of using this route. A value 1 is
the lowest cost and 15 is the highest cost.
Interface: Select the interface that the IP packet must use to
transit out of the router when this route is used.
D-Link DIR-835 User Manual
64
Section 3 - Configuration
Advanced Wireless
Transmit Power: Set the transmit power of the antennas.
WLAN Partition: This enables 802.11d operation. 802.11d is a wireless
specification developed to allow implementation of wireless
networks in countries that cannot use the 802.11 standard.
This feature should only be enabled if you are in a country
that requires it.
WMM Enable: WMM is QoS for your wireless network. This will improve
the quality of video and voice applications for your wireless
clients.
Short GI: Check this box to reduce the guard interval time therefore
increasing the data capacity. However, it’s less reliable and
may create higher data loss.
HT20/40 Select to Enable or Disable this feature.
Coexistence:
D-Link DIR-835 User Manual
65
Section 3 - Configuration
Advanced Wireless Settings
802.11n/g (2.4GHz)
Transmit Power: Set the transmit power of the antennas.
WLAN Partition: Enable this option to prevent associated
wireless clients from communicating with
each other.
WMM Function: WMM is QoS for your wireless network. This
will improve the quality of video and voice
applications for your wireless clients. Check
to enable this feature.
Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may create
higher data loss.
HT20/40 Select to Enable or Disable this feature.
Coexistence:
D-Link DIR-835 User Manual
66
Section 3 - Configuration
Advanced Wireless Settings
802.11n/a (5GHz)
Transmit Power: Set the transmit power of the antennas.
WLAN Partition: Enable this option to prevent associated
wireless clients from communicating with
each other.
WMM Function: WMM is QoS for your wireless network. This
will improve the quality of video and voice
applications for your wireless clients. Check
to enable this feature.
Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may create
higher data loss.
D-Link DIR-835 User Manual
67
Section 3 - Configuration
Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) System is a simplified method for securing your wireless network during the “Initial setup” as well
as the “Add New Device” processes. The Wi-Fi Alliance (WFA) has certified it across different products as well as manufactures.
The process is just as easy, as depressing a button for the Push-Button Method or correctly entering the 8-digit code for the
Pin-Code Method. The time reduction in setup and ease of use are quite beneficial, while the highest wireless Security setting
of WPA2 is automatically used.
Enable: Enable the Wi-Fi Protected Setup feature.
Lock Wireless Locking the wireless security settings prevents the
Security settings from being changed by the Wi-Fi Protected
Settings: Setup feature of the router. Devices can still be added
to the network using Wi-Fi Protected Setup. However,
the settings of the network will not change once this
option is checked.
PIN Settings: A PIN is a unique number that can be used to add
the router to an existing network or to create a new
network. The default PIN may be printed on the bottom
of the router. For extra security, a new PIN can be
generated. You can restore the default PIN at any time.
Only the Administrator (“admin” account) can change
or reset the PIN.
Current PIN: Shows the current value of the router’s PIN.
Reset PIN to Restore the default PIN of the router.
Default:
Generate New Create a random number that is a valid PIN. This
PIN: becomes the router’s PIN. You can then copy this PIN to
the user interface of the registrar.
D-Link DIR-835 User Manual
68
Section 3 - Configuration
Add Wireless This Wizard helps you add wireless devices to the wireless network.
Station:
The wizard will either display the wireless network settings to guide you through manual configuration, prompt you to enter the
PIN for the device, or ask you to press the configuration button on the device. If the device supports Wi-Fi Protected Setup and has a
configuration button, you can add it to the network by pressing the configuration button on the device and then the on the router
within 60 seconds. The status LED on the router will flash three times if the device has been successfully added to the network.
There are several ways to add a wireless device to your network. A “registrar” controls access to the wireless network. A registrar
only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on the
device. The router acts as a registrar for the network, although other devices may act as a registrar as well.
Add Wireless Start the wizard.
Device Wizard:
D-Link DIR-835 User Manual
69
Section 3 - Configuration
Advanced Network Settings
™
Enable UPnP: To use the Universal Plug and Play (UPnP ) feature
click on Enabled. UPNP provides compatibility with
networking equipment, software and peripherals.
WAN Ping: Unchecking the box will not allow the DIR-835 to
respond to pings. Blocking the Ping may provide some
extra security from hackers. Check the box to allow
the Internet port to be “pinged”.
WAN Ping Inbound Select from the drop-down menu if you would like
Filter: to apply the Inbound Filter to the WAN ping. Refer
to page 47 for more information regarding Inbound
Filter.
UPnP
Internet Ping Block
Internet Port Speed
Multicast Streams
WAN Port Speed: You may set the port speed of the Internet port to
10Mbps, 100Mbps, or auto. Some older cable or DSL
modems may require you to set the port speed to
10Mbps.
Multicast streams: Check the box to allow multicast traffic to pass
through the router from the Internet.
Enable IPV6 Check the box to allow IPv6 multicast traffic.
Multicast Streams:
D-Link DIR-835 User Manual
70
Section 3 - Configuration
Guest Zone
The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These
zones will be separate from your main wireless network. You may configure different zones for the 2.4GHz and 5.0GHz wireless
bands.
Enable Guest Check to enable the Guest Zone feature.
Zone:
Schedule: The schedule of time when the Guest Zone will be
active. The schedule may be set to Always, which will
allow the particular service to always be enabled. You
can create your own times in the Tools > Schedules
section.
Wireless Enter a wireless network name (SSID) that is different
Network Name: from your main wireless network.
Enable Routing Check to allow network connectivity between the
Between Zones: different zones created.
Security Mode: Select the type of security or encryption you would
like to enable for the guest zone.
D-Link DIR-835 User Manual
71
Section 3 - Configuration
IPv6 Firewall
The DIR-835’s IPv6 Firewall feature allows you to configure which kind of IPv6 traffic is allowed to pass through the device. The
DIR-835’s IPv6 Firewall functions in a similar way to the IP Filters feature.
Enable Checkbox: Check the box to enable the IPv6 firewall simple security.
Name: Enter a name to identify the IPv6 firewall rule.
Action: Use the radio buttons to Allow or Deny transport of the
IPv6 data packets according to the criteria defined in the
firewall rule.
Source: Use the Source drop-down menu to specify the interface
that connects to the source IPv6 addresses of the firewall
rule.
IP Address Range: Enter the source IPv6 address range in the adjacent IP
Address Range field.
Dest: Use the Dest drop-down menu to specify the interface that
connects to the destination IP addresses of the firewall rule.
Select Schedule: Use the drop-down menu to select the time schedule that
the IPv6 Firewall Rule will be enabled on. The schedule may
be set to Always, which will allow the particular service to
always be enabled. You can create your own times in the
Tools > Schedules section.
Protocol: Select the protocol of the firewall port (All, TCP, UDP, or ICMP).
Port Range: Enter the first port of the range that will be used for the firewall rule in the top port range field and enter the last port in the field
underneath.
Click the Save Settings button to save any changes made.
D-Link DIR-835 User Manual
72
Section 3 - Configuration
IPv6 Routing
This page allows you to specify custom routes that determine how data is moved around your network.
Route List: Check the box next to the route you wish to enable.
Name: Enter a specific name to identify this route.
Destination IP: Enter the host or network address you wish to reach.
Gateway IP: This is the IP address of the router used to reach the
specified destination.
D-Link DIR-835 User Manual
73
Section 3 - Configuration
Tools
Admin
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are
two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin
has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the
admin account has the ability to change both admin and user account passwords.
Admin Password: Enter a new password for the Administrator Login Name. The administrator
can make changes to the settings.
User Password: Enter the new password for the User login. If you login as the User, you
cannot change the settings (you can only view them).
Enter a name for the DIR-835 router.
Gateway Name: Enter a name for the router.
Enable Graphical Enables a challenge-response test to require users to type letters or
Authentication: numbers from a distorted image displayed on the screen to prevent online
hackers and unauthorized users from gaining access to your router’s
network settings.
Enable HTTPS Check to enable HTTPS to connect to the router securely.
Server:
Enable Remote Remote management allows the DIR-835 to be configured from the
Management: Internet by a web browser. A username and password is still required to
access the Web-Management interface. In general, only a member of your
network can browse the built-in web pages to perform Administrator
tasks. This feature enables you to perform Administrator tasks from the
remote (Internet) host. The port number used to access the DIR-835.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of
the DIR-835 and 8080 is the port used for the Web Management interface.
Remote Admin If you have enabled HTTPS Server and checked Use HTTPS, you must
Inbound Filter: enter https:// as part of the URL to access the router remotely.
Details: This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to
remove the rule.
D-Link DIR-835 User Manual
74
Section 3 - Configuration
Time
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock.
From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to
automatically adjust the time when needed.
Time Zone: Select the Time Zone from the drop-down
menu.
Daylight To select Daylight Saving time manually, select
Saving: enabled or disabled, and enter a start date and
an end date for daylight saving time.
Enable NTP NTP is short for Network Time Protocol. NTP
Server: synchronizes computer clock times in a network
of computers. Check this box to use a NTP server.
This will only connect to a server on the Internet,
not a local server.
NTP Server Enter the NTP server or select one from the dropUsed: down menu.
Manual: To manually input the time, enter the values
in these fields for the Year, Month, Day, Hour,
Minute, and Second and then click Set Time.
You can also click Copy Your Computer’s Time
Settings.
D-Link DIR-835 User Manual
75
Section 3 - Configuration
SysLog
The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs to a
SysLog server on your network.
Enable Logging to Check this box to send the router logs to a SysLog
SysLog Server: Server.
SysLog Server IP The address of the SysLog server that will be
Address: used to send the logs. You may also select your
computer from the drop-down menu (only
if receiving an IP address from the router via
DHCP).
D-Link DIR-835 User Manual
76
Section 3 - Configuration
Email Settings
The Email feature can be used to send the system log files, router alert messages, and firmware update notification to your
email address.
Enable Email When this option is enabled, router activity logs
Notification: are emailed to a designated email address.
From Email This email address will appear as the sender
Address: when you receive a log file or firmware upgrade
notification via email.
To Email Address: Enter the email address where you want the email
sent.
SMTP Server Enter the SMTP server address for sending email.
Address: If your SMTP server requires authentication, select
this option.
Enable Check this box if your SMTP server requires
Authentication: authentication.
Account Name: Enter your account for sending email.
Password: Enter the password associated with the account.
Re-type the password associated with the account.
On Log Full: When this option is selected, logs will be sent via
email to your account when the log is full.
On Schedule: Selecting this option will send the logs via email
according to schedule.
Schedule: This option is enabled when On Schedule is selected. You can select a schedule from the list of defined schedules. To create a
schedule, go to Tools > Schedules.
D-Link DIR-835 User Manual
77
Section 3 - Configuration
System
This section allows you to manage the router’s configuration settings, reboot the router, and restore the router to the factory
default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve
created.
Save Settings Use this option to save the current router
to Local Hard configuration settings to a file on the hard disk of
Drive: the computer you are using. First, click the Save
button. A file dialog will appear, allowing you to
select a location and file name for the settings.
Load Settings Use this option to load previously saved
from Local router configuration settings. First, use the
Hard Drive: Browse option to find a previously saved file
of configuration settings. Then, click the Load
button to transfer those settings to the router.
Restore
to Factory
Default
Settings:
This option will restore all configuration settings
back to the settings that were in effect at the time
the router was shipped from the factory. Any
settings that have not been saved will be lost,
including any rules that you have created. If you
want to save the current router configuration
settings, use the Save button above.
Reboot Click to reboot the router.
Device:
D-Link DIR-835 User Manual
78
Section 3 - Configuration
Firmware
You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard drive of
the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support website
for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from this site.
Browse: After you have downloaded the new firmware, click
Browse to locate the firmware update on your hard
drive. Click Upload to complete the firmware upgrade.
Upload: Once you have a firmware update on your computer,
use this option to browse for the file and then upload
the information into the access point.
Language Pack
You can change the language of the web UI by uploading
available language packs.
Browse: After you have downloaded the new language pack,
click Browse to locate the language pack file on your
hard drive. Click Upload to complete the language
pack upgrade.
D-Link DIR-835 User Manual
79
Section 3 - Configuration
Dynamic DNS
The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have purchased
(www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign
dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in your domain name to connect to
your server no matter what your IP address is.
Enable Dynamic Domain Name System is a method of
Dynamic DNS: keeping a domain name linked to a changing IP
Address. Check the box to enable DDNS.
Server Choose your DDNS provider from the drop down
Address: menu.
Host Name: Enter the Host Name that you registered with
your DDNS service provider.
Username or Enter the Username for your DDNS account.
Key:
Password or Enter the Password for your DDNS account.
Key:
Timeout: Enter a time (in hours).
Status: Displays the current connection status.
DDNS for IPv6 Hosts
Enable: Check the box to enable DDNS for IPv6 Hosts.
IPv6 Enter the IPv6 address of your computer/server
Address: in your local network. You can click the << button
and select a computer/server from the drop-down
list.
D-Link DIR-835 User Manual
80
Section 3 - Configuration
Host Name: Enter the IPv6 Host Name that you registered with your DDNS service provider.
IPv6 DDNS Once you save your entry, the IPv6 DDNS host information will be displayed here.
List:
Enable: Check to enable the entry.
Host Name: Displays the name of your IPv6 DDNS host.
IPv6 Address: Displays the IPv6 address of your computer/server associated with the IPv6 DDNS host.
Edit/Delete: Click the edit icon to make changes to the entry or click the delete icon to remove the entry.
D-Link DIR-835 User Manual
81
Section 3 - Configuration
System Check
Ping Test: The Ping Test is used to send Ping packets to test if a
computer is on the Internet. Enter the IP Address that you
wish to Ping, and click Ping.
Ping Results: The results of your ping attempts will be displayed here.
D-Link DIR-835 User Manual
82
Section 3 - Configuration
Schedules
Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to
8pm, you could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm.
Name: Enter a name for your new schedule.
Days: Select a day, a range of days, or All Week to include
every day.
Time: Check All Day - 24hrs or enter a start and end
time for your schedule.
Save: You must click Save Settings at the top for your
schedules to go into effect.
Schedule Rules The list of schedules will be listed here. Click the
List: Edit icon to make changes or click the Delete icon
to remove the schedule.
D-Link DIR-835 User Manual
83
Section 3 - Configuration
Status
Device Info
This page displays the current information for the DIR-835. It will display the LAN, WAN (Internet), and Wireless information. If
your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use
Release to disconnect from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect
button will be displayed. Use Disconnect to drop the PPPoE connection and use
Connect to establish the PPPoE connection.
General: Displays the router’s time and firmware version.
WAN: Displays the MAC address and the public IP settings
LAN: Displays the MAC address and the private (local) IP settings for the router.
Wireless LAN: Displays the wireless MAC address and your wireless settings such as SSID and
Channel.
LAN Computers: Displays computers and devices that are connected to the router via Ethernet
and that are receiving an IP address assigned by the router (DHCP).
D-Link DIR-835 User Manual
84
Section 3 - Configuration
Logs
The router automatically logs (records) events of possible interest in it’s internal memory. If there isn’t enough internal memory
for all events, logs of older events are deleted but logs of the latest events are retained. The Logs option allows you to view
the router logs. You can define what types of events you want to view and the level of the events to view. This router also has
external Syslog Server support so you can send the log files to a computer on your network that is running a Syslog utility.
Log Options: You can select the types of messages that you want
to display from the log. System Activity, Debug
Information, Attacks, Dropped Packets, and Notice
messages can be selected. Click Apply Log Settings
Now to activate your settings.
Refresh: Updates the log details on the screen so it displays any
recent activity.
Clear: Clears all of the log contents.
Email Now: This option will send a copy of the router log to your
email address configured in the Tools > Email Settings
screen.
Save Log: This option will save the router log to a file on your
computer.
D-Link DIR-835 User Manual
85
Section 3 - Configuration
Statistics
The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-835 on both
the WAN, LAN ports and both the 802.11n/g (2.4GHz) and 802.11n/a (5GHz) wireless bands. The traffic counter will reset if the
device is rebooted.
D-Link DIR-835 User Manual
86
Section 3 - Configuration
Internet Sessions
The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation
between a program or application on a LAN-side computer and a program or application on a WAN-side computer.
D-Link DIR-835 User Manual
87
Section 3 - Configuration
Routing
The Routing option is an advanced method of customizing specific routes of data through your network.
Interface: Use the drop-down menu to specify if the IP packet must
use the WAN or LAN interface to transit out of the Router.
Destination IP: Enter the IP address of the packets that will take this route.
Subnet Mask: Enter the subnet mask to specify the subnet of the IP
packets that will take this route.
Gateway: Enter the next hop that will be taken if this route is used.
Click the Save Settings button to save any changes made.
D-Link DIR-835 User Manual
88
Section 3 - Configuration
Wireless
The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and
MAC address of the connected wireless clients.
D-Link DIR-835 User Manual
89
Section 3 - Configuration
IPv6
The IPv6 page displays a summary of the Router’s IPv6 settings and lists the IPv6 address and host name of any IPv6 clients.
D-Link DIR-835 User Manual
90
Section 3 - Configuration
IPV6 Routing
This page displays the IPV6 routing details configured for your router.
D-Link DIR-835 User Manual
91
Section 3 - Configuration
Support
D-Link DIR-835 User Manual
92
Section 4 - Security
Wireless Security
This section will show you the different levels of security you can use to protect your data from intruders. The
DIR-835 offers the following types of security:
• WPA2 (Wi-Fi Protected Access 2)
• WPA (Wi-Fi Protected Access)
• WPA2-PSK (Pre-Shared Key)
• WPA-PSK (Pre-Shared Key)
What is WPA?
WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent
Privacy).
The 2 major improvements over WEP:
• Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a
hashing algorithm and, by adding an integrity-checking feature, ensures that the keys haven’t been tampered
with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP.
• User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP).
WEP regulates access to a wireless network based on a computer’s hardware-specific MAC address, which is
relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to
ensure that only authorized network users can access the network.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password
between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key
entered on your wireless router or access point.
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more
secure public key encryption system to ensure that only authorized network users can access the network.
D-Link DIR-835 User Manual
93
Section 4 - Security
Wireless Security Setup Wizard
To run the security wizard, click on Setup at the top and then click
Wireless Network Setup Wizard.
Check the Manually set 5GHz band Network Name... box to manually
set your desired wireless network name for the 5GHz band.
Type your desired wireless network name (SSID).
Automatically: Select this option to automatically generate
the router’s network key and click Next.
Manually: Select this option to manually enter your network
key and click Next.
D-Link DIR-835 User Manual
94
Section 4 - Security
If you selected Automatically, the summary window will display
your settings. Write down the security key and enter this on your
wireless clients. Click Save to save your settings.
If you selected Manually, the following screen will appear.
D-Link DIR-835 User Manual
95
Section 4 - Security
Add Wireless Device with WPS Wizard
From the Setup > Wireless Settings screen, click Add Wireless
Device with WPS.
Select Auto to add a wireless client using WPS (Wi-Fi Protected
Setup). Once you select Auto and click Connect, you will have a
120 second time limit to apply the settings to your wireless client(s)
and successfully establish a connection.
If you select Manual, a settings summary screen will appear. Write
down the security key and enter this on your wireless clients.
PIN: Select this option to use PIN method. In order to use this
method you must know the wireless client’s 8 digit PIN and click
Connect.
PBC: Select this option to use PBC (Push Button) method to add a
wireless client. Click Connect.
D-Link DIR-835 User Manual
96
Section 4 - Security
Configure WPA-Personal (PSK)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser and
entering the IP address of the router (192.168.0.1). Click on Setup and
then click Wireless Settings on the left side.
2. Next to Security Mode, select WPA-Personal.
3. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use Auto
if you have wireless clients using both WPA and WPA2.
4. Next to Cypher Type, select TKIP and AES, TKIP, or AES.
5. Next to Group Key Update Interval, enter the amount of time before
the group key used for broadcast and multicast data is changed (3600
is default).
6. Next to Pre-Shared Key, enter a key (passphrase). The key is entered as
a pass-phrase in ASCII format at both ends of the wireless connection.
The pass-phrase must be between 8-63 characters.
7. Click Save Settings to save your settings. If you are configuring the
router with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same
passphrase as you did on the router.
D-Link DIR-835 User Manual
97
Section 4 - Security
Configure WPA-Enterprise (RADIUS)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser
and entering the IP address of the router (192.168.0.1). Click on
Setup and then click Wireless Settings on the left side.
2. Next to Security Mode, select WPA-Enterprise.
3. Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use Auto
if you have wireless clients using both WPA and WPA2.
4. Next to Cypher Type, select TKIP and AES, TKIP, or AES.
5. Next to Group Key Update Interval, enter the amount of time before
the group key used for broadcast and multicast data is changed
(3600 is default).
6. Next to Authentication Timeout, enter the amount of time before a
client is required to re-authenticate (60 minutes is default).
7. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server.
D-Link DIR-835 User Manual
98
Section 4 - Security
8. Next to RADIUS Server Port, enter the port you are using with
your RADIUS server. 1812 is the default port.
9. Next to RADIUS Server Shared Secret, enter the security key.
10. If the MAC Address Authentication box is selected then the user
will need to connect from the same computer whenever logging
into the wireless network.
11. Click Advanced to enter settings for a secondary RADIUS
Server.
12. Click Apply Settings to save your settings.
D-Link DIR-835 User Manual
99
Section 4 - Security
Connect to a Wireless Network
Using Windows® 7
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
Wireless Icon
2. The utility will display any available wireless networks in your area.
D-Link DIR-835 User Manual
100
Section 4 - Security
3. Highlight the wireless network (SSID) you would like to connect to
and click the Connect button.
If you get a good signal but cannot access the Internet, check your
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
4. The following window appears while your computer tries to
connect to the router.
D-Link DIR-835 User Manual
101
Section 4 - Security
5. Enter the same security key or passphrase that is on your router
and click Connect. You can also connect by pushing the WPS
button on the router.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct.
The key or passphrase must be exactly the same as on the wireless
router.
D-Link DIR-835 User Manual
102
Section 4 - Security
Configure WPS
The WPS feature of the DIR-835 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to
configure the WPS feature:
1. Click the Start button and select Computer from the Start
menu.
2. Click the Network option.
D-Link DIR-835 User Manual
103
Section 4 - Security
3. Double-click the DIR-835.
4. Input the WPS PIN number (displayed in the WPS window on the
Router’s LCD screen or in the Setup > Wireless Setup menu in
the Router’s Web UI) and click Next.
D-Link DIR-835 User Manual
104
Section 4 - Security
5. Type a name to identify the network.
6. To configure advanced settings, click the
icon.
Click Next to continue.
D-Link DIR-835 User Manual
105
Section 4 - Security
7. The following window appears while the Router is being
configured.
Wait for the configuration to complete.
8. The following window informs you that WPS on the router has
been setup successfully.
Make a note of the security key as you may need to provide this
security key if adding an older wireless device to the network in
the future.
9. Click Close to complete WPS setup.
D-Link DIR-835 User Manual
106
Section 5 - Connecting to a Wireless Network
Windows Vista®
Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility or Windows® 2000, please
refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site
survey” option similar to the Windows Vista® utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lowerright corner next to the time). Select Connect to a network.
The utility will display any available wireless networks in your area.
Click on a network (displayed using the SSID) and click the Connect
button.
If you get a good signal but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
D-Link DIR-835 User Manual
107
Section 5 - Connecting to a Wireless Network
Configure Wireless Security
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Open the Windows Vista® Wireless Utility by right-clicking on the
wireless computer icon in your system tray (lower right corner of
screen). Select Connect to a network.
2. Highlight the wireless network (SSID) you would like to connect
to and click Connect.
D-Link DIR-835 User Manual
108
Section 5 - Connecting to a Wireless Network
3. Enter the same security key or passphrase that is on your router and
click Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct. The
key or passphrase must be exactly the same as on the wireless router.
D-Link DIR-835 User Manual
109
Section 5 - Connecting to a Wireless Network
Connect Using WCN 2.0 in Windows Vista®
The router supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista®. The following instructions for setting this up
depends on whether you are using Windows Vista® to configure the router or third party software.
When you first set up the router, Wi-Fi protection is disabled and unconfigured. To enjoy the benefits of Wi-Fi protection, the
router must be both enabled and configured. There are three basic methods to accomplish this: use Windows Vista’s built-in
support for WCN 2.0, use software provided by a third party, or manually configure.
If you are running Windows Vista®, log into the router and click the Enable checkbox in the Basic > Wireless section. Use the
Current PIN that is displayed on the Advanced > Wi-Fi Protected Setup section or choose to click the Generate New PIN
button or Reset PIN to Default button.
For additional information, please refer to page 85.
If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed
to the next section to set up the newly-configured router.
D-Link DIR-835 User Manual
110
Section 5 - Connecting to a Wireless Network
Windows® XP
Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service
Pack 2 users. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless
adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows®
XP utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lowerright corner next to the time). Select View Available Wireless
Networks.
The utility will display any available wireless networks in your area.
Click on a network (displayed using the SSID) and click the Connect
button.
If you get a good signal but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
D-Link DIR-835 User Manual
111
Section 5 - Connecting to a Wireless Network
Configure WPA-PSK
It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are
joining an existing network, you will need to know the WPA key being used.
1. Open the Windows® XP Wireless Utility by right-clicking
on the wireless computer icon in your system tray
(lower-right corner of screen). Select View Available Wireless
Networks.
2. Highlight the wireless network (SSID) you would like to
connect to and click Connect.
D-Link DIR-835 User Manual
112
Section 5 - Connecting to a Wireless Network
3. The Wireless Network Connection box will appear. Enter the WPA-PSK
passphrase and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the WPA-PSK settings are correct. The
WPA-PSK passphrase must be exactly the same as on the wireless router.
D-Link DIR-835 User Manual
113
Section 6 - Troubleshooting
Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of the DIR-835. Read the
following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a different
operating system, the screenshots on your computer will look similar to the following examples.
1. Why can’t I access the web-based configuration utility?
When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website nor do you
have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must
be on the same IP subnet to connect to the web-based utility.
• Make sure you have an updated Java-enabled web browser. We recommend the following:
- Microsoft Internet Explorer® 6.0 and higher
- Mozilla Firefox 3.0 and higher
- Google™ Chrome 2.0 and higher
- Apple Safari 3.0 and higher
• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a
different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be
on.
• Disable any Internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice, Sygate,
Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included
with your firewall software for more information on disabling or configuring it.
D-Link DIR-835 User Manual
114
Section 6 - Troubleshooting
• Configure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click
the button to restore the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button.
Make sure nothing is checked. Click OK.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
• Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This
should open the login page for your web management.
• If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30
seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the
factory defaults.
To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip
to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30
seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the
password box empty.
D-Link DIR-835 User Manual
115
Section 6 - Troubleshooting
3. Why can’t I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail,
we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc).
Note: AOL DSL+ users must use MTU of 1400.
To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be
another computer, or a URL.
• Click on Start and then click Run.
• Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and
press Enter (or click OK).
• Once the window opens, you’ll need to do a special ping. Use the following syntax:
ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472
D-Link DIR-835 User Manual
116
Section 6 - Troubleshooting
You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a
fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say
that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with
(1452+28=1480).
Once you find your MTU, you can now configure your router with the proper MTU size.
To change the MTU rate on your router follow the steps below:
• Open your browser, enter the IP address of your router (192.168.0.1) and click OK.
• Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page
for the device.
• Click on Setup and then click Manual Configure.
• To change the MTU enter the number in the MTU field and click Save Settings to save your settings.
• Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments
of ten.
D-Link DIR-835 User Manual
117
Appendix A - Wireless Basics
Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless
connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link
wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able
to enjoy the freedom that wireless networking delivers.
A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of
wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops
and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently.
Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users.
Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop
systems support the same protocols as Ethernet adapter cards.
Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to
use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide
this link.
D-Link DIR-835 User Manual
118
Appendix A - Wireless Basics
What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio
frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network.
Why D-Link Wireless?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link
delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
How does wireless work?
Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But
wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area
to be able to connect your computer. There are two different types of wireless networks Wireless Local Area Network (WLAN),
and Wireless Personal Area Network (WPAN).
Wireless Local Area Network (WLAN)
In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has
a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point
as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles
to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and
many other outdoor venues.
D-Link DIR-835 User Manual
119
Appendix A - Wireless Basics
Wireless Personal Area Network (WPAN)
Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to
30 feet away.
Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as
much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other
devices that operate on batteries.
Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business,
D-Link has a wireless solution for it.
Home
• Gives everyone at home broadband access
• Surf the web, check email, instant message, etc.
• Gets rid of the cables around the house
• Simple and easy to use
Small Office and Home Office
• Stay on top of everything at home as you would at office
• Remotely access your office network from home
• Share Internet connection and printer with multiple computers
• No need to dedicate office space
D-Link DIR-835 User Manual
120
Appendix A - Wireless Basics
Where is wireless used?
Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s becoming
so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public
places is usually called “hotspots”.
Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations
like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.
Wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing where to start.
That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.
Tips
Here are a few things to keep in mind, when you install a wireless network.
Centralize your router or Access Point
Make sure you place the router/access point in a centralized location within your network for the best performance. Try to
place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have
a two-story home, you may need a repeater to boost the signal to extend the range.
Eliminate Interference
Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/
access point. This would significantly reduce any interference that the appliances might cause since they operate on same
frequency.
D-Link DIR-835 User Manual
121
Appendix A - Wireless Basics
Security
Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on
the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up.
Wireless Modes
There are basically two modes of networking:
• Infrastructure – All wireless clients will connect to an access point or wireless router.
• Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network
adapters on each computer, such as two or more DIR-835 wireless network Cardbus adapters.
An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the
wireless router or access point.
An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc
mode to communicate.
D-Link DIR-835 User Manual
122
Appendix B - Networking Basics
Networking Basics
Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP
server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK. (Windows 7/Vista® users type cmd in the Start Search box.)
At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and the
default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation,
security settings, and the settings on your router.
Some firewall software programs may block a DHCP
request on newly installed adapters.
D-Link DIR-835 User Manual
123
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows® 7 Windows Vista®
Windows® XP Windows® 2000 -
Click on Start > Control Panel > Network and Internet > Network and Sharing Center.
Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network
Connections.
Click on Start > Control Panel > Network Connections.
From the desktop, right-click My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet
as your network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X
where X is a number between 2 and 99. Make sure that the number you choose is not
in use on the network. Set the Default Gateway the same as the LAN IP address of your
router (I.E. 192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DIR-835 User Manual
124
Appendix C - Technical Specifications
Technical Specifications
Standards
• IEEE 802.11n
• IEEE 802.11g
• IEEE 802.11a
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
Security
• WPA™ - Personal/Enterprise
• WPA2™ - Personal/Enterprise
Wireless Signal Rates1
IEEE 802.11n 2.4GHz(HT20/40):
• 144.4Mbps (300)
· 130Mbps (270)
• 115.6Mbps (240)
· 86.7Mbps (180)
• 72.2Mbps (150)
· 65Mbps (135)
• 57.8Mbps (120)
· 43.3Mbps (90)
• 28.9Mbps (60)
· 21.7Mbps (45)
•14.4Mbps (30)
· 7.2Mbps (15)
IEEE 802.11n 5GHz(HT20/40):
• 216Mbps (450)
• 195Mbps (405)
•173.3Mbps (360)
•144.4Mbps (300)
• 130.7Mbps (270)
• 130Mbps (270)
•115.6Mbps (240)
• 86.7Mbps (180)
•72.2Mbps (150)
• 65Mbps (135)
•57.8Mbps (120)
• 43.3Mbps (90)
•28.9Mbps (60)
• 21.7Mbps (45)
•14.4Mbps (30)
• 7.2Mbps (15)
IEEE 802.11g:
• 54Mbps
• 48Mbps
• 24Mbps
• 18Mbps
• 11Mbps
• 9Mbps
• 5.5Mbps
• 2Mbps
• 36Mbps
• 12Mbps
• 6Mbps
• 1Mbps
Frequency Range2 (North America)
• 2.412GHz to 2.462GHz (802.11g/n)
• 5.15GHz to 5.825GHz (802.11a/n)3
External Antenna Type
• Three (3) detachable Antennas
Operating Temperature
• 32°F to 131°F ( 0°C to 40°C)
Humidity
• 95% maximum (non-condensing)
Safety & Emissions
• FCC
• IC
Dimensions
• L = 7.6 inches
• W = 4.6 inches
• H = 1.2inches
Warranty
• 1 Year
1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including
volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.
2 Frequency Range varies depending on country’s regulation
3 The DIR-835 does not include 5.25-5.35GHz & 5.47-5.725GHz in some regions.
D-Link DIR-835 User Manual
125
Appendix D - Contacting Technical Support
Contacting Technical Support
U.S. and Canadian customers can contact D-Link technical support through our web site or by phone.
Before you contact technical support, please have the following ready:
• Model number of the product (e.g. DIR-835)
• Hardware Revision (located on the label on the bottom of the router (e.g. rev A1))
• Serial Number (s/n number located on the label on the bottom of the router).
You can find software updates and user documentation on the D-Link website as well as frequently asked questions and
answers to technical issues.
For customers within the United States:
For customers within Canada:
Phone Support:
(877) 453-5465
Phone Support:
(800) 361-5265
Internet Support:
http://support.dlink.com
Internet Support:
http://support.dlink.ca
D-Link DIR-835 User Manual
126
Appendix E - Warranty
Warranty
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty:
• Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and
• Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions
or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
Limited Warranty:
D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects in workmanship
and materials under normal use from the date of original retail purchase of the product, for the period set forth below (“Warranty Period”), except
as otherwise stated herein.
• Hardware (excluding power supplies and fans): One (1) year
• Power supplies and fans: One (1) year
• Spare parts and spare kits: Ninety (90) days
The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at
D-Link’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual
purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware
need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any
reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety (90) days, whichever is longer,
and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if D-Link determines that it is not practical
to repair or replace the defective Hardware, the actual price paid by the original purchaser for the defective Hardware will be refunded by D-Link
upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded,
shall become the property of D-Link upon replacement or refund.
D-Link DIR-835 User Manual
127
Appendix E - Warranty
Limited Software Warranty:
D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional specifications
for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90)
days (“Software Warranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated in its
documentation. D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will be
free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will
be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s functional
specifications for the Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise
agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the
license granted by D-Link for the Software. Replacement Software will be warranted for the remainder of the original Warranty Period and is subject
to the same limitations and exclusions. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it
is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by
D-Link; provided that the non-conforming Software (and all copies thereof ) is first returned to D-Link. The license granted respecting any Software
for which a refund is given automatically terminates.
Non-Applicability of Warranty:
The Limited Warranty provided hereunder for Hardware and Software portions of D-Link’s products will not be applied to and does not cover any
refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or
the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold “As-Is” without
any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the
contrary.
Submitting A Claim (USA):
The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and
the product is within warranty, the customer shall submit a claim to D-Link as outlined below:
• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software
nonconformance in sufficient detail to allow DLink to confirm the same, along with proof of purchase of the product (such as a
copy of the dated purchase invoice for the product) if the product is not registered.
• The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the
customer in resolving any suspected defects with the product. If the product is considered defective, the customer must obtain
a Return Material Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID Number at
https://rma.dlink.com/.
D-Link DIR-835 User Manual
128
Appendix E - Warranty
• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package
to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package.
Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product
and will not ship back any accessories.
• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD
will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped
to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that
are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common
carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise
we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are
prepaid by the customer. D-Link may reject or return any product that is not packaged and shipped in strict compliance with the
foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to
pay D-Link’s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance
with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming.
Submitting A Claim (Canada):
The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and
the product is within warranty, the customer shall submit a claim to D-Link as outlined below:
• Customers need to provide their receipt (proof of purchase) even if the product is registered. Without a receipt, no warranty service will
be done. The registration is not considered a proof of purchase.
• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance
in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase
invoice for the product) if the product is not registered.
• The customer must obtain a Case ID Number from D-Link Technical Support at 1-800-361-5265, who will attempt to assist the customer
in resolving any suspected defects with the product. If the product is considered defective, the customer must obtain a Return Material
Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID Number at https://rma.dlink.ca/.
• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to
ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not
include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship
back any accessories.
D-Link DIR-835 User Manual
129
Appendix E - Warranty
• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will
be rejected by D-Link. Products shall be fully insured by the customer and shipped to D-Link Networks, Inc., 2525 Meadowvale Boulevard
Mississauga, Ontario, L5N 5S2 Canada. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired
or replaced packages will be shipped to the customer via Purolator Canada or any common carrier selected by D-Link. Return shipping
charges shall be prepaid by D-Link if you use an address in Canada, otherwise we will ship the product to you freight collect. Expedited
shipping is available upon request and provided shipping charges are prepaid by the customer. D-Link may reject or return any product
that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from
the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product
that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or
non-conforming.
• RMA phone number: 1-800-361-5265 Hours of Operation: Monday-Friday, 9:00AM – 9:00PM EST
What Is Not Covered:
The Limited Warranty provided herein by D-Link does not cover:
Products that, in D-Link’s judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation,
lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number
has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs;
Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act
of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone
other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers,
or the liquidators expressly disclaim their warranty obligation pertaining to the product.
While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D-Link
Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.
Disclaimer of Other Warranties:
EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER
INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY
SHALL BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE
LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE
PURCHASER OF THE PRODUCT.
D-Link DIR-835 User Manual
130
Appendix E - Warranty
Limitation of Liability:
TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL
OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK
STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT
IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK
FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF
THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF
THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT. THE MAXIMUM
LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING
EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED
OR STATUTORY.
Governing Law:
This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This
Limited Warranty provides specific legal rights and you may also have other rights which vary from state to state.
Trademarks:
D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their
respective owners.
Copyright Statement:
No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the
United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.
Copyright ©2011 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.
CE Mark Warning:
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take
adequate measures.
D-Link DIR-835 User Manual
131
Appendix E - Warranty
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
IMPORTANT NOTICE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 22cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory
to match the intended destination. The firmware setting is not accessible by the end user.
D-Link DIR-835 User Manual
132
Appendix E - Warranty
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 22cm between the radiator & your body.
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile
satellite systems;
(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could
cause interference and/or damage to LE-LAN devices.
This device has been designed to operate with an antenna having a maximum gain of [2] dB. Antenna having a higher gain is strictly prohibited
per regulations of Industry Canada. The required antenna impedance is 50 ohms.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for
the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter (IC: 4216A-IR835A1/ Model: DIR-835A1) has been approved by Industry Canada to operate with the antenna types listed
below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this
list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet
aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu,
y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
D-Link DIR-835 User Manual
133
Appendix E - Warranty
NOTE IMPORTANTE:
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit
être installé et utilisé avec un minimum de 22cm de distance entre la source de rayonnement et votre corps.
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques
de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d.,
qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages
aux dispositifs LAN-EL.
Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximal de dB [3x]. Une antenne à gain plus élevé est strictement
interdite par les règlements d’Industrie Canada. L’impédance d’antenne requise est de 50 ohms.
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peutfonctionner avec une antenne d’un type et d’un gain maximal
(ou inférieur) approuvé pourl’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectriqueà l’intention des autres
utilisateurs, il faut choisir le type d’antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité
nécessaire àl’établissement d’une communication satisfaisante.
Le présent émetteur radio (IC: 4216A-IR835A1 / Modèle: DIR-835A1) a été approuvé par Industrie Canada pour fonctionner avec les types d’antenne
énumérés ci-dessous et ayant un gain admissible maximal et l’impédance requise pour chaque type d’antenne. Les types d’antenne non inclus dans
cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur.
Antenna information: dipole / 2dBi (Brand: D-Link / Manufacturer: Wha Yu)
D-Link DIR-835 User Manual
134
Appendix F - Registration
Registration
Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
Version 1.0
October 12, 2011
D-Link DIR-835 User Manual
135

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Create Date                     : 2011:10:14 16:22:12+08:00
Metadata Date                   : 2011:10:27 16:10:33+08:00
Modify Date                     : 2011:10:27 16:10:33+08:00
Creator Tool                    : Adobe InDesign CS4 (6.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 7597 bytes, use -b option to extract)
Instance ID                     : uuid:a3f2b133-9bc0-4fe4-8815-b7d51120e255
Document ID                     : xmp.did:5025D369F0F5E01187259CA9CC719F8A
Original Document ID            : adobe:docid:indd:5e8875e4-12a0-11df-9c31-b8a2ca951b65
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:4F25D369F0F5E01187259CA9CC719F8A
Derived From Document ID        : xmp.did:CC0CF9B30AE6E011849AEAA40185C3FD
Derived From Original Document ID: adobe:docid:indd:5e8875e4-12a0-11df-9c31-b8a2ca951b65
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:DF6F95E1105EDF118B19AF795776AE11, xmp.iid:E06F95E1105EDF118B19AF795776AE11, xmp.iid:E16F95E1105EDF118B19AF795776AE11, xmp.iid:E26F95E1105EDF118B19AF795776AE11, xmp.iid:E36F95E1105EDF118B19AF795776AE11, xmp.iid:D1CE43401D5EDF11A17BD412871847BA, xmp.iid:CE13CA1BBE6DDF11BE74F04D776BC22C, xmp.iid:CF13CA1BBE6DDF11BE74F04D776BC22C, xmp.iid:D013CA1BBE6DDF11BE74F04D776BC22C, xmp.iid:D113CA1BBE6DDF11BE74F04D776BC22C, xmp.iid:D213CA1BBE6DDF11BE74F04D776BC22C, xmp.iid:D313CA1BBE6DDF11BE74F04D776BC22C, xmp.iid:D413CA1BBE6DDF11BE74F04D776BC22C, xmp.iid:03647A0CCE6DDF11BE74F04D776BC22C, xmp.iid:04647A0CCE6DDF11BE74F04D776BC22C, xmp.iid:05647A0CCE6DDF11BE74F04D776BC22C, xmp.iid:06647A0CCE6DDF11BE74F04D776BC22C, xmp.iid:482CFE59F273DF11B74A862F0F1FFF2A, xmp.iid:492CFE59F273DF11B74A862F0F1FFF2A, xmp.iid:6958F39B0874DF11BBF3AE7F3D0A9A86, xmp.iid:6A58F39B0874DF11BBF3AE7F3D0A9A86, xmp.iid:6B58F39B0874DF11BBF3AE7F3D0A9A86, xmp.iid:9A5291223FE1DF118AF6C3695856DBBF, xmp.iid:833057DA5BE1DF118AF6C3695856DBBF, xmp.iid:843057DA5BE1DF118AF6C3695856DBBF, xmp.iid:853057DA5BE1DF118AF6C3695856DBBF, xmp.iid:48A9263789B4E011BBF5F8455D63476D, xmp.iid:49A9263789B4E011BBF5F8455D63476D, xmp.iid:4AA9263789B4E011BBF5F8455D63476D, xmp.iid:4DA9263789B4E011BBF5F8455D63476D, xmp.iid:2DBBCC1A18B7E01180E9820FE4D58C5C, xmp.iid:FE6B8A4CABB7E011AF419B1A5341E7F1, xmp.iid:66DD2361DFBEE011BB0DE85F13D1C0B5, xmp.iid:F845CEF079BFE011AFC8AADC664D2646, xmp.iid:95F3AFAA00C2E011BE64BFD8E673BB7B, xmp.iid:3F62CDD7B4C2E0119AE6A4EC0C7C23A4, xmp.iid:6A271D2083C3E011BEDFB3C50B638D30, xmp.iid:6B271D2083C3E011BEDFB3C50B638D30, xmp.iid:6C271D2083C3E011BEDFB3C50B638D30, xmp.iid:E7D8FB613FC4E01184DEC45FD03BFADA, xmp.iid:E8D8FB613FC4E01184DEC45FD03BFADA, xmp.iid:E9D8FB613FC4E01184DEC45FD03BFADA, xmp.iid:EAD8FB613FC4E01184DEC45FD03BFADA, xmp.iid:EBD8FB613FC4E01184DEC45FD03BFADA, xmp.iid:ECD8FB613FC4E01184DEC45FD03BFADA, xmp.iid:EDD8FB613FC4E01184DEC45FD03BFADA, xmp.iid:EED8FB613FC4E01184DEC45FD03BFADA, xmp.iid:85239F7F0EC5E011992FF1E6F0DE9ED2, xmp.iid:86239F7F0EC5E011992FF1E6F0DE9ED2, xmp.iid:FCDF85D58EC7E0118927C14F9B634E9C, xmp.iid:D94DE32240C8E011B15895AFFBD58405, xmp.iid:DA4DE32240C8E011B15895AFFBD58405, xmp.iid:DB4DE32240C8E011B15895AFFBD58405, xmp.iid:EDBF80CDB8CAE0119D21C9AE0D6DB351, xmp.iid:6FC7E2ACFBCCE0118EFFE56E035EEA95, xmp.iid:70C7E2ACFBCCE0118EFFE56E035EEA95, xmp.iid:B801A2F81BCDE0118EFFE56E035EEA95, xmp.iid:C459EDFDB4CDE01182F6B59CA781FF44, xmp.iid:C559EDFDB4CDE01182F6B59CA781FF44, xmp.iid:9AD089F969DEE011A9F2E5774E1F4F07, xmp.iid:9BD089F969DEE011A9F2E5774E1F4F07, xmp.iid:A9C3A2FF1DDFE011B193E877ECEBEF7C, xmp.iid:E1236C43E3DFE011AC30F18C60CE536A, xmp.iid:021E20AEFDDFE011AC30F18C60CE536A, xmp.iid:031E20AEFDDFE011AC30F18C60CE536A, xmp.iid:2BD4D85D88E0E011931C9525593E29CD, xmp.iid:2CD4D85D88E0E011931C9525593E29CD, xmp.iid:2DD4D85D88E0E011931C9525593E29CD, xmp.iid:2ED4D85D88E0E011931C9525593E29CD, xmp.iid:0292AC4BA8E0E011A41AEDDCA12149BD, xmp.iid:0692AC4BA8E0E011A41AEDDCA12149BD, xmp.iid:0792AC4BA8E0E011A41AEDDCA12149BD, xmp.iid:2E97DC8FBEE0E011980DBCC2172670D4, xmp.iid:2F97DC8FBEE0E011980DBCC2172670D4, xmp.iid:45589F01C2E0E0118F64A4A69B43385B, xmp.iid:48589F01C2E0E0118F64A4A69B43385B, xmp.iid:9351BD74F0E2E0119CCDF0257F4911DE, xmp.iid:9451BD74F0E2E0119CCDF0257F4911DE, xmp.iid:9751BD74F0E2E0119CCDF0257F4911DE, xmp.iid:9851BD74F0E2E0119CCDF0257F4911DE, xmp.iid:4BC5D7FA7AE4E011BC4DCAF1B6D0CC65, xmp.iid:4CC5D7FA7AE4E011BC4DCAF1B6D0CC65, xmp.iid:4DC5D7FA7AE4E011BC4DCAF1B6D0CC65, xmp.iid:4EC5D7FA7AE4E011BC4DCAF1B6D0CC65, xmp.iid:4FC5D7FA7AE4E011BC4DCAF1B6D0CC65, xmp.iid:50C5D7FA7AE4E011BC4DCAF1B6D0CC65, xmp.iid:51C5D7FA7AE4E011BC4DCAF1B6D0CC65, xmp.iid:A886061A8CE4E0118882A765A9EB93C3, xmp.iid:A986061A8CE4E0118882A765A9EB93C3, xmp.iid:AA86061A8CE4E0118882A765A9EB93C3, xmp.iid:AE86061A8CE4E0118882A765A9EB93C3, xmp.iid:AF86061A8CE4E0118882A765A9EB93C3, xmp.iid:F74EDD96B4E4E0118882A765A9EB93C3, xmp.iid:F84EDD96B4E4E0118882A765A9EB93C3, xmp.iid:F94EDD96B4E4E0118882A765A9EB93C3, xmp.iid:518C7814BAE4E0118882A765A9EB93C3, xmp.iid:E79A47D1BAE4E011800AF8FB5A25E055, xmp.iid:E89A47D1BAE4E011800AF8FB5A25E055, xmp.iid:CB0CF9B30AE6E011849AEAA40185C3FD, xmp.iid:CC0CF9B30AE6E011849AEAA40185C3FD, xmp.iid:CD0CF9B30AE6E011849AEAA40185C3FD, xmp.iid:CE0CF9B30AE6E011849AEAA40185C3FD, xmp.iid:CF0CF9B30AE6E011849AEAA40185C3FD, xmp.iid:91216F7A13E6E011849AEAA40185C3FD, xmp.iid:6D4CB408FAF4E0118EF3D34B6422C603, xmp.iid:6E4CB408FAF4E0118EF3D34B6422C603, xmp.iid:6F4CB408FAF4E0118EF3D34B6422C603, xmp.iid:704CB408FAF4E0118EF3D34B6422C603, xmp.iid:5250FA89DAF5E011A85887307F40E2CF, xmp.iid:4E25D369F0F5E01187259CA9CC719F8A, xmp.iid:4F25D369F0F5E01187259CA9CC719F8A, xmp.iid:5025D369F0F5E01187259CA9CC719F8A, xmp.iid:5DBCD31535F6E011AA84F5E617E181B7
History When                    : 2010:05:12 16:00:16-07:00, 2010:05:12 16:00:17-07:00, 2010:05:12 16:06:32-07:00, 2010:05:12 16:10:47-07:00, 2010:05:12 16:10:48-07:00, 2010:05:12 16:22:36-07:00, 2010:06:01 13:41:52-07:00, 2010:06:01 14:52:48-07:00, 2010:06:01 14:53:21-07:00, 2010:06:01 14:55:48-07:00, 2010:06:01 15:00:11-07:00, 2010:06:01 15:12:40-07:00, 2010:06:01 15:22:02-07:00, 2010:06:01 15:45:43-07:00, 2010:06:01 15:47:41-07:00, 2010:06:01 16:25:47-07:00, 2010:06:01 16:28:06-07:00, 2010:06:09 13:46:21-07:00, 2010:06:09 13:47:53-07:00, 2010:06:09 13:50:42-07:00, 2010:06:09 13:54:02-07:00, 2010:06:09 13:54:03-07:00, 2010:10:26 16:23:42-07:00, 2010:10:26 16:50:46-07:00, 2010:10:26 16:51:29-07:00, 2010:10:26 16:54:51-07:00, 2011:07:22 10:37:04-07:00, 2011:07:22 10:37:06-07:00, 2011:07:22 11:51:25-07:00, 2011:07:22 15:11:04-07:00, 2011:07:25 16:44:57-07:00, 2011:07:26 18:05:49-07:00, 2011:08:04 18:15:51-07:00, 2011:08:05 13:18:02-07:00, 2011:08:08 18:21:52-07:00, 2011:08:09 17:58:13-07:00, 2011:08:10 12:01:16-07:00, 2011:08:10 13:56:57-07:00, 2011:08:10 17:52:21-07:00, 2011:08:11 10:28:52-07:00, 2011:08:11 11:25:40-07:00, 2011:08:11 11:31:49-07:00, 2011:08:11 14:30:07-07:00, 2011:08:11 14:36:40-07:00, 2011:08:11 14:59:22-07:00, 2011:08:11 16:53:05-07:00, 2011:08:11 17:02:15-07:00, 2011:08:12 11:11:28-07:00, 2011:08:12 11:18:20-07:00, 2011:08:15 17:59:39-07:00, 2011:08:16 12:44:20-07:00, 2011:08:16 14:07:48-07:00, 2011:08:16 14:13:13-07:00, 2011:08:19 16:38:15-07:00, 2011:08:22 13:16:53-07:00, 2011:08:22 14:28:04-07:00, 2011:08:22 18:05:33-07:00, 2011:08:23 11:23:25-07:00, 2011:08:23 11:25:12-07:00, 2011:09:13 17:39:16-07:00, 2011:09:13 18:10:47-07:00, 2011:09:14 17:18:32-07:00, 2011:09:15 17:24:14-07:00, 2011:09:15 18:15:48-07:00, 2011:09:15 18:16:39-07:00, 2011:09:16 10:21:51-07:00, 2011:09:16 10:25:59-07:00, 2011:09:16 10:33:56-07:00, 2011:09:16 10:33:57-07:00, 2011:09:16 14:10:24-07:00, 2011:09:16 15:38:34-07:00, 2011:09:16 16:32:32-07:00, 2011:09:16 17:00:31-07:00, 2011:09:16 17:04:01-07:00, 2011:09:16 17:14:27-07:00, 2011:09:16 17:27:04-07:00, 2011:09:19 14:12:25-07:00, 2011:09:19 14:15:35-07:00, 2011:09:19 14:28:35-07:00, 2011:09:19 14:46:27-07:00, 2011:09:21 10:56:06-07:00, 2011:09:21 11:31:56-07:00, 2011:09:21 11:40:32-07:00, 2011:09:21 11:59:20-07:00, 2011:09:21 12:41:32-07:00, 2011:09:21 12:54:46-07:00, 2011:09:21 12:57:14-07:00, 2011:09:21 12:58:40-07:00, 2011:09:21 13:07:14-07:00, 2011:09:21 13:07:15-07:00, 2011:09:21 15:37:25-07:00, 2011:09:21 16:53:34-07:00, 2011:09:21 18:09:35-07:00, 2011:09:21 18:15:45-07:00, 2011:09:21 18:15:46-07:00, 2011:09:21 18:28:06-07:00, 2011:09:22 15:24:26+08:00, 2011:09:22 15:25:50+08:00, 2011:09:23 11:24:26-07:00, 2011:09:23 11:24:26-07:00, 2011:09:23 11:31-07:00, 2011:09:23 11:33:16-07:00, 2011:09:23 11:35:08-07:00, 2011:09:23 11:40:15-07:00, 2011:10:12 10:49:17-07:00, 2011:10:12 10:54:38-07:00, 2011:10:12 10:58:54-07:00, 2011:10:12 11:00:59-07:00, 2011:10:13 15:03:40-07:00, 2011:10:13 16:09:33-07:00, 2011:10:13 16:15:48-07:00, 2011:10:13 16:15:48-07:00, 2011:10:14 16:21:54+08:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /metadata, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /metadata, /, /
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 300.00
Manifest Placed Y Resolution    : 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 72.00, 72.00, 96.00, 72.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 300.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : xmp.iid:809D0915FCF4E0119E1A978997CE9FE6, xmp.iid:1372DD0C8B58DF11878AF2C253DDCD52, uuid:75A1375BB636DF119F59BFAAF702F212, xmp.iid:2285DA35E0B6E011A21D94A2F7DDA8F4, xmp.iid:018011740720681192B0CC0EB0158788, xmp.iid:9CA9221F91216811871FDAF417058239, xmp.iid:9BA9221F91216811871FDAF417058239, xmp.iid:D7163DB8E2CCE011A395D3EEEA2F27DB, uuid:757b79f8-fa08-11d9-9634-db5cd49ad058, xmp.iid:76860EABF4F4E011BCF8A99F8A122F43, xmp.iid:52021D59F4F4E0119D03FFB649F957B9, xmp.iid:53021D59F4F4E0119D03FFB649F957B9, xmp.iid:54021D59F4F4E0119D03FFB649F957B9, xmp.iid:55021D59F4F4E0119D03FFB649F957B9, xmp.iid:56021D59F4F4E0119D03FFB649F957B9, uuid:757b79f8-fa08-11d9-9634-db5cd49ad058, xmp.iid:9D62C00257DEE011B12DE3E68DC71B05, xmp.iid:01703AFAC83AE011A4D2D995CCDE6796, xmp.iid:D21634525C4BE011B5DABC3F7215568F, uuid:CA8115DC0955DD1197EA9F8BADD09E14, xmp.iid:522A740A324CE0118AEDB1F96A94051B, xmp.iid:8B77443B684AE0119967DDA02C814A1C, uuid:AB771C967C48DD11A967F2D595E78A32, xmp.iid:2A6AB7C07BE4E0119BAAE2F2A0B05783, xmp.iid:2A6AB7C07BE4E0119BAAE2F2A0B05783, xmp.iid:2A6AB7C07BE4E0119BAAE2F2A0B05783, xmp.iid:BEC3FDA481E4E0118A82CD2730964364, xmp.iid:AD0C151C8AE4E011BA3CCE033EB55089, xmp.iid:0B6724FE9CE4E0118EF1B093D4F8D068, xmp.iid:6FC82B0E9DE4E011917C940F54D60F4A, xmp.iid:35D0084067DEE011BCCF880F4C5BBE06, xmp.iid:02C4FB5A67DEE0118984F8BDA1972357, xmp.iid:A33507733EC8E01193D9987AD83A3B88, uuid:B6F63DC7CD46DD119D8CE749BDD6CD01, uuid:3E3711D6E046DD119D8CE749BDD6CD01, uuid:18FF61FDC547DD119E01ED9A8B6749F1, uuid:6DE96DADC188DC11A014F42E98B33B80, uuid:71E96DADC188DC11A014F42E98B33B80, uuid:C7CC65A2C388DC11A014F42E98B33B80, uuid:C4A5075A5F48DD11A967F2D595E78A32, uuid:80F97EF5E24CDC11921B81FC3A831900, uuid:84F97EF5E24CDC11921B81FC3A831900, uuid:40674894EDBCDE1185D1D9D309EE1DFE, uuid:43674894EDBCDE1185D1D9D309EE1DFE, uuid:9704D86E7F4FDC11A05FE732C1FAED7F, uuid:555EA4107B4FDC11A05FE732C1FAED7F, uuid:555EA4107B4FDC11A05FE732C1FAED7F, uuid:9704D86E7F4FDC11A05FE732C1FAED7F, uuid:595EA4107B4FDC11A05FE732C1FAED7F, uuid:ed645c8c-4cba-11da-bf84-f59405901279, uuid:31c0b145-4d52-11da-9063-86e0e23ed818, uuid:4e2f0bb9-4cbb-11da-bf84-f59405901279, uuid:ed645c8c-4cba-11da-bf84-f59405901279, uuid:4e2f0bb9-4cbb-11da-bf84-f59405901279, uuid:5baa3ab9-f546-11d9-80f7-b1c380115801, xmp.iid:A4E774409959E011BE02E21726B7653A
Manifest Reference Document ID  : uuid:554A54FA341411DFB6BFA09E624A1EDB, uuid:FC2C9D0BB636DF11B65DFC809A52A4D0, uuid:74A1375BB636DF119F59BFAAF702F212, xmp.did:BA449E5A822068119109E1FEFF7D547C, xmp.did:018011740720681192B0CC0EB0158788, xmp.did:01801174072068118F62E749F9B02060, xmp.did:3AF5936D3B2068118DBBFDE52966E4AD, uuid:39431B810353DF11BDE5CD7014F5C8C9, adobe:docid:photoshop:49f3ef52-fa08-11d9-9634-db5cd49ad058, xmp.did:5AE7AA33F4F4E011B3C7B902C5CFD3BB, xmp.did:52021D59F4F4E0119D03FFB649F957B9, xmp.did:53021D59F4F4E0119D03FFB649F957B9, xmp.did:54021D59F4F4E0119D03FFB649F957B9, xmp.did:55021D59F4F4E0119D03FFB649F957B9, xmp.did:56021D59F4F4E0119D03FFB649F957B9, adobe:docid:photoshop:49f3ef52-fa08-11d9-9634-db5cd49ad058, xmp.did:9D62C00257DEE011B12DE3E68DC71B05, xmp.did:01703AFAC83AE011A4D2D995CCDE6796, xmp.did:D21634525C4BE011B5DABC3F7215568F, uuid:C98115DC0955DD1197EA9F8BADD09E14, xmp.did:522A740A324CE0118AEDB1F96A94051B, xmp.did:09C84CFFF739E011B2A7DAEFC4717D24, uuid:AA771C967C48DD11A967F2D595E78A32, xmp.did:2A6AB7C07BE4E0119BAAE2F2A0B05783, xmp.did:2A6AB7C07BE4E0119BAAE2F2A0B05783, xmp.did:2A6AB7C07BE4E0119BAAE2F2A0B05783, xmp.did:BEC3FDA481E4E0118A82CD2730964364, xmp.did:AD0C151C8AE4E011BA3CCE033EB55089, xmp.did:0B6724FE9CE4E0118EF1B093D4F8D068, xmp.did:6FC82B0E9DE4E011917C940F54D60F4A, xmp.did:35D0084067DEE011BCCF880F4C5BBE06, xmp.did:02C4FB5A67DEE0118984F8BDA1972357, xmp.did:A33507733EC8E01193D9987AD83A3B88, uuid:B5F63DC7CD46DD119D8CE749BDD6CD01, uuid:3B3711D6E046DD119D8CE749BDD6CD01, uuid:17FF61FDC547DD119E01ED9A8B6749F1, uuid:6CE96DADC188DC11A014F42E98B33B80, uuid:70E96DADC188DC11A014F42E98B33B80, uuid:C6CC65A2C388DC11A014F42E98B33B80, uuid:C3A5075A5F48DD11A967F2D595E78A32, uuid:7FF97EF5E24CDC11921B81FC3A831900, uuid:83F97EF5E24CDC11921B81FC3A831900, uuid:3F674894EDBCDE1185D1D9D309EE1DFE, uuid:42674894EDBCDE1185D1D9D309EE1DFE, uuid:9604D86E7F4FDC11A05FE732C1FAED7F, uuid:545EA4107B4FDC11A05FE732C1FAED7F, uuid:545EA4107B4FDC11A05FE732C1FAED7F, uuid:9604D86E7F4FDC11A05FE732C1FAED7F, uuid:585EA4107B4FDC11A05FE732C1FAED7F, adobe:docid:photoshop:ed645c8b-4cba-11da-bf84-f59405901279, adobe:docid:photoshop:31c0b141-4d52-11da-9063-86e0e23ed818, adobe:docid:photoshop:4e2f0bb6-4cbb-11da-bf84-f59405901279, adobe:docid:photoshop:ed645c8b-4cba-11da-bf84-f59405901279, adobe:docid:photoshop:4e2f0bb6-4cbb-11da-bf84-f59405901279, adobe:docid:photoshop:3d378fe2-f545-11d9-80f7-b1c380115801, xmp.did:014944AE732068119109B714EDF65AC6
Doc Change Count                : 5104
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Count                      : 140
Creator                         : Adobe InDesign CS4 (6.0)

EXIF Metadata provided by EXIF.tools

D Link IR835A1 Wireless N750 Dual-Band Router User Manual

D Link Corporation Wireless N750 Dual-Band Router

User Manual

FCC ID Filing: KA2IR835A1

Navigation menu

Namespaces

Views

Navigation